- 15 Nov, 2019 12 commits
-
-
Jacob Keller authored
Fix the mv88e6xxx PTP support to explicitly reject any future flags that get added to the external timestamp request ioctl. In order to maintain currently functioning code, this patch accepts all three current flags. This is because the PTP_RISING_EDGE and PTP_FALLING_EDGE flags have unclear semantics and each driver seems to have interpreted them slightly differently. For the record, the semantics of this driver are: flags Meaning ---------------------------------------------------- -------------------------- PTP_ENABLE_FEATURE Time stamp falling edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp rising edge Cc: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Commit 823eb2a3 ("PTP: add support for one-shot output") introduced a new flag for the PTP periodic output request ioctl. This flag is not currently supported by any driver. Fix all drivers which implement the periodic output request ioctl to explicitly reject any request with flags they do not understand. This ensures that the driver does not accidentally misinterpret the PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future. This is important for forward compatibility: if a new flag is introduced, the driver should reject requests to enable the flag until the driver has actually been modified to support the flag in question. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Richard Cochran authored
Commit 41560658 ("PTP: introduce new versions of IOCTLs") introduced a new external time stamp ioctl that validates the flags. This patch extends the validation to ensure that at least one rising or falling edge flag is set when enabling external time stamps. Signed-off-by:
-
Chuhong Yuan authored
The driver calls release_resource in remove to match request_mem_region in probe, which is incorrect. Fix it by using the right one, release_mem_region. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Oliver Neukum authored
If a malicious device gives a short MAC it can elicit up to 5 bytes of leaked memory out of the driver. We need to check for ETH_ALEN instead. Reported-by: syzbot+a8d4acdad35e6bbca308@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Ido Schimmel authored
mlxsw does not support VXLAN devices with a physical device attached and vetoes such configurations upon enslavement to an offloaded bridge. Commit 0ce1822c ("vxlan: add adjacent link to limit depth level") changed the VXLAN device to be an upper of the physical device which causes mlxsw to veto the creation of the VXLAN device with "Unknown upper device type". This is OK as this configuration is not supported, but it prevents us from testing bad flows involving the enslavement of VXLAN devices with a physical device to a bridge, regardless if the physical device is an mlxsw netdev or not. Adjust the test to use a dummy device as a physical device instead of a mlxsw netdev. Fixes: 0ce1822c ("vxlan: add adjacent link to limit depth level") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net This series includes misc fixes for the HNS3 ethernet driver. [patch 1/3] adds a compatible handling for configuration of MAC VLAN swithch parameter. [patch 2/3] re-allocates SSU buffer when pfc_en changed. [patch 3/3] fixes a bug for ETS bandwidth validation. ==================== Signed-off-by: -
Yonglong Liu authored
Some device only support 4 TCs, but the driver check the total bandwidth of 8 TCs, so may cause wrong configurations write to the hw. This patch uses hdev->tc_max to instead HNAE3_MAX_TC to fix it. Fixes: e432abfb ("net: hns3: add common validation in hclge_dcb") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
When a TC's PFC is disabled or enabled, the RX private buffer for this TC need to be changed too, otherwise this may cause packet dropped problem. This patch fixes it by calling hclge_buffer_alloc to reallocate buffer when pfc_en changes. Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Guangbin Huang authored
Previously, hns3 driver just directly send specific setting bit and mask bits of MAC VLAN switch parameter to the firmware, it can not be compatible with the old firmware, because the old one ignores mask bits and covers all bits with new setting bits. So when running with old firmware, the communication between PF and VF will fail after resetting or configuring spoof check, since they will do the MAC VLAN switch parameter configuration. This patch fixes this problem by reading switch parameter firstly, then just modifies the corresponding bit and sends it to firmware. Fixes: dd2956ea ("net: hns3: not allow SSU loopback while execute ethtool -t dev") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Ulrich Hecht authored
