Pull ARM fixes from Russell King:
 "Some small fixes that have been accumulated:

   - Chris Cole noticed that in a SMP environment, the DMA cache
     coherence handling can produce undesirable results in a corner
     case

   - Propagate that fix for ARMv7M as well

   - Fix a false positive with source fortification

   - Fix an uninitialised return that Nathan Jones spotted"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8816/1: dma-mapping: fix potential uninitialized return
  ARM: 8815/1: V7M: align v7m_dma_inv_range() with v7 counterpart
  ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling
  ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE

Pull tracing fix from Steven Rostedt:
 "This is a single commit that fixes a bug in uprobes SDT code due to a
  missing mutex protection"

* tag 'trace-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  Uprobes: Fix kernel oops with delayed_uprobe_remove()

Pull sound fixes from Takashi Iwai:
 "Still more incoming fixes than wished at this stage, but all look like
  small and reasonable fixes.

  In addition to the usual HD-audio and USB-audio quirks for various
  devices, two notable changes are included:

   - a fix for USB-audio UAF at probing a malformed descriptor

   - workarounds for PCM rwsem mutex starvation"

* tag 'sound-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4860G/Z6860G
  ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4660G
  ALSA: hda/realtek - Add support for Acer Aspire C24-860 headset mic
  ALSA: hda/realtek: ALC286 mic and headset-mode fixups for Acer Aspire U27-880
  ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.c
  ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570
  ALSA: pcm: Fix interval evaluation with openmin/max
  ALSA: hda: Add support for AMD Stoney Ridge
  ALSA: usb-audio: Add SMSL D1 to quirks for native DSD support
  ALSA: pcm: Fix starvation on down_write_nonblock()
  ALSA: pcm: Call snd_pcm_unlink() conditionally at closing

Pull C-SKY fixes from Guo Ren:

 - bugfix for tlb_get_pgd() error

 - update MAINTAINERS file for C-SKY drivers

* tag 'csky-4.20-rc6' of github.com:c-sky/csky-linux:
  csky: bugfix tlb_get_pgd error.
  MAINTAINERS: add maintainer for C-SKY drivers

There could be a race between task exit and probe unregister:

  exit_mm()
  mmput()
  __mmput()                     uprobe_unregister()
  uprobe_clear_state()          put_uprobe()
  delayed_uprobe_remove()       delayed_uprobe_remove()

put_uprobe() is calling delayed_uprobe_remove() without taking
delayed_uprobe_lock and thus the race sometimes results in a
kernel crash. Fix this by taking delayed_uprobe_lock before
calling delayed_uprobe_remove() from put_uprobe().

Detailed crash log can be found at:
  Link: http://lkml.kernel.org/r/000000000000140c370577db5ece@google.com

Link: http://lkml.kernel.org/r/20181205033423.26242-1-ravi.bangoria@linux.ibm.comAcked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: syzbot+cb1fb754b771caca0a88@syzkaller.appspotmail.com
Fixes: 1cc33161 ("uprobes: Support SDT markers having reference count (semaphore)")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull SCSI fixes from James Bottomley:
 "Four obvious bug fixes. The vmw_pscsi is so old that it's amazing
  no-one noticed before now"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Fix a race in sub-channel creation that can cause panic
  scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload
  scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset
  scsi: lpfc: fix block guard enablement on SLI3 adapters

Pull ARC fixes/updates from Vineet Gupta

 - Missing reads{x}()/writes{x}() getting in the way of some drivers [Jose Abreu]

 - Builds defaulting to ARCv2 ISA based configsa [Kevin Hilman]

 - Misc fixes

* tag 'arc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: io.h: Implement reads{x}()/writes{x}()
  ARC: change defconfig defaults to ARCv2
  arc: [devboards] Add support of NFSv3 ACL
  ARC: mm: fix uninitialised signal code in do_page_fault
  ARC: [plat-hsdk] Enable DW APB GPIO support
  ARCv2: boot log unaligned access in use
  ARC: IOC: panic if kernel was started with previously enabled IOC
  ARC: remove redundant 'default n' from Kconfig

This is a full revert of ac5b2c18 ("mm: thp: relax __GFP_THISNODE for
MADV_HUGEPAGE mappings") and a partial revert of 89c83fb5 ("mm, thp:
consolidate THP gfp handling into alloc_hugepage_direct_gfpmask").

By not setting __GFP_THISNODE, applications can allocate remote hugepages
when the local node is fragmented or low on memory when either the thp
defrag setting is "always" or the vma has been madvised with
MADV_HUGEPAGE.

Remote access to hugepages often has much higher latency than local pages
of the native page size.  On Haswell, ac5b2c18 was shown to have a
13.9% access regression after this commit for binaries that remap their
text segment to be backed by transparent hugepages.

The intent of ac5b2c18 is to address an issue where a local node is
low on memory or fragmented such that a hugepage cannot be allocated.  In
every scenario where this was described as a fix, there is abundant and
unfragmented remote memory available to allocate from, even with a greater
access latency.

If remote memory is also low or fragmented, not setting __GFP_THISNODE was
also measured on Haswell to have a 40% regression in allocation latency.

Restore __GFP_THISNODE for thp allocations.

Fixes: ac5b2c18 ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings")
Fixes: 89c83fb5 ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask")
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "A bit earlier in the week as usual, but there's a fix here that should
  go in sooner rather than later.

  Under a combination of circumstance, the direct issue path in blk-mq
  could corrupt data. This wasn't easy to hit, but the ones that are
  affected by it, seem to hit it pretty easily. Full explanation in the
  patch. None of the regular filesystem and storage testing has
  triggered it, even though it's been around since 4.19-rc1.

  Outside of that, whitelist trim tweak for certain Samsung devices for
  libata"

* tag 'for-linus-20181205' of git://git.kernel.dk/linux-block:
  blk-mq: fix corruption with direct issue
  libata: whitelist all SAMSUNG MZ7KM* solid-state disks

Pull btrfs fix from David Sterba:
 "A patch in 4.19 introduced a sanity check that was too strict and a
  filesystem cannot be mounted.

  This happens for filesystems with more than 10 devices and has been
  reported by a few users so we need the fix to propagate to stable"

* tag 'for-4.20-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: tree-checker: Don't check max block group size as current max chunk size limit is unreliable

Pull power management fix from Rafael Wysocki:
 "Revert a problematic recent commit that attempted to fix a system-wide
  suspend issue related to the freezer"

* tag 'pm-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "exec: make de_thread() freezable"

Pull mfd bugfix from Lee Jones:
 "Replace release function in cros_ec_dev"

* tag 'mfd-fixes-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  Revert "mfd: cros_ec: Use devm_kzalloc for private data"

Acer AIO Veriton Z4860G/Z6860G with the same ALC286 codec has issues
with the input from external microphone. The issue can be fixed by
the fixup ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE for Veriton Z4660G.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Acer AIO Veriton Z4660G with ALC286 codec has issue with the input
from external microphones connecting via 'Front Mic' jack. The fixup
ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE enables the jack sensing of
the headset and fix the audio input issue of external microphone.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The Acer AIO Aspire C24-860 with ALC286 can't detect the headset
microphone. Just like another Acer AIO U27-880, it needs a different
pin value for 0x18 and the headset fixup to make headset mic work.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Acer Aspire U27-880(AIO) with ALC286 codec can not detect headset mic
and internal mic not working either. It needs the similar quirk like
Sony laptops to fix headphone jack sensing and enables use of the
internal microphone.

Unfortunately jack sensing for the headset mic is still not working.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 3aa2177e.

That commit triggered a new WARN when unloading the module (see at the
end of the commit message). When a class_dev is embedded in a structure
then that class_dev is the thing that controls the lifetime of that
structure, for that reason device managed allocations can't be used here.
See Documentation/kobject.txt.

Revert the above patch, so the struct is allocated using kzalloc and we
have a release function for it that frees the allocated memory, otherwise
it is broken.

