- 29 Aug, 2013 7 commits
-
-
Lespiau, Damien authored
HDMI 1.4 adds 4 "4k x 2k" modes in the the CEA vendor specific block. With this commit, we now parse this block and expose the 4k modes that we find there. v2: Fix the "4096x2160" string (nice catch!), add comments about do_hdmi_vsdb_modes() arguments and make it clearer that offset is relative to the end of the required fields of the HDMI VSDB (Ville Syrjälä) v3: Fix 'Unknow' typo (Simon Farnsworth) Signed-off-by:Damien Lespiau <damien.lespiau@intel.com> Tested-by:
Cancan Feng <cancan.feng@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030Reviewed-by:
Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Dave Airlie <airlied@gmail.com>
-
Lespiau, Damien authored
A few styles issues have crept in here, fix them before touching this code again. v2: constify arguments that can be (Ville Syrjälä) v3: constify, but better (Ville Syrjälä) Signed-off-by:
-
Lespiau, Damien authored
This function is only used inside drm_edid.c. Signed-off-by:
-
Dave Airlie authored
This hooks nouveau up to the runtime PM system to enable dynamic power management for secondary GPUs in switchable and optimus laptops. a) rewrite suspend/resume printks to hide them during dynamic s/r to avoid cluttering logs b) add runtime pm suspend to irq handler, crtc display, ioctl handler, connector status, c) handle hdmi audio dynamic power on/off using magic register. v0.5: make sure we hit D3 properly fix fbdev_set_suspend locking interaction, we only will poweroff if we have no active crtcs/fbcon anyways. add reference for active crtcs. sprinkle mark last busy for autosuspend timeout v0.6: allow more flexible debugging - to avoid log spam add option to enable/disable dynpm got to D3Cold v0.7: add hdmi audio support. v0.8: call autosuspend from idle, so pci config space access doesn't go straight back to sleep, this makes starting X faster. only signal usage if we actually handle the irq, otherwise usb keeps us awake. fix nv50 display active powerdown v0.9: use masking function to enable hdmi audio set busy when we fail to suspend Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Signed-off-by: -
Dave Airlie authored
Add support for HDMI audio device on VGA cards that powerdown to D3cold using non-standard ACPI/PCI infrastructure (optimus). This does a couple of things to make it work: a) add a set of power ops for the hdmi domain, and enables them via vga_switcheroo when we are a switcheroo controlled card. This just replaces the runtime resume operation so that when the card is in D3cold the userspace pci config space access via sysfs, the vga switcheroon runtime resume gets called first and it calls the GPU resume callback before calling the sound card runtime resume. b) standard ACPI/PCI stacks won't put a device into D3cold without an ACPI handle, but since the hdmi audio devices on gpus don't have an ACPI handle, we need to manually force the device into D3cold after suspend from the switcheroo path only. c) don't try and do runtime s/r when the GPU is off. d) call runtime suspend/resume during switcheroo suspend/resume this is to make sure the runtime stack knows to try and resume the hdmi audio device for pci config space access. v2: fix incorrect runtime call suspend->resume. v3: rework irq handler to avoid false irq when we are resuming but haven't runtime resumed yet, don't bother trying D3cold, it won't work, just set it manually ourselves, move runtime s/r calls outside the main s/r hook. enable dnyamic pm properly by dropping reference. v4: put back irq handler check just wrap it with cap check Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dave Airlie authored
For optimus and powerxpress muxless we really want the GPU driver deciding when to power up/down the GPU, not userspace. This adds the ability for a driver to dynamically power up/down the GPU and remove the switcheroo from controlling it, the switcheroo reports the dynamic state to userspace also. It also adds 2 power domains, one for machine where the power switch is controlled outside the GPU D3 state, so the powerdown ordering is done correctly, and the second for the hdmi audio device to make sure it can resume for PCI config space accesses. v1.1: fix build with switcheroo off v2: add power domain support for radeon and v1 nvidia dsms v2.1: fix typo in off case v3: add audio power domain for hdmi audio + misc audio fixes v4: use PCI_SLOT macro, drop power reference on hdmi audio resume failure also. Signed-off-by:
-
- 28 Aug, 2013 1 commit
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Merge the MSM driver from Rob Clark * 'drm-next' of git://people.freedesktop.org/~robclark/linux: drm/msm: add basic hangcheck/recovery mechanism drm/msm: add a3xx gpu support drm/msm: add register definitions for gpu drm/msm: basic KMS driver for snapdragon drm/msm: add register definitions
-
- 27 Aug, 2013 3 commits
-
-
David Herrmann authored
GEM does already a good job in tracking access to gem buffers via handles and drm_vma access management. However, TTM drivers currently do not verify this during mmap(). TTM provides the verify_access() callback to test this. So fix all drivers to actually call into gem+vma to verify access instead of always returning 0. All drivers assume that user-space can only get access to TTM buffers via GEM handles. So whenever the verify_access() callback is called from ttm_bo_mmap(), the buffer must have a valid embedded gem object. This is true for all TTM+GEM drivers. But that's why this patch doesn't touch pure TTM drivers (ie, vmwgfx). v2: Switch to drm_vma_node_verify_access() to correctly return -EACCES if access was denied. Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by:David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
David Herrmann authored
We implement automatic vma mmap() access management for all drivers using gem_mmap. We use the vma manager to add each open-file that creates a gem-handle to the vma-node of the underlying gem object. Once the handle is destroyed, we drop the open-file again. This allows us to use drm_vma_node_is_allowed() on _any_ gem object to see whether an open-file is granted access. In drm_gem_mmap() we use this to verify that unprivileged users cannot guess gem offsets and map arbitrary buffers. Note that this manages access for _all_ gem users (also TTM+GEM), but the actual access checks are only done for drm_gem_mmap(). TTM drivers use the TTM mmap helpers, which need to do that separately. Signed-off-by:
-
David Herrmann authored
The VMA offset manager uses a device-global address-space. Hence, any user can currently map any offset-node they want. They only need to guess the right offset. If we wanted per open-file offset spaces, we'd either need VM_NONLINEAR mappings or multiple "struct address_space" trees. As both doesn't really scale, we implement access management in the VMA manager itself. We use an rb-tree to store open-files for each VMA node. On each mmap call, GEM, TTM or the drivers must check whether the current user is allowed to map this file. We add a separate lock for each node as there is no generic lock available for the caller to protect the node easily. As we currently don't know whether an object may be used for mmap(), we have to do access management for all objects. If it turns out to slow down handle creation/deletion significantly, we can optimize it in several ways: - Most times only a single filp is added per bo so we could use a static "struct file *main_filp" which is checked/added/removed first before we fall back to the rbtree+drm_vma_offset_file. This could be even done lockless with rcu. - Let user-space pass a hint whether mmap() should be supported on the bo and avoid access-management if not. - .. there are probably more ideas once we have benchmarks .. v2: add drm_vma_node_verify_access() helper Signed-off-by:
-
- 24 Aug, 2013 5 commits
-
-
Rob Clark authored
A basic, no-frills recovery mechanism in case the gpu gets wedged. We could try to be a bit more fancy and restart the next submit after the one that got wedged, but for now keep it simple. This is enough to recover things if, for example, the gpu hangs mid way through a piglit run. Signed-off-by:Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Add initial support for a3xx 3d core. So far, with hardware that I've seen to date, we can have: + zero, one, or two z180 2d cores + a3xx or a2xx 3d core, which share a common CP (the firmware for the CP seems to implement some different PM4 packet types but the basics of cmdstream submission are the same) Which means that the eventual complete "class" hierarchy, once support for all past and present hw is in place, becomes: + msm_gpu + adreno_gpu + a3xx_gpu + a2xx_gpu + z180_gpu This commit splits out the parts that will eventually be common between a2xx/a3xx into adreno_gpu, and the parts that are even common to z180 into msm_gpu. Note that there is no cmdstream validation required. All memory access from the GPU is via IOMMU/MMU. So as long as you don't map silly things to the GPU, there isn't much damage that the GPU can do. Signed-off-by: -
Rob Clark authored
Generated from rnndb files in: https://github.com/freedreno/envytools Keep this split out as a separate commit to make it easier to review the actual driver. Signed-off-by:
-
Rob Clark authored
The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: -
Rob Clark authored
Generated from rnndb files in: https://github.com/freedreno/envytools Keep this split out as a separate commit to make it easier to review the actual driver. Signed-off-by:
-
- 22 Aug, 2013 1 commit
-
-
git://github.com/patjak/drm-gma500Dave Airlie authored
Here's some gma500 unifying and cleanups for drm-next. There is more stuff in the pipe for 3.12 but I'd like to get these out of the way first. * 'gma500-next' of git://github.com/patjak/drm-gma500: (35 commits) drm/gma500/cdv: Add and hook up chip op for disabling sr drm/gma500/cdv: Add and hook up chip op for watermarks drm/gma500: Rename psb_intel_encoder to gma_encoder drm/gma500: Rename psb_intel_connector to gma_connector drm/gma500: Rename psb_intel_crtc to gma_crtc drm/gma500/cdv: Convert to generic set_config() drm/gma500/psb: Convert to generic set_config() drm/gma500: Add generic set_config() function drm/gma500/cdv: Convert to generic save/restore drm/gma500/psb: Convert to generic save/restore drm/gma500: Add generic crtc save/restore funcs drm/gma500: Convert to generic encoder funcs drm/gma500: Add generic encoder functions drm/gma500/psb: Convert to generic cursor funcs drm/gma500/cdv: Convert to generic cursor funcs drm/gma500: Add generic cursor functions drm/gma500/psb: Convert to generic crtc->destroy drm/gma500/mdfld: Use identical generic crtc funcs drm/gma500/oak: Use identical generic crtc funcs drm/gma500/psb: Convert to gma_crtc_dpms() ...
-
- 21 Aug, 2013 21 commits
-
-
Daniel Vetter authored
... not only when the dma-buf is freshly created. In contrived examples someone else could have exported/imported the dma-buf already and handed us the gem object with a flink name. If such on object gets reexported as a dma_buf we won't have it in the handle cache already, which breaks the guarantee that for dma-buf imports we always hand back an existing handle if there is one. This is exercised by igt/prime_self_import/with_one_bo_two_files Now if we extend the locked sections just a notch more we can also plug th racy buf/handle cache setup in handle_to_fd: If evil userspace races a concurrent gem close against a prime export operation we can end up tearing down the gem handle before the dma buf handle cache is set up. When handle_to_fd gets around to adding the handle to the cache there will be no one left to clean it up, effectily leaking the bo (and the dma-buf, since the handle cache holds a ref on the dma-buf): Thread A Thread B handle_to_fd: lookup gem object from handle creates new dma_buf gem_close on the same handle obj->dma_buf is set, but file priv buf handle cache has no entry obj->handle_count drops to 0 drm_prime_add_buf_handle sets up the handle cache -> We have a dma-buf reference in the handle cache, but since the handle_count of the gem object already dropped to 0 no on will clean it up. When closing the drm device fd we'll hit the WARN_ON in drm_prime_destroy_file_private. The important change is to extend the critical section of the filp->prime.lock to cover the gem handle lookup. This serializes with a concurrent gem handle close. This leak is exercised by igt/prime_self_import/export-vs-gem_close-race Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
... and move it to the top of the function to avoid a forward declaration. Signed-off-by:
-
Daniel Vetter authored
with the reworking semantics and locking of the obj->dma_buf pointer this pointer is always set as long as there's still a gem handle around and a dma_buf associated with this gem object. Also, the per file-priv lookup-cache for dma-buf importing is also unified between foreign and native objects. Hence we don't need to special case the clean any more and can simply drop the clause which only runs for foreing objects, i.e. with obj->import_attach set. Note that with this change (actually with the previous one to always set up obj->dma_buf even for foreign objects) it is no longer required to set obj->import_attach when importing a foreing object. So update comments accordingly, too. Signed-off-by:
-
Daniel Vetter authored
