Skip to content

L
linux
Switch branch/tag
  1. 15 Jul, 2018 9 commits
    • Ard Biesheuvel's avatar
      efi: Drop type and attribute checks in efi_mem_desc_lookup() · 7e1550b8
      Ard Biesheuvel authored 
      The current implementation of efi_mem_desc_lookup() includes the
following check on the memory descriptor it returns:

    if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
        md->type != EFI_BOOT_SERVICES_DATA &&
        md->type != EFI_RUNTIME_SERVICES_DATA) {
            continue;
    }

This means that only EfiBootServicesData or EfiRuntimeServicesData
regions are considered, or any other region type provided that it
has the EFI_MEMORY_RUNTIME attribute set.

Given what the name of the function implies, and the fact that any
physical address can be described in the UEFI memory map only a single
time, it does not make sense to impose this condition in the body of the
loop, but instead, should be imposed by the caller depending on the value
that is returned to it.

Two such callers exist at the moment:

- The BGRT code when running on x86, via efi_mem_reserve() and
  efi_arch_mem_reserve(). In this case, the region is already known to
  be EfiBootServicesData, and so the check is redundant.

- The ESRT handling code which introduced this function, which calls it
  both directly from efi_esrt_init() and again via efi_mem_reserve() and
  efi_arch_mem_reserve() [on x86].

So let's move this check into the callers instead. This preserves the
current behavior both for BGRT and ESRT handling, and allows the lookup
routine to be reused by other [upcoming] users that don't have this
limitation.

In the ESRT case, keep the entire condition, so that platforms that
deviate from the UEFI spec and use something other than
EfiBootServicesData for the ESRT table will keep working as before.

For x86's efi_arch_mem_reserve() implementation, limit the type to
EfiBootServicesData, since it is the only type the reservation code
expects to operate on in the first place.

While we're at it, drop the __init annotation so that drivers can use it
as well.
Tested-by: default avatarLaszlo Ersek <lersek@redhat.com>
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-8-ard.biesheuvel@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      7e1550b8
    • Ard Biesheuvel's avatar
      efi/libstub/arm: Add opt-in Kconfig option for the DTB loader · 3d7ee348
      Ard Biesheuvel authored 
      There are various ways a platform can provide a device tree binary
to the kernel, with different levels of sophistication:

- ideally, the UEFI firmware, which is tightly coupled with the
  platform, provides a device tree image directly as a UEFI
  configuration table, and typically permits the contents to be
  manipulated either via menu options or via UEFI environment
  variables that specify a replacement image,

- GRUB for ARM has a 'devicetree' directive which allows a device
  tree image to be loaded from any location accessible to GRUB, and
  supersede the one provided by the firmware,

- the EFI stub implements a dtb= command line option that allows a
  device tree image to be loaded from a file residing in the same
  file system as the one the kernel image was loaded from.

The dtb= command line option was never intended to be more than a
development feature, to allow the other options to be implemented
in parallel. So let's make it an opt-in feature that is disabled
by default, but can be re-enabled at will.

Note that we already disable the dtb= command line option when we
detect that we are running with UEFI Secure Boot enabled.
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: default avatarAlexander Graf <agraf@suse.de>
Acked-by: default avatarLeif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-7-ard.biesheuvel@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      3d7ee348
    • Sai Praneeth's avatar
      efi: Remove the declaration of efi_late_init() as the function is unused · f5dcc214
      Sai Praneeth authored 
      The following commit:

  7b0a9114 ("efi/x86: Move the EFI BGRT init code to early init code")

... removed the implementation and all the references to
efi_late_init() but the function is still declared at
include/linux/efi.h.

Hence, remove the unnecessary declaration.
Signed-off-by: default avatarSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-6-ard.biesheuvel@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      f5dcc214
    • Arnd Bergmann's avatar
      efi/cper: Avoid using get_seconds() · 7bb49709
      Arnd Bergmann authored 
      get_seconds() is deprecated because of the 32-bit time overflow
in y2038/y2106 on 32-bit architectures. The way it is used in
cper_next_record_id() causes an overflow in 2106 when unsigned UTC
seconds overflow, even on 64-bit architectures.

