+ minor cleanups
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

avoid obsolete APIs
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Avoid old APIs and fix a bad bug were the irq handler argument was
derefenced as struct Scsi_Host * instead of Adpater * which made the
driver instantly crash on SMP.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

replace obsolete typedefs and scsi_to_pci_dma_dir, use proper includes
and re-order includes correctly.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: Joel Soete <soete.joel@tiscali.be>

This patch makes the ncr driver capable of accepting segments which
are larger than the block size.  It has been tested against IOMMU
merging on parisc.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: Matthew Wilcox <willy@debian.org>

- remove all of the PCI chips (8xx series) leaving only 720
- pull out stand alone initialisation code (driver becomes a chip only
  driver for NCR Q720 and Zalon)
- remove most vestiges of PCI support (chip driver should be bus neutral)
- tidy up typedefs
- remove simulated intfly (may need putting back for 770)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

the patch below finishes off the removal of the obsolete hosts.h usage, and
now that the users are gone, it's safe to turn on the warning to
prevent accidental future use... Please apply
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Some SCSI-IDE cdrom drives take up to 15 seconds to respond following
an abort being issued to them. This patch changes ipr to only send
a cancel all to a device as part of request sense processing when
the device is running tagged command queueing.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The following patch fixes a hang that occurs when an abort
is issued by the midlayer. The hang is the result of overriding
a field in the union of the ipr_cmd struct. It is fixed by moving
this pointer outside of the union, since it is not mutually exclusive
with the other fields in the union.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

into mulgrave.(none):/home/jejb/BK/scsi-misc-2.6

The BLIST_REPORTLUN2 blacklist item has exactly the behavior that
the MYLEX DACARMRB (and SGI TP9100, which is really a 2Gb upgrade
to the DACARMRB) need.

These devices use a PQ of 1 instead of 3 for unconfigured luns,
which means that every RAID has 32 luns, many or most of which
are just phantoms.

However, it does support Report Luns, and it returns the correct
data.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The object of this infrastructure is to give HBAs early warning that
error handling is about to happen and also provide them with the
opportunity to do something about it.

It introduces the extra template callback:

eh_timed_out()

which scsi_times_out() will call if it is populated to notify the LLD
that an outstanding command took a timeout.

There are three possible returns:

EH_HANDLED:	I've fixed the problem, please complete the command for me
(as soon as the timer fires, scsi_done will do nothing, so the timer
itself will call a special version of scsi_done that doesn't check the
timer).

EH_NOT_HANDLED:	Invoke error recovery as normal

EH_RESET_TIMER:	The command will complete, reset the timer to its
original value and start it ticking again.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Based on work by Christoph Hellwig and Luben Tuikov

I've been going through Mark's changes with a fine toothcomb and this merges
most of them. Its tested on 64bit SMP hardware and seems to be fine. There
are a couple of Mark's changes I've left out for now but there isnt really
an easy way to break down the changes further.

This fixes a whole host of problems including random hangs under high load
Signed-off-by: Alan Cox <alan@redhat.com>
        
Original contribution under GPL from Adaptec, updates checking by Red Hat
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This is a fix for when we encounter an alias during insert. When that
happens we move the request to dispatch, but it may happen that this
request is also the ->last_merge hint. So we may attempt to merge with
this later, when it's either in progress or already freed. Rearrange the
logic a bit so we clear the merge hint there as well. It looks more
complex than it is, the only real code change is the addition of a
cfq_remove_merge_hints() in cfq_dispatch_sort().
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It's possible under unlucky circumstances for this race to trigger. I
described it with a comment in the code.
Signed-Off-By: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This makes the CFQ tunables available in sysfs, like AS and deadline.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Noted by Alexey Dobriyan.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This cset adds the code to handle the hardware vector floating point
unit found on some ARM926 and later CPUs.  The hardware provides
an implementation for the common cases, and bounces exceptions for
other cases, which have to be handled in software, and signalling
SIGFPE as appropriate.

Remove unused queued_signals global accounting.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a user_struct pointer to the sigqueue structure.  Charge sigqueue
allocation and destruction to the user_struct rather than a global pool.  This
per user rlimit accounting obsoletes the global queued_signals accouting.

The patch as charges the sigqueue struct allocation to the queue that it's
pending on (the receiver of the signal).  So the owner of the queue is charged
for whoever writes to it (much like quota for a 777 file).

The patch started out charging the task which allocated the sigqueue struct.
In most cases, these are always the same user (permission for sending a
signal), so those cases are moot.  In the cases where it isn't the same user,
it's a privileged user sending a signal to another user.

It seems wrong to charge the allocation to the privleged user, when the other
user could block receipt as long as it feels.  The flipside is, someone else
can fill your queue (expectation is that someone else is privileged).  I think
it's right the way it is.  The change to revert is very small.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Update send_signal() api to allow passing the task receiving the signal.  This
is necessary to ensure signals generated out of process context can be charged
to the correct user.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The cmpci driver included in Linux 2.6.7 causes an oops on rmmod, I believe
cm_remove should be marked __devexit rather than __devinit.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- optimize byteswap
- add noswap io mode
- cleanup var type
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- Kconfig typo fix
- PTRACE_PEEKUSER read process info support
- exr restore fix
- ptrace register offset fix
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Several scheduler macros only read from the task struct, mark them const.
It may help the compiler generate better code.
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Distros have started to ship kernels with this patch, as it seems that some
unnamed binary module authors are already abusing this function (as well as
some open source modules, like the openib code.) I could not find any valid
reason why this symbol should be exported, so here's a patch against 2.6.7
that removes it.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Delete a blank line for more error reporting on-screen.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Hit a bug check when unmap a hugetlb vma in PAE mode on i386 (and x86-64).

 Bad page state at free_hot_cold_page (in process 'a.out', page c165cc40)
 flags:0x20000000 mapping:f75e1d00 mapped:0 count:0
 Backtrace:
 Call Trace:
  [<c0133e0d>] bad_page+0x79/0x9e
  [<c0134550>] free_hot_cold_page+0x71/0xfa
  [<c0115d60>] unmap_hugepage_range+0xa3/0xbf
  [<c013d375>] unmap_vmas+0xac/0x252
  [<c0117691>] default_wake_function+0x0/0xc
  [<c0140bea>] unmap_region+0xd8/0x145
  [<c0140f2d>] do_munmap+0xfc/0x14d
  [<c01b8a56>] sys_shmdt+0xa5/0x126
  [<c010a2ad>] sys_ipc+0x23c/0x27f
  [<c014a85e>] sys_write+0x38/0x59
  [<c0103e1b>] syscall_call+0x7/0xb

It turns out there is a bug in hugetlb_prefault(): with 3 level page table,
huge_pte_alloc() might return a pmd that points to a PTE page.  It happens
if the virtual address for hugetlb mmap is recycled from previously used
normal page mmap.  free_pgtables() might not scrub the pmd entry on munmap
and hugetlb_prefault skips on any pmd presence regardless what type it is. 
Patch to fix the bug.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>