- 24 Apr, 2006 7 commits
-
-
Pavel Roskin authored
Sparse is much better at finding endianess issues than such visual cues. Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
Signed-off-by:
-
Pavel Roskin authored
The PCMCIA drivers would never be loaded if the CIS were wrong. No other PCMCIA drivers validate CIS. Signed-off-by:
-
Michael Buesch authored
This patch fixes PIO mode on the softmac bcm43xx driver. (A dscape patch will follow). It mainly fixes endianess issues. This patch is tested on PowerPC32 and i386. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Michael Buesch authored
Signed-off-by: -
Johannes Berg authored
There are some bugs in the current implementation of the SIOCSIWAP wext, for example that when you do it twice and it fails, it may still try another access point for some reason. This patch fixes this by introducing a new flag that tells the association code that the bssid that is in use was fixed by the user and shouldn't be deviated from. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Pavel Roskin authored
The original code was doing arithmetics on a little-endian value. Reported by Stelios Koroneos <stelios@stelioscellar.com> Signed-off-by:
-
- 23 Apr, 2006 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] MAINTAINERS [PARISC] Make ioremap default to _nocache [PARISC] Add new entries to the syscall table [PARISC] Further work for multiple page sizes [PARISC] Fix up hil_kbd.c mismerge [PARISC] defconfig updates [PARISC] Document that we tolerate "Relaxed Ordering" [PARISC] Misc. janitorial work [PARISC] EISA regions must be mapped NO_CACHE [PARISC] OSS ad1889: Match register names with ALSA driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: [PATCH] pcmcia/pcmcia_resource.c: fix crash when using Cardbus cards [PATCH] vrc4171: update config [PATCH] pcmcia: fix oops in static mapping case [PATCH] pcmcia: remove unneeded forward declarations [PATCH] pcmcia: do not set dev_node to NULL too early [PATCH] pcmcia: fix comment for pcmcia_load_firmware [PATCH] pcmcia: unload second device first [PATCH] pcmcia: add new ID to pcnet_cs
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: possible cleanups drm: fixup r300 scratch on BE machines
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable: [CIFS] Fix typo in previous [CIFS] Readdir fixes to allow search to start at arbitrary position [CIFS] Use the kthread_ API instead of opencoding lots of hairy code for kernel [CIFS] Don't allow a backslash in a path component [CIFS] [CIFS] Do not take rename sem on most path based calls (during
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: Fix define_machine so machine_is() works from modules powerpc/ppc: export strncasecmp [PATCH] powerpc: fix oops in alsa powermac driver [PATCH] powerpc: update {g5,iseries,pseries}_defconfigs [PATCH] ppc: Fix powersave code on arch/ppc [PATCH] powerpc/cell: remove BUILD_BUG_ON and add sys_tee to spu_syscall_table [PATCH] powermac: Fix i2c on keywest based chips [PATCH] powerpc: Lower threshold for DART enablement to 1GB [PATCH] powerpc: IOMMU support for honoring dma_mask
-
Dave Airlie authored
This patch contains the following possible cleanups: - make the following needlessly global function static: - drm_bufs.c: drm_addbufs_fb() - remove the following unused EXPORT_SYMBOL's: - drm_agpsupport.c: drm_agp_bind_memory - drm_bufs.c: drm_rmmap_locked - drm_bufs.c: drm_rmmap - drm_stub.c: drm_get_dev Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Dave Airlie <airlied@linux.ie>
-
Dave Airlie authored
This fixes the r300 scratch stuff to work on PPC, from Ben Herrenschmidt on IRC. Signed-off-by: -
Steve French authored
Signed-off-by:Steve French <sfrench@us.ibm.com>
-
Paul Mackerras authored
machine_is() was always returning 0 when used in a module, because we weren't exporting the machine definitions. This was why sound wasn't working on powermacs when CONFIG_SND_POWERMAC=m. Original fix from Ben Herrenschmidt, further fixed by me. Signed-off-by:Paul Mackerras <paulus@samba.org>
-
- 22 Apr, 2006 24 commits
-
-
Kylene Jo Hall authored
I recently found that not all BIOS manufacturers are using the specified generic PNP id in their TPM ACPI table entry. I have added the vendor specific IDs that I know about and added a module parameter that a user can specify another HID to the probe list if their device isn't being found by the default list. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Kylene Jo Hall authored
This patch adds a boolean module parameter that allows the user to turn interrupt support on and off. The default behavior is to attempt to use interrupts. Signed-off-by:
-
Kylene Jo Hall authored
Fixes minor spacing issues. Signed-off-by:
-
Randy Dunlap authored
Use __devexit_p() for the exit/remove function to protect against discarding it. WARNING: drivers/char/tpm/tpm_infineon.o - Section mismatch: reference to .exit.text:tpm_inf_pnp_remove from .data between 'tpm_inf_pnp' (at offset 0x20) and 'tpm_inf' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by:
-
Kylene Jo Hall authored
The acpi table which contains the BIOS log events was updated for 1.2. There are now client and server modes as defined in the specifications with slightly different formats. Additionally, the start field was even too small for the 1.1 version but had been working anyway. This patch updates the code to deal with any of the three types of headers probperly (1.1, 1.2 client and 1.2 server). Signed-off-by:
-
Kylene Jo Hall authored
The memory start and length values obtained from the ACPI entry need to be checked and filled in with the default values from the specification if they don't exist. This patch fills in the default values and uses them appropriately. Signed-off-by:
-
Marcel Selhorst authored
Apply the latest changes in the TPM interface to the Infineon TPM-driver. Signed-off-by:
Marcel Selhorst <selhorst@crypto.rub.de> Acked-by:
-
Kylene Jo Hall authored
Use set_bit() and clear_bit() for dev_mask manipulation. Signed-off-by:
-
Kylene Jo Hall authored
The timeout and duration values used in the tpm driver are not exposed to userspace. This patch converts the storage units to jiffies with msecs_to_jiffies. They were always being used in jiffies so this simplifies things removing the need for calculation all over the place. The change necessitated a type change in the tpm_chip struct to hold jiffies. Signed-off-by:
-
Leendert van Doorn authored
The driver for the next generation of TPM chips version 1.2 including support for interrupts. The Trusted Computing Group has written the TPM Interface Specification (TIS) which defines a common interface for all manufacturer's 1.2 TPM's thus the name tpm_tis. Signed-off-by:
Leendert van Doorn <leendert@watson.ibm.com> Signed-off-by:
-
Kylene Jo Hall authored
Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. This updated version of the patch breaks the multi-value sysfs file into separate files pointed out by Greg. It also addresses the code redundancy and ugliness in the tpm_show_* functions pointed out on another patch by Dave Hansen. Signed-off-by:
-
Kylene Jo Hall authored
With the TPM 1.2 Specification, each command is classified as short, medium or long and the chip tells you the maximum amount of time for a response to each class of command. This patch provides and array of the classifications and a function to determine how long the response should be waited for. Also, it uses that information in the command processing to determine how long to poll for. The function is exported so the 1.2 driver can use the functionality to determine how long to wait for a DataAvailable interrupt if interrupts are being used. Signed-off-by:
-
Kylene Jo Hall authored
Changes in the 1.2 TPM Specification make it necessary to update some fields of the chip structure in the initialization function after it is registered with tpm.c thus tpm_register_hardware was modified to return a pointer to the structure. This patch makes that change and the associated changes in tpm_atmel and tpm_nsc. The changes to tpm_infineon will be coming in a patch from Marcel Selhorst. Signed-off-by:
-
Kylene Jo Hall authored
To assist with chip management and better support the possibility of having multiple TPMs in the system of the same kind, the struct tpm_vendor_specific member of the tpm_chip was changed from a pointer to an instance. This patch changes that declaration and fixes up all accesses to the structure member except in tpm_infineon which is coming in a patch from Marcel Selhorst. Signed-off-by:
-
Kylene Jo Hall authored
Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. Signed-off-by:
-
Kylene Jo Hall authored
The following patch set contains numerous changes to the base tpm driver (tpm.c) to support the next generation of TPM chips. The changes include new sysfs files because of more relevant data being available, a function to access the timeout and duration values for the chip, and changes to make use of those duration values. Duration in the TPM specification is defined as the maximum amount of time the chip could take to return the results. Commands are in one of three categories short, medium and long. Also included are cleanups of how the commands for the sysfs files are composed to reduce a bunch of redundant arrays. This patch: Fix minor spacing issues. Signed-off-by:
-
Kylene Jo Hall authored
A string corresponding to the tcpa_pc_event_id POST_CONTENTS was missing causing an overflow bug when access was attempted in the get_event_name function. This bug was found by Coverity. Signed-off-by:
-
Kylene Jo Hall authored
The eventname was kmalloc'd and not freed in the *_show functions. This bug was found by Coverity. Signed-off-by:
-
Jan Kara authored
reiserfs_cache_default_acl() should return whether we successfully found the acl or not. We have to return correct value even if reiserfs_get_acl() returns error code and not just 0. Otherwise callers such as reiserfs_mkdir() can unnecessarily lock the xattrs and later functions such as reiserfs_new_inode() fail to notice that we have already taken the lock and try to take it again with obvious consequences. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <reiserfs-dev@namesys.com> Signed-off-by:
-
akpm@osdl.org authored
from: Greg Howard <ghoward@sgi.com> Fix Altix system controller (snsc) device names to include the slot number of the blade whose associated system controller is the target of the device interface. Including the slot number avoids a problem we're currently having where slots within the same enclosure are attempting to create multiple kobjects with identical names. Signed-off-by:
Greg Howard <ghoward@sgi.com> Signed-off-by:
-
Mike Waychison authored
We do this by removing a micro-optimization that tries to avoid grabbing the iommu_bitmap_lock spinlock and using a bus-locked operation. This still races with other simultaneous alloc_iommu or free_iommu(size > 1) which both use bus-unlocked operations. The end result of this race is eventually ending up with an iommu_gart_bitmap that has bits errornously set all over, making large contiguous iommu space allocations fail with 'PCI-DMA: Out of IOMMU space'. Signed-off-by:
Mike Waychison <mikew@google.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
This quietens warnings and actually fixes a bug. The unwind tables would come out wrong without -32, causing pthread cancellation during them to crash in the gcc runtime. The problem seems to only happen with newer binutils (it doesn't happen with 2.16.91.0.2 but happens wit 2.16.91.0.5) Thanks to David Altobelli <david.altobelli@hp.com> and Brian Baker <Brian.B@hp.com> for test case and initial analysis. Signed-off-by:
-
Lee Schermerhorn authored
Basic problem: pages of a shared memory segment can only be migrated once. In 2.6.16 through 2.6.17-rc1, shared memory mappings do not have a migratepage address space op. Therefore, migrate_pages() falls back to default processing. In this path, it will try to pageout() dirty pages. Once a shared memory page has been migrated it becomes dirty, so migrate_pages() will try to page it out. However, because the page count is 3 [cache + current + pte], pageout() will return PAGE_KEEP because is_page_cache_freeable() returns false. This will abort all subsequent migrations. This patch adds a migratepage address space op to shared memory segments to avoid taking the default path. We use the "migrate_page()" function because it knows how to migrate dirty pages. This allows shared memory segment pages to migrate, subject to other conditions such as # pte's referencing the page [page_mapcount(page)], when requested. I think this is safe. If we're migrating a shared memory page, then we found the page via a page table, so it must be in memory. Can be verified with memtoy and the shmem-mbind-test script, both available at: http://free.linux.hp.com/~lts/Tools/Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Andy Whitcroft authored
Seems we are trying to init the node_mem_map when we don't need to, for example when SPARSEMEM is enabled. This causes the error below during compilation. Use CONFIG_FLAT_NODE_MEM_MAP to gate allocation and init. arch/x86_64/mm/numa.c: In function `setup_node_zones': arch/x86_64/mm/numa.c:191: error: structure has no member named `node_mem_map' Signed-off-by:Andy Whitcroft <apw@shadowen.org> Acked-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
