- 05 Dec, 2018 2 commits
-
-
Hugh Dickins authored
commit 173d9d9f upstream. Huge tmpfs stress testing has occasionally hit shmem_undo_range()'s VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page). Move the setting of mapping and index up before the page_ref_unfreeze() in __split_huge_page_tail() to fix this: so that a page cache lookup cannot get a reference while the tail's mapping and index are unstable. In fact, might as well move them up before the smp_wmb(): I don't see an actual need for that, but if I'm missing something, this way round is safer than the other, and no less efficient. You might argue that VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page) is misplaced, and should be left until after the trylock_page(); but left as is has not crashed since, and gives more stringent assurance. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261516380.2275@eggly.anvils Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Requires: 605ca5ed ("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hugh Dickins authored
commit 906f9cdf upstream. The term "freeze" is used in several ways in the kernel, and in mm it has the particular meaning of forcing page refcount temporarily to 0. freeze_page() is just too confusing a name for a function that unmaps a page: rename it unmap_page(), and rename unfreeze_page() remap_page(). Went to change the mention of freeze_page() added later in mm/rmap.c, but found it to be incorrect: ordinary page reclaim reaches there too; but the substance of the comment still seems correct, so edit it down. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261514080.2275@eggly.anvils Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Signed-off-by:
-
- 01 Dec, 2018 38 commits
-
-
Greg Kroah-Hartman authored
-
Hugues Fruchet authored
commit a8f438c6 upstream. When switching from auto to manual mode, V4L2 core is calling g_volatile_ctrl() in manual mode in order to get the manual initial value. Remove the manual mode check/return to not break this behaviour. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Tested-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hugues Fruchet authored
commit c2c3f42d upstream. ov5640_set_mode_exposure_calc() is checking binning value but binning value read is buggy, fix this. Rename ov5640_binning_on() to ov5640_get_binning() as per other similar functions. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Hugues Fruchet authored
commit 3cca8ef5 upstream. Ensure that auto gain and auto exposure are well restored when changing mode. Signed-off-by:
-
Hugues Fruchet authored
commit dc29a1c1 upstream. Symptom was black image when capturing HD or 5Mp picture due to manual exposure set to 1 while it was intended to set autoexposure to "manual", fix this. Fixes: bf4a4b51 ("media: ov5640: Don't force the auto exposure state at start time"). Signed-off-by:
-
Jacopo Mondi authored
commit bad1774e upstream. As of: commit 476dec01 ("media: ov5640: Add horizontal and vertical totals") the timings parameters gets programmed separately from the static register values array. When changing capture mode, the vertical and horizontal totals gets inspected by the set_mode_exposure_calc() functions, and only later programmed with the new values. This means exposure, light banding filter and shutter gain are calculated using the previous timings, and are thus not correct. Fix this by programming timings right after the static register value table has been sent to the sensor in the ov5640_load_regs() function. Fixes: 476dec01 ("media: ov5640: Add horizontal and vertical totals") Tested-by: Steve Longerbeam <slongerbeam@gmail.com> # i.MX6q SabreSD, CSI-2 Tested-by: Loic Poulain <loic.poulain@linaro.org> # Dragonboard-410c, CSI-2 Signed-off-by:
Samuel Bobrowicz <sam@elite-embedded.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Jacopo Mondi authored
commit aa4bb8b8 upstream. Rework the MIPI interface startup sequence with the following changes: - Remove MIPI bus initialization from the initial settings blob - At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous mode. - At s_stream time enable/disable the MIPI interface output. - Restore default settings at set_power(0) time. Before this commit the sensor MIPI interface was initialized with settings that require a start/stop sequence at power-up time in order to force lanes into LP11 state, as they were initialized in LP00 when in 'sleep mode', which is assumed to be the sensor manual definition for the D-PHY defined stop mode. The stream start/stop was performed by enabling disabling clock gating, and had the side effect to change the lanes sleep mode configuration when stream was stopped. Clock gating/ungating: - ret = ov5640_mod_reg(sensor, OV5640_REG_MIPI_CTRL00, BIT(5), - on ? 