1. 24 Sep, 2002 8 commits
    • Robert Love's avatar
      [PATCH] remove preempt workaround in slab.c · 7f644d00
      Robert Love authored
      Before the irqs_disabled() check in preempt_schedule(), we worked around
      some locking issues in slab.c.  Now that we will never preempt with
      interrupts disabled, we can remove those and clean things up.
      
      This is courtesy of Manfred Spraul.
      7f644d00
    • Robert Love's avatar
      [PATCH] s/preempt_count()/in_atomic() in do_exit() · 5d671309
      Robert Love authored
      This converts the debugging check in do_exit from a check on
      preempt_count() to in_atomic().
      
      The main benefit to this is we will stop warning over the BKL and now
      use the standard mechanism for such checks.
      5d671309
    • Matthew Wilcox's avatar
      [PATCH] flock_lock_file livelock fix · 0adfb15a
      Matthew Wilcox authored
      Looks like I dropped a hunk from my patchset, sorry.
      
      We never set FL_SLEEP in the flock case, so if we should block, we'll
      livelock instead.
      0adfb15a
    • Linus Torvalds's avatar
      Simplify elevator algorithm, make it prefer reads heavily. · a9ee74e7
      Linus Torvalds authored
      This is needed for reasonable read latency with the new VM
      behaviour. 
      
      NOTE! This is way too unfair, Andrew and Jens are working on
      alternatives.
      a9ee74e7
    • Ivan Kokshaysky's avatar
      [PATCH] another alpha update · 7f012496
      Ivan Kokshaysky authored
       - Makefile cleanups and fixes
       - a bunch of syscalls added
       - removed crap from asm/ide.h (it's not needed anymore)
       - __down_read_trylock fix
      7f012496
    • Linus Torvalds's avatar
      Merge with DRI CVS tree · 76f92de7
      Linus Torvalds authored
      76f92de7
    • Jens Axboe's avatar
      [PATCH] ide io scheduler thing · 60abdcb3
      Jens Axboe authored
      IDE must use blk_queue_empty() and not do a list_empty() on the
      (potentially only) dispatch queue.  This took quite a while to find
      while debugging a new io scheduler...
      60abdcb3
    • Ingo Molnar's avatar
      [PATCH] pgrp-fix-2.5.38-A2 · 872aa4a8
      Ingo Molnar authored
      This fixes the emacs bug reported by Andries.  It should probably also
      fix other, terminal handling related weirdnesses introduced by the new
      PID handling code in 2.5.38.
      
      The bug was in the session_of_pgrp() function, if no proper session is
      found in the process group then we must take the session ID from the
      process that has pgrp PID (which does not necesserily have to be part of
      the pgrp).  The fallback code is only triggered when no process in the
      process group has a valid session - besides being faster, this also
      matches the old implementation.
      
      [ hey, who needs a POSIX conformance testsuite when we have emacs! ;) ]
      872aa4a8
  2. 23 Sep, 2002 28 commits
    • Andrew Morton's avatar
      [PATCH] direct-io bandaid · bf72e973
      Andrew Morton authored
      The direct-IO code is currently generating 1 meg BIOs (and
      subsequent BUGs) because it doesn't know about bio_add_page().
      
      Could we please drop it to 16k until we get it sorted out?
      bf72e973
    • Greg Kroah-Hartman's avatar
      Merge kroah.com:/home/greg/linux/BK/bleeding_edge-2.5 · 7fcc2c87
      Greg Kroah-Hartman authored
      into kroah.com:/home/greg/linux/BK/gregkh-2.5
      7fcc2c87
    • Adams IT Services's avatar
      [PATCH] USBLCD updates · 9c5e6f5a
      Adams IT Services authored
      -increased timeout value because some people reported problems
      -(important!) Vender ID has changed from 0x1212 to 0x10D2 , my official
        assigned one.
      -added usblcd driver to configure.help
      9c5e6f5a
    • Stuart MacDonald's avatar
      [PATCH] usb whiteheat driver update · 97338442
      Stuart MacDonald authored
      Update to full working driver status. Latest firmware 4.06 too. Driver
      now officially supported.
      97338442
    • Greg Kroah-Hartman's avatar
      [PATCH] USB: made port_softint global for other usb-serial drivers to use. · e185597b
      Greg Kroah-Hartman authored
      Based off of a patch from Stuart MacDonald <stuartm@connecttech.com>
      e185597b
    • Stuart MacDonald's avatar
      [PATCH] USB: clean up the error logic for open() in the usb-serial driver · 9a50ad7f
      Stuart MacDonald authored
      This cleans up the error path in the open() call to make a bit more
      sense.
      9a50ad7f
    • Greg Kroah-Hartman's avatar
      [PATCH] USB: fix for ezusb firmware download · 20e3be5f
      Greg Kroah-Hartman authored
      This fixes a stupid error in the timeout value when downloading firmware
      to a device.  The WhiteHEAT device now works properly with this patch.
      20e3be5f
    • Alan Stern's avatar
      [PATCH] usb-storage: fix return codes... · 0d80c6f5
      Alan Stern authored
      Like the header says, this patch fixes up the various Transfer- and
      Transport-level return codes.  There were a lot of places in the various
      subdrivers that were not particularly careful about distinguishing the
      two; it would help if the people currently maintaining those drivers could
      take a look at my changes to make sure I haven't screwed anything up.
      