 ------------[ cut here ]------------
 Device 'cros_ec' does not have a release() function, it is broken and must be fixed.
 WARNING: CPU: 3 PID: 3675 at drivers/base/core.c:895 device_release+0x80/0x90
 Modules linked in: btusb btrtl btintel btbcm bluetooth ...
 CPU: 3 PID: 3675 Comm: rmmod Not tainted 4.20.0-rc4 #76
 Hardware name: Google Kevin (DT)
 pstate: 40000005 (nZcv daif -PAN -UAO)
 pc : device_release+0x80/0x90
 lr : device_release+0x80/0x90
 sp : ffff00000c47bc70
 x29: ffff00000c47bc70 x28: ffff8000e86b0d40
 x27: 0000000000000000 x26: 0000000000000000
 x25: 0000000056000000 x24: 0000000000000015
 x23: ffff8000f0bbf860 x22: ffff000000d320a0
 x21: ffff8000ee93e100 x20: ffff8000ed931428
 x19: ffff8000ed931418 x18: 0000000000000020
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000400 x14: 0000000000000143
 x13: 0000000000000000 x12: 0000000000000400
 x11: 0000000000000157 x10: 0000000000000960
 x9 : ffff00000c47b9b0 x8 : ffff8000e86b1700
 x7 : 0000000000000000 x6 : ffff8000f7d520b8
 x5 : ffff8000f7d520b8 x4 : 0000000000000000
 x3 : ffff8000f7d58e68 x2 : ffff8000e86b0d40
 x1 : 37d859939c964800 x0 : 0000000000000000
 Call trace:
  device_release+0x80/0x90
  kobject_put+0x74/0xe8
  device_unregister+0x20/0x30
  ec_device_remove+0x34/0x48 [cros_ec_dev]
  platform_drv_remove+0x28/0x48
  device_release_driver_internal+0x1a8/0x240
  driver_detach+0x40/0x80
  bus_remove_driver+0x54/0xa8
  driver_unregister+0x2c/0x58
  platform_driver_unregister+0x10/0x18
  cros_ec_dev_exit+0x1c/0x2d8 [cros_ec_dev]
  __arm64_sys_delete_module+0x16c/0x1f8
  el0_svc_common+0x84/0xd8
  el0_svc_handler+0x2c/0x80
  el0_svc+0x8/0xc
 ---[ end trace a57c4625f3c60ae8 ]---

Cc: stable@vger.kernel.org
Fixes: 3aa2177e ("mfd: cros_ec: Use devm_kzalloc for private data")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

If we attempt a direct issue to a SCSI device, and it returns BUSY, then
we queue the request up normally. However, the SCSI layer may have
already setup SG tables etc for this particular command. If we later
merge with this request, then the old tables are no longer valid. Once
we issue the IO, we only read/write the original part of the request,
not the new state of it.

This causes data corruption, and is most often noticed with the file
system complaining about the just read data being invalid:

[  235.934465] EXT4-fs error (device sda1): ext4_iget:4831: inode #7142: comm dpkg-query: bad extra_isize 24937 (inode size 256)

because most of it is garbage...

This doesn't happen from the normal issue path, as we will simply defer
the request to the hardware queue dispatch list if we fail. Once it's on
the dispatch list, we never merge with it.

Fix this from the direct issue path by flagging the request as
REQ_NOMERGE so we don't change the size of it before issue.

See also:
  https://bugzilla.kernel.org/show_bug.cgi?id=201685Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6ce3dd6e ("blk-mq: issue directly if hw queue isn't busy in case of 'none'")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

While trying to use the dma_mmap_*() interface, it was noticed that this
interface returns strange values when passed an incorrect length.

If neither of the if() statements fire then the return value is
uninitialized. In the worst case it returns 0 which means the caller
will think the function succeeded.

Fixes: 1655cf88 ("ARM: dma-mapping: Remove traces of NOMMU code")
Signed-off-by: Nathan Jones <nathanj439@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Chris has discovered and reported that v7_dma_inv_range() may corrupt
memory if address range is not aligned to cache line size.

