Requested by Daniel.

v2: Fix incorrect num_pipe settings. (Chris)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The index variable points at a page table, not a page directory or a
pde. Ben Widawsky fix this up correctly in his ppgtt cleanup, but I've
botched the job and copy&pasted the old confusion from the original
gen6 ppgtt code in

commit def886c3
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 24 14:44:56 2013 -0800

    drm/i915: vfuncs for ppgtt
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Port C is for eDP.  Port B is shared between HDMI and DP.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We'll re-enable select bits as needed after testing and power measurement.

v2: split out wake handling bits (Jani)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Can prevent a hang when we get to tessellation.  We need to set bit 15
as well for this workaround.

v2: update changelog with accurate info
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This fixes up broken logic introduced in

commit 90b107c8
Author: Shobhit Kumar <shobhit.kumar@intel.com>
Date:   Wed Mar 28 13:39:32 2012 -0700

    drm/i915: Enable HDMI on ValleyView

That one was probably a rebase fail along the way.

v2: clean up init ordering (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Pimp commit message a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We could split this out into a separate routine at some point as an
optimization.

v2: use FORCEWAKE_KERNEL (Ville)

Note: Ville mentioned in his review that he declines to be responsible
if this blows up due to the lack of "readback a register != FW_ACK,
but from the same cacheline" magic we have in other forcewake
implementations.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Bikeshed overtly long lines according to checkpatch.pl. Nope,
this time around I didn't screw up printk message since I've left
those alone.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Planes are fixed to pipes in VLV.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

It fixes the issue arises due to passing 'nr_pages' in place of 'nents' to
sg_alloc_table. When ARM_HAS_SG_CHAIN is disabled, it is causing failure in
creating SG table for the buffers having more than 204 physical pages i.e.
equal to SG_MAX_SINGLE_ALLOC.

When using sg_alloc_table_from_pages interface, in place of sg_alloc_table,
page list will be passes to get each contiguous section which is represented
by a single entry in the table. For a Contiguous Buffer, number of entries
should be equal to 1.

Following check is causing the failure which is not applicable for Non-Contig
buffers:

	if (WARN_ON_ONCE(nents > max_ents))
		return -EINVAL;

Above patch is well tested for EXYNOS4 and EXYNOS5 for with/wihtout IOMMU
supprot. NOUVEAU and RADEON platforms also depends on drm_prime_pages_to_sg
helper function.

This set is base on "exynos-drm-fixes" branch at
http://git.kernel.org/?p=linux/kernel/git/daeinki/drm-exynos.gitSigned-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The existing gtt setup code is correct - and so doesn't need to be fixed to
handle compact dma scatter lists similarly to the previous patches. Still,
take the for_each_sg_page macro into use, to get somewhat simpler code.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So far we created a sparse dma scatter list for gem objects, where each
scatter list entry represented only a single page. In the future we'll
have to handle compact scatter lists too where each entry can consist of
multiple pages, for example for objects imported through PRIME.

The previous patches have already fixed up all other places where the
i915 driver _walked_ these lists. Here we have the corresponding fix to
_create_ compact lists. It's not a performance or memory footprint
improvement, but it helps to better exercise the new logic.

Reference: http://www.spinics.net/lists/dri-devel/msg33917.htmlSigned-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So far the assumption was that each dma scatter list entry contains only
a single page. This might not hold in the future, when we'll introduce
compact scatter lists, so prepare for this everywhere in the i915 code
where we walk such a list.

We'll fix the place _creating_ these lists separately in the next patch
to help the reviewing/bisectability.

Reference: http://www.spinics.net/lists/dri-devel/msg33917.htmlSigned-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This is needed since currently sg_for_each_page assumes that we have
a valid page in each sg item. It is only a real problem for
CONFIG_SPARSEMEM where the page is dereferenced, in other cases the
iterator works ok with an invalid page pointer.

We can remove this workaround when we have fixed sg_page_iter to work on
scatterlists without backing pages.
Signed-off-by: Imre Deak <imre.deak@intel.com>

So far the assumption was that each scatter list entry contains a single
page. This might not hold in the future, when we'll introduce compact
scatter lists, so prepare for this here.

Reference: http://www.spinics.net/lists/dri-devel/msg33917.htmlSigned-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Backmerge so that I can merge Imre Deak's coalesced sg entries fixes,
which depend upon the new for_each_sg_page introduce in

commit a321e91b
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Feb 27 17:02:56 2013 -0800

    lib/scatterlist: add simple page iterator

The merge itself is just two trivial conflicts:
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We need to set the 'allow force wake' bit to enable forcewake handling
later on.

v2: split from clock gating patch (Jani)
    check for allowwakeack (Ville)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:

	arch/x86/power/built-in.o: In function `restore_processor_state':
	(.text+0x45c): undefined reference to `perf_restore_debug_store'

Fix it by defining the dummy function appropriately.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.
Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Once we thought we got semaphores working, we disabled kicking the ring
if hangcheck fired whilst waiting upon a ring as it was doing more harm
than good:

commit 4e0e90dc
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Dec 14 13:56:58 2011 +0100

    drm/i915: kicking rings stuck on semaphores considered harmful

However, life is never that easy and semaphores are still causing
problems whereby the value written by one ring (bcs) is not being
propagated to the waiter (rcs). Thus the waiter never wakes up and we
declare the GPU hung, which often has unfortunate consequences, even if
we successfully reset the GPU.

But the GPU is idle as it has completed the work, just didn't notify its
clients. So we can detect the incomplete wait during hang check and
probe the target ring to see if has indeed emitted the breadcrumb seqno
following the work and then and only then kick the waiter.

