Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name. Also, use ME4000_AI_STATUS_REG instead of ME4000_AI_CTRL_REG
when reading the register (they happen to be the same).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the helper function to check the range type instead of relying on the
value. For aesthetics, rename the local variable used for the range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The chanspec channel, range, and aref are unsigned int values. Use the
correct types when extracting them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The coemdi (*insn_read) functions are supposed to read insn->n values
from the hardware. Make this function work like the core expects.

Use the comedi_offset_munge() helper to munge the two's complement
values to offset binary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_timeout() helper to busy-wait for the analog input end-of-
conversion instead of the udelay().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() macro to define the bits of this register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function so it has namespace associated with the driver.

The last entry of the chanlist needs the ME4000_AI_LIST_LAST_ENTRY bit
set to end the list. Fix the function and tidy if up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_lrange table for the analog inputs is inverted compared
to the values that need to be written to the ME4000_AI_CHANNEL_LIST_REG
to select the range.

Create a macro, ME4000_AI_LIST_RANGE(), to handle the inversion. Remove
the old defines and simplify the code a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define evaluates to 0 and is OR'ed with the 'entry' value that is
written to the ME4000_AI_CHANNEL_LIST_REG when the channel aref is a
single-ended type (AREF_GROUND or AREF_COMMON). OR'ing a zero value is
pretty silly, just remove it.

Remove the switch() in me4000_ai_insn_read() to simplify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In comedi drivers the local variable used for the dev->private pointer is
normally named 'devpriv'. For aesthetics, rename the variables in this
driver. Also, rename the struct to follow the norm.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the boards supported by this driver can do analog input sample &
hold on 8 of the channels. The 'ai_sh_nchan' member of the boardinfo is
used to indicate which boards support this feature. To save a bit of space,
convert this member to a bit-field, 'can_do_sh_ai'. Note, this feature is
not currently supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is always '4' for the boards that have an
analog output FIFO. Covert it to a bit-field, 'has_ao_fifo', to save a
bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For the boards that have analog output capability, there are always
4 analog output channels. Convert the 'ao_nchan' member of the boardinfo
into a bit-field, 'has_ao', to save a bit of space and set the analog
output subdevice 'n_chan' to 4 when supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is only used as a flag indicating that the
board supports differential analog inputs. Convert the member to a bit-
field to save a bit of space. For aesthetics, rename the member to
'can_do_diff_ai'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the boardinfo 'has_counter' and 'ai_trig_analog' flags into
bit-fields to save a bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The maximum differential channel is half the subdevice 'n_chan'. Use
that instead and remove the need for the 'board' variable.

Also, the comedi core does no validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'board' pointer is only used in this function to verify that the
'chan' is valid for an aref of AREF_DIFF. For differential inputs, the
maximum channel is half the subdevice 'n_chan'. Use that instead and
remove the 'board' variable.

Also, the comedi core does not validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core validates that the 'chan' is valid for the subdevice
before calling the (*insn_read) operation. Remove the unnecessary check.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the boards supported by this driver do not have differential analog
inputs. Only set the SDF_DIFF subdev_flag when the board supports it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have analog inputs. They just
differ in the number of channels (32 or 16).

Always initialize the analog input subdevice in me4000_auto_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have 32 digital I/O channels.
Remove the unnecessary boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Globals are initialized to zero or NULL by GCC. No need to explicitly initialize them.
Signed-off-by: Daniel Machon <dmachon.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
Signed-off-by: Miguel Bernabeu Diaz <miguelbernadi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch uses kasprintf which combines kzalloc and sprintf.
kasprintf also takes care of the size calculation.

Semantic patch used is as follows:

@@
expression a,flag;
expression list args;
statement S;
@@

 a =
- \(kmalloc\|kzalloc\)(...,flag)
+ kasprintf (flag,args)
  <... when != a
  if (a == NULL || ...) S
  ...>
- sprintf(a,args);
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

 This patch does away with the cast on void * as it is unnecessary.

Semantic patch used is as follows:

@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch does away with the cast on void * as it is unnecessary.

Semantic patch used is as follows:

@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch does away with the cast on void * as it is unnecessary.

Semantic patch used is as follows:

@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Switch the visornic over to use napi.  Currently there is a kernel
thread that sits and waits on a wait queue to get notified of incoming
virtual interrupts. It would be nice if we could handle frame reception
using the standard napi processing instead.  This patch creates our napi
instance and has the rx thread schedule it

Given that the unisys hypervisor currently requires that queue servicing
be done by a polling loop that wakes up every 2ms, lets instead also
convert that to a timer, which is simpler, and allows us to remove all
the thread starting and stopping code.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The character ' ' is removed after the character '('.  This fixes the
checkpatch.pl error - "space prohibited after that open
parenthesis '('".
Signed-off-by: Chandra S Gorentla <csgorentla@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added 'void' keyword in the paranthesis of function definitions, when
there are no arguments to the functions.  This fixes the checkpatch.pl
error - "Bad function definition 'function()' should probably be
function(void)".
Signed-off-by: Chandra S Gorentla <csgorentla@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding styles issues with braces.
Signed-off-by: Daniel Machon <dmachon.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Linux kernel coding style guidelines suggest not using typedefs for
structure and enum types. This patch gets rid of the typedefs for
Ack_session_info_t.

The following Coccinelle semantic patch detects the cases for struct type:

@tn@
identifier i;
type td;
@@

-typedef
 struct i { ... }
-td
 ;

@@
type tn.td;
identifier tn.i;
@@

-td
+ struct i
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixing indentation errors in
drivers/staging/iio/iio_simple_dummy_events.c.
Signed-off-by: Lars Svensson <lars1.svensson@sonymobile.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>