      # Converted US_BULK_TRANSFER_xxx to USB_STOR_XFER_xxx, to make it more
      # easily distinguishable from USB_STOR_TRANSPORT_xxx.  (Also, in the
      # future these codes may apply to control transfers as well as to bulk
      # transfers.)
      #
      # Changed USB_STOR_XFER_FAILED to USB_STOR_XFER_ERROR, since it implies
      # a transport error rather than a transport failure.
      #
      # Added a USB_STOR_XFER_STALLED code, to indicate a transfer that was
      # terminated by an endpoint stall.
      
      This patch is in preparation for one in which usb_stor_transfer_partial()
      and usb_stor_transfer() are replaced by usb_stor_bulk_transfer_buf() and
      usb_stor_bulk_transfer_srb() respectively, with slightly different
      argument lists.  Ultimately the subdrivers will be able to use these
      routines in place of the slightly specialized versions they have now and
      in place of the ones in raw_bulk.c.
      0d80c6f5
    • Luc Van Oostenryck's avatar
      [PATCH] #include <linux/version.h> missing in drivers/usb/host/ohci-hcd.c · 7e5b54d4
      Luc Van Oostenryck authored
      compile fails with the following message:
      
      	> In file included from ohci-hcd.c:136:
      	> ohci-dbg.c:318: parse error
      	> make[3]: *** [ohci-hcd.o] Error 1
      
      due to a missing #include <linux/version.h>
      
      Here is a trivial patch for this.
      7e5b54d4
    • David Brownell's avatar
      [PATCH] USB shutdown oopser · 817c0217
      David Brownell authored
      is it guarenteed that callers have zero'd out the device
      before this is invoked?  Else the following is necessary to
      prevent potential OOPS's derefencing interface->dev.driver in
      the generic device layer.
      817c0217
    • David Brownell's avatar
      [PATCH] ehci-hcd: update · df42f7cf
      David Brownell authored
      Here's an EHCI update, I'll send separate patches to sync 2.4 with
      this version.  Changes in this version include:
      
        - An earlier locking update would give trouble on SPARC, where
          irqsave "flags" aren't flags.  This resolves that issue by
          adding a module parameter to limit work done with irqs off.
          (Some net drivers do the same thing.)
      
        - Optionally (now #ifdef DEBUG) collects some statistics on IRQs
          and URBs.  There are more IAA interrupts than I want to see,
          during extended usb-storage loading.
      
        - Adds a commented-out workaround for a problem I've seen on one
          VT8235.  Seems likely an issue with this specific motherboard;
          another tester hasn't reported such issues.
      
        - Includes the jiffies time_after() patch from Tim Schmielau.
      
        - Minor tweaks to the hcd portability (get rid of another #if).
      
        - Minor doc/diagnostic/... updates
      df42f7cf
    • David Brownell's avatar
      [PATCH] ohci-hcd, queue fault recovery + rm DEBUG · 65e2da7e
      David Brownell authored
      This USB patch updates the OHCI driver:
      
        - converts to relying on td_list shadowing the hardware's
          schedule; only collecting the donelist needs dma_to_td(),
          and td list handling works much like EHCI or UHCI.
      
        - leaves faulted endpoint queues (bulk/intr) disabled until
          the relevant drivers had a chance to clean up.
      
        - fixes minor bugs (unreported) in the affected code:
            * byteswap problem when unlinking urbs ... symptom would
              be data toggle confusion (since 2.4.2x) on big-endian cpus
            * latent bug if folk unlinked queue in LIFO order, not FIFO
      
        - removes unnecessary debug code; mostly de-BUG()ged
      
      The interesting fix is the "leave queues halted" one.  As
      discussed on email a while back, this HCD fault handling
      policy (also followed by EHCI) is sufficient to let device
      drivers implement the two key fault handling policies that
      seem to be necessary:
      
          (a) Datagram style, where issues on one I/O won't affect
              the next unless the device halted the endpoint.  The
              device driver can ignore most errors other than -EPIPE.
      
          (b) Stream style, where for example it'd be wrong to ever
              let block N+1 overwrite block N on the disk.  Once
              the first URB fails, the rest would just be unlinked
              in the completion handler.
      