Since the whole cache-v7m.S was lifted form cache-v7.S the same
observation applies to v7m_dma_inv_range(). So the fix just mirrors
what has been done for v7 with a little specific of M-class.

Cc: Chris Cole <chris@sageembedded.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

This patch addresses possible memory corruption when
v7_dma_inv_range(start_address, end_address) address parameters are not
aligned to whole cache lines. This function issues "invalidate" cache
management operations to all cache lines from start_address (inclusive)
to end_address (exclusive). When start_address and/or end_address are
not aligned, the start and/or end cache lines are first issued "clean &
invalidate" operation. The assumption is this is done to ensure that any
dirty data addresses outside the address range (but part of the first or
last cache lines) are cleaned/flushed so that data is not lost, which
could happen if just an invalidate is issued.

The problem is that these first/last partial cache lines are issued
"clean & invalidate" and then "invalidate". This second "invalidate" is
not required and worse can cause "lost" writes to addresses outside the
address range but part of the cache line. If another component writes to
its part of the cache line between the "clean & invalidate" and
"invalidate" operations, the write can get lost. This fix is to remove
the extra "invalidate" operation when unaligned addressed are used.

A kernel module is available that has a stress test to reproduce the
issue and a unit test of the updated v7_dma_inv_range(). It can be
downloaded from
http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz.

v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction)
when the direction is DMA_FROM_DEVICE. One can (I believe) successfully
argue that DMA from a device to main memory should use buffers aligned
to cache line size, because the "clean & invalidate" might overwrite
data that the device just wrote using DMA. But if a driver does use
unaligned buffers, at least this fix will prevent memory corruption
outside the buffer.
Signed-off-by: Chris Cole <chris@sageembedded.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Pull parisc fix from Helge Deller:
 "On parisc, use -ffunction-sections compiler option when building
  32-bit kernel modules to avoid sysfs-warnings when loading such
  modules.

  This got broken with kernel v4.18"

* 'parisc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Enable -ffunction-sections for modules on 32-bit kernel

Pull input updates from Dmitry Torokhov:
 "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: omap-keypad - fix keyboard debounce configuration
  Input: xpad - quirk all PDP Xbox One gamepads
  Input: synaptics - enable SMBus for HP 15-ay000
  Input: synaptics - add PNP ID for ThinkPad P50 to SMBus
  Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
  Input: elan_i2c - add support for ELAN0621 touchpad
  Input: hyper-v - fix wakeup from suspend-to-idle
  Input: atkbd - clean up indentation issue
  Input: st1232 - convert to SPDX identifiers
  Input: migor_ts - convert to SPDX identifiers
  Input: dt-bindings - fix a typo in file input-reset.txt
  Input: cros_ec_keyb - fix button/switch capability reports
  Input: elan_i2c - add ELAN0620 to the ACPI table
  Input: matrix_keypad - check for errors from of_get_named_gpio()

Revert commit c2239788 "exec: make de_thread() freezable" as
requested by Ingo Molnar:

"So there's a new regression in v4.20-rc4, my desktop produces this
lockdep splat:

[ 1772.588771] WARNING: pkexec/4633 still has locks held!
[ 1772.588773] 4.20.0-rc4-custom-00213-g93a49841322b #1 Not tainted
[ 1772.588775] ------------------------------------
[ 1772.588776] 1 lock held by pkexec/4633:
[ 1772.588778]  #0: 00000000ed85fbf8 (&sig->cred_guard_mutex){+.+.}, at: prepare_bprm_creds+0x2a/0x70
[ 1772.588786] stack backtrace:
[ 1772.588789] CPU: 7 PID: 4633 Comm: pkexec Not tainted 4.20.0-rc4-custom-00213-g93a49841322b #1
[ 1772.588792] Call Trace:
[ 1772.588800]  dump_stack+0x85/0xcb
[ 1772.588803]  flush_old_exec+0x116/0x890
[ 1772.588807]  ? load_elf_phdrs+0x72/0xb0
[ 1772.588809]  load_elf_binary+0x291/0x1620
[ 1772.588815]  ? sched_clock+0x5/0x10
[ 1772.588817]  ? search_binary_handler+0x6d/0x240
[ 1772.588820]  search_binary_handler+0x80/0x240
[ 1772.588823]  load_script+0x201/0x220
[ 1772.588825]  search_binary_handler+0x80/0x240
[ 1772.588828]  __do_execve_file.isra.32+0x7d2/0xa60
[ 1772.588832]  ? strncpy_from_user+0x40/0x180
[ 1772.588835]  __x64_sys_execve+0x34/0x40
[ 1772.588838]  do_syscall_64+0x60/0x1c0

The warning gets triggered by an ancient lockdep check in the freezer:

(gdb) list *0xffffffff812ece06
0xffffffff812ece06 is in flush_old_exec (./include/linux/freezer.h:57).
52	 * DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION
53	 * If try_to_freeze causes a lockdep warning it means the caller may deadlock
54	 */
55	static inline bool try_to_freeze_unsafe(void)
56	{
57		might_sleep();
58		if (likely(!freezing(current)))
59			return false;
60		return __refrigerator(false);
61	}

I reviewed the ->cred_guard_mutex code, and the mutex is held across all
of exec() - and we always did this.

But there's this recent -rc4 commit:

> Chanho Min (1):
>       exec: make de_thread() freezable

  c2239788: exec: make de_thread() freezable

I believe this commit is bogus, you cannot call try_to_freeze() from
de_thread(), because it's holding the ->cred_guard_mutex."
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[BUG]
A completely valid btrfs will refuse to mount, with error message like:
  BTRFS critical (device sdb2): corrupt leaf: root=2 block=239681536 slot=172 \
    bg_start=12018974720 bg_len=10888413184, invalid block group size, \
    have 10888413184 expect (0, 10737418240]

This has been reported several times as the 4.19 kernel is now being
used. The filesystem refuses to mount, but is otherwise ok and booting
4.18 is a workaround.

Btrfs check returns no error, and all kernels used on this fs is later
than 2011, which should all have the 10G size limit commit.

[CAUSE]
For a 12 devices btrfs, we could allocate a chunk larger than 10G due to
stripe stripe bump up.

__btrfs_alloc_chunk()
|- max_stripe_size = 1G
|- max_chunk_size = 10G
|- data_stripe = 11
|- if (1G * 11 > 10G) {
       stripe_size = 976128930;
       stripe_size = round_up(976128930, SZ_16M) = 989855744

However the final stripe_size (989855744) * 11 = 10888413184, which is
still larger than 10G.

[FIX]
For the comprehensive check, we need to do the full check at chunk read
time, and rely on bg <-> chunk mapping to do the check.

We could just skip the length check for now.

Fixes: fce466ea ("btrfs: tree-checker: Verify block_group_item")
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

These devices support read zero after trim (RZAT), as they advertise to
the OS. However, the OS doesn't believe the SSDs unless they are
explicitly whitelisted.
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

I noticed that the Android v3.0.8 kernel on droid4 is using different
keypad values from the mainline kernel and does not have issues with
keys occasionally being stuck until pressed again. Turns out there was
an earlier patch posted to fix this as "Input: omap-keypad: errata i689:
Correct debounce time", but it was never reposted to fix use macros
for timing calculations.

This updated version is using macros, and also fixes the use of the
input clock rate to use 32768KiHz instead of 32000KiHz. And we want to
use the known good Android kernel values of 3 and 6 instead of 2 and 6
in the earlier patch.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since we continue to find tons of new variants [0,1,2,3,4,5,6] that
need the PDP quirk, let's just quirk all devices from PDP.