0 : BIT(5)); - if (ret) Set lanes in LP11 when in 'sleep mode': - ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, - on ? 0x00 : 0x70); This commit fixes an issue reported by Jagan Teki on i.MX6 platforms that prevents the host interface from powering up correctly: https://lkml.org/lkml/2018/6/1/38 It also improves MIPI capture operations stability on my testing platform where MIPI capture often failed and returned all-purple frames. Fixes: f22996db ("media: ov5640: add support of DVP parallel interface") Tested-by: Steve Longerbeam <slongerbeam@gmail.com> (i.MX6q SabreSD, CSI-2) Tested-by: Loic Poulain <loic.poulain@linaro.org> (Dragonboard-410c, CSI-2) Reported-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Paul E. McKenney authored
commit 92aa39e9 upstream. The per-CPU rcu_dynticks.rcu_urgent_qs variable communicates an urgent need for an RCU quiescent state from the force-quiescent-state processing within the grace-period kthread to context switches and to cond_resched(). Unfortunately, such urgent needs are not communicated to need_resched(), which is sometimes used to decide when to invoke cond_resched(), for but one example, within the KVM vcpu_run() function. As of v4.15, this can result in synchronize_sched() being delayed by up to ten seconds, which can be problematic, to say nothing of annoying. This commit therefore checks rcu_dynticks.rcu_urgent_qs from within rcu_check_callbacks(), which is invoked from the scheduling-clock interrupt handler. If the current task is not an idle task and is not executing in usermode, a context switch is forced, and either way, the rcu_dynticks.rcu_urgent_qs variable is set to false. If the current task is an idle task, then RCU's dyntick-idle code will detect the quiescent state, so no further action is required. Similarly, if the task is executing in usermode, other code in rcu_check_callbacks() and its called functions will report the corresponding quiescent state. Reported-by:
Marius Hillenbrand <mhillenb@amazon.de> Reported-by:
David Woodhouse <dwmw2@infradead.org> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Backported to make patch apply cleanly on older versions. ] Tested-by:
-
Andreas Gruenbacher authored
commit c26b5aa8 upstream. GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to gfs2_iomap_end in iomap->private. It sets that private pointer in gfs2_iomap_get. Users of gfs2_iomap_get other than gfs2_iomap_begin would have to release iomap->private, but this isn't done correctly, leading to a leak of buffer head references. To fix this, move the code for setting iomap->private from gfs2_iomap_get to gfs2_iomap_begin. Fixes: 64bc06bb ("gfs2: iomap buffered write support") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit b97b3d9f upstream. If we are not echoing the data to userspace or the console is in icanon mode, then perhaps it is a "secret" so we should wipe it once we are done with it. This mirrors the logic that the audit code has. Reported-by:
aszlig <aszlig@nix.build> Tested-by:
Milan Broz <gmazyland@gmail.com> Tested-by:
Daniel Zatovic <daniel.zatovic@gmail.com> Tested-by:
-
Linus Torvalds authored
commit c9a8e5fc upstream. After we are done with the tty buffer, zero it out. Reported-by:
-
Sebastien Boisvert authored
commit 4d54954a upstream. Tracing the event "fs_dax:dax_pmd_insert_mapping" with perf produces this warning: [fs_dax:dax_pmd_insert_mapping] unknown op '~' It is printed in process_op (tools/lib/traceevent/event-parse.c) because '~' is parsed as a binary operator. perf reads the format of fs_dax:dax_pmd_insert_mapping ("print fmt") from /sys/kernel/debug/tracing/events/fs_dax/dax_pmd_insert_mapping/format . The format contains: ~(((u64) ~(~(((1UL) << 12)-1))) ^ \ interpreted as a binary operator by process_op(). This part is generated in the declaration of the event class dax_pmd_insert_mapping_class in include/trace/events/fs_dax.h : __print_flags_u64(__entry->pfn_val & PFN_FLAGS_MASK, "|", PFN_FLAGS_TRACE), This patch adds a pair of parentheses in the declaration of PFN_FLAGS_MASK to make sure that '~' is parsed as a unary operator by perf. The part of the format that was problematic is now: ~(((u64) (~(~(((1UL) << 12)-1)))) Now, all the '~' are parsed as unary operators. Link: http://lkml.kernel.org/r/20181021145939.8760-1-sebhtml@videotron.qc.caSigned-off-by:
Sebastien Boisvert <sebhtml@videotron.qc.ca> Acked-by:
Dan Williams <dan.j.williams@intel.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Elenie Godzaridis <arangradient@gmail.com> Cc: <stable@vger.kerenl.org> Signed-off-by:
