- 05 Dec, 2019 40 commits
-
-
Lucas Stach authored
[ Upstream commit eb0200a4 ] On a NOP double buffer update where current buffer address is the same as the next buffer address, the SDW_UPDATE bit clears too late. As we are now using this bit to determine when it is safe to signal flip completion to userspace this will delay completion of atomic commits where one plane doesn't change the buffer by a whole frame period. Fix this by remembering the last buffer address and just skip the double buffer update if it would not change the buffer address. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
He Zhe authored
[ Upstream commit 352c4cf4 ] The initialization code of interrupt backoff work might reference NULL pointer and cause the following crash, if no port was found. [ 10.017727] CPU 0 Unable to handle kernel paging request at virtual address 000001b0, epc == 807088e0, ra == 8070863c ---- snip ---- [ 11.704470] [<807088e0>] serial8250_register_8250_port+0x318/0x4ac [ 11.747251] [<80708d74>] serial8250_probe+0x148/0x1c0 [ 11.789301] [<80728450>] platform_drv_probe+0x40/0x94 [ 11.830515] [<807264f8>] really_probe+0xf8/0x318 [ 11.870876] [<80726b7c>] __driver_attach+0x110/0x12c [ 11.910960] [<80724374>] bus_for_each_dev+0x78/0xcc [ 11.951134] [<80725958>] bus_add_driver+0x200/0x234 [ 11.989756] [<807273d8>] driver_register+0x84/0x148 [ 12.029832] [<80d72f84>] serial8250_init+0x138/0x198 [ 12.070447] [<80100e6c>] do_one_initcall+0x5c/0x2a0 [ 12.110104] [<80d3a208>] kernel_init_freeable+0x370/0x484 [ 12.150722] [<80a49420>] kernel_init+0x10/0xf8 [ 12.191517] [<8010756c>] ret_from_kernel_thread+0x14/0x1c This patch makes sure the initialization code can be reached only if a port is found. Fixes: 6d7f677a ("serial: 8250: Rate limit serial port rx interrupts during input overruns") Signed-off-by:
He Zhe <zhe.he@windriver.com> Reviewed-by:
Darwin Dingel <darwin.dingel@alliedtelesis.co.nz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 01b833ab ] This should be 1 for normal allocations, 0 disables leak reporting. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Fixes: 85704cb8 ("net/core/neighbour: tell kmemleak about hash tables") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ming Lei authored
[ Upstream commit 77f88abd ] The API of pci_alloc_irq_vectors_affinity() says it returns -ENOSPC if fewer than @min_vecs interrupt vectors are available for @dev. However, if a device supports MSI-X but not MSI and a caller requests @min_vecs that can't be satisfied by MSI-X, we previously returned -EINVAL (from the failed attempt to enable MSI), not -ENOSPC. When -ENOSPC is returned, callers may reduce the number IRQs they request and try again. Most callers can use the @min_vecs and @max_vecs parameters to avoid this retry loop, but that doesn't work when using IRQ affinity "nr_sets" because rebalancing the sets is driver-specific. This return value bug has been present since pci_alloc_irq_vectors() was added in v4.10 by aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines"), but it wasn't an issue because @min_vecs/@max_vecs removed the need for callers to iteratively reduce the number of IRQs requested and retry the allocation, so they didn't need to distinguish -ENOSPC from -EINVAL. In v5.0, 6da4b3ab ("genirq/affinity: Add support for allocating interrupt sets") added IRQ sets to the interface, which reintroduced the need to check for -ENOSPC and possibly reduce the number of IRQs requested and retry the allocation. Signed-off-by:
Ming Lei <ming.lei@redhat.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Jens Axboe <axboe@fb.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Miquel Raynal authored
[ Upstream commit 96dbcb40 ] At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 85704cb8 ] This fixes false-positive kmemleak reports about leaked neighbour entries: unreferenced object 0xffff8885c6e4d0a8 (size 1024): comm "softirq", pid 0, jiffies 4294922664 (age 167640.804s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 20 2c f3 83 ff ff ff ff ........ ,...... 08 c0 ef 5f 84 88 ff ff 01 8c 7d 02 01 00 00 00 ..._......}..... backtrace: [<00000000748509fe>] ip6_finish_output2+0x887/0x1e40 [<0000000036d7a0d8>] ip6_output+0x1ba/0x600 [<0000000027ea7dba>] ip6_send_skb+0x92/0x2f0 [<00000000d6e2111d>] udp_v6_send_skb.isra.24+0x680/0x15e0 [<000000000668a8be>] udpv6_sendmsg+0x18c9/0x27a0 [<000000004bd5fa90>] sock_sendmsg+0xb3/0xf0 [<000000008227b29f>] ___sys_sendmsg+0x745/0x8f0 [<000000008698009d>] __sys_sendmsg+0xde/0x170 [<00000000889dacf1>] do_syscall_64+0x9b/0x400 [<0000000081cdb353>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000005767ed39>] 0xffffffffffffffff Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit f87d8ad9 ] There is a memory leak in case genlmsg_put fails. Fix this by freeing *args* before return. Addresses-Coverity-ID: 1476406 ("Resource leak") Fixes: 46273cf7 ("tipc: fix a missing check of genlmsg_put") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Boris Brezillon authored