This starts using ktime_get_real_seconds() to give us more than 32 bits
of timestamp on all architectures, and then changes the algorithm to use
39 bits for the timestamp after the y2038 wrap date, plus an always-1
bit at the top. This gives us another 127 epochs of 136 years, with
strictly monotonically increasing sequence numbers across boots.

This is almost certainly overkill, but seems better than just extending
the deadline from 2038 to 2106.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-5-ard.biesheuvel@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      7bb49709
    • Sai Praneeth's avatar
      efi: Use a work queue to invoke EFI Runtime Services · 3eb420e7
      Sai Praneeth authored 
      Presently, when a user process requests the kernel to execute any
UEFI runtime service, the kernel temporarily switches to a separate
set of page tables that describe the virtual mapping of the UEFI
runtime services regions in memory. Since UEFI runtime services are
typically invoked with interrupts enabled, any code that may be called
during this time, will have an incorrect view of the process's address
space. Although it is unusual for code running in interrupt context to
make assumptions about the process context it runs in, there are cases
(such as the perf subsystem taking samples) where this causes problems.

So let's set up a work queue for calling UEFI runtime services, so that
the actual calls are made when the work queue items are dispatched by a
work queue worker running in a separate kernel thread. Such threads are
not expected to have userland mappings in the first place, and so the
additional mappings created for the UEFI runtime services can never
clash with any.

The ResetSystem() runtime service is not covered by the work queue
handling, since it is not expected to return, and may be called at a
time when the kernel is torn down to the point where we cannot expect
work queues to still be operational.

The non-blocking variants of SetVariable() and QueryVariableInfo()
are also excluded: these are intended to be used from atomic context,
which obviously rules out waiting for a completion to be signalled by
another thread. Note that these variants are currently only used for
UEFI runtime services calls that occur very early in the boot, and
for ones that occur in critical conditions, e.g., to flush kernel logs
to UEFI variables via efi-pstore.
Suggested-by: default avatarAndy Lutomirski <luto@kernel.org>
Signed-off-by: default avatarSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
[ardb: exclude ResetSystem() from the workqueue treatment
       merge from 2 separate patches and rewrite commit log]
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      3eb420e7
    • Sai Praneeth's avatar
      efi/x86: Use non-blocking SetVariable() for efi_delete_dummy_variable() · 5a58bc1b
      Sai Praneeth authored 
      Presently, efi_delete_dummy_variable() uses set_variable() which might
block, which the scheduler is rightfully upset about when used from
the idle thread, producing this splat:

  "bad: scheduling from the idle thread!"

So, make efi_delete_dummy_variable() use set_variable_nonblocking(),
which, as the name suggests, doesn't block.
Signed-off-by: default avatarSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-3-ard.biesheuvel@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      5a58bc1b
    • Ingo Molnar's avatar
      efi/x86: Clean up the eboot code · 90a2186b
      Ingo Molnar authored 
      Various small cleanups:

 - Standardize printk messages:

     'alloc' => 'allocate'
     'mem'   => 'memory'

   also put variable names in printk messages between quotes.

 - Align mass-assignments vertically for better readability

 - Break multi-line function prototypes at the name where possible,
   not in the middle of the parameter list

 - Use a newline before return statements consistently.

 - Use curly braces in a balanced fashion.

 - Remove stray newlines.

No change in functionality.
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-2-ard.biesheuvel@linaro.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      90a2186b
    • Linus Torvalds's avatar
      Linux 4.18-rc5 · 9d3cce1e
      Linus Torvalds authored
      9d3cce1e
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 41b55d23
      Linus Torvalds authored 
      Pull ARM SoC fixes from Olof Johansson:

 - A fix for OMAP5 and DRA7 to make the branch predictor hardening
   settings take proper effect on secondary cores

 - Disable USB OTG on am3517 since current driver isn't working

 - Fix thermal sensor register settings on Armada 38x

 - Fix suspend/resume IRQs on pxa3xx

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: am3517.dtsi:  Disable reference to OMAP3 OTG controller
  ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
  ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
  ARM: dts: armada-38x: use the new thermal binding
      41b55d23
  3. 14 Jul, 2018 19 commits
  5. 13 Jul, 2018 12 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7