-
Matthew Wilcox authored
commit 25bbe21b upstream. After calling get_unlocked_entry(), you have to call put_unlocked_entry() to avoid subsequent waiters losing wakeups. Fixes: c2a7d2a1 ("filesystem-dax: Introduce dax_lock_mapping_entry()") Cc: stable@vger.kernel.org Signed-off-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Michal Hocko authored
[ Upstream commit c63ae43b ] Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by:
Kyungtae Kim <kt0755@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Byoungyoung Lee <lifeasageek@gmail.com> Cc: "Dae R. Jeong" <threeearcat@gmail.com> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 1a413646 ] Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by:
Yufen Yu <yuyufen@huawei.com> Reviewed-by:
-
Michal Hocko authored
[ Upstream commit 9d789999 ] Page state checks are racy. Under a heavy memory workload (e.g. stress -m 200 -t 2h) it is quite easy to hit a race window when the page is allocated but its state is not fully populated yet. A debugging patch to dump the struct page state shows has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0 page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1 flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked) Note that the state has been checked for both PageLRU and PageSwapBacked already. Closing this race completely would require some sort of retry logic. This can be tricky and error prone (think of potential endless or long taking loops). Workaround this problem for movable zones at least. Such a zone should only contain movable pages. Commit 15c30bc0 ("mm, memory_hotplug: make has_unmovable_pages more robust") has told us that this is not strictly true though. Bootmem pages should be marked reserved though so we can move the original check after the PageReserved check. Pages from other zones are still prone to races but we even do not pretend that memory hotremove works for those so pre-mature failure doesn't hurt that much. Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org Fixes: 15c30bc0 ("mm, memory_hotplug: make has_unmovable_pages more robust") Signed-off-by:
Baoquan He <bhe@redhat.com> Tested-by:
Oscar Salvador <osalvador@suse.de> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Vitaly Wool authored
[ Upstream commit ca0246bb ] Reclaim and free can race on an object which is basically fine but in order for reclaim to be able to map "freed" object we need to encode object length in the handle. handle_to_chunks() is then introduced to extract object length from a handle and use it during mapping. Moreover, to avoid racing on a z3fold "headless" page release, we should not try to free that page in z3fold_free() if the reclaim bit is set. Also, in the unlikely case of trying to reclaim a page being freed, we should not proceed with that page. While at it, fix the page accounting in reclaim function. This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups". Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.comSigned-off-by:
Vitaly Wool <vitaly.vul@sony.com> Signed-off-by:
Jongseok Kim <ks77sj@gmail.com> Reported-by-by:
Snild Dolkow <snild@sony.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 33412b86 ] Commit: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Satheesh Rajendran authored
[ Upstream commit 437ccdc8 ] When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e39d8a18 ] If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is being unmounted, then we can Oops when releasing the inode in nfs4_callback_getattr() and nfs4_callback_recall(). Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit c2b94c72 ] gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Philip Yang authored
[ Upstream commit c837243f ] The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Olof Johansson authored
[ Upstream commit ef3a6140 ] Fixes: arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:23:27: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:104:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:146:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:190:60: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:214:24: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:236:23: note: format string is defined here Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Palmer Dabbelt <palmer@sifive.com> Signed-off-by:
-
David Abdurachmanov authored
[ Upstream commit f157d411 ] Building kernel 4.20 for Fedora as RPM fails, because riscv is missing vdso_install target in arch/riscv/Makefile. Signed-off-by:
David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e3d5e573 ] Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit ca474b73 ] We need to copy the io priority, too; otherwise the clone will run with a different priority than the original one. Fixes: 43b62ce3 ("block: move bio io prio to a new field") Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixed up subject, and ordered stores. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Kan Liang authored
[ Upstream commit c10a8de0 ] KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake. Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U, H, S processor lines. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Patrick Bellasi authored
[ Upstream commit c469933e ] A ~10% regression has been reported for UnixBench's execl throughput test by Aaron Lu and Ye Xiaolong: https://lkml.org/lkml/2018/10/30/765 That test is pretty simple, it does a "recursive" execve() syscall on the same binary. Starting from the syscall, this sequence is possible: do_execve() do_execveat_common() __do_execve_file() sched_exec() select_task_rq_fair() <==| Task already enqueued find_idlest_cpu() find_idlest_group() capacity_spare_wake() <==| Functions not called from cpu_util_wake() | the wakeup path which means we can end up calling cpu_util_wake() not only from the "wakeup path", as its name would suggest. Indeed, the task doing an execve() syscall is already enqueued on the CPU we want to get the cpu_util_wake() for. The estimated utilization for a CPU computed in cpu_util_wake() was written under the assumption that function can be called only from the wakeup path. If instead the task is already enqueued, we end up with a utilization which does not remove the current task's contribution from the estimated utilization of the CPU. This will wrongly assume a reduced spare capacity on the current CPU and increase the chances to migrate the task on execve. The regression is tracked down to: commit d519329f ("sched/fair: Update util_est only on util_avg updates") because in that patch we turn on by default the UTIL_EST sched feature. However, the real issue is introduced by: commit f9be3e59 ("sched/fair: Use util_est in LB and WU paths") Let's fix this by ensuring to always discount the task estimated utilization from the CPU's estimated utilization when the task is also the current one. The same benchmark of the bug report, executed on a dual socket 40 CPUs Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz machine, reports these "Execl Throughput" figures (higher the better): mainline : 48136.5 lps mainline+fix : 55376.5 lps which correspond to a 15% speedup. Moreover, since {cpu_util,capacity_spare}_wake() are not really only used from the wakeup path, let's remove this ambiguity by using a better matching name: {cpu_util,capacity_spare}_without(). Since we are at that, let's also improve the existing documentation. Reported-by:
Aaron Lu <aaron.lu@intel.com> Reported-by:
Ye Xiaolong <xiaolong.ye@intel.com> Tested-by:
Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 43c6494f ] Back in 2006 Ben added some workarounds for a misbehaviour in the Spider IO bridge used on early Cell machines, see commit 014da7ff ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these were made to be generic, ie. not tied specifically to Spider. The code stashes a token in the high bits (59-48) of virtual addresses used for IO (eg. returned from ioremap()). This works fine when using the Hash MMU, but when we're using the Radix MMU the bits used for the token overlap with some of the bits of the virtual address. This is because the maximum virtual address is larger with Radix, up to c00fffffffffffff, and in fact we use that high part of the address range for ioremap(), see RADIX_KERN_IO_START. As it happens the bits that are used overlap with the bits that differentiate an IO address vs a linear map address. If the resulting address lies outside the linear mapping we will crash (see below), if not we just corrupt memory. virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000 Unable to handle kernel paging request for data at address 0xc000000080000014 ... CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000 GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030 ^^^^ ... NIP [c000000000626c5c] .iowrite8+0xec/0x100 LR [c0000000006c992c] .vp_reset+0x2c/0x90 Call Trace: .pci_bus_read_config_dword+0xc4/0x120 (unreliable) .register_virtio_device+0x13c/0x1c0 .virtio_pci_probe+0x148/0x1f0 .local_pci_probe+0x68/0x140 .pci_device_probe+0x164/0x220 .really_probe+0x274/0x3b0 .driver_probe_device+0x80/0x170 .__driver_attach+0x14c/0x150 .bus_for_each_dev+0xb8/0x130 .driver_attach+0x34/0x50 .bus_add_driver+0x178/0x2f0 .driver_register+0x90/0x1a0 .__pci_register_driver+0x6c/0x90 .virtio_pci_driver_init+0x2c/0x40 .do_one_initcall+0x64/0x280 .kernel_init_freeable+0x36c/0x474 .kernel_init+0x24/0x160 .ret_from_kernel_thread+0x58/0x7c This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which enables this code is usually not enabled. It is only enabled when it's selected by PPC_CELL_NATIVE which is only selected by PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order to hit the bug you need to build a big endian kernel, with IBM Cell Blade support enabled, as well as Radix MMU support, and then boot that on Power9 using Radix MMU. Still we can fix the bug, so let's do that. We simply use fewer bits for the token, taking the union of the restrictions on the address from both Hash and Radix, we end up with 8 bits we can use for the token. The only user of the token is iowa_mem_find_bus() which only supports 8 token values, so 8 bits is plenty for that. Fixes: 566ca99a ("powerpc/mm/radix: Add dummy radix_enabled()") Signed-off-by:
-
Jens Axboe authored
[ Upstream commit de7b75d8 ] LKP recently reported a hang at bootup in the floppy code: [ 245.678853] INFO: task mount:580 blocked for more than 120 seconds. [ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1d #1 [ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.682181] mount D 6372 580 1 0x00000004 [ 245.683023] Call Trace: [ 245.683425] __schedule+0x2df/0x570 [ 245.683975] schedule+0x2d/0x80 [ 245.684476] schedule_timeout+0x19d/0x330 [ 245.685090] ? wait_for_common+0xa5/0x170 [ 245.685735] wait_for_common+0xac/0x170 [ 245.686339] ? do_sched_yield+0x90/0x90 [ 245.686935] wait_for_completion+0x12/0x20 [ 245.687571] __floppy_read_block_0+0xfb/0x150 [ 245.688244] ? floppy_resume+0x40/0x40 [ 245.688844] floppy_revalidate+0x20f/0x240 [ 245.689486] check_disk_change+0x43/0x60 [ 245.690087] floppy_open+0x1ea/0x360 [ 245.690653] __blkdev_get+0xb4/0x4d0 [ 245.691212] ? blkdev_get+0x1db/0x370 [ 245.691777] blkdev_get+0x1f3/0x370 [ 245.692351] ? path_put+0x15/0x20 [ 245.692871] ? lookup_bdev+0x4b/0x90 [ 245.693539] blkdev_get_by_path+0x3d/0x80 [ 245.694165] mount_bdev+0x2a/0x190 [ 245.694695] squashfs_mount+0x10/0x20 [ 245.695271] ? squashfs_alloc_inode+0x30/0x30 [ 245.695960] mount_fs+0xf/0x90 [ 245.696451] vfs_kern_mount+0x43/0x130 [ 245.697036] do_mount+0x187/0xc40 [ 245.697563] ? memdup_user+0x28/0x50 [ 245.698124] ksys_mount+0x60/0xc0 [ 245.698639] sys_mount+0x19/0x20 [ 245.699167] do_int80_syscall_32+0x61/0x130 [ 245.699813] entry_INT80_32+0xc7/0xc7 showing that we never complete that read request. The reason is that the completion setup is racy - it initializes the completion event AFTER submitting the IO, which means that the IO could complete before/during the init. If it does, we are passing garbage to complete() and we may sleep forever waiting for the event to occur. Fixes: 7b7b68bb ("floppy: bail out in open() if drive is not responding to block0 read") Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 508a1c4d ] The simd wrapper's skcipher request context structure consists of a single subrequest whose size is taken from the subordinate skcipher. However, in simd_skcipher_init(), the reqsize that is retrieved is not from the subordinate skcipher but from the cryptd request structure, whose size is completely unrelated to the actual wrapped skcipher. Reported-by:
Qian Cai <cai@gmx.us> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Xulin Sun authored
[ Upstream commit 9bde0afb ] pcf2127_i2c_gather_write() allocates memory as local variable for i2c_master_send(), after finishing the master transfer, the allocated memory should be freed. The kmemleak is reported: unreferenced object 0xffff80231e7dba80 (size 64): comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s) hex dump (first 32 bytes): 03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................ 00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P.............. backtrace: [<ffff000008221398>] create_object+0xf8/0x278 [<ffff000008a96264>] kmemleak_alloc+0x74/0xa0 [<ffff00000821070c>] __kmalloc+0x1ac/0x348 [<ffff0000087ed1dc>] pcf2127_i2c_gather_write+0x54/0xf8 [<ffff0000085fd9d4>] _regmap_raw_write+0x464/0x850 [<ffff0000085fe3f4>] regmap_bulk_write+0x1a4/0x348 [<ffff0000087ed32c>] pcf2127_rtc_set_time+0xac/0xe8 [<ffff0000087eaad8>] rtc_set_time+0x80/0x138 [<ffff0000087ebfb0>] rtc_dev_ioctl+0x398/0x610 [<ffff00000823f2c0>] do_vfs_ioctl+0xb0/0x848 [<ffff00000823fae4>] SyS_ioctl+0x8c/0xa8 [<ffff000008083ac0>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Xulin Sun <xulin.sun@windriver.