commit fbd83006 upstream.

Linux fails to boot as a guest with a QEMU CD-ROM:

[    4.439488] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100
[    4.443649] ata2.00: configured for MWDMA2
[    4.450267] scsi 1:0:0:0: CD-ROM            QEMU     QEMU CD-ROM      0.8. PQ: 0 ANSI: 5
[    4.464317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    4.464319] ata2.00: BMDMA stat 0x5
[    4.464339] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in
[    4.464339]          Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[    4.464341] ata2.00: status: { DRDY DRQ }
[    4.465864] ata2: soft resetting link
[    4.625971] ata2.00: configured for MWDMA2
[    4.628290] ata2: EH complete
[    4.646670] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    4.646671] ata2.00: BMDMA stat 0x5
[    4.646683] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in
[    4.646683]          Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[    4.646685] ata2.00: status: { DRDY DRQ }
[    4.648193] ata2: soft resetting link

...

Fix this by suppressing VPD inquiry for this device.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a621bac3 upstream.

When SCSI was written, all commands coming from the filesystem
(REQ_TYPE_FS commands) had data.  This meant that our signal for needing
to complete the command was the number of bytes completed being equal to
the number of bytes in the request.  Unfortunately, with the advent of
flush barriers, we can now get zero length REQ_TYPE_FS commands, which
confuse this logic because they satisfy the condition every time.  This
means they never get retried even for retryable conditions, like UNIT
ATTENTION because we complete them early assuming they're done.  Fix
this by special casing the early completion condition to recognise zero
length commands with errors and let them drop through to the retry code.
Reported-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Tested-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a2151374 upstream.

Commit 5e3ca2b3 ("regulator: Try to resolve regulators supplies on
registration") added a call to regulator_resolve_supply() within
regulator_register() where the regulator_list_mutex is held. This causes
a deadlock to occur on the Tegra114 Dalmore board when the palmas PMIC
is registered because regulator_register_resolve_supply() calls
regulator_dev_lookup() which may try to acquire the regulator_list_mutex
again.

Fix this by releasing the mutex before calling
regulator_register_resolve_supply() and update the error exit path to
ensure the mutex is released on an error.

[Made commit message more legible -- broonie]
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7049de65 upstream.

Commit b9b06cb6
("IB/hfi1: Fix missing lock/unlock in verbs drain callback")
added a spin lock.

Unfortunately, the new lock code can be called from a base
level interrupt state, and an interrupt that can get stacked
will attempt to get the same lock.

Fix by using the flag save/restore spin lock variation.

Cc: stable@vger.kernel.org # 4.6+
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6979cd54 upstream.

A recent cleanup removed the only user of the 'kms' variable in
msm_preclose(), causing a harmless compiler warning:

drivers/gpu/drm/msm/msm_drv.c: In function 'msm_preclose':
drivers/gpu/drm/msm/msm_drv.c:468:18: error: unused variable 'kms' [-Werror=unused-variable]

This removes the variable as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4016260b ("drm/msm: fix bug after preclose removal")
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d3aa7fe upstream.

We don't write back stale inodes so we should skip them in
xfs_iflush_cluster, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 51b07f30 upstream.

Some careless idiot(*) wrote crap code in commit 1a3e8f3d ("xfs:
convert inode cache lookups to use RCU locking") back in late 2010,
and so xfs_iflush_cluster checks the wrong inode for whether it is
still valid under RCU protection. Fix it to lock and check the
correct inode.

(*) Careless-idiot: Dave Chinner <dchinner@redhat.com>
Discovered-by: Brain Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b1438f47 upstream.

When a failure due to an inode buffer occurs, the error handling
fails to abort the inode writeback correctly. This can result in the
inode being reclaimed whilst still in the AIL, leading to
use-after-free situations as well as filesystems that cannot be
unmounted as the inode log items left in the AIL never get removed.

Fix this by ensuring fatal errors from xfs_imap_to_bp() result in
the inode flush being aborted correctly.
Reported-by: Shyam Kaushik <shyam@zadarastorage.com>
Diagnosed-by: Shyam Kaushik <shyam@zadarastorage.com>
Tested-by: Shyam Kaushik <shyam@zadarastorage.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8179c036 upstream.

Joe Lawrence reported a list_add corruption with 4.6-rc1 when
testing some custom md administration code that made it's own
block device nodes for the md array. The simple test loop of:

for i in {0..100}; do
	mknod --mode=0600 $tmp/tmp_node b $MAJOR $MINOR
	mdadm --detail --export $tmp/tmp_node > /dev/null
	rm -f $tmp/tmp_node
done


Would produce this warning in bd_acquire() when mdadm opened the
device node:

list_add double add: new=ffff88043831c7b8, prev=ffff8804380287d8, next=ffff88043831c7b8.