[ Upstream commit 2b6f0090 ] add_mtd_device() can fail. We should always check its return value and gracefully handle the failure case. Fix the call sites where this not done (in mtdpart.c) and add a __must_check attribute to the prototype to avoid this kind of mistakes. Signed-off-by:
Boris Brezillon <bbrezillon@kernel.org> Signed-off-by:
-
Olof Johansson authored
[ Upstream commit 35004f2e ] Fixes build break on most ARM/ARM64 defconfigs: lib/genalloc.c: In function 'gen_pool_add_virt': lib/genalloc.c:190:10: error: implicit declaration of function 'vzalloc_node'; did you mean 'kzalloc_node'? lib/genalloc.c:190:8: warning: assignment to 'struct gen_pool_chunk *' from 'int' makes pointer from integer without a cast [-Wint-conversion] lib/genalloc.c: In function 'gen_pool_destroy': lib/genalloc.c:254:3: error: implicit declaration of function 'vfree'; did you mean 'kfree'? Fixes: 6862d2fc ('lib/genalloc.c: use vzalloc_node() to allocate the bitmap') Cc: Huang Shijie <sjhuang@iluvatar.ai> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Skidanov <alexey.skidanov@intel.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 967d3010 ] unreferenced object 0xffff808ec6dc5a80 (size 128): comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s) hex dump (first 32 bytes): ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500 [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8 [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450 [<00000000ef135642>] acpi_default_enumeration+0x34/0x78 [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000002968643e>] acpi_bus_scan+0xb0/0x110 [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410 [<00000000965b3c5a>] acpi_init+0x408/0x49c [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4 [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c [<0000000070ea6c15>] kernel_init+0x18/0x138 [<00000000fb8fff06>] ret_from_fork+0x10/0x1c [<0000000041273a0d>] 0xffffffffffffffff Then, faddr2line pointed out this line, /* * This memory isn't freed when the device is put, * I don't have a nice idea for that though. Conceptually * dma_mask in struct device should not be a pointer. * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 */ pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); Since this leak has existed for more than 8 years and it does not reference other parts of the memory, let kmemleak ignore it, so users don't need to waste time reporting this in the future. Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.usSigned-off-by:
Qian Cai <cai@gmx.us> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Yi Wang authored
[ Upstream commit fb5bf317 ] We get a warning when building kernel with W=1: kernel/fork.c:167:13: warning: no previous prototype for `arch_release_thread_stack' [-Wmissing-prototypes] kernel/fork.c:779:13: warning: no previous prototype for `fork_init' [-Wmissing-prototypes] Add the missing declaration in head file to fix this. Also, remove arch_release_thread_stack() completely because no arch seems to implement it since bb9d8126 (arch: remove tile port). Link: http://lkml.kernel.org/r/1542170087-23645-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by:
Yi Wang <wang.yi59@zte.com.cn> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
Huang Shijie authored
[ Upstream commit 6862d2fc ] Some devices may have big memory on chip, such as over 1G. In some cases, the nbytes maybe bigger then 4M which is the bounday of the memory buddy system (4K default). So use vzalloc_node() to allocate the bitmap. Also use vfree to free it. Link: http://lkml.kernel.org/r/20181225015701.6289-1-sjhuang@iluvatar.aiSigned-off-by:
Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by:
-
Alexey Skidanov authored
[ Upstream commit 52fbf113 ] gen_pool_alloc_algo() uses different allocation functions implementing different allocation algorithms. With gen_pool_first_fit_align() allocation function, the returned address should be aligned on the requested boundary. If chunk start address isn't aligned on the requested boundary, the returned address isn't aligned too. The only way to get properly aligned address is to initialize the pool with chunks aligned on the requested boundary. If want to have an ability to allocate buffers aligned on different boundaries (for example, 4K, 1MB, ...), the chunk start address should be aligned on the max possible alignment. This happens because gen_pool_first_fit_align() looks for properly aligned memory block without taking into account the chunk start address alignment. To fix this, we provide chunk start address to gen_pool_first_fit_align() and change its implementation such that it starts looking for properly aligned block with appropriate offset (exactly as is done in CMA). Link: https://lkml.kernel.org/lkml/a170cf65-6884-3592-1de9-4c235888cc8a@intel.com Link: http://lkml.kernel.org/r/1541690953-4623-1-git-send-email-alexey.skidanov@intel.comSigned-off-by:
Alexey Skidanov <alexey.skidanov@intel.com> Reviewed-by:
-
James Morse authored