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit fbb974ba ] When there is no IRQ configured for the RTC, the rtc-cmos code does not support alarms, all alarm rtc_ops fail with -EIO / -EINVAL. The rtc-core expects a rtc driver which does not support rtc alarms to not have alarm ops at all. Otherwise the wakealarm sysfs attr will read as empty rather then returning an error, making it impossible for userspace to find out beforehand if alarms are supported. A system without an IRQ for the RTC before this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm [root@localhost ~]# After this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm cat: /sys/class/rtc/rtc0/wakealarm: No such file or directory [root@localhost ~]# This fixes gnome-session + systemd trying to use suspend-then-hibernate, which causes systemd to abort the suspend when writing the RTC alarm fails. BugLink: https://github.com/systemd/systemd/issues/9988Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 6ef28a04 ] Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Scott Wood authored
[ Upstream commit 28c5bcf7 ] TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by <trace/define_trace.h>, so like that #include, they should be outside #ifdef protection. They also need to be #undefed before defining, in case multiple trace headers are included by the same C file. This became the case on book3e after commit cf4a6085 ("powerpc/mm: Add missing tracepoint for tlbie"), leading to the following build error: CC arch/powerpc/kvm/powerpc.o In file included from arch/powerpc/kvm/powerpc.c:51:0: arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined [-Werror] #define TRACE_INCLUDE_PATH . ^ In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0, from arch/powerpc/kvm/powerpc.c:48: ./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of the previous definition #define TRACE_INCLUDE_PATH asm ^ cc1: all warnings being treated as errors Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
YueHaibing authored
[ Upstream commit e34ff8ed ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/hisi_sas/hisi_sas_v1_hw.c: In function 'start_delivery_v1_hw': drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:907:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] drivers/scsi/hisi_sas/hisi_sas_v2_hw.c: In function 'start_delivery_v2_hw': drivers/scsi/hisi_sas/hisi_sas_v2_hw.c:1671:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function 'start_delivery_v3_hw': drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:889:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] It never used since introduction in commit fa222db0 ("scsi: hisi_sas: Don't lock DQ for complete task sending") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit f8d29432 ] The addition of a spinlock in lpfc_debugfs_nodelist_data() introduced a bug that lets us not skip NULL pointers correctly, as noticed by gcc-8: drivers/scsi/lpfc/lpfc_debugfs.c: In function 'lpfc_debugfs_nodelist_data.constprop': drivers/scsi/lpfc/lpfc_debugfs.c:728:13: error: 'nrport' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR) This changes the logic back to what it was, while keeping the added spinlock. Fixes: 9e210178 ("scsi: lpfc: Synchronize access to remoteport via rport") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Masayoshi Mizuma authored
[ Upstream commit af31b04b ] KASAN reports following global out of bounds access while nfit_test is being loaded. The out of bound access happens the following reference to dimm_fail_cmd_flags[dimm]. 'dimm' is over than the index value, NUM_DCR (==5). static int override_return_code(int dimm, unsigned int func, int rc) { if ((1 << func) & dimm_fail_cmd_flags[dimm]) { dimm_fail_cmd_flags[] definition: static unsigned long dimm_fail_cmd_flags[NUM_DCR]; 'dimm' is the return value of get_dimm(), and get_dimm() returns the index of handle[] array. The handle[] has 7 index. Let's use ARRAY_SIZE(handle) as the array size. KASAN report: ================================================================== BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x47bb/0x55b0 [nfit_test] Read of size 8 at addr ffffffffc10cbbe8 by task kworker/u41:0/8 ... Call Trace: dump_stack+0xea/0x1b0 ? dump_stack_print_info.cold.0+0x1b/0x1b ? kmsg_dump_rewind_nolock+0xd9/0xd9 print_address_description+0x65/0x22e ? nfit_test_ctl+0x47bb/0x55b0 [nfit_test] kasan_report.cold.6+0x92/0x1a6 nfit_test_ctl+0x47bb/0x55b0 [nfit_test] ... The buggy address belongs to the variable: dimm_fail_cmd_flags+0x28/0xffffffffffffa440 [nfit_test] ================================================================== Fixes: 39611e83 ("tools/testing/nvdimm: Make DSM failure code injection...") Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
-