      As a consequence of using the td_list, you can now see urb
      queuing in action in the driverfs 'async' file.  At least, if
      you look at the right time, or use drivers (networking, etc)
      that queue (bulk) reads for a long time.
      65e2da7e
    • Ingo Molnar's avatar
      [PATCH] de-xchg fork.c · 94eda096
      Ingo Molnar authored
      This fixes all xchg()'s and a preemption bug.
      94eda096
    • Ingo Molnar's avatar
      [PATCH] pidhash cleanups, tgid-2.5.38-F3 · 817fdd72
      Ingo Molnar authored
      This does the following things:
      
       - removes the ->thread_group list and uses a new PIDTYPE_TGID pid class
         to handle thread groups. This cleans up lots of code in signal.c and
         elsewhere.
      
       - fixes sys_execve() if a non-leader thread calls it. (2.5.38 crashed in
         this case.)
      
       - renames list_for_each_noprefetch to __list_for_each.
      
       - cleans up delayed-leader parent notification.
      
       - introduces link_pid() to optimize PIDTYPE_TGID installation in the
         thread-group case.
      
      I've tested the patch with a number of threaded and non-threaded
      workloads, and it works just fine. Compiles & boots on UP and SMP x86.
      
      The session/pgrp bugs reported to lkml are probably still open, they are
      the next on my todo - now that we have a clean pidhash architecture they
      should be easier to fix.
      817fdd72
    • Linus Torvalds's avatar
      Terminate a failed IO properly · 76417366
      Linus Torvalds authored
      76417366
    • Linus Torvalds's avatar
      Merge http://linux-isdn.bkbits.net/linux-2.5.isdn · 46796862
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      46796862
    • Kai Germaschewski's avatar
      ISDN: Fix build when CONFIG_ISDN_TTY_FAX is not set · 767bf8a2
      Kai Germaschewski authored
      T30_s * is part of a union, so the typedef needs to exist even when
      CONFIG_ISDN_TTY_FAX is not set.
      767bf8a2
    • Linus Torvalds's avatar
      Merge http://linux-isdn.bkbits.net/linux-2.5.make · c06fd892
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      c06fd892
    • Kai Germaschewski's avatar
      kbuild: Convert missed L_TARGET references · a8c7db20
      Kai Germaschewski authored
      When converting all L_TARGETs to lib.a, I missed these instances.
      a8c7db20
    • Peter Rival's avatar
      [PATCH] Compile fixes for alpha arch · 41447041
      Peter Rival authored
      Update alpha port to work with new nanosecond xtime, and the in_atomic()
      requirements.
      41447041
    • Linus Torvalds's avatar
      Merge bk://thebsh.namesys.com/bk/reiser3-linux-2.5 · 59e8b32c
      Linus Torvalds authored
      into home.transmeta.com:/home/torvalds/v2.5/linux
      59e8b32c
    • Mikael Pettersson's avatar
      [PATCH] fix UP_APIC linkage problem in 2.5.3[78] · cb45d949
      Mikael Pettersson authored
      The problem is that the local APIC code references stuff in
      mpparse, but 2.5.37 changed arch/i386/kernel/Makefile to only
      compile mpparse for SMP.
      
      This patch works around this by enforcing CONFIG_X86_MPPARSE
      for all LOCAL_APIC-enabled configs.
      cb45d949
    • Jens Axboe's avatar
      [PATCH] bio_get_nr_vecs · 63b9d36d
      Jens Axboe authored
      Add bio_get_nr_vecs(). It returns an approximate number of pages that
      can be added to a block device. It's just a ballpark number, but I think
      this is quite fine for the type of thing it is needed for: mpage etc
      need to know an approx size of a bio that they need to allocate. It
      would be silly to continously allocate 64-page sized bio_vec entries, if
      the target cannot do more than 8, for example.
      63b9d36d
    • Jens Axboe's avatar
      [PATCH] pdc4030 · 58c1b542
      Jens Axboe authored
      make pdc4030 work
      58c1b542
    • Jens Axboe's avatar
      [PATCH] trm compile · 6c99eec3
      Jens Axboe authored
      Bad merge from 2.4.20-pre-ac, ide_build_dmatable() does not need data
      direction argument in 2.5 (it's implicit in the request)
      6c99eec3
    • Tim Schmielau's avatar
      76dc17b4
    • Ivan Kokshaysky's avatar
      [PATCH] Re: 2.5.36 IDE fixes · 7d663f71
      Ivan Kokshaysky authored
      I'm terribly sorry - I've sent you the wrong diff, it was
      some intermediate variant. Actually it added extra breakage to
      ide_hwif_configure().
      
      Desired behavior was:
      
      if ctl == base == 0, the device is in "true legacy" mode (as per PCI
      spec); use values from the base address registers otherwise.
      7d663f71
    • Jens Axboe's avatar
      [PATCH] more bio updates · ef869838
      Jens Axboe authored
      cleanup end_that_request_first() end_io handling, and fix bug where
      partial completes didn't get accounted right wrt blk_recalc_rq_sectors()
      ef869838
  3. 22 Sep, 2002 4 commits