[0]: https://github.com/paroj/xpad/pull/104
[1]: https://github.com/paroj/xpad/pull/105
[2]: https://github.com/paroj/xpad/pull/108
[3]: https://github.com/paroj/xpad/pull/109
[4]: https://github.com/paroj/xpad/pull/112
[5]: https://github.com/paroj/xpad/pull/115
[6]: https://github.com/paroj/xpad/pull/116

Fixes: e5c9c6a8 ("Input: xpad - add support for PDP Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000
series,

This device has been reported in these messages in the "linux-input"
mailing list:
* https://marc.info/?l=linux-input&m=152016683003369&w=2
* https://www.spinics.net/lists/linux-input/msg52525.htmlReported-by: Nitesh Debnath <niteshkd1999@gmail.com>
Reported-by: Teika Kazura <teika@gmx.com>
Signed-off-by: Teika Kazura <teika@gmx.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Noticed the other day the trackpoint felt different on my P50, then
realized it was because rmi4 wasn't loading for this machine
automatically. Suspend/resume, hibernate, and everything else seem to
work perfectly fine on here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.
Signed-off-by: Noah Westervelt <nwestervelt@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.
Signed-off-by: Adam Wong <adam@adamwong.me>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull media fixes from Mauro Carvalho Chehab:

 - Revert a dt-bindings patch whose driver didn't make for 4.20

 - fix a kernel oops at vicodec driver

 - fix a frame overflow at gspca with was causing regressions on some
   cameras, making them to not work

 - use the proper type for wait_queue head

 - make media request API compatible with 32-bit userspace on 64-bit
   kernel

 - fix a regression on Kernel 4.19 at dvb-pll

 - don't use SPDX headers yet for GFDL

* tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: mediactl docs: Fix licensing message
  media: dvb-pll: don't re-validate tuner frequencies
  media: dvb-pll: fix tuner frequency ranges
  media: Revert "media: dt-bindings: Document the Rockchip VPU bindings"
  media: gspca: fix frame overflow error
  media: vicodec: fix memchr() kernel oops
  media: cedrus: add action item to the TODO
  media: media-request: Add compat ioctl
  media: Use wait_queue_head_t for media_request

Pull IDE fixes from David Miller:
 "A missing of_node_put() and a small cleanup"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: Change to use DEFINE_SHOW_ATTRIBUTE macro
  ide: pmac: add of_node_put()

Pull sparc fixes from David Miller:

 1) Some implicit switch fallthrough fixes from Stephen Rothwell.

 2) Missing of_node_put() in various sparc drivers from Yangtao Li.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  drivers/tty: add missing of_node_put()
  drivers/sbus/char: add of_node_put()
  sbus: char: add of_node_put()
  sparc32: supress another implicit-fallthrough warning
  sparc32: suppress an implicit-fallthrough warning
  sparc: suppress the implicit-fallthrough warning
  arch/sparc: Use kzalloc_node

If a USB sound card reports 0 interfaces, an error condition is triggered
and the function usb_audio_probe errors out. In the error path, there was a
use-after-free vulnerability where the memory object of the card was first
freed, followed by a decrement of the number of active chips. Moving the
decrement above the atomic_dec fixes the UAF.

[ The original problem was introduced in 3.1 kernel, while it was
  developed in a different form.  The Fixes tag below indicates the
  original commit but it doesn't mean that the patch is applicable
  cleanly. -- tiwai ]

Fixes: 362e4e49 ("ALSA: usb-audio - clear chip->probing on error exit")
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

We've got a regression report for some Thinkpad models (at least
T570s) which shows the too low speaker output volume.  The bisection
leaded to the commit 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad
Dock device for ALC298 platform"), and it's basically adding the two
pin configurations for the dock, and looks harmless.

The real culprit seems, though, that the DAC assignment for the
speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14
to be coupled with DAC NID 0x03.  When more pins are configured by the
commit above, the auto-parser changes the DAC assignment, and this
resulted in the regression.

As a workaround, just provide the fixed pin / DAC mapping table for
this Thinkpad fixup function.  It's no generic solution, but the
problem itself is pretty much device-specific, so must be good
enough.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304
Fixes: 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

use of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place is not doing this, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>