Pre-allocates buffers sufficient for the maximum supported MTU (2026) in order to eliminate the possibility of resource exhaustion when changing the MTU while the device is up. Signed-off-by:
Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Matt Bennett authored
The tipc prefix for log messages generated by tipc was removed in commit 07f6c4bc ("tipc: convert tipc reference table to use generic rhashtable"). This is still a useful prefix so add it back. Signed-off-by:
Matt Bennett <matt.bennett@alliedtelesis.co.nz> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
- 14 Nov, 2019 3 commits
-
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.4-20191114' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-14 here another pull request for net/master consisting of one patch (including my S-o-b). Jouni Hogander's patch fixes a memory leak found by the syzbot in the slcan driver's error path. ==================== Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-2019-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.4 Hopefully last fixes for v5.4, only one iwlwifi fix this time. iwlwifi * fix A-MSDU data corruption when using CCMP/GCMP ciphers ==================== Signed-off-by:
-
Jouni Hogander authored
This patch is fixing memory leak reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xffffffffffffffff Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- 13 Nov, 2019 15 commits
-
-
Dan Carpenter authored
This code is supposed to test for negative error codes and partial reads, but because sizeof() is size_t (unsigned) type then negative error codes are type promoted to high positive values and the condition doesn't work as expected. Fixes: 332f989a ("CDC-NCM: handle incomplete transfer of MTU") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jouni Hogander authored
Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected by Syzkaller in slcan. Same issue exists in slip.c and this patch is addressing the leak in slip.c. Here is the slcan memory leak trace reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xfffffffffffffff Cc: "David S. Miller" <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: -
Aleksander Morgado authored
These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The QMI interface is exposed in USB configuration #1: P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.4-20191113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-13 this is a pull request of 9 patches for net/master, hopefully for the v5.4 release cycle. All nine patches are by Oleksij Rempel and fix locking and use-after-free bugs in the j1939 stack found by the syzkaller syzbot. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2019-11-13 1) Fix a page memleak on xfrm state destroy. 2) Fix a refcount imbalance if a xfrm_state gets invaild during async resumption. From Xiaodong Xu. ==================== Signed-off-by: -
Oleksij Rempel authored
j1939_session_destroy() and __j1939_priv_release() should be called only if session, ecu or socket are not linked or used by any one else. If at least one of these resources is linked, then the reference counting is broken somewhere. This warning will be triggered before KASAN will do, and will make it easier to debug initial issue. This works on platforms without KASAN support. Signed-off-by:Oleksij Rempel <o.rempel@pengutronix.de>
-
Oleksij Rempel authored
j1939_can_recv() can be called in parallel with socket release. In this case sk_release and sk_destruct can be done earlier than j1939_can_recv() is processed. Reported-by: syzbot+ca172a0ac477ac90f045@syzkaller.appspotmail.com Reported-by: syzbot+07ca5bce8530070a5650@syzkaller.appspotmail.com Reported-by: syzbot+a47537d3964ef6c874e1@syzkaller.appspotmail.com Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
can: j1939: transport: j1939_cancel_active_session(): use hrtimer_try_to_cancel() instead of hrtimer_cancel() This part of the code protected by lock used in the hrtimer as well. Using hrtimer_cancel() will trigger dead lock. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
We link the socket to the session to be able provide socket specific notifications. For example messages over error queue. We need to keep the socket held, while we have a reference to it. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
j1939_session_cancel() was modifying session->state without protecting it by locks and without checking actual state of the session. This patch moves j1939_tp_set_rxtimeout() into j1939_session_cancel() and adds the missing locking. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
j1939_sk_sendmsg() should be protected by lock_sock() to avoid race with j1939_sk_bind() and j1939_sk_release(). Reported-by: syzbot+afd421337a736d6c1ee6@syzkaller.appspotmail.com Reported-by: syzbot+6d04f6a1b31a0ae12ca9@syzkaller.appspotmail.com Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
This patch avoids a NULL pointer deref crash if ndev->ml_priv is NULL. Reported-by: syzbot+95c8e0d9dffde15b6c5c@syzkaller.appspotmail.com Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
This patch delays the j1939_priv_put() until the socket is destroyed via the sk_destruct callback, to avoid use-after-free problems. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
In j1939 we need our own struct sock::sk_destruct callback. Export the generic af_can can_sock_destruct() that allows us to chain-call it. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Ioana Ciornei authored
The setup_dpio() function tries to allocate a number of channels equal to the number of CPUs online. When there are not enough DPCON objects already probed, the function will return EPROBE_DEFER. When this happens, the already allocated channels are not freed. This results in the incapacity of properly probing the next time around. Fix this by freeing the channels on the error path. Fixes: d7f5a9d8 ("dpaa2-eth: defer probe on object allocate") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
- 12 Nov, 2019 6 commits
-
-
Ursula Braun authored
If an SMC socket is immediately terminated after a non-blocking connect() has been called, a memory leak is possible. Due to the sock_hold move in commit 301428ea ("net/smc: fix refcounting for non-blocking connect()") an extra sock_put() is needed in smc_connect_work(), if the internal TCP socket is aborted and cancels the sk_stream_wait_connect() of the connect worker. Reported-by: syzbot+4b73ad6fc767e576e275@syzkaller.appspotmail.com Fixes: 301428ea ("net/smc: fix refcounting for non-blocking connect()") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Xiaodong Xu authored
An ESP packet could be decrypted in async mode if the input handler for this packet returns -EINPROGRESS in xfrm_input(). At this moment the device reference in skb is held. Later xfrm_input() will be invoked again to resume the processing. If the transform state is still valid it would continue to release the device reference and there won't be a problem; however if the transform state is not valid when async resumption happens, the packet will be dropped while the device reference is still being held. When the device is deleted for some reason and the reference to this device is not properly released, the kernel will keep logging like: unregister_netdevice: waiting for ppp2 to become free. Usage count = 1 The issue is observed when running IPsec traffic over a PPPoE device based on a bridge interface. By terminating the PPPoE connection on the server end for multiple times, the PPPoE device on the client side will eventually get stuck on the above warning message. This patch will check the async mode first and continue to release device reference in async resumption, before it is dropped due to invalid state. v2: Do not assign address family from outer_mode in the transform if the state is invalid v3: Release device reference in the error path instead of jumping to resume Fixes: 4ce3dbe3 ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)") Signed-off-by:
Xiaodong Xu <stid.smth@gmail.com> Reported-by:
Bo Chen <chenborfc@163.com> Tested-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
YueHaibing authored
Fix coccinelle warning: ./drivers/net/phy/mdio_bus.c:67:5-12: ERROR: PTR_ERR applied after initialization to constant on line 62 ./drivers/net/phy/mdio_bus.c:68:5-12: ERROR: PTR_ERR applied after initialization to constant on line 62 Fix this by using IS_ERR before PTR_ERR Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 71dd6c0d ("net: phy: add support for reset-controller") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Stephan Gerhold authored