And then produce this from bd_forget from kdevtmpfs evicting a block
dev inode:

list_del corruption. prev->next should be ffff8800bb83eb10, but was ffff88043831c7b8

This is a regression caused by commit c19b3b05 ("xfs: mode di_mode
to vfs inode"). The issue is that xfs_inactive() frees the
unlinked inode, and the above commit meant that this freeing zeroed
the mode in the struct inode. The problem is that after evict() has
called ->evict_inode, it expects the i_mode to be intact so that it
can call bd_forget() or cd_forget() to drop the reference to the
block device inode attached to the XFS inode.

In reality, the only thing we do in xfs_fs_evict_inode() that is not
generic is call xfs_inactive(). We can move the xfs_inactive() call
to xfs_fs_destroy_inode() without any problems at all, and this
will leave the VFS inode intact until it is completely done with it.

So, remove xfs_fs_evict_inode(), and do the work it used to do in
->destroy_inode instead.
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad747e3b upstream.

Commit 96f859d5 ("libxfs: pack the agfl header structure so
XFS_AGFL_SIZE is correct") allowed the freelist to use the empty
slot at the end of the freelist on 64 bit systems that was not
being used due to sizeof() rounding up the structure size.

This has caused versions of xfs_repair prior to 4.5.0 (which also
has the fix) to report this as a corruption once the filesystem has
been grown. Older kernels can also have problems (seen from a whacky
container/vm management environment) mounting filesystems grown on a
system with a newer kernel than the vm/container it is deployed on.

To avoid this problem, change the initial free list indexes not to
wrap across the end of the AGFL, hence avoiding the initialisation
of agf_fllast to the last index in the AGFL.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d0a58e83 upstream.

Today, a kernel which refuses to mount a filesystem read-write
due to unknown ro-compat features can still transition to read-write
via the remount path.  The old kernel is most likely none the wiser,
because it's unaware of the new feature, and isn't using it.  However,
writing to the filesystem may well corrupt metadata related to that
new feature, and moving to a newer kernel which understand the feature
will have problems.

Right now the only ro-compat feature we have is the free inode btree,
which showed up in v3.16.  It would be good to push this back to
all the active stable kernels, I think, so that if anyone is using
newer mkfs (which enables the finobt feature) with older kernel
releases, they'll be protected.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c87bf431 upstream.

Enabling CONFIG_GCOV_PROFILE_ALL produces us a lot of warnings like

lib/lz4/lz4hc_compress.c: In function 'lz4_compresshcctx':
lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1504 bytes is larger than 1024 bytes [-Wframe-larger-than=]

After some investigation, I found that this behavior started with gcc-4.9,
and opened https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69702.
A suggested workaround for it is to use the -fno-tree-loop-im
flag that turns off one of the optimization stages in gcc, so the
code runs a little slower but does not use excessive amounts
of stack.

We could make this conditional on the gcc version, but I could not
find an easy way to do this in Kbuild and the benefit would be
fairly small, given that most of the gcc version in production are
affected now.

I'm marking this for 'stable' backports because it addresses a bug
with code generation in gcc that exists in all kernel versions
with the affected gcc releases.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0798d3c0 upstream.

If page_move_anon_rmap() is refiling a pmd-splitted THP mapped in a tail
page from a pte, the "address" must be THP aligned in order for the
page->index bugcheck to pass in the CONFIG_DEBUG_VM=y builds.

Link: http://lkml.kernel.org/r/1464253620-106404-1-git-send-email-kirill.shutemov@linux.intel.com
Fixes: 6d0a07ed ("mm: thp: calculate the mapcount correctly for THP pages during WP faults")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 65a9f31c upstream.

After commit 21a59991 ("scripts/package/Makefile: rpmbuild is needed
for rpm targets"), it is no longer possible to specify RPMOPTS.
For example, we can no longer able to control _topdir using the following
make command.
make RPMOPTS="--define '_topdir /home/xyz/workspace/'" binrpm-pkg

Fixes: 21a59991 ("scripts/package/Makefile: rpmbuild is needed for rpm targets")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3017cd63 upstream.

With netconsole (at least) the pr_err("...  disablingn") call can
recurse back into the dma-debug code, where it'll try to grab
free_entries_lock again.  Avoid the problem by doing the printk after
dropping the lock.

Link: http://lkml.kernel.org/r/1463678421-18683-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3a17fb32 upstream.

Grygorii Strashko reports:

 The PM runtime will be left disabled for the device if its
 .suspend_late() callback fails and async suspend is not allowed
 for this device. In this case device will not be added in
 dpm_late_early_list and dpm_resume_early() will ignore this
 device, as result PM runtime will be disabled for it forever
 (side effect: after 8 subsequent failures for the same device
 the PM runtime will be reenabled due to disable_depth overflow).