The export dma-buf cache is semantically similar to an flink name. So semantically it makes sense to treat it the same and remove the name (i.e. the dma_buf pointer) and its references when the last gem handle disappears. Again we need to be careful, but double so: Not just could someone race and export with a gem close ioctl (so we need to recheck obj->handle_count again when assigning the new name), but multiple exports can also race against each another. This is prevented by holding the dev->object_name_lock across the entire section which touches obj->dma_buf. With the new scheme we also need to reinstate the obj->dma_buf link at import time (in case the only reference userspace has held in-between was through the dma-buf fd and not through any native gem handle). For simplicity we don't check whether it's a native object but unconditionally set up that link - with the new scheme of removing the obj->dma_buf reference when the last handle disappears we can do that. To make it clear that this is not just for exported buffers anymore als rename it from export_dma_buf to dma_buf. To make sure that now one can race a fd_to_handle or handle_to_fd with gem_close we use the same tricks as in flink of extending the dev->object_name_locking critical section. With this change we finally have a guaranteed 1:1 relationship (at least for native objects) between gem objects and dma-bufs, even accounting for races (which can happen since the dma-buf itself holds a reference while in-flight). This prevent igt/prime_self_import/export-vs-gem_close-race from Oopsing the kernel. There is still a leak though since the per-file priv dma-buf/handle cache handling is racy. That will be fixed in a later patch. v2: Remove the bogus dma_buf_put from the export_and_register_object failure path if we've raced with the handle count dropping to 0. Signed-off-by:
-
Daniel Vetter authored
The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by:
-
Daniel Vetter authored
I want to wrap the creation of a dma-buf from a gem object in it, so that the obj->export_dma_buf cache can be atomically filled in. Instead of creating a new mutex just for that variable I've figured I can reuse the existing dev->object_name_lock, especially since the new semantics will exactly mirror the flink obj->name already protected by that lock. v2: idr_preload/idr_preload_end is now an atomic section, so need to move the mutex locking outside. [airlied: fix up conflict with patch to make debugfs use lock] Signed-off-by:
-
Daniel Vetter authored
if (!ret) implies that ret == 0, so no need to clear it again. And explicitly check for ret == 0 to indicate that we're checking an errno integer. Signed-off-by:
-
Daniel Vetter authored
When exporting a gem object as a dma-buf the critical section for the per-fd prime lock is just the adding (and in case of errors, removing) of the handle to the per-fd lookup cache. So restrict the critical section to just that part of the function. This simplifies later reordering. Signed-off-by:
-
Daniel Vetter authored
Part of the function uses the properly-typed dmabuf variable, the other an untyped void *buf. Kill the later. Signed-off-by:
-
Daniel Vetter authored
No one outside of drm should use this, the official interfaces are drm_gem_handle_create and drm_gem_handle_delete. The handle refcounting is purely an implementation detail of gem. Signed-off-by:
-
Daniel Vetter authored
handle_unreference only clears up the obj->name and the reference, but would leave a dangling handle in the idr. The right thing to do is to call handle_delete. Signed-off-by:
-
Daniel Vetter authored
This is the 2nd attempt, I've always been a bit dissatisified with the tricky nature of the first one: http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html The issue is that the flink ioctl can race with calling gem_close on the last gem handle. In that case we'll end up with a zero handle count, but an flink name (and it's corresponding reference). Which results in a neat space leak. In my first attempt I've solved this by rechecking the handle count. But fundamentally the issue is that ->handle_count isn't your usual refcount - it can be resurrected from 0 among other things. For those special beasts atomic_t often suggest way more ordering that it actually guarantees. To prevent being tricked by those hairy semantics take the easy way out and simply protect the handle with the existing dev->object_name_lock. With that change implemented it's dead easy to fix the flink vs. gem close reace: When we try to create the name we simply have to check whether there's still officially a gem handle around and if not refuse to create the flink name. Since the handle count decrement and flink name destruction is now also protected by that lock the reace is gone and we can't ever leak the flink reference again. Outside of the drm core only the exynos driver looks at the handle count, and tbh I have no idea