I2C communication errors (-EREMOTEIO) during the IRQ handler of nxp-nci result in a NULL pointer dereference at the moment: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 355 Comm: irq/137-nxp-nci Not tainted 5.4.0-rc6 #1 RIP: 0010:skb_queue_tail+0x25/0x50 Call Trace: nci_recv_frame+0x36/0x90 [nci] nxp_nci_i2c_irq_thread_fn+0xd1/0x285 [nxp_nci_i2c] ? preempt_count_add+0x68/0xa0 ? irq_forced_thread_fn+0x80/0x80 irq_thread_fn+0x20/0x60 irq_thread+0xee/0x180 ? wake_threads_waitq+0x30/0x30 kthread+0xfb/0x130 ? irq_thread_check_affinity+0xd0/0xd0 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x40 Afterward the kernel must be rebooted to work properly again. This happens because it attempts to call nci_recv_frame() with skb == NULL. However, unlike nxp_nci_fw_recv_frame(), nci_recv_frame() does not have any NULL checks for skb, causing the NULL pointer dereference. Change the code to call only nxp_nci_fw_recv_frame() in case of an error. Make sure to log it so it is obvious that a communication error occurred. The error above then becomes: nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121 nci: __nci_request: wait_for_completion_interruptible_timeout failed 0 nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121 Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jiri Pirko authored
Call devlink enable only during probe time and avoid deadlock during reload. Reported-by:
Shalom Toledo <shalomt@mellanox.com> Fixes: 5a508a25 ("devlink: disallow reload operation during device cleanup") Signed-off-by:
-
Aya Levin authored
When setting the dump's time-stamp, use ktime_get_real in addition to jiffies. This simplifies the user space implementation and bypasses some inconsistent behavior with translating jiffies to current time. The time taken is transformed into nsec, to comply with y2038 issue. Fixes: c8e1da0b ("devlink: Add health report functionality") Signed-off-by:
Aya Levin <ayal@mellanox.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 11 Nov, 2019 1 commit
-
-
Corentin Labbe authored
When PHY is not powered, the probe function fail and some resource are still unallocated. Furthermore some BUG happens: dwmac-sun8i 5020000.ethernet: EMAC reset timeout ------------[ cut here ]------------ kernel BUG at /linux-next/net/core/dev.c:9844! So let's use the right function (stmmac_pltfr_remove) in the error path. Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i") Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
- 10 Nov, 2019 2 commits
-
-
Tony Lu authored
This removes '\n' from trace event class tcp_event_sk_skb to avoid redundant new blank line and make output compact. Fixes: af4325ec ("tcp: expose sk_state in tcp_retransmit_skb tracepoint") Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Jiri Pirko authored
There is a race between driver code that does setup/cleanup of device and devlink reload operation that in some drivers works with the same code. Use after free could we easily obtained by running: while true; do echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/bind devlink dev reload pci/0000:00:10.0 & echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/unbind done Fix this by enabling reload only after setup of device is complete and disabling it at the beginning of the cleanup process. Reported-by:
-
- 09 Nov, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) BPF sample build fixes from Björn Töpel 2) Fix powerpc bpf tail call implementation, from Eric Dumazet. 3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet. 4) Fix crash in ebtables when using dnat target, from Florian Westphal. 5) Fix port disable handling whne removing bcm_sf2 driver, from Florian Fainelli. 6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski. 7) Various KCSAN fixes all over the networking, from Eric Dumazet. 8) Memory leaks in mlx5 driver, from Alex Vesker. 9) SMC interface refcounting fix, from Ursula Braun. 10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu. 11) Add a TX lock to synchonize the kTLS TX path properly with crypto operations. From Jakub Kicinski. 12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano Garzarella. 13) Infinite loop in Intel ice driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) ixgbe: need_wakeup flag might not be set for Tx i40e: need_wakeup flag might not be set for Tx igb/igc: use ktime accessors for skb->tstamp i40e: Fix for ethtool -m issue on X722 NIC iavf: initialize ITRN registers with correct values ice: fix potential infinite loop because loop counter being too small qede: fix NULL pointer deref in __qede_remove() net: fix data-race in neigh_event_send() vsock/virtio: fix sock refcnt holding during the shutdown net: ethernet: octeon_mgmt: Account for second possible VLAN header mac80211: fix station inactive_time shortly after boot net/fq_impl: Switch to kvmalloc() for memory allocation mac80211: fix ieee80211_txq_setup_flows() failure path ipv4: Fix table id reference in fib_sync_down_addr ipv6: fixes rt6_probe() and fib6_nh->last_probe init net: hns: Fix the stray netpoll locks causing deadlock in NAPI path net: usb: qmi_wwan: add support for DW5821e with eSIM support CDC-NCM: handle incomplete transfer of MTU nfc: netlink: fix double device reference drop NFC: st21nfca: fix double free ...
-
