Skip to content

L
linux
Switch branch/tag
  1. 15 May, 2015 23 commits
  3. 14 May, 2015 17 commits
    • Willem de Bruijn's avatar
      packet: fix warnings in rollover lock contention · 54d7c01d
      Willem de Bruijn authored 
      Avoid two xchg calls whose return values were unused, causing a
warning on some architectures.

The relevant variable is a hint and read without mutual exclusion.
This fix makes all writers hold the receive_queue lock.
Suggested-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      54d7c01d
    • françois romieu's avatar
      net: batch of last_rx update avoidance in ethernet drivers. · 4ffd3c73
      françois romieu authored 
      None of those drivers uses last_rx for its own needs.

See 4dc89133 ("net: add a comment on
netdev->last_rx") for reference.
Signed-off-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ffd3c73
    • David S. Miller's avatar
      Merge branch 'phy_turn_around' · 7852dada
      David S. Miller authored 
      Florian Fainelli says:

====================
net: phy: broken turn-around support

This is an attempt at solving the broken turn-around problem in a way that
is not specific to the mdio-gpio driver, since it affects different kinds of
platforms.

We cannot make that localized to PHY device drivers because probing the PHY
device which has a broken turn-around can fail as early as in get_phy_id(),
therefore we need a bit of help from Device Tree/platform_data.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7852dada
    • Florian Fainelli's avatar
      net: phy: mdio-gpio: Handle phy_ignore_ta_mask · ea48b2b8
      Florian Fainelli authored 
      Update mdiobb_read() to read whether the PHY has a broken turn-around,
and if it does, ignore it to make the read succeeed.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ea48b2b8
    • Florian Fainelli's avatar
      of: mdio: Add a "broken-turn-around" property · ab6016e0
      Florian Fainelli authored 
      Some Ethernet PHY devices/switches may not properly release the MDIO bus
during turn-around time, and fail to drive it low, which can be seen by
some controllers as a read failure, while the data clocked in is still
correct.

Add a boolean property "broken-turn-around" which is parsed by the
generic MDIO bus probing code and will set the corresponding bit in the
MDIO bus phy_ignore_ta_mask bitmask for MDIO bus drivers to utilize that
information.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab6016e0
    • Florian Fainelli's avatar
      net: phy: Add phy_ignore_ta_mask to account for broken turn-around · 922f2dd1
      Florian Fainelli authored 
      Some PHY devices/switches will not release the turn-around line as they
should do at the end of a MDIO transaction. To help with such
situations, allow MDIO bus drivers to be made aware of such
restrictions.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      922f2dd1
    • Ying Xue's avatar
      tipc: use sock_create_kern interface to create kernel socket · fa787ae0
      Ying Xue authored 
      After commit eeb1bd5c ("net: Add a struct net parameter to
sock_create_kern"), we should use sock_create_kern() to create kernel
socket as the interface doesn't reference count struct net any more.
Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fa787ae0
    • Brian Haley's avatar
      cls_flower: Fix compile error · dd3aa3b5
      Brian Haley authored 
      Fix compile error in net/sched/cls_flower.c

    net/sched/cls_flower.c: In function ‘fl_set_key’:
    net/sched/cls_flower.c:240:3: error: implicit declaration of
     function ‘tcf_change_indev’ [-Werror=implicit-function-declaration]
       err = tcf_change_indev(net, tb[TCA_FLOWER_INDEV]);

Introduced in 77b9900e

Fixes: 77b9900e ("tc: introduce Flower classifier")
Signed-off-by: default avatarBrian Haley <brian.haley@hp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dd3aa3b5
    • David S. Miller's avatar
      Merge branch 'tipc-next' · b55b10be
      David S. Miller authored 
      Jon Maloy says:

====================
tipc: some link layer improvements

We continue eliminating redundant complexity at the link layer, and
add a couple of improvements to the packet sending functionality.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b55b10be
    • Jon Paul Maloy's avatar
      tipc: add packet sequence number at instant of transmission · dd3f9e70
      Jon Paul Maloy authored 
      Currently, the packet sequence number is updated and added to each
packet at the moment a packet is added to the link backlog queue.
This is wasteful, since it forces the code to traverse the send
packet list packet by packet when adding them to the backlog queue.
It would be better to just splice the whole packet list into the
backlog queue when that is the right action to do.

In this commit, we do this change. Also, since the sequence numbers
cannot now be assigned to the packets at the moment they are added
the backlog queue, we do instead calculate and add them at the moment
of transmission, when the backlog queue has to be traversed anyway.
We do this in the function tipc_link_push_packet().
Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dd3f9e70
    • Jon Paul Maloy's avatar
      tipc: improve link congestion algorithm · f21e897e
      Jon Paul Maloy authored 
      The link congestion algorithm used until now implies two problems.

- It is too generous towards lower-level messages in situations of high
  load by giving "absolute" bandwidth guarantees to the different
  priority levels. LOW traffic is guaranteed 10%, MEDIUM is guaranted
  20%, HIGH is guaranteed 30%, and CRITICAL is guaranteed 40% of the
  available bandwidth. But, in the absence of higher level traffic, the
  ratio between two distinct levels becomes unreasonable. E.g. if there
  is only LOW and MEDIUM traffic on a system, the former is guaranteed
  1/3 of the bandwidth, and the latter 2/3. This again means that if
  there is e.g. one LOW user and 10 MEDIUM users, the  former will have
  33.3% of the bandwidth, and the others will have to compete for the
  remainder, i.e. each will end up with 6.7% of the capacity.

- Packets of type MSG_BUNDLER are created at SYSTEM importance level,
  but only after the packets bundled into it have passed the congestion
  test for their own respective levels. Since bundled packets don't
  result in incrementing the level counter for their own importance,
  only occasionally for the SYSTEM level counter, they do in practice
  obtain SYSTEM level importance. Hence, the current implementation
  provides a gap in the congestion algorithm that in the worst case
  may lead to a link reset.

We now refine the congestion algorithm as follows:

- A message is accepted to the link backlog only if its own level
  counter, and all superior level counters, permit it.

- The importance of a created bundle packet is set according to its
  contents. A bundle packet created from messges at levels LOW to
  CRITICAL is given importance level CRITICAL, while a bundle created
  from a SYSTEM level message is given importance SYSTEM. In the latter
  case only subsequent SYSTEM level messages are allowed to be bundled
  into it.

This solves the first problem described above, by making the bandwidth
guarantee relative to the total number of users at all levels; only
the upper limit for each level remains absolute. In the example
described above, the single LOW user would use 1/11th of the bandwidth,
the same as each of the ten MEDIUM users, but he still has the same
guarantee against starvation as the latter ones.

The fix also solves the second problem. If the CRITICAL level is filled
up by bundle packets of that level, no lower level packets will be
accepted any more.
Suggested-by: default avatarGergely Kiss <gergely.kiss@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f21e897e
    • Jon Paul Maloy's avatar
      tipc: simplify link supervision checkpointing · cd4eee3c
      Jon Paul Maloy authored 
      We change the sequence number checkpointing that is performed
by the timer in order to discover if the peer is active. Currently,
we store a checkpoint of the next expected sequence number "rcv_nxt"
at each timer expiration, and compare it to the current expected
number at next timeout expiration. Instead, we now use the already
existing field "silent_intv_cnt" for this task. We step the counter
at each timeout expiration, and zero it at each valid received packet.
If no valid packet has been received from the peer after "abort_limit"
number of silent timer intervals, the link is declared faulty and reset.

We also remove the multiple instances of timer activation from inside
the FSM function "link_state_event()", and now do it at only one place;
at the end of the timer function itself.
Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd4eee3c
    • Jon Paul Maloy's avatar
      tipc: rename fields in struct tipc_link · a97b9d3f
      Jon Paul Maloy authored 
      We rename some fields in struct tipc_link, in order to give them more
descriptive names:

next_in_no -> rcv_nxt
next_out_no-> snd_nxt
fsm_msg_cnt-> silent_intv_cnt
cont_intv  -> keepalive_intv
last_retransmitted -> last_retransm

There are no functional changes in this commit.
Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a97b9d3f
    • Jon Paul Maloy's avatar
      tipc: simplify packet sequence number handling · e4bf4f76
      Jon Paul Maloy authored 
      Although the sequence number in the TIPC protocol is 16 bits, we have
until now stored it internally as an unsigned 32 bits integer.
We got around this by always doing explicit modulo-65535 operations
whenever we need to access a sequence number.

We now make the incoming and outgoing sequence numbers to unsigned
16-bit integers, and remove the modulo operations where applicable.

We also move the arithmetic inline functions for 16 bit integers
to core.h, and the function buf_seqno() to msg.h, so they can easily
be accessed from anywhere in the code.
Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4bf4f76
    • Jon Paul Maloy's avatar
      tipc: simplify include dependencies · a6bf70f7
      Jon Paul Maloy authored 
      When we try to add new inline functions in the code, we sometimes
run into circular include dependencies.

The main problem is that the file core.h, which really should be at
the root of the dependency chain, instead is a leaf. I.e., core.h
includes a number of header files that themselves should be allowed
to include core.h. In reality this is unnecessary, because core.h does
not need to know the full signature of any of the structs it refers to,
only their type declaration.

In this commit, we remove all dependencies from core.h towards any
other tipc header file.

As a consequence of this change, we can now move the function
tipc_own_addr(net) from addr.c to addr.h, and make it inline.

There are no functional changes in this commit.
Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a6bf70f7
    • Jon Paul Maloy's avatar
      tipc: simplify link timer handling · 75b44b01
      Jon Paul Maloy authored 
      Prior to this commit, the link timer has been running at a "continuity
interval" of configured link tolerance/4. When a timer wakes up and
discovers that there has been no sign of life from the peer during the
previous interval, it divides its own timer interval by another factor
four, and starts sending one probe per new interval. When the configured
link tolerance time has passed without answer, i.e. after 16 unacked
probes, the link is declared faulty and reset.

This is unnecessary complex. It is sufficient to continue with the
original continuity interval, and instead reset the link after four
missed probe responses. This makes the timer handling in the link
simpler, and opens up for some planned later changes in this area.
This commit implements this change.
Reviewed-by: default avatarRichard Alpe <richard.alpe@ericsson.com>
Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      75b44b01
    • Jon Paul Maloy's avatar
      tipc: simplify resetting and disabling of bearers · b1c29f6b
      Jon Paul Maloy authored 
      Since commit 4b475e3f2f8e4e241de101c8240f1d74d0470494
("tipc: eliminate delayed link deletion at link failover") the extra
boolean parameter "shutting_down" is not any longer needed for the
functions bearer_disable() and tipc_link_delete_list().

Furhermore, the function tipc_link_reset_links(), called from
bearer_reset()  is now unnecessary. We can just as well delete
all the links, as we do in bearer_disable(), and start over with
creating new links.

This commit introduces those changes.
Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b1c29f6b
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7