To fix this problem, add devices to dpm_late_early_list regardless
of whether or not device_suspend_late() returns errors for them.

That will ensure failures in there to be handled consistently for
all devices regardless of their async suspend/resume status.
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ade8febd upstream.

Since the patch "NFS: Allow multiple commit requests in flight per file"
we can run multiple simultaneous commits on the same inode.  This
introduced a race over collecting pages to commit that made it possible
to call nfs_init_commit() with an empty list - which causes crashes like
the one below.

The fix is to catch this race and avoid calling nfs_init_commit and
initiate_commit when there is no work to do.

Here is the crash:

[600522.076832] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
[600522.078475] IP: [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs]
[600522.078745] PGD 4272b1067 PUD 4272cb067 PMD 0
[600522.078972] Oops: 0000 [#1] SMP
[600522.079204] Modules linked in: nfsv3 nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache dcdbas ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw vmw_vsock_vmci_transport vsock bonding ipmi_devintf ipmi_msghandler coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ppdev vmw_balloon parport_pc parport acpi_cpufreq vmw_vmci i2c_piix4 shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm crc32c_intel serio_raw vmxnet3
[600522.081380]  vmw_pvscsi ata_generic pata_acpi
[600522.081809] CPU: 3 PID: 15667 Comm: /usr/bin/python Not tainted 4.1.9-100.pd.88.el7.x86_64 #1
[600522.082281] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014
[600522.082814] task: ffff8800bbbfa780 ti: ffff88042ae84000 task.ti: ffff88042ae84000
[600522.083378] RIP: 0010:[<ffffffffa0479e72>]  [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs]
[600522.083973] RSP: 0018:ffff88042ae87438  EFLAGS: 00010246
[600522.084571] RAX: 0000000000000000 RBX: ffff880003485e40 RCX: ffff88042ae87588
[600522.085188] RDX: 0000000000000000 RSI: ffff88042ae874b0 RDI: ffff880003485e40
[600522.085756] RBP: ffff88042ae87448 R08: ffff880003486010 R09: ffff88042ae874b0
[600522.086332] R10: 0000000000000000 R11: 0000000000000005 R12: ffff88042ae872d0
[600522.086905] R13: ffff88042ae874b0 R14: ffff880003485e40 R15: ffff88042704c840
[600522.087484] FS:  00007f4728ff2740(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000
[600522.088070] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[600522.088663] CR2: 0000000000000040 CR3: 000000042b6aa000 CR4: 00000000001406e0
[600522.089327] Stack:
[600522.089926]  0000000000000001 ffff88042ae87588 ffff88042ae874f8 ffffffffa04f09fa
[600522.090549]  0000000000017840 0000000000017840 ffff88042ae87588 ffff8803258d9930
[600522.091169]  ffff88042ae87578 ffffffffa0563d80 0000000000000000 ffff88042704c840
[600522.091789] Call Trace:
[600522.092420]  [<ffffffffa04f09fa>] pnfs_generic_commit_pagelist+0x1da/0x320 [nfsv4]
[600522.093052]  [<ffffffffa0563d80>] ? ff_layout_commit_prepare_v3+0x30/0x30 [nfs_layout_flexfiles]
[600522.093696]  [<ffffffffa0562645>] ff_layout_commit_pagelist+0x15/0x20 [nfs_layout_flexfiles]
[600522.094359]  [<ffffffffa047bc78>] nfs_generic_commit_list+0xe8/0x120 [nfs]
[600522.095032]  [<ffffffffa047bd6a>] nfs_commit_inode+0xba/0x110 [nfs]
[600522.095719]  [<ffffffffa046ac54>] nfs_release_page+0x44/0xd0 [nfs]
[600522.096410]  [<ffffffff811a8122>] try_to_release_page+0x32/0x50
[600522.097109]  [<ffffffff811bd4f1>] shrink_page_list+0x961/0xb30
[600522.097812]  [<ffffffff811bdced>] shrink_inactive_list+0x1cd/0x550
[600522.098530]  [<ffffffff811bea65>] shrink_lruvec+0x635/0x840
[600522.099250]  [<ffffffff811bed60>] shrink_zone+0xf0/0x2f0
[600522.099974]  [<ffffffff811bf312>] do_try_to_free_pages+0x192/0x470
[600522.100709]  [<ffffffff811bf6ca>] try_to_free_pages+0xda/0x170
[600522.101464]  [<ffffffff811b2198>] __alloc_pages_nodemask+0x588/0x970
[600522.102235]  [<ffffffff811fbbd5>] alloc_pages_vma+0xb5/0x230
[600522.103000]  [<ffffffff813a1589>] ? cpumask_any_but+0x39/0x50
[600522.103774]  [<ffffffff811d6115>] wp_page_copy.isra.55+0x95/0x490
[600522.104558]  [<ffffffff810e3438>] ? __wake_up+0x48/0x60
[600522.105357]  [<ffffffff811d7d3b>] do_wp_page+0xab/0x4f0
[600522.106137]  [<ffffffff810a1bbb>] ? release_task+0x36b/0x470
[600522.106902]  [<ffffffff8126dbd7>] ? eventfd_ctx_read+0x67/0x1c0
[600522.107659]  [<ffffffff811da2a8>] handle_mm_fault+0xc78/0x1900
[600522.108431]  [<ffffffff81067ef1>] __do_page_fault+0x181/0x420
[600522.109173]  [<ffffffff811446a6>] ? __audit_syscall_exit+0x1e6/0x280
[600522.109893]  [<ffffffff810681c0>] do_page_fault+0x30/0x80
[600522.110594]  [<ffffffff81024f36>] ? syscall_trace_leave+0xc6/0x120
[600522.111288]  [<ffffffff81790a58>] page_fault+0x28/0x30
[600522.111947] Code: 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 4c 8d 87 d0 01 00 00 48 89 e5 53 48 89 fb 48 83 ec 08 4c 8b 0e 49 8b 41 18 4c 39 ce <48> 8b 40 40 4c 8b 50 30 74 24 48 8b 87 d0 01 00 00 48 8b 7e 08
[600522.113343] RIP  [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs]
[600522.114003]  RSP <ffff88042ae87438>
[600522.114636] CR2: 0000000000000040

Fixes: af7cf057 (NFS: Allow multiple commit requests in flight per file)
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 935244cd upstream.

Currently, in ext4_mb_init(), there's a loop like the following:

  do {
    ...
    offset += 1 << (sb->s_blocksize_bits - i);
    i++;
  } while (i <= sb->s_blocksize_bits + 1);

Note that the updated offset is used in the loop's next iteration only.

However, at the last iteration, that is at i == sb->s_blocksize_bits + 1,
the shift count becomes equal to (unsigned)-1 > 31 (c.f. C99 6.5.7(3))
and UBSAN reports

  UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2621:15
  shift exponent 4294967295 is too large for 32-bit type 'int'
  [...]
  Call Trace:
   [<ffffffff818c4d25>] dump_stack+0xbc/0x117
   [<ffffffff818c4c69>] ? _atomic_dec_and_lock+0x169/0x169
   [<ffffffff819411ab>] ubsan_epilogue+0xd/0x4e
   [<ffffffff81941cac>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
   [<ffffffff81941ab1>] ? __ubsan_handle_load_invalid_value+0x158/0x158
   [<ffffffff814b6dc1>] ? kmem_cache_alloc+0x101/0x390
   [<ffffffff816fc13b>] ? ext4_mb_init+0x13b/0xfd0
   [<ffffffff814293c7>] ? create_cache+0x57/0x1f0
   [<ffffffff8142948a>] ? create_cache+0x11a/0x1f0
   [<ffffffff821c2168>] ? mutex_lock+0x38/0x60
   [<ffffffff821c23ab>] ? mutex_unlock+0x1b/0x50
   [<ffffffff814c26ab>] ? put_online_mems+0x5b/0xc0
   [<ffffffff81429677>] ? kmem_cache_create+0x117/0x2c0
   [<ffffffff816fcc49>] ext4_mb_init+0xc49/0xfd0
   [...]

Observe that the mentioned shift exponent, 4294967295, equals (unsigned)-1.

Unless compilers start to do some fancy transformations (which at least
GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the
such calculated value of offset is never used again.

Silence UBSAN by introducing another variable, offset_incr, holding the
next increment to apply to offset and adjust that one by right shifting it
by one position per loop iteration.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b5cb316c upstream.

Currently, in mb_find_order_for_block(), there's a loop like the following:

  while (order <= e4b->bd_blkbits + 1) {
    ...
    bb += 1 << (e4b->bd_blkbits - order);
  }

Note that the updated bb is used in the loop's next iteration only.

However, at the last iteration, that is at order == e4b->bd_blkbits + 1,
the shift count becomes negative (c.f. C99 6.5.7(3)) and UBSAN reports

  UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1281:11
  shift exponent -1 is negative
  [...]
  Call Trace:
   [<ffffffff818c4d35>] dump_stack+0xbc/0x117
   [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
   [<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e
   [<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
   [<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158
   [<ffffffff816e93a0>] ? ext4_mb_generate_from_pa+0x590/0x590
   [<ffffffff816502c8>] ? ext4_read_block_bitmap_nowait+0x598/0xe80
   [<ffffffff816e7b7e>] mb_find_order_for_block+0x1ce/0x240
   [...]

Unless compilers start to do some fancy transformations (which at least
GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the
such calculated value of bb is never used again.

Silence UBSAN by introducing another variable, bb_incr, holding the next
increment to apply to bb and adjust that one by right shifting it by one
position per loop iteration.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 74177f55 upstream.

When filesystem is corrupted in the right way, it can happen
ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we
subsequently remove inode from the in-memory orphan list. However this
deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we
leave i_orphan list_head with a stale content. Later we can look at this
content causing list corruption, oops, or other issues. The reported
trace looked like:

WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100()
list_del corruption, 0000000061c1d6e0->next is LIST_POISON1
0000000000100100)
CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250
Stack:
 60462947 62219960 602ede24 62219960
 602ede24 603ca293 622198f0 602f02eb
 62219950 6002c12c 62219900 601b4d6b
Call Trace:
 [<6005769c>] ? vprintk_emit+0x2dc/0x5c0
 [<602ede24>] ? printk+0x0/0x94
 [<600190bc>] show_stack+0xdc/0x1a0
 [<602ede24>] ? printk+0x0/0x94
 [<602ede24>] ? printk+0x0/0x94
 [<602f02eb>] dump_stack+0x2a/0x2c
 [<6002c12c>] warn_slowpath_common+0x9c/0xf0
 [<601b4d6b>] ? __list_del_entry+0x6b/0x100
 [<6002c254>] warn_slowpath_fmt+0x94/0xa0
 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0
 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0
 [<60023ebf>] ? set_signals+0x3f/0x50
 [<600a205a>] ? kmem_cache_free+0x10a/0x180
 [<602f4e88>] ? mutex_lock+0x18/0x30
 [<601b4d6b>] __list_del_entry+0x6b/0x100
 [<601177ec>] ext4_orphan_del+0x22c/0x2f0
 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0
 [<6010b973>] ? ext4_truncate+0x383/0x390
 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0
 [<6001bb50>] ? copy_from_user+0x0/0xb0
 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0
 [<60072c4f>] generic_perform_write+0xaf/0x1e0
 [<600c4166>] ? file_update_time+0x46/0x110
 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0
 [<6010030f>] ext4_file_write_iter+0x15f/0x470
 [<60094e10>] ? unlink_file_vma+0x0/0x70
 [<6009b180>] ? unlink_anon_vmas+0x0/0x260
 [<6008f169>] ? free_pgtables+0xb9/0x100
 [<600a6030>] __vfs_write+0xb0/0x130
 [<600a61d5>] vfs_write+0xa5/0x170
 [<600a63d6>] SyS_write+0x56/0xe0
 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0
 [<6001b698>] handle_syscall+0x68/0x90
 [<6002633d>] userspace+0x4fd/0x600
 [<6002274f>] ? save_registers+0x1f/0x40
 [<60028bd7>] ? arch_prctl+0x177/0x1b0
 [<60017bd5>] fork_handler+0x85/0x90

Fix the problem by using list_del_init() as we always should with
i_orphan list.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ff0bc084 upstream.

A failed call to dqget() returns an ERR_PTR() and not null. Fix
the check in ext4_ioctl_setproject() to handle this correctly.

Fixes: 9b7365fc ("ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7827a7f6 upstream.

Instead of just printing warning messages, if the orphan list is
corrupted, declare the file system is corrupted.  If there are any
reserved inodes in the orphaned inode list, declare the file system
corrupted and stop right away to avoid doing more potential damage to
the file system.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9eb13a9 upstream.

If the orphaned inode list contains inode #5, ext4_iget() returns a
bad inode (since the bootloader inode should never be referenced
directly).  Because of the bad inode, we end up processing the inode
repeatedly and this hangs the machine.

This can be reproduced via:

   mke2fs -t ext4 /tmp/foo.img 100
   debugfs -w -R "ssv last_orphan 5" /tmp/foo.img
   mount -o loop /tmp/foo.img /mnt

(But don't do this if you are using an unpatched kernel if you care
about the system staying functional.  :-)

This bug was found by the port of American Fuzzy Lop into the kernel
to find file system problems[1].  (Since it *only* happens if inode #5
shows up on the orphan list --- 3, 7, 8, etc. won't do it, it's not
surprising that AFL needed two hours before it found it.)

[1] http://events.linuxfoundation.org/sites/events/files/slides/AFL%20filesystem%20fuzzing%2C%20Vault%202016_0.pdf

Reported by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 06bd3c36 upstream.

Huang has reported that in his powerfail testing he is seeing stale
block contents in some of recently allocated blocks although he mounts
ext4 in data=ordered mode. After some investigation I have found out
that indeed when delayed allocation is used, we don't add inode to
transaction's list of inodes needing flushing before commit. Originally
we were doing that but commit f3b59291 removed the logic with a
flawed argument that it is not needed.

The problem is that although for delayed allocated blocks we write their
contents immediately after allocating them, there is no guarantee that
the IO scheduler or device doesn't reorder things and thus transaction
allocating blocks and attaching them to inode can reach stable storage
before actual block contents. Actually whenever we attach freshly
allocated blocks to inode using a written extent, we should add inode to
transaction's ordered inode list to make sure we properly wait for block
contents to be written before committing the transaction. So that is
what we do in this patch. This also handles other cases where stale data
exposure was possible - like filling hole via mmap in
data=ordered,nodelalloc mode.

The only exception to the above rule are extending direct IO writes where
blkdev_direct_IO() waits for IO to complete before increasing i_size and
thus stale data exposure is not possible. For now we don't complicate
the code with optimizing this special case since the overhead is pretty
low. In case this is observed to be a performance problem we can always
handle it using a special flag to ext4_map_blocks().

Fixes: f3b59291Reported-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com>
Tested-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9f6151c9 upstream.

Pass the current crtc state, not the old crtc state, to the
.update_plane() hook.

Noticed on BSW when PRIMSIZE was getting programmed to a stale value
which produced utter garbage on screen eg. wwhen going from 1920x1080
to 1024x768.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: a758e684 ("drm/i915: Do not use commit_plane for sprite planes.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 310944d1 upstream.

The component master driver imx-drm-core matches component devices using
their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc
module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during
probing. Before that, of_node was set and caused an of: modalias to be
used instead of the platform: modalias, which broke module autoloading.

On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc
probe function calls component_add, component matching in imx-drm-core
fails. While dev->of_node will be set once the next component tries to
bring up the component master, imx-drm-core component binding will never
succeed if one of the crtc devices is probed last.

Add of_node to the component platform data and match against the
pdata->of_node instead of dev->of_node in imx-drm-core to work around
this problem.

Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b3daa5ef upstream.

Add a helper which aids in the identification of DP dual mode
(aka. DP++) adaptors. There are several types of adaptors
specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI

Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors
may go as high as 300MHz and they provide a register informing the
source device what the actual limit is. Supposedly also type 1 adaptors
may optionally implement this register. This TMDS clock limit is the
main reason why we need to identify these adaptors.

Type 1 adaptors provide access to their internal registers and the sink
DDC bus through I2C. Type 2 adaptors provide this access both via I2C
and I2C-over-AUX. A type 2 source device may choose to implement either
of these methods. If a source device implements the I2C-over-AUX
method, then the driver will obviously need specific support for such
adaptors since the port is driven like an HDMI port, but DDC
communication happes over the AUX channel.

This helper should be enough to identify the adaptor type (some
type 1 DVI adaptors may be a slight exception) and the maximum TMDS
clock limit. Another feature that may be available is control over
the TMDS output buffers on the adaptor, possibly allowing for some
power saving when the TMDS link is down.

Other user controllable features that may be available in the adaptors
are downstream i2c bus speed control when using i2c-over-aux, and
some control over the CEC pin. I chose not to provide any helper
functions for those since I have no use for them in i915 at this time.
The rest of the registers in the adaptor are mostly just information,
eg. IEEE OUI, hardware and firmware revision, etc.

v2: Pass adaptor type to helper functions to ease driver implementation
    Fix a bunch of typoes (Paulo)
    Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know
    the type (Paulo)
    Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo)
    Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to
    ease future LSPCON enabling
    Remove the unused DP_DUAL_MODE_LAST_RESERVED define
v3: Fix kernel doc function argument descriptions (Jani)
    s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs
    Add kernel doc for enum drm_dp_dual_mode_type
    Actually build the docs
    Fix more typoes
v4: Adjust code indentation of type2 adaptor detection (Shashank)
    Add debug messages for failurs cases (Shashank)
v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo)

Cc: Tore Anderson <tore@fud.no>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit ede53344)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit caed361d upstream.

commit 92826fcd ("drm/i915: Calculate watermark related members in the crtc_state, v4.")
broke thigns by removing the pre vs. post wm update distinction. We also
lost the pre plane wm update entirely for VLV/CHV from the crtc enable
path.

This caused underruns on modeset and plane enable/disable on CHV,
and often those can lead to a dead pipe.

So let's bring back the pre vs. post thing, and let's toss in an
explicit wm update to valleyview_crtc_enable() to avoid having to
put it into the common code.

This is more or less a partial revert of the offending commit.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 92826fcd ("drm/i915: Calculate watermark related members in the crtc_state, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7045c368 upstream.

When we read out the watermark state from the hardware we're supposed to
transfer that into the active watermarks, but currently we fail to any
part of the active watermarks that isn't explicitly written. Let's clear
it all upfront.

Looks like this has been like this since the beginning, when I added the
readout. No idea why I didn't clear it up.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 243e6a44 ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463151318-14719-2-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 15606534)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0c2fb7c6 upstream.

To save a bit of power, let's try to turn off the TMDS output buffers
in DP++ adaptors when we're not driving the port.

v2: Let's not forget DDI, toss in a debug message while at it
v3: Just do the TMDS output control based on adaptor type. With the
    helper getting passed the type, we wouldn't actually have to
    check at all in the driver, but the check eliminates the debug
    output more honest

Cc: Tore Anderson <tore@fud.no>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Shashank Sharma <shashank.sharma@intel.com>
(cherry picked from commit b2ccb822)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c578d152 upstream.

Try to detect the max TMDS clock limit for the DP++ adaptor (if any)
and take it into account when checking the port clock.

Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore
the adaptor TMDS clock limit in the modeset path, in case users are
already "overclocking" their TMDS links. One subtle change here is that
we'll have to respect the adaptor TMDS clock limit when we decide whether
to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and
accidentally driving the TMDS link out of spec even when the user chose
a mode that fits wihting the limits at 8bpc. This means you can't
"overclock" your DP++ dongle at 12bpc anymore, but you can continue to
do so at 8bpc.

Note that for simplicity we'll use the I2C access method for all dual
mode adaptors including type 2. Otherwise we'd have to start mixing
DP AUX and HDMI together. In the future we may need to do that if we
come across any board designs that don't hook up the DDC pins to the
DP++ connectors. Such boards would obviously only work with type 2
dual mode adaptors, and not type 1.

v2: Store adaptor type under indel_hdmi->dp_dual_mode
    Deal with DRM_DP_DUAL_MODE_UNKNOWN
    Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(),
    and use it for type1 adaptors as well
Reported-by: Tore Anderson <tore@fud.no>
Fixes: 7a0baa62 ("Revert "drm/i915: Disable 12bpc hdmi for now"")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Shashank Sharma <shashank.sharma@intel.com>
(cherry picked from commit b1ba124d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 03b7b5f9 upstream.

The default of 0 is 500us of link training, but that's not enough for
some platforms. Decoding this correctly means we're using 2.5ms of
link training on these platforms, which fixes flickering issues
associated with enabling PSR.

v2: Unbotch the math a bit.

v3: Drop debug hunk.

v4: Improve commit message.
Tested-by: Lyude <cpaul@redhat.com>
Cc: Lyude <cpaul@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: fritsch@kodi.tv
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463590036-17824-2-git-send-email-daniel.vetter@ffwll.ch
(cherry picked from commit 50db1390)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 55441070 upstream.

The memcpy of ipv6 header destination address to the skb control block
(sbk->cb) in header_create() results in currupted memory when bt_xmit()
is issued. The skb->cb is "released" in the return of header_create()
making room for lower layer to minipulate the skb->cb.

The value retrieved in bt_xmit is not persistent across header creation
and sending, and the lower layer will overwrite portions of skb->cb,
making the copied destination address wrong.

The memory corruption will lead to non-working multicast as the first 4
bytes of the copied destination address is replaced by a value that
resolves into a non-multicast prefix.

This fix removes the dependency on the skb control block between header
creation and send, by moving the destination address memcpy to the send
function path (setup_create, which is called from bt_xmit).
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unfortunately since we don't have Dave's connector refcounting patch
here yet, it's very possible that drm_atomic_state_default_clear() could
get called by intel_display_resume() when
intel_dp_mst_destroy_connector() isn't completely finished destroying an
mst connector, but has already finished setting connector->funcs to
NULL. As such, we need to treat the connector like it's already been
destroyed and just skip it, otherwise we'll end up dereferencing a NULL
pointer.

This fix is only required for 4.6 and below. David Airlie's patchseries
for 4.7 to add connector reference counting provides a more proper fix
for this.