why (it's just for debug dmesg output luckily). I've considered inlining the drm_gem_object_handle_free, but I plan to add more name-like things (like the exported dma_buf) to this scheme, so it's clearer to leave the handle freeing in its own function. This is exercised by the new gem_flink_race i-g-t testcase, which on my snb leaks gem objects at a rate of roughly 1k objects/s. v2: Fix up the error path handling in handle_create and make it more robust by simply calling object_handle_unreference. v3: Fix up the handle_unreference logic bug - atomic_dec_and_test retursn 1 for 0. Oops. v4: Squash in inlining of drm_gem_object_handle_reference as suggested by Dave Airlie and add a note that we now have a testcase. Cc: Dave Airlie <airlied@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2013-08-09' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: New pile of stuff for -next: - Cleanup of the old crtc helper callbacks, all encoders are now converted to the i915 modeset infrastructure. - Massive amount of wm patches from Ville for ilk, snb, ivb, hsw, this is prep work to eventually get things going for nuclear pageflips where we need to adjust watermarks on the fly. - More vm/vma patches from Ben. This refactoring isn't yet fully rolled out, we miss the execbuf conversion and some of the low-level bind/unbind support code. - Convert our hdmi infoframe code to use the new common helper functions (Damien). This contains some bugfixes for the common infoframe helpers. - Some cruft removal from Damien. - Various smaller bits&pieces all over, as usual. * tag 'drm-intel-next-2013-08-09' of git://people.freedesktop.org/~danvet/drm-intel: (105 commits) drm/i915: Fix FB WM for HSW drm/i915: expose HDMI connectors on port C on BYT drm/i915: fix a limit check in hsw_compute_wm_results() drm/i915: unbreak i915_gem_object_ggtt_unbind() drm/i915: Make intel_set_mode() static drm/i915: Remove intel_modeset_disable() drm/i915: Make intel_encoder_dpms() static drm/i915: Make i915_hangcheck_elapsed() static drm/i915: Fix #endif comment drm/i915: Remove i915_gem_object_check_coherency() drm/i915: Remove stale prototypes drm/i915: List objects allocated from stolen memory in debugfs drm/i915: Always call intel_update_sprite_watermarks() when disabling a plane drm/i915: Pass plane and crtc to intel_update_sprite_watermarks drm/i915: Don't try to disable plane if it's already disabled drm/i915: Pass crtc to our update/disable_plane hooks drm/i915: Split plane watermark parameters into a separate struct drm/i915: Pull some watermarks state into a separate structure drm/i915: Calculate max watermark levels for ILK+ drm/i915: Rename hsw_lp_wm_result to intel_wm_level ...
-
Lespiau, Damien authored
It's only used in drm_platform.c. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lespiau, Damien authored
Signed-off-by:
-
Lespiau, Damien authored
This function is only used in drm_fb_cma_helper.c. Signed-off-by:
-
Lespiau, Damien authored
These were introduced in the very first DRM commit: commit f453ba04 Author: Dave Airlie <airlied@redhat.com> Date: Fri Nov 7 14:05:41 2008 -0800 DRM: add mode setting support Add mode setting support to the DRM layer. But are unused. Signed-off-by:
-
Lespiau, Damien authored
It's only used in drm_crtc.c. Signed-off-by:
-
Lespiau, Damien authored
The last user was removed in commit 575dc34e Author: Dave Airlie <airlied@redhat.com> Date: Mon Sep 7 18:43:26 2009 +1000 drm/kms: remove old std mode fallback code. The new code adds modes in the helper, which makes more sense I disliked the non-driver code adding modes. Signed-off-by:
-
Lespiau, Damien authored
This was last used by nouveau, replaced by a driver-specific property in: commit de691855 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Oct 17 12:23:41 2011 +1000 drm/nouveau: improve dithering properties, and implement proper auto mode Signed-off-by:
-
Lespiau, Damien authored
A few prototypes have been left in the headers, their function friends long gone. Signed-off-by:
-
- 19 Aug, 2013 2 commits
-
-
Daniel Vetter authored
We kzalloc this structure, and for real kms devices we should never loose track of things really. But ums/legacy drivers rely on the drm core to clean up a bit of cruft between lastclose and firstopen (i.e. when X is being restarted), so keep this around. But give it a clear drm_legacy_ prefix and conditionalize the code on !DRIVER_MODESET. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Daniel Vetter authored
So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12de Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
