- 31 Dec, 2017 4 commits
-
-
Thomas Gleixner authored
Andy prefers to be paranoid about the pagetable free in the error path of write_ldt(). Make it conditional and warn whenever the installment of a secondary LDT fails. Requested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
The error path in write_ldt() tries to free 'old_ldt' instead of the newly allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a half populated LDT pagetable, which is not a leak as it gets cleaned up when the process exits. Free both the potentially half populated LDT pagetable and the newly allocated LDT struct. This can be done unconditionally because once an LDT is mapped subsequent maps will succeed, because the PTE page is already populated and the two LDTs fit into that single page. Reported-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Thomas Gleixner authored
The preempt_disable/enable() pair in __native_flush_tlb() was added in commit: 5cf0791d ("x86/mm: Disable preemption during CR3 read+write") ... to protect the UP variant of flush_tlb_mm_range(). That preempt_disable/enable() pair should have been added to the UP variant of flush_tlb_mm_range() instead. The UP variant was removed with commit: ce4a4e56 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code") ... but the preempt_disable/enable() pair stayed around. The latest change to __native_flush_tlb() in commit: 6fd166aa ("x86/mm: Use/Fix PCID to optimize user/kernel switches") ... added an access to a per CPU variable outside the preempt disabled regions, which makes no sense at all. __native_flush_tlb() must always be called with at least preemption disabled. Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch bad callers independent of the smp_processor_id() debugging. Signed-off-by:
-
Thomas Gleixner authored
smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector() invoke local_flush_tlb() for no obvious reason. Digging in history revealed that the original code in the 2.1 era added those because the code manipulated a swapper_pg_dir pagetable entry. The pagetable manipulation was removed long ago in the 2.3 timeframe, but the TLB flush invocations stayed around forever. Remove them along with the pointless pr_debug()s which come from the same 2.1 change. Reported-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
- 23 Dec, 2017 33 commits
-
-
Thomas Gleixner authored
Now that the LDT mapping is in a known area when PAGE_TABLE_ISOLATION is enabled its a primary target for attacks, if a user space interface fails to validate a write address correctly. That can never happen, right? The SDM states: If the segment descriptors in the GDT or an LDT are placed in ROM, the processor can enter an indefinite loop if software or the processor attempts to update (write to) the ROM-based segment descriptors. To prevent this problem, set the accessed bits for all segment descriptors placed in a ROM. Also, remove operating-system or executive code that attempts to modify segment descriptors located in ROM. So its a valid approach to set the ACCESS bit when setting up the LDT entry and to map the table RO. Fixup the selftest so it can handle that new mode. Remove the manual ACCESS bit setter in set_tls_desc() as this is now pointless. Folded the patch from Peter Ziljstra. Signed-off-by: -
Thomas Gleixner authored
Add two debugfs files which allow to dump the pagetable of the current task. current_kernel dumps the regular page table. This is the page table which is normally shared between kernel and user space. If kernel page table isolation is enabled this is the kernel space mapping. If kernel page table isolation is enabled the second file, current_user, dumps the user space page table. These files allow to verify the resulting page tables for page table isolation, but even in the normal case its useful to be able to inspect user space page tables of current for debugging purposes. Signed-off-by:
-
Thomas Gleixner authored
ptdump_walk_pgd_level_checkwx() checks the kernel page table for WX pages, but does not check the PAGE_TABLE_ISOLATION user space page table. Restructure the code so that dmesg output is selected by an explicit argument and not implicit via checking the pgd argument for !NULL. Add the check for the user space page table. Signed-off-by:
-
Borislav Petkov authored
The upcoming support for dumping the kernel and the user space page tables of the current process would create more random files in the top level debugfs directory. Add a page table directory and move the existing file to it. Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Dave Hansen authored
Finally allow CONFIG_PAGE_TABLE_ISOLATION to be enabled. PARAVIRT generally requires that the kernel not manage its own page tables. It also means that the hypervisor and kernel must agree wholeheartedly about what format the page tables are in and what they contain. PAGE_TABLE_ISOLATION, unfortunately, changes the rules and they can not be used together. I've seen conflicting feedback from maintainers lately about whether they want the Kconfig magic to go first or last in a patch series. It's going last here because the partially-applied series leads to kernels that can not boot in a bunch of cases. I did a run through the entire series with CONFIG_PAGE_TABLE_ISOLATION=y to look for build errors, though. [ tglx: Removed SMP and !PARAVIRT dependencies as they not longer exist ] Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Vlastimil Babka authored