Based on a suggestion by Ben Widawsky.

v2: cross-check wait with iphdr. fix signaller calculation.

References: https://bugs.freedesktop.org/show_bug.cgi?id=54226Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

To avoid this:
[  256.798060] [drm] capturing error event; look for more information
in/sys/kernel/debug/dri/0/i915_error_state

Ben Widawsky identified that this regression has been introduced in

commit 2f86f191
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Mon Jan 28 15:32:15 2013 -0800

    drm/i915: Error state should print /sys/kernel/debug
        ...
    [danvet: split up long line.] <----- he did it
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Pimp commit message with the regression note. Also, order
more brown paper bags, I've run out.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Because the register does not exist on LPT. The interesting fact is
that reading/writing PCH_LVDS on LPT does *not* give us "unclaimed
register" messages, but the register value is always 0.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Now it returns false for all platforms unless they're explicitly
listed on the function. There should be no real difference, except for
the fact that it now returns false on Haswell.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We're starting to add many IS_HASWELL checks for the power well code,
so add a HAS_POWER_WELL macro to properly document that we're checking
for hardware that has the power down well.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Resolve conflicts since some converted code was added by
not-yet merged patches.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So don't read it when we hang the GPU. This solves "unclaimed
register" messages.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Future-proof by adding a gen >= 7 check in addition to the
!IS_HSW check from Paulo's original patch, suggested by Ben.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So don't read it when capturing the error state. This solves some
"unclaimed register" messages on Haswell when we hang the GPU.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This solves some "unclaimed register" messages when there's a GPU hang
on Haswell.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add missing IS_VLV check as spotted by Ville Syrjälä.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Our mode set sequence documentation says audio must be disabled first.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Resolve conflict since the first patch in this series isn't
applied yet. Also bikeshed commit message as suggested by Ben.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull btrfs fixes from Chris Mason:
 "Eric's rcu barrier patch fixes a long standing problem with our
  unmount code hanging on to devices in workqueue helpers.  Liu Bo
  nailed down a difficult assertion for in-memory extent mappings."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix warning of free_extent_map
  Btrfs: fix warning when creating snapshots
  Btrfs: return as soon as possible when edquot happens
  Btrfs: return EIO if we have extent tree corruption
  btrfs: use rcu_barrier() to wait for bdev puts at unmount
  Btrfs: remove btrfs_try_spin_lock
  Btrfs: get better concurrency for snapshot-aware defrag work

Users report that an extent map's list is still linked when it's actually
going to be freed from cache.

The story is that

a) when we're going to drop an extent map and may split this large one into
smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means
that it's on the list to be logged, then the smaller ems split from it will also
be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected.

b) we'll keep ems from unlinking the list and freeing when they are flagged with
EXTENT_FLAG_LOGGING, because the log code holds one reference.

The end result is the warning, but the truth is that we set the flag
EXTENT_FLAG_LOGGING only during fsync.

So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one.
Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Pull kbuild fix from Michal Marek:
 "One fix for for make headers_install/headers_check to not require make
  3.81.  The requirement has been accidentally introduced in 3.7."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: fix make headers_check with make 3.80

Pull OpenRISC bug fixes from Jonas Bonn:

 - The GPIO descriptor work has exposed how broken the non-GPIOLIB bits
   for OpenRISC were.  We now require GPIOLIB as this is the preferred
   way forward.

 - The system.h split introduced a bug in llist.h for arches using
   asm-generic/cmpxchg.h directly, which is currently only OpenRISC.
   The patch here moves two defines from asm-generic/atomic.h to
   asm-generic/cmpxchg.h to make things work as they should.

 - The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does
   not have the virt_to_bus methods, so there's a patch to remove it
   again.

* tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux:
  openrisc: remove HAVE_VIRT_TO_BUS
  asm-generic: move cmpxchg*_local defs to cmpxchg.h
  openrisc: require gpiolib

Pull char/misc fixes from Greg Kroah-Hartman:
 "Here are some tiny fixes for the w1 drivers and the final removal
  patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now
  gone from your tree, this just drops the Kconfig item itself.)

  All have been in the linux-next tree for a while"

* tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  final removal of CONFIG_EXPERIMENTAL
  w1: fix oops when w1_search is called from netlink connector
  w1-gpio: fix unused variable warning
  w1-gpio: remove erroneous __exit and __exit_p()
  ARM: w1-gpio: fix erroneous gpio requests

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes, as expected for the middle rc:
   - A couple of fixes for potential NULL dereferences and out-of-range
     array accesses revealed by static code parsers
   - A fix for the wrong error handling detected by trinity
   - A regression fix for missing audio on some MacBooks
   - CA0132 DSP loader fixes
   - Fix for EAPD control of IDT codecs on machines w/o speaker
   - Fix a regression in the HD-audio widget list parser code
   - Workaround for the NuForce UDH-100 USB audio"

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
  sound: sequencer: cap array index in seq_chn_common_event()
  ALSA: hda/ca0132 - Remove extra setting of dsp_state.
  ALSA: hda/ca0132 - Check download state of DSP.
  ALSA: hda/ca0132 - Check if dspload_image succeeded.
  ALSA: hda - Disable IDT eapd_switch if there are no internal speakers
  ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value
  ALSA: usb-audio: add a workaround for the NuForce UDH-100
  ALSA: asihpi - fix potential NULL pointer dereference
  ALSA: seq: Fix missing error handling in snd_seq_timer_open()

Pull DMA-mapping fix from Marek Szyprowski:
 "An important fix for all ARM architectures which use ZONE_DMA.
  Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated
  buffers outsize DMA zone."

* 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation