- 27 Jul, 2011 40 commits
-
-
Guennadi Liakhovetski authored
Now that v4l2 subdevices have got their own device objects, having one more device in soc-camera clients became redundant and confusing. This patch removes those devices and the soc-camera bus, they used to reside on. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
The soc-camera bus is now completely local again. Signed-off-by:
-
Guennadi Liakhovetski authored
This moves us one more step closer to eliminating the soc-camera bus and devices on it. Besides, as a side effect, CSI-2 runtime PM on sh-mobile secomes finer grained now: we only have to power on the interface, when the device nodes are open. Signed-off-by:
-
Guennadi Liakhovetski authored
Add media bus configuration types and two subdev operations to get supported mediabus configurations and to set a specific configuration. Subdevs can support several configurations, e.g., they can send video data on 1 or several lanes, can be configured to use a specific CSI-2 channel, in such cases subdevice drivers return bitmasks with all respective bits set. When a set-configuration operation is called, it has to specify a non-ambiguous configuration. Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
soc-camera host drivers shall be implementing their PM, using standard kernel methods, soc-camera specific hooks can die. Signed-off-by:
-
Guennadi Liakhovetski authored
The pxa-camera driver doesn't need soc-camera specific PM callbacks, switch it to using the standard PM hooks instead. Signed-off-by:
-
Abylay Ospan authored
Currently available two hardware revision: 0x1 firmware filename: dvb-netup-altera-01.fw 0x4 firmware filename: dvb-netup-altera-04.fw Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Abylay Ospan authored
Signed-off-by:
-
Abylay Ospan authored
Currently available two hardware revision: 0x1 firmware filename: dvb-netup-altera-01.fw 0x4 firmware filename: dvb-netup-altera-04.fw Signed-off-by:
-
Laurent Pinchart authored
Add two fields to the ISP parallel platform data to set the HS and VS signals polarities. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Kalle Jokiniemi authored
The RX-51 uses the CSIb IO complex for camera operation. The board file is missing definition for the regulator supplying the CSIb complex, so this is added for better power management. Signed-off-by:
Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-by:
-
Kalle Jokiniemi authored
The current omap3isp driver is missing regulator handling for CSIb complex in omap34xx based devices. This patch adds a mechanism for this to the omap3isp driver. Signed-off-by:
-
Amber Jain authored
Minor changes to remove the unused code from omap_vout driver. Signed-off-by:
Amber Jain <amber@ti.com> Signed-off-by:
Samreen <samreen@ti.com> Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Amber Jain authored
Add support to map the buffer using dma_map_single during qbuf which inturn calls cache flush and unmap the same during dqbuf. This is done to prevent the artifacts seen because of cache-coherency issues on OMAP4 Signed-off-by:
-
Amber Jain authored
Extending the omap vout isr handling for: - HDMI interface. These are the new interfaces added to OMAP4 DSS. Signed-off-by:
-
archit taneja authored
Introduce omap_vout_vrfb.c and omap_vout_vrfb.h, for all VRFB related API's, making OMAP_VOUT driver independent from VRFB. This is required for OMAP4 DSS, since OMAP4 doesn't have VRFB block. Added new enum vout_rotation_type and "rotation_type" member to omapvideo_info, this is initialized based on the arch type in omap_vout_probe. The rotation_type var is now used to choose between vrfb and non-vrfb calls. Signed-off-by:
Archit Taneja <archit@ti.com> Signed-off-by:
-
archit taneja authored
Rename rotation_enabled() and rotate_90_or_270() to is_rotation_enabled() and is_rotation_90_or_270() to make them more descriptive. Signed-off-by:
-
archit taneja authored
Move the inline functions rotate_90_or_270(), rotation_enabled(), and calc_rotation() from omap_vout.c to omap_voutdef.h. Move the independent functions omap_vout_alloc_buffer() and omap_vout_free_buffer() to omap_voutlib.c. Remove extern identifier from function definitions in omap_voutlib.h Add static identifier to functions that are used locally in omap_vout.c Signed-off-by:
-
Amber Jain authored
Remove GFP_DMA from the __get_free_pages() call from omap24xxcam as ZONE_DMA is not configured on OMAP. Earlier the page allocator used to return a page from ZONE_NORMAL even when GFP_DMA is passed and CONFIG_ZONE_DMA is disabled. As a result of commit a197b59a, page allocator returns null in such a scenario with a warning emitted to kernel log. Signed-off-by:
-
Amber Jain authored
Remove GFP_DMA from the __get_free_pages() call from omap_vout as ZONE_DMA is not configured on OMAP. Earlier the page allocator used to return a page from ZONE_NORMAL even when GFP_DMA is passed and CONFIG_ZONE_DMA is disabled. As a result of commit a197b59a, page allocator returns null in such a scenario with a warning emitted to kernel log. Signed-off-by:
-
Kirill Smelkov authored
The camera there identifies itself as being manufactured by Cheng Uei Precision Industry Co., Ltd (Foxlink), and product is titled as "HP Webcam [2 MP Fixed]". I was trying to get 2 USB video capture devices to work simultaneously, and noticed that the above mentioned webcam always requires packet size = 3072 bytes per micro frame (~= 23.4 MB/s isoc bandwidth), which is far more than enough to get standard NTSC 640x480x2x30 = ~17.6 MB/s isoc bandwidth. As there are alt interfaces with smaller MxPS T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05c8 ProdID=0403 Rev= 1.06 S: Manufacturer=Foxlink S: Product=HP Webcam [2 MP Fixed] S: SerialNumber=200909240102 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 512 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1536 Ivl=125us I: If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us I: If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2688 Ivl=125us I: If#= 1 Alt= 7 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us UVC_QUIRK_FIX_BANDWIDTH helps here and NTSC video can be served with MxPS=2688 i.e. 20.5 MB/s isoc bandwidth. In terms of microframe time allocation, before the quirk NTSC video required 60 usecs / microframe and 53 usecs / microframe after. Acked-by:Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by:
-
Devin Heitmueller authored
The signal state field in G_TUNER is typically scaled from 0-100%. Since we don't know the signal level, we really would prefer the field to contain 100% than 1/256, which in many utilities (such as v4l2-ctl) rounds to 0% even when a signal is actually present. This patch makes the behavior consistent with other drivers. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Make use of the signal state registers to properly populate the signal lock registers in the cx231xx driver. This allows applications to know whether there is a signal present even in devices which lack a tuner (since such apps typically won't call G_TUNER if no tuner is present). [mchehab@redhat.com: Fix CodingStyle: don't use {} for one-line if's] Signed-off-by: -
Devin Heitmueller authored
On platforms that have CONFIG_HZ set to 100, the power ramp time effectively ends up being 10ms. However, on those that have a higher CONFIG_HZ, the time ends up *actually* being 5ms, which doesn't allow enough time for the hardware to be fully powered up before attempting to address it via i2c. Change the constant to 10ms, which is long enough for the hardware to power up, and won't really be anymore time than it was previously on platforms with CONFIG_HZ being 100. Credit goes to Mauro Carvalho Chehab and Gerd Hoffmann who previously investigated this issue. Tested with the Hauppauge USBLive 2, with which the problem was readily reproducible after setting CONFIG_HZ to 1000. Signed-off-by:
-
Devin Heitmueller authored
The following patch addresses the regression introduced in the cx231xx driver which stopped the Hauppauge USBLive2 from working. Confirmed working by both myself and the user who reported the issue on the KernelLabs blog (Robert DeLuca). At some point during refactoring of the cx231xx driver, the USBLive 2 device became broken. This patch results in the device working again. Thanks to Robert DeLuca for sponsoring this work. Signed-off-by:
-
Stephan Lachowsky authored
The search for matching extension units fails to take account of the current chain. In the case where you have two distinct video chains, both containing an XU with the same GUID but different unit ids, you will be unable to perform a mapping on the second chain because entity on the first chain will always be found first Fix this by only searching the current chain when performing a control mapping. This is analogous to the search used by uvc_find_control(), and is the correct behaviour. Signed-off-by:
Stephan Lachowsky <stephan.lachowsky@maxim-ic.com> Acked-by:
-
Sergei Shtylyov authored
The driver reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by:Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Fix the DRX-K logic that selects between DVB-C annex A and C Fix a typo where DVB-C annex type is set via setEnvParameters, but the driver, uses, instead, setParamParameters[2]. While here, cleans up the code, fixing a bad identation at the fallback code for other types of firmware, and put the multiple-line comments into the Linux CodingStyle. Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
After return, we don't need any other statement to change the function flux ;) Reported-by:
-
Mauro Carvalho Chehab authored
The error propagation changeset c23bf4402 broke the DVB-T code. The legacy way for propagate errors was: do { status = foo_func() if (status < 0) break; } while (0); return status; However, on a few places, it was doing: do { switch(foo) { case bar: status = foo_func() if (status < 0) break; break; } switch(foo2) { case bar: status = foo_func() if (status < 0) break; break; } ... } while (0); return (status) The inner error break were not working, as it were breaking only the switch, instead of the do. The solution used were to do a s/break/goto error/ at the inner breaks, but preserving the last break. Onfortunately, on a few switches, the replacement were applied also to the final break for the case statements. Fix the broken logic, by reverting them to break, where pertinent, in order to fix DVB-T support. Signed-off-by: -
Mauro Carvalho Chehab authored
Both ngene and ddbrige calls dvb_attach once for drxk_attach. The logic used there, and by tda18271c2dd driver is different from similar logic on other frontends. The right fix is to change them to use the same logic, but, while we don't do that, we need to patch em28xx-dvb in order to do cope with ngene/ddbridge magic. While here, document why drxk_t_release should do nothing. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This reverts commit a3e4adf274f86b2363fedaa964297cb38526cef0. As pointed by Andread Oberritter <obi@linuxtv.org>: That's wrong, because the array size is DTV_MAX_COMMAND + 1. Using the ARRAY_SIZE macro instead might reduce the confusion. Also, changeset 3995223038 already fixed this issue. Reported-by:
Andread Oberritter <obi@linuxtv.org> Signed-off-by:
-
istvan_v@mailbox.hu authored
The following patch adds a new control that makes it possible to set the luma notch filter type to finetune picture quality. Signed-off-by:
Istvan Varga <istvan_v@mailbox.hu> Signed-off-by:
-
istvan_v@mailbox.hu authored
This patch implements support for a sharpness control, using the luma peaking filter feature of cx2388x. [mchehab@redhat.com: use cx_andor instead of cx_write] Signed-off-by:
-
Tomasz Stanislawski authored
Add driver for TV Mixer on Samsung platforms from S5P family. Mixer is responsible for merging images from three layers and passing result to the output. Drivers are using: - v4l2 framework - videobuf2 - runtime PM Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Tomasz Stanislawski authored
Add drivers for Standard Definition output (SDO) on Samsung platforms from S5P family. The driver provides control over streaming analog TV via Composite connector. Driver is using: - v4l2 framework - runtime PM Signed-off-by:
-