Changes since v1:
 - Fix leftover whitespace

Upstream fix: 0552f765 ("drm/i915/mst: use reference counted
connectors. (v3)")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If an MST device is disconnected while the machine is suspended, the
number of connectors will change as well after we call
intel_dp_mst_resume(). This means that any previous atomic state we had
before suspending is no longer valid, since it'll still be pointing to
missing connectors. We need to check for this before committing the
state, otherwise we'll kernel panic on resume whenever if any MST
display was disconnected before we started resuming:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffffa01588ef>] drm_atomic_helper_check_modeset+0x29f/0xb40 [drm_kms_helper]
Call Trace:
 [<ffffffffa02354f4>] intel_atomic_check+0x34/0x1180 [i915]
 [<ffffffff810e6c3f>] ? mark_held_locks+0x6f/0xa0
 [<ffffffff810e6d99>] ? trace_hardirqs_on_caller+0x129/0x1b0
 [<ffffffffa00ff1d2>] drm_atomic_check_only+0x192/0x620 [drm]
 [<ffffffff813ee001>] ? pci_pm_thaw+0x21/0x90
 [<ffffffffa00ff677>] drm_atomic_commit+0x17/0x60 [drm]
 [<ffffffffa023e0ad>] intel_display_resume+0xbd/0x160 [i915]
 [<ffffffff813ee070>] ? pci_pm_thaw+0x90/0x90
 [<ffffffffa01b60d8>] i915_drm_resume+0xd8/0x160 [i915]
 [<ffffffffa01b6185>] i915_pm_resume+0x25/0x30 [i915]
 [<ffffffff813ee0d4>] pci_pm_resume+0x64/0xa0
 [<ffffffff814d9ea0>] dpm_run_callback+0x90/0x190
 [<ffffffff814da455>] device_resume+0xd5/0x1f0
 [<ffffffff814da58d>] async_resume+0x1d/0x50
 [<ffffffff810b6718>] async_run_entry_fn+0x48/0x150
 [<ffffffff810acc19>] process_one_work+0x1e9/0x5c0
 [<ffffffff810acb96>] ? process_one_work+0x166/0x5c0
 [<ffffffff810ad038>] worker_thread+0x48/0x4e0
 [<ffffffff810acff0>] ? process_one_work+0x5c0/0x5c0
 [<ffffffff810b3794>] kthread+0xe4/0x100
 [<ffffffff81742672>] ret_from_fork+0x22/0x50
 [<ffffffff810b36b0>] ? kthread_create_on_node+0x200/0x200

Changes since v1:
  - Move drm_atomic_state_free() call down so we're holding the
    appropriate locks when destroying the atomic state
Changes since v2:
  - Check that state != NULL before we start accessing it's members

This fix is only required for 4.6 and below. David Airlie's patchseries
for 4.7 to add connector reference counting provides a more proper fix
for this.

Upstream fix: 0552f765 ("drm/i915/mst: use reference counted
connectors. (v3)")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 255f0e7c upstream.

During boot, MST hotplugs are generally expected (even if no physical
hotplugging occurs) and result in DRM's connector topology changing.
This means that using num_connector from the current mode configuration
can lead to the number of connectors changing under us. This can lead to
some nasty scenarios in fbcon:

- We allocate an array to the size of dev->mode_config.num_connectors.
- MST hotplug occurs, dev->mode_config.num_connectors gets incremented.
- We try to loop through each element in the array using the new value
  of dev->mode_config.num_connectors, and end up going out of bounds
  since dev->mode_config.num_connectors is now larger then the array we
  allocated.

fb_helper->connector_count however, will always remain consistent while
we do a modeset in fb_helper.

Note: This is just polish for 4.7, Dave Airlie's drm_connector
refcounting fixed these bugs for real. But it's good enough duct-tape
for stable kernel backporting, since backporting the refcounting
changes is way too invasive.
Signed-off-by: Lyude <cpaul@redhat.com>
[danvet: Clarify why we need this. Also remove the now unused "dev"
local variable to appease gcc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463065021-18280-3-git-send-email-cpaul@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 14a3842a upstream.

During boot time, MST devices usually send a ton of hotplug events
irregardless of whether or not any physical hotplugs actually occurred.
Hotplugs mean connectors being created/destroyed, and the number of DRM
connectors changing under us. This isn't a problem if we use
fb_helper->connector_count since we only set it once in the code,
however if we use num_connector from struct drm_mode_config we risk it's
value changing under us. On top of that, there's even a chance that
dev->mode_config.num_connector != fb_helper->connector_count. If the
number of connectors happens to increase under us, we'll end up using
the wrong array size for memcpy and start writing beyond the actual
length of the array, occasionally resulting in kernel panics.

Note: This is just polish for 4.7, Dave Airlie's drm_connector
refcounting fixed these bugs for real. But it's good enough duct-tape
for stable kernel backporting, since backporting the refcounting
changes is way too invasive.
Signed-off-by: Lyude <cpaul@redhat.com>
[danvet: Clarify why we need this.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463065021-18280-2-git-send-email-cpaul@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9d746ab6 upstream.

When porting the hdmi deep color detection code from
radeon-kms to amdgpu-kms apparently some kind of
copy and paste error happened, attaching an else
branch to the wrong if statement.

The result is that hdmi deep color mode is always
disabled, regardless of gpu and display capabilities and
user wishes, as the code mistakenly thinks that the display
doesn't provide the required max_tmds_clock limit and falls
back to 8 bpc.

This patch fixes deep color support, as tested on a
R9 380 Tonga Pro + suitable display, and should be
backported to all kernels with amdgpu-kms support.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6b8812eb upstream.

This is a port of radeon commit:
3d2d98ee
drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh
to amdgpu.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>