- 04 Jul, 2014 19 commits
-
-
Anthony DeStefano authored
Define jpeg_dqt as static. Signed-off-by:
Anthony DeStefano <adx@fastmail.fm> Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
During the media summit meeting in Edinburgh it was decided to move this driver to staging as the first step to removing it altogether. Most webcams covered by this driver are now supported by gspca. Nobody has the hardware or is willing to convert the remaining devices to gspca. This driver needs a major overhaul to have it conform to the latest frameworks and compliancy tests. Without hardware, however, this is next to impossible. Given the fact that this driver seems to be pretty much unused (it has been removed from Fedora several versions ago and nobody complained about that), we decided to drop this driver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Carpenter authored
The CX18_ALSA_DBGFLG_WARN is cut and pasted twice and we can delete the second instance. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ovidiu Toader authored
This minor patch fixes all WARNING:SPACING style warnings in rtl2832_sdr.c The new version of the file pleases checkpatch.pl when run with "--ignore LONG_LINE". Signed-off-by:
Ovidiu Toader <ovi@phas.ubc.ca> Acked-by:
Antti Palosaari <crope@iki.fi> Reviewed-by:
-
Paul Bolle authored
A check for CONFIG_DM644X_VIDEO_PORT_ENABLE was added in v2.6.32. The related Kconfig symbol was never added so this check has always evaluated to false. Remove that check. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Anthony DeStefano authored
rtl2832_sdr.c: fixup checkpatch issues about long lines Aligned stuff under the ( for this version. Signed-off-by:
-
Alexey Khoroshilov authored
Error handling code in poseidon_probe() misses usb_put_intf() and usb_put_dev(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hans Verkuil authored
know -> known Signed-off-by:
-
Pranith Kumar authored
kerneltrap.org no longer works, update to a working reference Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> Acked-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Rickard Strandqvist authored
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Peter Senna Tschudin authored
This patch remove variables that are initialized with a constant, are never updated, and are only used as parameter of return. Return the constant instead of using a variable. Verified by compilation only. The coccinelle script that find and fixes this issue is: // <smpl> @@ type T; constant C; identifier ret; @@ - T ret = C; ... when != ret when strict return - ret + C ; // </smpl> Signed-off-by:Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Peter Senna Tschudin authored
This patch remove variables that are initialized with a constant, are never updated, and are only used as parameter of return. Return the constant instead of using a variable. Verified by compilation only. The coccinelle script that find and fixes this issue is: // <smpl> @@ type T; constant C; identifier ret; @@ - T ret = C; ... when != ret when strict return - ret + C ; // </smpl> Signed-off-by: -
Hans Verkuil authored
Add support for the MSI Digivox Trio device. Signed-off-by:
P. van Gaans <w3ird_n3rd@gmx.net> Signed-off-by:
-
Benoit Taine authored
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by:
Benoit Taine <benoit.taine@lip6.fr> Signed-off-by:
-
Alan authored
Add static to tda m_* variables in the header. They don't need to be global. With some cleanup they could probably even be marked const. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=68191Reported-by:
Christian Schneider <christian@ch-sc.de> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alexander Bersenev authored
This patch adds driver for sunxi IR controller. It is based on Alexsey Shestacov's work based on the original driver supplied by Allwinner. Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
Alexsey Shestacov <wingrime@linux-sunxi.org> [hdegoede@redhat.com: Changed compatible to sun4i-a10-ir] Signed-off-by:
-
Alexander Bersenev authored
This patch adds documentation for Device-Tree bindings for sunxi IR controller. Signed-off-by:
-
Antonio Ospite authored
Add support for the depth stream at 10bpp, for now use a 'depth_mode' command line parameter to switch between video and depth mode. Signed-off-by:
Alexander Sosna <alexander@xxor.de> Signed-off-by:
Antonio Ospite <ao2@ao2.it> Signed-off-by:
-
Antonio Ospite authored
Currently gspca selects the first ISOC input endpoint as the input transfer endpoint, however some devices can provide streams on endpoints different then the first one, so some subdrivers (e.g. gspca_kinect) may want to select a specific endpoint to use as a transfer endpoint. Add an xfer_ep field to struct gspca_dev, and change alt_xfer() so that it accepts a parameter which represents a specific endpoint address to look for. If a subdriver wants to specify a value for gspca_dev->xfer_ep it can do that in its sd_config() callback. Signed-off-by:
-
- 26 Jun, 2014 1 commit
-
-
CrazyCat authored
Fix stream curruption on high bitrate (>60mbit). Signed-off-by:
Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by:
-
- 19 Jun, 2014 9 commits
-
-
Mauro Carvalho Chehab authored
While this device doesn't have a scaler (or have it disabled), the screen dimentions are a function of the standard. Ok, right now, only 480 lines standards are implemented, although it supports other ones. Yet, let's calculate the size, to make easier to add more standards latter. Signed-off-by: -
Mauro Carvalho Chehab authored
It seems that there's a bug at au0828 hardware/firmware related to alternate setting: when the device is already at alt 5, a further call causes the URBs to receive -ESHUTDOWN. I found two different encarnations of this issue: 1) at qv4l2, it fails the second time we try to open the video screen; 2) at xawtv, when audio underrun occurs, with is very frequent, at least on my test machine. The fix is simple: just check if alt=5 before calling set_usb_interface(). Cc: stable@vger.kernel.org Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
There are several issues on the current code: 1) msleep(1) is actually equivalent to msleep(10); 2) au8522_video_set() will set reg 0xa4 to the proper value for SIF, CVBS or S-Video. No need to force it to CVBS; 3) Let's not hardcode 0x9d for CBS on audio_set. Signed-off-by: -