[ Upstream commit acafce48 ] It turns out the dt-probing part of this wasn't tested properly after it was merged. commit 3aa0582f ("of: platform: populate /firmware/ node from of_platform_default_populate_init()") changed the core-code to generate the platform devices, meaning the driver's attempt fails, and it bails out. Fix this by removing the manual platform-device creation for DT systems, core code has always done this for us. CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Nicolas Saenz Julienne authored
[ Upstream commit c3790b37 ] After finding a "firmware" dt node arm_sdei tries to match it's compatible string with it. To do so it's calling of_find_matching_node() which already takes care of decreasing the refcount on the "firmware" node. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 9c6260de ] idr_find() may fail and return a NULL pointer. The fix checks the return value of the function and returns an error in case of NULL. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Acked-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 94edd87a ] In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an error value but it is lost. Propagate this error to the callers. Signed-off-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit 07e10308 ] If a reply has been processed but the RPC is later retransmitted anyway, the req->rl_reply field still contains the only pointer to the old rpcrdma rep. When the next reply comes in, the reply handler will stomp on the rl_reply field, leaking the old rep. A trace event is added to capture such leaks. This problem seems to be worsened by the restructuring of the RPC Call path in v4.20. Fully addressing this issue will require at least a re-architecture of the disconnect logic, which is not appropriate during -rc. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit eb895086 ] If nla_nest_start() may fail. The fix checks its return value and goes to nla_put_failure if it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Anthony Yznaga authored
[ Upstream commit b6fb87b8 ] Because kpagecount_read() fakes success if map counts are not being collected, clamp the page count passed to it by walk_pfn() to the pages value returned by the preceding call to kpageflags_read(). Link: http://lkml.kernel.org/r/1543962269-26116-1-git-send-email-anthony.yznaga@oracle.com Fixes: 7f1d23e6 ("tools/vm/page-types.c: include shared map counts") Signed-off-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Wentao Wang authored
[ Upstream commit d31cfe7b ] Link: http://lkml.kernel.org/r/C8ECE1B7A767434691FEEFA3A01765D72AFB8E78@MX203CL03.corp.emc.comSigned-off-by:
Wentao Wang <witallwang@gmail.com> Reviewed-by:
-
Aaron Lu authored
[ Upstream commit 742aa7fb ] There are multiple places of freeing a page, they all do the same things so a common function can be used to reduce code duplicate. It also avoids bug fixed in one function but left in another. Link: http://lkml.kernel.org/r/20181119134834.17765-3-aaron.lu@intel.comSigned-off-by:
Aaron Lu <aaron.lu@intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pankaj gupta <pagupta@redhat.com> Cc: Pawel Staszewski <pstaszewski@itcare.pl> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Aaron Lu authored
[ Upstream commit 65895b67 ] page_frag_free() calls __free_pages_ok() to free the page back to Buddy. This is OK for high order page, but for order-0 pages, it misses the optimization opportunity of using Per-Cpu-Pages and can cause zone lock contention when called frequently. Pawel Staszewski recently shared his result of 'how Linux kernel handles normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the lock contention comes from page allocator: mlx5e_poll_tx_cq | --16.34%--napi_consume_skb | |--12.65%--__free_pages_ok | | | --11.86%--free_one_page | | | |--10.10%--queued_spin_lock_slowpath | | | --0.65%--_raw_spin_lock | |--1.55%--page_frag_free | --1.44%--skb_release_data Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is not effective in this workload and pages have to go through the page allocator. The lock contention happens during mlx5 DMA TX completion cycle. And the page allocator cannot keep up at these speeds.[2] I thought that __free_pages_ok() are mostly freeing high order pages and thought this is an lock contention for high order pages but Jesper explained in detail that __free_pages_ok() here are actually freeing order-0 pages because mlx5 is using order-0 pages to satisfy its page pool allocation request.[3] The free path as pointed out by Jesper is: skb_free_head() -> skb_free_frag() -> page_frag_free() And the pages being freed on this path are order-0 pages. Fix this by doing similar things as in __page_frag_cache_drain() - send the being freed page to PCP if it's an order-0 page, or directly to Buddy if it is a high order page. With this change, Paweł hasn't noticed lock contention yet in his workload and Jesper has noticed a 7% performance improvement using a micro benchmark and lock contention is gone. Ilias' test on a 'low' speed 1Gbit interface on an cortex-a53 shows ~11% performance boost testing with 64byte packets and __free_pages_ok() disappeared from perf top. [1]: https://www.spinics.net/lists/netdev/msg531362.html [2]: https://www.spinics.net/lists/netdev/msg531421.html [3]: https://www.spinics.net/lists/netdev/msg531556.html [akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.comSigned-off-by:
Pawel Staszewski <pstaszewski@itcare.pl> Analysed-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by:
Tariq Toukan <tariqt@mellanox.com> Acked-by:
Pankaj gupta <pagupta@redhat.com> Signed-off-by:
-
Wei Yang authored
[ Upstream commit 8b09549c ] Commit fa5e084e ("vmscan: do not unconditionally treat zones that fail zone_reclaim() as full") changed the return value of node_reclaim(). The original return value 0 means NODE_RECLAIM_SOME after this commit. While the return value of node_reclaim() when CONFIG_NUMA is n is not changed. This will leads to call zone_watermark_ok() again. This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN. Since node_reclaim() is only called in page_alloc.c, move it to mm/internal.h. Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.comSigned-off-by:
Wei Yang <richard.weiyang@gmail.com> Acked-by:
Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Junxiao Bi authored
[ Upstream commit d85400af ] Dirty flag of the journal should be cleared at the last stage of umount, if do it before jbd2_journal_destroy(), then some metadata in uncommitted transaction could be lost due to io error, but as dirty flag of journal was already cleared, we can't find that until run a full fsck. This may cause system panic or other corruption. Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 40752b3e ] This patch fixes potential double frees if register_hdlc_device() fails. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Reviewed-by:
Peng Hao <peng.hao2@zte.com.cn> CC: Zhao Qiang <qiang.zhao@nxp.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org CC: linuxppc-dev@lists.ozlabs.org CC: linux-kernel@vger.kernel.org Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 92ee77d1 ] When acpi_match_device fails, its return value is NULL. Directly using the return value without a check may result in a NULL-pointer dereference. The fix checks if acpi_match_device fails, and if so, returns -EINVAL. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 46273cf7 ] genlmsg_put could fail. The fix inserts a check of its return value, and if it fails, returns -EMSGSIZE. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit ff07d48d ] atl1e_write_phy_reg() could fail. The fix issues an error message when it fails. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit e49505f7 ] Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's return their error codes upstream. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit f86a3b83 ] clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 2d822f2d ] clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit 550ed0e2 ] Both do more or less the same thing and are mutually exclusive. If both are enabled the build will fail. Sooner or later we can kill UML's GCOV. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit 0053102a ] sys/uio.h gives us writev(), otherwise the build might fail on some systems. Fixes: 49da7e64 ("High Performance UML Vector Network Driver") Signed-off-by:
-
Chao Yu authored
[ Upstream commit b32e0190 ] If user change inode's i_flags via ioctl, let's add it into global dirty list, so that checkpoint can guarantee its persistence before fsync, it can make checkpoint keeping strong consistency. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Qiuyang Sun authored
[ Upstream commit 9249dded ] Should use lstart (logical start address) instead of start (in dev) here. This fixes a bug in multi-device scenarios. Signed-off-by:
Qiuyang Sun <sunqiuyang@huawei.com> Reviewed-by:
-
Aditya Pakki authored
[ Upstream commit 0eb987c8 ] In net_ns_init(), register_pernet_subsys() could fail while registering network namespace subsystems. The fix checks the return value and sends a panic() on failure. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 89dfd008 ] In tipc_nl_compat_sk_dump(), if nla_parse_nested() fails, it could return an error. To be consistent with other invocations of the function call, on error, the fix passes the return value upstream. Signed-off-by:
-
Alexander Shiyan authored
[ Upstream commit b0f17570 ] Commit e39c0df1 ("pwm: Introduce the pwm_args concept") has changed the variable for the period for clps711x-pwm driver, so now pwm_get/set_period() works with pwm->state.period variable instead of pwm->args.period. This patch changes the period variable in other places where it is used. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 2326828e ] The following build warnings are seen when building for ARM64 allmodconfig: drivers/crypto/mxc-scc.c:181:20: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] drivers/crypto/mxc-scc.c:186:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] drivers/crypto/mxc-scc.c:277:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] drivers/crypto/mxc-scc.c:339:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/crypto/mxc-scc.c:340:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fix them by using the %zu specifier to print a size_t variable and using a plain %x to print the result of a readl(). Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