CONFIG_PAGE_TABLE_ISOLATION is relatively new and intrusive feature that may still have some corner cases which could take some time to manifest and be fixed. It would be useful to have Oops messages indicate whether it was enabled for building the kernel, and whether it was disabled during boot. Example of fully enabled: Oops: 0001 [#1] SMP PTI Example of enabled during build, but disabled during boot: Oops: 0001 [#1] SMP NOPTI We can decide to remove this after the feature has been tested in the field long enough. [ tglx: Made it use boot_cpu_has() as requested by Borislav ] Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Eduardo Valentin <eduval@amazon.com> Acked-by:
Dave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: bpetkov@suse.de Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: jkosina@suse.cz Cc: keescook@google.com Signed-off-by:
-
Peter Zijlstra authored
Ideally we'd also use sparse to enforce this separation so it becomes much more difficult to mess up. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Dave Hansen authored
This uses INVPCID to shoot down individual lines of the user mapping instead of marking the entire user map as invalid. This could/might/possibly be faster. This for sure needs tlb_single_page_flush_ceiling to be redetermined; esp. since INVPCID is _slow_. A detailed performance analysis is available here: https://lkml.kernel.org/r/3062e486-3539-8a1f-5724-16199420be71@intel.com [ Peterz: Split out from big combo patch ] Signed-off-by:
-
Peter Zijlstra authored
Most NMI/paranoid exceptions will not in fact change pagetables and would thus not require TLB flushing, however RESTORE_CR3 uses flushing CR3 writes. Restores to kernel PCIDs can be NOFLUSH, because we explicitly flush the kernel mappings and now that we track which user PCIDs need flushing we can avoid those too when possible. This does mean RESTORE_CR3 needs an additional scratch_reg, luckily both sites have plenty available. Signed-off-by:
-
Peter Zijlstra authored
We can use PCID to retain the TLBs across CR3 switches; including those now part of the user/kernel switch. This increases performance of kernel entry/exit at the cost of more expensive/complicated TLB flushing. Now that we have two address spaces, one for kernel and one for user space, we need two PCIDs per mm. We use the top PCID bit to indicate a user PCID (just like we use the PFN LSB for the PGD). Since we do TLB invalidation from kernel space, the existing code will only invalidate the kernel PCID, we augment that by marking the corresponding user PCID invalid, and upon switching back to userspace, use a flushing CR3 write for the switch. In order to access the user_pcid_flush_mask we use PER_CPU storage, which means the previously established SWAPGS vs CR3 ordering is now mandatory and required. Having to do this memory access does require additional registers, most sites have a functioning stack and we can spill one (RAX), sites without functional stack need to otherwise provide the second scratch register. Note: PCID is generally available on Intel Sandybridge and later CPUs. Note: Up until this point TLB flushing was broken in this series. Based-on-code-from: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Dave Hansen authored
In preparation to adding additional PCID flushing, abstract the loading of a new ASID into CR3. [ PeterZ: Split out from big combo patch ] Signed-off-by:
-
Dave Hansen authored
If changing the page tables in such a way that an invalidation of all contexts (aka. PCIDs / ASIDs) is required, they can be actively invalidated by: 1. INVPCID for each PCID (works for single pages too). 2. Load CR3 with each PCID without the NOFLUSH bit set 3. Load CR3 with the NOFLUSH bit set for each and do INVLPG for each address. But, none of these are really feasible since there are ~6 ASIDs (12 with PAGE_TABLE_ISOLATION) at the time that invalidation is required. Instead of actively invalidating them, invalidate the *current* context and also mark the cpu_tlbstate _quickly_ to indicate future invalidation to be required. At the next context-switch, look for this indicator ('invalidate_other' being set) invalidate all of the cpu_tlbstate.ctxs[] entries. This ensures that any future context switches will do a full flush of the TLB, picking up the previous changes. [ tglx: Folded more fixups from Peter ] Signed-off-by: -
Andy Lutomirski authored
Make VSYSCALLs work fully in PTI mode by mapping them properly to the user space visible page tables. [ tglx: Hide unused functions (Patch by Arnd Bergmann) ] Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
With PTI enabled, the LDT must be mapped in the usermode tables somewhere. The LDT is per process, i.e. per mm. An earlier approach mapped the LDT on context switch into a fixmap area, but that's a big overhead and exhausted the fixmap space when NR_CPUS got big. Take advantage of the fact that there is an address space hole which provides a completely unused pgd. Use this pgd to manage per-mm LDT mappings. This has a down side: the LDT isn't (currently) randomized, and an attack that can write the LDT is instant root due to call gates (thanks, AMD, for leaving call gates in AMD64 but designing them wrong so they're only useful for exploits). This can be mitigated by making the LDT read-only or randomizing the mapping, either of which is strightforward on top of this patch. This will significantly slow down LDT users, but that shouldn't matter for important workloads -- the LDT is only used by DOSEMU(2), Wine, and very old libc implementations. [ tglx: Cleaned it up. ] Signed-off-by:
-
Andy Lutomirski authored
Shrink vmalloc space from 16384TiB to 12800TiB to enlarge the hole starting at 0xff90000000000000 to be a full PGD entry. A subsequent patch will use this hole for the pagetable isolation LDT alias. Signed-off-by:
-
Hugh Dickins authored
The BTS and PEBS buffers both have their virtual addresses programmed into the hardware. This means that any access to them is performed via the page tables. The times that the hardware accesses these are entirely dependent on how the performance monitoring hardware events are set up. In other words, there is no way for the kernel to tell when the hardware might access these buffers. To avoid perf crashes, place 'debug_store' allocate pages and map them into the cpu_entry_area. The PEBS fixup buffer does not need this treatment. [ tglx: Got rid of the kaiser_add_mapping() complication ] Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Thomas Gleixner authored
The Intel PEBS/BTS debug store is a design trainwreck as it expects virtual addresses which must be visible in any execution context. So it is required to make these mappings visible to user space when kernel page table isolation is active. Provide enough room for the buffer mappings in the cpu_entry_area so the buffers are available in the user space visible page tables. At the point where the kernel side entry area is populated there is no buffer available yet, but the kernel PMD must be populated. To achieve this set the entries for these buffers to non present. Signed-off-by:
-
Andy Lutomirski authored
Map the ESPFIX pages into user space when PTI is enabled. Signed-off-by:
-
Thomas Gleixner authored
Share the entry text PMD of the kernel mapping with the user space mapping. If large pages are enabled this is a single PMD entry and at the point where it is copied into the user page table the RW bit has not been cleared yet. Clear it right away so the user space visible map becomes RX. Signed-off-by:
-
Thomas Gleixner authored
The (irq)entry text must be visible in the user space page tables. To allow simple PMD based sharing, make the entry text PMD aligned. Signed-off-by:
-
Andy Lutomirski authored
Share the cpu entry area so the user space and kernel space page tables have the same P4D page. Signed-off-by:
-
Thomas Gleixner authored
Force the entry through the trampoline only when PTI is active. Otherwise go through the normal entry code. Signed-off-by:
-
Andy Lutomirski authored
Provide infrastructure to: - find a kernel PMD for a mapping which must be visible to user space for the entry/exit code to work. - walk an address range and share the kernel PMD with it. This reuses a small part of the original KAISER patches to populate the user space page table. [ tglx: Made it universally usable so it can be used for any kind of shared mapping. Add a mechanism to clear specific bits in the user space visible PMD entry. Folded Andys simplifactions ] Originally-by:
-
Dave Hansen authored
In clone_pgd_range() copy the init user PGDs which cover the kernel half of the address space, so a process has all the required kernel mappings visible. [ tglx: Split out from the big kaiser dump and folded Andys simplification ] Signed-off-by:
-
Dave Hansen authored
Kernel page table isolation requires to have two PGDs. One for the kernel, which contains the full kernel mapping plus the user space mapping and one for user space which contains the user space mappings and the minimal set of kernel mappings which are required by the architecture to be able to transition from and to user space. Add the necessary preliminaries. [ tglx: Split out from the big kaiser dump. EFI fixup from Kirill ] Signed-off-by:
-
Dave Hansen authored
With PAGE_TABLE_ISOLATION the user portion of the kernel page tables is poisoned with the NX bit so if the entry code exits with the kernel page tables selected in CR3, userspace crashes. But doing so trips the p4d/pgd_bad() checks. Make sure it does not do that. Signed-off-by:
-
Dave Hansen authored
Add the pagetable helper functions do manage the separate user space page tables. [ tglx: Split out from the big combo kaiser patch. Folded Andys simplification and made it out of line as Boris suggested ] Signed-off-by:
-
Borislav Petkov authored
Keep the "nopti" optional for traditional reasons. [ tglx: Don't allow force on when running on XEN PV and made 'on' printout conditional ] Requested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
Add the initial files for kernel page table isolation, with a minimal init function and the boot time detection for this misfeature. Signed-off-by:
-
Dave Hansen authored
PAGE_TABLE_ISOLATION needs to switch to a different CR3 value when it enters the kernel and switch back when it exits. This essentially needs to be done before leaving assembly code. This is extra challenging because the switching context is tricky: the registers that can be clobbered can vary. It is also hard to store things on the stack because there is an established ABI (ptregs) or the stack is entirely unsafe to use. Establish a set of macros that allow changing to the user and kernel CR3 values. Interactions with SWAPGS: Previous versions of the PAGE_TABLE_ISOLATION code relied on having per-CPU scratch space to save/restore a register that can be used for the CR3 MOV. The %GS register is used to index into our per-CPU space, so SWAPGS *had* to be done before the CR3 switch. That scratch space is gone now, but the semantic that SWAPGS must be done before the CR3 MOV is retained. This is good to keep because it is not that hard to do and it allows to do things like add per-CPU debugging information. What this does in the NMI code is worth pointing out. NMIs can interrupt *any* context and they can also be nested with NMIs interrupting other NMIs. The comments below ".Lnmi_from_kernel" explain the format of the stack during this situation. Changing the format of this stack is hard. Instead of storing the old CR3 value on the stack, this depends on the *regular* register save/restore mechanism and then uses %r14 to keep CR3 during the NMI. It is callee-saved and will not be clobbered by the C NMI handlers that get called. [ PeterZ: ESPFIX optimization ] Based-on-code-from: Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Dave Hansen authored
Global pages stay in the TLB across context switches. Since all contexts share the same kernel mapping, these mappings are marked as global pages so kernel entries in the TLB are not flushed out on a context switch. But, even having these entries in the TLB opens up something that an attacker can use, such as the double-page-fault attack: http://www.ieee-security.org/TC/SP2013/papers/4977a191.pdf That means that even when PAGE_TABLE_ISOLATION switches page tables on return to user space the global pages would stay in the TLB cache. Disable global pages so that kernel TLB entries can be flushed before returning to user space. This way, all accesses to kernel addresses from userspace result in a TLB miss independent of the existence of a kernel mapping. Suppress global pages via the __supported_pte_mask. The user space mappings set PAGE_GLOBAL for the minimal kernel mappings which are required for entry/exit. These mappings are set up manually so the filtering does not take place. [ The __supported_pte_mask simplification was written by Thomas Gleixner. ] Signed-off-by:
-
Thomas Gleixner authored
Many x86 CPUs leak information to user space due to missing isolation of user space and kernel space page tables. There are many well documented ways to exploit that. The upcoming software migitation of isolating the user and kernel space page tables needs a misfeature flag so code can be made runtime conditional. Add the BUG bits which indicates that the CPU is affected and add a feature bit which indicates that the software migitation is enabled. Assume for now that _ALL_ x86 CPUs are affected by this. Exceptions can be made later. Signed-off-by:
-
Thomas Gleixner authored
The loop which populates the CPU entry area PMDs can wrap around on 32bit machines when the number of CPUs is small. It worked wonderful for NR_CPUS=64 for whatever reason and the moron who wrote that code did not bother to test it with !SMP. Check for the wraparound to fix it. Fixes: 92a0f81d ("x86/cpu_entry_area: Move it out of the fixmap") Reported-by:
kernel test robot <fengguang.wu@intel.com> Signed-off-by:
Borislav Petkov <bp@alien8.de>
-
- 22 Dec, 2017 3 commits
-
-
Thomas Gleixner authored
init_espfix_bsp() needs to be invoked before the page table isolation initialization. Move it into mm_init() which is the place where pti_init() will be added. While at it get rid of the #ifdeffery and provide proper stub functions. Signed-off-by:
-
Thomas Gleixner authored
Put the cpu_entry_area into a separate P4D entry. The fixmap gets too big and 0-day already hit a case where the fixmap PTEs were cleared by cleanup_highmap(). Aside of that the fixmap API is a pain as it's all backwards. Signed-off-by:
-
Thomas Gleixner authored
Separate the cpu_entry_area code out of cpu/common.c and the fixmap. Signed-off-by:
-
