- 24 Nov, 2019 20 commits
-
-
Huazhong Tan authored
[ Upstream commit e4fd7502 ] The user's coal configuration will be lost after reset, so the tx_coal and rx_coal fields are added to the struct hns_nic_priv to save the coal configuration and used to restore the user's configuration after the reset is complete. Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yunsheng Lin authored
[ Upstream commit 93d8daf4 ] Currently hns3_nic_change_mtu will try to down the netdev before setting mtu, and it does not up the netdev when the setting fails, which causes netdev not up problem. This patch fixes it by not returning when the setting fails. Fixes: a8e8b7ff ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 656c1a65 ] Since SMPS10 and OTG cable detection extcon are described here, and work to enable OTG power when an OTG cable is plugged in, we can define OTG mode in the controller (which is disabled by default in omap5.dtsi). Tested on OMAP5EVM and Pyra. Suggested-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Vignesh R authored
[ Upstream commit b830526f ] Add ti,syscon-unaligned-access property to PCIe RC nodes to set appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for errata i870. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit a9ca7f17 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit eddf11e1 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
Wang YanQing authored
commit 711aef1b upstream. The current method to compare 64-bit numbers for conditional jump is: 1) Compare the high 32-bit first. 2) If the high 32-bit isn't the same, then goto step 4. 3) Compare the low 32-bit. 4) Check the desired condition. This method is right for unsigned comparison, but it is buggy for signed comparison, because it does signed comparison for low 32-bit too. There is only one sign bit in 64-bit number, that is the MSB in the 64-bit number, it is wrong to treat low 32-bit as signed number and do the signed comparison for it. This patch fixes the bug and adds a testcase in selftests/bpf for such bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205469Reported-by:
Tony Ambardar <itugrok@yahoo.com> Cc: Tony Ambardar <itugrok@yahoo.com> Cc: stable@vger.kernel.org #v4.19 Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luke Nelson authored
commit 6fa632e7 upstream. The current x32 BPF JIT does not correctly compile shift operations when the immediate shift amount is 0. The expected behavior is for this to be a no-op. The following program demonstrates the bug. The expexceted result is 1, but the current JITed code returns 2. r0 = 1 r1 = 1 r1 <<= 0 if r1 == 1 goto end r0 = 2 end: exit This patch simplifies the code and fixes the bug. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Co-developed-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
-
Luke Nelson authored
commit 68a8357e upstream. The current x32 BPF JIT for shift operations is not correct when the shift amount in a register is 0. The expected behavior is a no-op, whereas the current implementation changes bits in the destination register. The following example demonstrates the bug. The expected result of this program is 1, but the current JITed code returns 2. r0 = 1 r1 = 1 r2 = 0 r1 <<= r2 if r1 == 1 goto end r0 = 2 end: exit The bug is caused by an incorrect assumption by the JIT that a shift by 32 clear the register. On x32 however, shifts use the lower 5 bits of the source, making a shift by 32 equivalent to a shift by 0. This patch fixes the bug using double-precision shifts, which also simplifies the code. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Co-developed-by:
-
Wang YanQing authored
commit b9aa0b35 upstream. The current implementation has two errors: 1: The second xor instruction will clear carry flag which is necessary for following sbb instruction. 2: The select coding for sbb instruction is wrong, the coding is "sbb dreg_hi,ecx", but what we need is "sbb ecx,dreg_hi". This patch rewrites the implementation and fixes the errors. This patch fixes below errors reported by bpf/test_verifier in x32 platform when the jit is enabled: " 0: (b4) w1 = 4 1: (b4) w2 = 4 2: (1f) r2 -= r1 3: (4f) r2 |= r1 4: (87) r2 = -r2 5: (c7) r2 s>>= 63 6: (5f) r1 &= r2 7: (bf) r0 = r1 8: (95) exit processed 9 insns (limit 131072), stack depth 0 0: (b4) w1 = 4 1: (b4) w2 = 4 2: (1f) r2 -= r1 3: (4f) r2 |= r1 4: (87) r2 = -r2 5: (c7) r2 s>>= 63 6: (5f) r1 &= r2 7: (bf) r0 = r1 8: (95) exit processed 9 insns (limit 131072), stack depth 0 ...... Summary: 1189 PASSED, 125 SKIPPED, 15 FAILED " Signed-off-by:
-
Daniel Vetter authored
commit 3b8720e6 upstream. It's dead code ever since commit 34280340 Author: Geert Uytterhoeven <geert+renesas@glider.be> Date: Fri Dec 4 17:01:43 2015 +0100 fbdev: Remove unused SH-Mobile HDMI driver Also with this gone we can remove the cea_modes db. This entire thing is massively incomplete anyway, compared to the CEA parsing that drm_edid.c does. Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Tavis Ormandy <taviso@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190721201956.941-1-daniel.vetter@ffwll.chSigned-off-by:
-
Pavel Tatashin authored
commit 94bb804e upstream. A number of our uaccess routines ('__arch_clear_user()' and '__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they encounter an unhandled fault whilst accessing userspace. For CPUs implementing both hardware PAN and UAO, this bug has no effect when both extensions are in use by the kernel. For CPUs implementing hardware PAN but not UAO, this means that a kernel using hardware PAN may execute portions of code with PAN inadvertently disabled, opening us up to potential security vulnerabilities that rely on userspace access from within the kernel which would usually be prevented by this mechanism. In other words, parts of the kernel run the same way as they would on a CPU without PAN implemented/emulated at all. For CPUs not implementing hardware PAN and instead relying on software emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately much worse. Calling 'schedule()' with software PAN disabled means that the next task will execute in the kernel using the page-table and ASID of the previous process even after 'switch_mm()', since the actual hardware switch is deferred until return to userspace. At this point, or if there is a intermediate call to 'uaccess_enable()', the page-table and ASID of the new process are installed. Sadly, due to the changes introduced by KPTI, this is not an atomic operation and there is a very small window (two instructions) where the CPU is configured with the page-table of the old task and the ASID of the new task; a speculative access in this state is disastrous because it would corrupt the TLB entries for the new task with mappings from the previous address space. As Pavel explains: | I was able to reproduce memory corruption problem on Broadcom's SoC | ARMv8-A like this: | | Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's | stack is accessed and copied. | | The test program performed the following on every CPU and forking | many processes: | | unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE, | MAP_SHARED | MAP_ANONYMOUS, -1, 0); | map[0] = getpid(); | sched_yield(); | if (map[0] != getpid()) { | fprintf(stderr, "Corruption detected!"); | } | munmap(map, PAGE_SIZE); | | From time to time I was getting map[0] to contain pid for a | different process. Ensure that PAN is re-enabled when returning after an unhandled user fault from our uaccess routines. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Pavel Tatashin <pasha.tatashin@soleen.com> [will: rewrote commit message] Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
David Hildenbrand authored
commit 656d5711 upstream. We recently started updating the node span based on the zone span to avoid touching uninitialized memmaps. Currently, we will always detect the node span to start at 0, meaning a node can easily span too many pages. pgdat_is_empty() will still work correctly if all zones span no pages. We should skip over all zones without spanned pages and properly handle the first detected zone that spans pages. Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node span cannot easily be inspected and tested. The node span gives no real guarantees when an architecture supports memory hotplug, meaning it can easily contain holes or span pages of different nodes. The node span is not really used after init on architectures that support memory hotplug. E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in mm/kmemleak.c:kmemleak_scan(). These users seem to be fine. Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com Fixes: 00d6c019 ("mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()") Signed-off-by:
David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Hildenbrand authored
commit 00d6c019 upstream. We might use the nid of memmaps that were never initialized. For example, if the memmap was poisoned, we will crash the kernel in pfn_to_nid() right now. Let's use the calculated boundaries of the separate zones instead. This now also avoids having to iterate over a whole bunch of subsections again, after shrinking one zone. Before commit d0dc12e8 ("mm/memory_hotplug: optimize memory hotplug"), the memmap was initialized to 0 and the node was set to the right value. After that commit, the node might be garbage. We'll have to fix shrink_zone_span() next. Link: http://lkml.kernel.org/r/20191006085646.5768-4-david@redhat.com Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [d0dc12e8] Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Damian Tometzki <damian.tometzki@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by:
-
Matthew Wilcox (Oracle) authored
commit 5c089fd0 upstream. If the entry is deleted from the IDR between the call to radix_tree_iter_find() and rcu_dereference_raw(), idr_get_next() will return NULL, which will end the iteration prematurely. We should instead continue to the next entry in the IDR. This only happens if the iteration is protected by the RCU lock. Most IDR users use a spinlock or semaphore to exclude simultaneous modifications. It was noticed once the PID allocator was converted to use the IDR, as it uses the RCU lock, but there may be other users elsewhere in the kernel. We can't use the normal pattern of calling radix_tree_deref_retry() (which catches both a retry entry in a leaf node and a node entry in the root) as the IDR supports storing entries which are unaligned, which will trigger an infinite loop if they are encountered. Instead, we have to explicitly check whether the entry is a retry entry. Fixes: 0a835c4f ("Reimplement IDR and IDA using the radix tree") Reported-by:
Brendan Gregg <bgregg@netflix.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Dan Carpenter authored
commit a56dcc6b upstream. This code is supposed to test for negative error codes and partial reads, but because sizeof() is size_t (unsigned) type then negative error codes are type promoted to high positive values and the condition doesn't work as expected. Fixes: 332f989a ("CDC-NCM: handle incomplete transfer of MTU") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 4c64ce94 which is commit 3d255699 upstream. Turns out to break the build on the odroid machines, so it needs to be reverted. Reported-by:
Viresh Kumar <viresh.kumar@linaro.org> Reported-by:
"kernelci.org bot" <bot@kernelci.org> Cc: Niklas Cassel <niklas.cassel@linaro.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Julia Lawall authored
commit c7c0d8df upstream. Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: db878f76 ("tee: optee: take DT status property into account") Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Hsin-Yi Wang authored
commit bc1a7f75 upstream. DMA with zero-length transfers doesn't make sense and this HW doesn't support them at all, so increase the threshold. Fixes: fc66b39f ("i2c: mediatek: Use DMA safe buffers for i2c transactions") Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> [wsa: reworded commit message] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Leilk Liu authored
commit a4d8f64f upstream. when xfer_len is greater than 64 bytes and use fifo mode to transfer, the actual length from the third time is mata->xfer_len but not len in mtk_spi_interrupt(). Signed-off-by:
Leilk Liu <leilk.liu@mediatek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 20 Nov, 2019 20 commits
-
-
Greg Kroah-Hartman authored
-
Jouni Hogander authored
commit ed50e160 upstream. This patch is fixing memory leak reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xffffffffffffffff Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
zhong jiang authored
The commit 99b45e7a ("memfd: Fix locking when tagging pins") introduces the following warning messages. *WARNING: suspicious RCU usage in memfd_wait_for_pins* It is because we still use radix_tree_deref_slot without read_rcu_lock. We should use radix_tree_deref_slot_protected instead in the case. Cc: stable@vger.kernel.org Fixes: 99b45e7a ("memfd: Fix locking when tagging pins") Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Reviewed-by:
-
Arnd Bergmann authored
[ Upstream commit 9b97123a ] The newly added runtime-pm support causes a harmless warning when CONFIG_PM is disabled: drivers/net/phy/mdio-bcm-unimac.c:330:12: error: 'unimac_mdio_resume' defined but not used [-Werror=unused-function] static int unimac_mdio_resume(struct device *d) drivers/net/phy/mdio-bcm-unimac.c:321:12: error: 'unimac_mdio_suspend' defined but not used [-Werror=unused-function] static int unimac_mdio_suspend(struct device *d) Marking the functions as __maybe_unused is the easiest workaround and avoids adding #ifdef checks. Fixes: b78ac6ec ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 190f056f ] While "s390/vdso: avoid 64-bit vdso mapping for compat tasks" fixed 64-bit vdso mapping for compat tasks under gdb it introduced another problem. "compat_mm" flag is not inherited during fork and when 31-bit process forks a child (but does not perform exec) it ends up with 64-bit vdso. To address that, init_new_context (which is called during fork and exec) now initialize compat_mm based on thread TIF_31BIT flag. Later compat_mm is adjusted in arch_setup_additional_pages, which is called during exec. Fixes: d1befa65 ("s390/vdso: avoid 64-bit vdso mapping for compat tasks") Reported-by:
Stefan Liebler <stli@linux.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Rui Miguel Silva authored
[ Upstream commit c45fbdf2 ] Swapping the order between v4l2 subdevice registration and checking chip id in b7a41762 ("media: ov2680: don't register the v4l2 subdevice before checking chip ID") makes the mode restore to use the sensor controls before they are set, so move the mode restore call to s_power after the handler setup for controls is done. This remove also the need for the error code path in power on function. Fixes: b7a41762 ("media: ov2680: don't register the v4l2 subdevice before checking chip ID") Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Israel Rukshin authored
[ Upstream commit 65f07f5a ] In case target remote invalidates bogus rkey and signature is not used, pi_ctx is NULL deref. The commit also fails the connection on bogus remote invalidation. Fixes: 59caaed7 ("IB/iser: Support the remote invalidation exception") Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Kirill Tkhai authored
[ Upstream commit 2a23f2b8 ] Since they are of unsigned int type, it's allowed to read them unlocked during reporting to userspace. Let's underline this fact with READ_ONCE() macroses. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Guido Kiener authored
[ Upstream commit 9a831903 ] Fix uninitialized symbol 'actual' in function usbtmc_ioctl_clear. When symbol 'actual' is not initialized and usb_bulk_msg() fails, the subsequent kernel debug message shows a random value. Signed-off-by:
Guido Kiener <guido.kiener@rohde-schwarz.com> Fixes: dfee02ac ("usb: usbtmc: Fix ioctl USBTMC_IOCTL_CLEAR") Signed-off-by:
-
Chunfeng Yun authored
[ Upstream commit 87173acc ] If the interval equal zero, needn't round up to power of two for the number of packets in each ESIT, so fix it. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Tan Hu authored
[ Upstream commit 097f95d3 ] We configured iptables as below, which only allowed incoming data on established connections: iptables -t mangle -A PREROUTING -m state --state ESTABLISHED -j ACCEPT iptables -t mangle -P PREROUTING DROP When deleting a secondary address, current masquerade implements would flush all conntracks on this device. All the established connections on primary address also be deleted, then subsequent incoming data on the connections would be dropped wrongly because it was identified as NEW connection. So when an address was delete, it should only flush connections related with the address. Signed-off-by:
Tan Hu <tan.hu@zte.com.cn> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 7d61cbb9 ] The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler. This may lead to a NULL pointer dereference. Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 2ab78755 ] The default word_size and stride of 1 are correct for the tx4939. Also fix the nvmem folder name. Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 1b4c794f ] Use rtc_add_group to add the common sysfs group to avoid a possible race condition. [Denis.Osterland@diehl.com: use to_i2c_client(dev->parent)] Signed-off-by:
Denis Osterland <Denis.Osterland@diehl.com> Signed-off-by:
-
Rob Herring authored
[ Upstream commit 11236ef5 ] SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rob Herring authored
[ Upstream commit 09bae3b6 ] SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Cc: Chanho Min <chanho.min@lge.com> Signed-off-by:
-
Rob Herring authored
[ Upstream commit e9f0878c ] dtc has new checks for SPI buses. Fix the warnings in node names. arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi' Cc: Brijesh Singh <brijeshkumar.singh@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 6b0e87a6 ] The SR_RST bit isn't latched. Hence, detecting a bus reset isn't reliable. When it is detected, the right thing to do is to drop all connected and disconnected commands. The code for that is already present so refactor it and call it when SR_RST is set. Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit ca694afa ] The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out procedure", that a target may assert RST or go to BUS FREE phase if the initiator does not respond within 200 us. Something like this has been observed with AztecMonster II target. When it happens, all we can do is wait for the target to try again. Tested-by:
-
Finn Thain authored
[ Upstream commit 08267216 ] The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", ... The reselected initiator shall then assert the BSY signal within a selection abort time of its most recent detection of being reselected; this is required for correct operation of the time-out procedure. The selection abort time is only 200 us which may be insufficient time for a printk() call. Move the diagnostics to the error paths. Tested-by:
-
