Skip to content

L
linux
Switch branch/tag
  1. 12 Jan, 2014 6 commits
    • Gerhard Sittig's avatar
      clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCK · 7d71d5b2
      Gerhard Sittig authored 
      the setup before the change was
- arch/powerpc/Kconfig had the PPC_CLOCK option, off by default
- depending on the PPC_CLOCK option the arch/powerpc/kernel/clock.c file
  was built, which implements the clk.h API but always returns -ENOSYS
  unless a platform registers specific callbacks
- the MPC52xx platform selected PPC_CLOCK but did not register any
  callbacks, thus all clk.h API calls keep resulting in -ENOSYS errors
  (which is OK, all peripheral drivers deal with the situation)
- the MPC512x platform selected PPC_CLOCK and registered specific
  callbacks implemented in arch/powerpc/platforms/512x/clock.c, thus
  provided real support for the clock API
- no other powerpc platform did select PPC_CLOCK

the situation after the change is
- the MPC512x platform implements the COMMON_CLK interface, and thus the
  PPC_CLOCK approach in arch/powerpc/platforms/512x/clock.c has become
  obsolete
- the MPC52xx platform still lacks genuine support for the clk.h API
  while this is not a change against the previous situation (the error
  code returned from COMMON_CLK stubs differs but every call still
  results in an error)
- with all references gone, the arch/powerpc/kernel/clock.c wrapper and
  the PPC_CLOCK option have become obsolete, as did the clk_interface.h
  header file

the switch from PPC_CLOCK to COMMON_CLK is done for all platforms within
the same commit such that multiplatform kernels (the combination of 512x
and 52xx within one executable) keep working

Cc: Mike Turquette <mturquette@linaro.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
      7d71d5b2
    • Gerhard Sittig's avatar
      dts: mpc512x: add clock specs for client lookups · 124fe7c5
      Gerhard Sittig authored 
      this addresses the client side of device tree based clock lookups

add clock specifiers to the mbx, nfc, mscan, sdhc, i2c, axe, diu, viu,
mdio, fec, usb, pata, psc, psc fifo, and pci nodes in the shared
mpc5121.dtsi include

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: devicetree@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: default avatarMike Turquette <mturquette@linaro.org>
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
      124fe7c5
    • Gerhard Sittig's avatar
      clk: mpc512x: add backwards compat to the CCF code · 01f25c37
      Gerhard Sittig authored 
      extend the recently added COMMON_CLK platform support for MPC512x such
that it works with incomplete device tree data which lacks clock specs

Cc: Mike Turquette <mturquette@linaro.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
[agust@denx.de: moved node macro definitions out of the function body]
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
      01f25c37
    • Gerhard Sittig's avatar
      clk: mpc512x: introduce COMMON_CLK for MPC512x (disabled) · 6d8cdb68
      Gerhard Sittig authored 
      this change implements a clock driver for the MPC512x PowerPC platform
which follows the COMMON_CLK approach and uses common clock drivers
shared with other platforms

this driver implements the publicly announced set of clocks (those
listed in the dt-bindings header file), as well as generates additional
'struct clk' items where the SoC hardware cannot easily get mapped to
the common primitives (shared code) of the clock API, or requires
"intermediate clock nodes" to represent clocks that have both gates and
dividers

the previous PPC_CLOCK implementation is kept in place and remains
active for the moment, the newly introduced CCF clock driver will
receive additional support for backwards compatibility in a subsequent
patch before it gets enabled and will replace the PPC_CLOCK approach

some of the clock items get pre-enabled in the clock driver to not have
them automatically disabled by the underlying clock subsystem because of
their being unused -- this approach is desirable because
- some of the clocks are useful to have for diagnostics and information
  despite their not getting claimed by any drivers (CPU, internal and
  external RAM, internal busses, boot media)
- some of the clocks aren't claimed by their peripheral drivers yet,
  either because of missing driver support or because device tree specs
  aren't available yet (but the workarounds will get removed as the
  drivers get adjusted and the device tree provides the clock specs)

clkdev registration provides "alias names" for few clock items
- to not break those peripheral drivers which encode their component
  index into the name that is used for clock lookup (UART, SPI, USB)
- to not break those drivers which use names for the clock lookup which
  were encoded in the previous PPC_CLOCK implementation (NFC, VIU, CAN)
this workaround will get removed as these drivers get adjusted after
device tree based clock lookup has become available

the COMMON_CLK implementation copes with device trees which lack an
oscillator node (backwards compat), the REF clock is then derived from
the IPS bus frequency and multiplier values fetched from hardware

Cc: Mike Turquette <mturquette@linaro.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
      6d8cdb68
    • Gerhard Sittig's avatar
      dts: mpc512x: add clock related device tree specs · f87ccd2e
      Gerhard Sittig authored 
      this addresses the clock driver aka provider's side of clocks
- introduce a 'clocks' subtree with an 'osc' node for the crystal
  or oscillator SoC input (fixed frequency)
- the 'clock@f00' clock-control-module node references the 'osc' for
  its input, and is another provider for all the clocks which the
  CCM component manages
- prepare for future references to clocks from peripheral nodes
  by means of the <&clks ID> syntax and symbolic ID names which a
  header file provides
- provide default values with 33MHz oscillator frequency in the
  common include (the 66MHz IPS bus already was there), and add
  override values for the ifm AC14xx board which deviates from
  the reference design (25MHz xtal, 80MHz IPS bus)

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Reviewed-by: default avatarMike Turquette <mturquette@linaro.org>
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
      f87ccd2e
    • Gerhard Sittig's avatar
      dts: mpc512x: introduce dt-bindings/clock/ header · 4cc5e1ca
      Gerhard Sittig authored 
      introduce a dt-bindings/ header file for MPC512x clocks,
providing symbolic identifiers for those SoC clocks which
clients will reference from their device tree nodes

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: default avatarMike Turquette <mturquette@linaro.org>
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
      4cc5e1ca
  3. 30 Dec, 2013 15 commits
  5. 20 Dec, 2013 1 commit
  7. 18 Dec, 2013 1 commit
    • Gerhard Sittig's avatar
      powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125) · bbca4d39
      Gerhard Sittig authored 
      the 'soc' node in the MPC5125 "tower" board .dts has an '#interrupt-cells'
property although this node is not an interrupt controller

remove this erroneously placed property because starting with v3.13-rc1
lookup and resolution of 'interrupts' specs for peripherals gets misled
(tries to use the 'soc' as the interrupt parent which fails), emits
'no irq domain found' WARN() messages and breaks the boot process

[ best viewed with 'git diff -U5' to have DT node names in the context ]

Cc: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
      bbca4d39
  9. 13 Dec, 2013 10 commits
  11. 10 Dec, 2013 7 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7