Mauro Carvalho Chehab authored
setup_decoder_defaults() doesn't really care about the input port. All it needs to know is if the input port is s-video or not. As the caller function already knows that, just pass a boolean instead. Signed-off-by: -
Mauro Carvalho Chehab authored
Let's set the the audio routing also at stream start. With this change, we don't risk enabling the analog demux while not streaming, reducing the risk of interfering with a DVB demux that might be happening. Signed-off-by: -
Mauro Carvalho Chehab authored
The same demod is used on both analog and digital mode. We should not let the commands for analog mode to happen while the device is in digital mode. So, monitor it via streamon. Signed-off-by: -
Mauro Carvalho Chehab authored
The input mode is used not only inside the setup_decoder_defaults() but also at au8522_*_mode routines. So, move it one level up. As an advantage, we can now group the function that sets the input into just one. Signed-off-by: -
Mauro Carvalho Chehab authored
The analog part of au0828 is missing the tuner Kconfig dependency. That makes the device to not work while in analog mode. Signed-off-by:
-
- 17 Jun, 2014 11 commits
-
-
James Hogan authored
Add the basic GPLv2+ license notice to the copyright headers at the top of all the source files in the img-ir driver. Reported-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Jean Delvare authored
The sh_mobile_ceu_camera and sh_mobile_csi2 drivers are only useful on SuperH and shmobile unless build testing. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Alexander Shiyan authored
This patch change MACH_MX27 dependency to SOC_IMX27 for MX2 camera driver, since MACH_MX27 symbol is scheduled for removal. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Alexander Shiyan authored
That driver hasn't been really maintained for a long time. It doesn't compile in any way, it includes non-existent headers, has no users, and marked as "BROKEN" more than year. Due to these factors, mx1_camera is now removed from the tree. Signed-off-by:
-
Jean Delvare authored
The R-Car Video Input driver is only useful on shmobile unless build testing. Signed-off-by:
-
Ben Dooks authored
The platform data is a single word, so simply copy it into the device's private data structure than keeping a copy of the pointer. This will make changing to device-tree binding easier as it is one allocation instead of two. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
Guennadi Liakhovetski authored
devm_kzalloc() allocations are freed when the device is unbound. But if a certain path fails and the allocated memory cannot be used anyway it is better to free it explicitly immediately. This patch does exactly this if asynchronous group probing in scan_async_group() fails after memory has been allocated. Signed-off-by:
-
Mauro Carvalho Chehab authored
Calibrate the signal strength to dB. For this callibration, I used adapter 0 (antenna 1), connected via a normal cable to a DTF-2111 generator. The same cabling and RF generator connected to adapter 1 (antenna 2) has a difference of +3dBm (signal was stronger there). Yet, changing the RF for a difference of, let's say, 6dB reflected on a 6dB difference at the measured signal, with is good. So, the signal strengh can indeed be used to measure the antenna gain, if the antenna is repositioned. It is not precise to measure the absolute dBm value, however. Signed-off-by: -
Mauro Carvalho Chehab authored
Adds DVBv5 stats support. For now, just mimic whatever dib8000 does, as they're very similar, with regards to statistics. However, dib7000p_get_time_us() likely require some adjustments, as I didn't actually reviewed the formula for it to work with DVB-T. Still, better than nothing, as latter patches can improve it. This patch also doesn't show the signal strength in dB yet. The code is already there, but it requires to be callibrated. A latter patch will do the calibration. It seems that this patch is also a bug fix: Before this patch, the frontend were not tuning with some userspace tools. I suspect that dib7000p firmware or hardware internally expects that the statistics to be collected, in order for it to work. With this patch, the DVB core will always retrive statistics, even if userspace doesn't request. So, it makes the device work on all tested apps. Signed-off-by: -
Mauro Carvalho Chehab authored
Exporting multiple symbols don't work as it causes compilation breakages, due to the way dvb_attach() works. The bug happens when: CONFIG_DVB_DIB8000=m CONFIG_DVB_USB_DIB0700=y As a bonus, dib8000 won't be loaded anymore if the device uses a different frontend, reducing the memory footprint. Tested with both Pixelview PV-D231 and MyGica S870. Signed-off-by: -
Mauro Carvalho Chehab authored
Well, what we call as "foo_attach" is the method that should be called by the dvb_attach() macro. It should be noticed that the name "dvb_attach" is really a bad name and don't express what it does. dvb_attach() basically does three things, if the frontend is compiled as a module: - It lookups for the module that it is known to have the given symbol name and requests such module; - It increments the module usage (anonymously - so lsmod doesn't print who loaded the module); - after loading the module, it runs the function associated with the dynamic symbol. When compiled as builtin, it just calls the function given to it. As dvb_attach() increments refcount, it can't be (easily) called more than once for the same module, or the kernel will deny to remove the module, because refcount will never be zeroed. In other words, the function name given to dvb_attach() should be one single symbol that will always be called before any other function on that module to be used. For almost all DVB frontends, there's just one function, but, on dib8000, there are several exported symbols. We need to get rid of all those direct calls, because they cause compilation breakages when bridge is builtin and frontend is module, we'll need to add a new function that will be the first one to be called, whatever initialization is needed. So, let's rename this function, in order to prepare for a next patch that will add a new attach() function that will be the only one exported by this module. Signed-off-by:
-
