- 25 May, 2020 35 commits
-
-
Josef Bacik authored
For unlink transactions and block group removal btrfs_start_transaction_fallback_global_rsv will first try to start an ordinary transaction and if it fails it will fall back to reserving the required amount by stealing from the global reserve. This is problematic because of all the same reasons we had with previous iterations of the ENOSPC handling, thundering herd. We get a bunch of failures all at once, everybody tries to allocate from the global reserve, some win and some lose, we get an ENSOPC. Fix this behavior by introducing BTRFS_RESERVE_FLUSH_ALL_STEAL. It's used to mark unlink reservation. To fix this we need to integrate this logic into the normal ENOSPC infrastructure. We still go through all of the normal flushing work, and at the moment we begin to fail all the tickets we try to satisfy any tickets that are allowed to steal by stealing from the global reserve. If this works we start the flushing system over again just like we would with a normal ticket satisfaction. This serializes our global reserve stealing, so we don't have the thundering herd problem. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Tested-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
For relocation tree detection, relocation backref cache uses btrfs_should_ignore_reloc_root() which uses relocation-specific checks like checking the DEAD_RELOC_ROOT bit. However for general purpose backref cache, we can rely on that check, as it's possible that relocation is also running. For generic purposed backref cache, we detect reloc root by SHARED_BLOCK_REF item. Only reloc root node has its parent bytenr pointing back to itself. And in that case, backref cache will mark the reloc root node useless, dropping any child orphan nodes. So only call btrfs_should_ignore_reloc_root() if the backref cache is for relocation. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
The error cleanup will be extracted as a new function, btrfs_backref_error_cleanup(), and moved to backref.c and exported for later usage. Signed-off-by:
-
Qu Wenruo authored
This the the 2nd major part of generic backref cache. Move it to backref.c so we can reuse it. Signed-off-by:
-
Qu Wenruo authored
This function is the major part of backref cache build process, move it to backref.c so we can reuse it later. Signed-off-by:
-
Qu Wenruo authored
The backref code is going to be moved to backref.c, and read_fs_root() is just a simple wrapper, open-code it to prepare to the incoming code move. Signed-off-by:
-
Qu Wenruo authored
This function is mostly single purpose to relocation backref cache, but since we're moving the main part of backref cache to backref.c, we need to export such function. And to avoid confusion, rename the function to btrfs_should_ignore_reloc_root() make the name a little more clear. Signed-off-by:
-
Qu Wenruo authored
Also change the parameter, since all callers can easily grab an fs_info, there is no need for all the pointer chasing. Signed-off-by:
-
Qu Wenruo authored
Since we're releasing all existing nodes/edges, other than cleanup the mess after error, "release" is a more proper naming here. Signed-off-by:
-
Qu Wenruo authored
Also add comment explaining the cleanup progress, to differ it from btrfs_backref_drop_node(). Signed-off-by:
-
Qu Wenruo authored
With extra comment for drop_backref_node() as it has some similarity with remove_backref_node(), thus we need extra comment explaining the difference. Signed-off-by:
-
Qu Wenruo authored
Signed-off-by:
-
Qu Wenruo authored
Signed-off-by:
-
Qu Wenruo authored
Signed-off-by:
-
Qu Wenruo authored
Signed-off-by:
-
Qu Wenruo authored
Signed-off-by:
-
Qu Wenruo authored
Structure tree_entry provides a very simple rb_tree which only uses bytenr as search index. That tree_entry is used in 3 structures: backref_node, mapping_node and tree_block. Since we're going to make backref_node independnt from relocation, it's a good time to extract the tree_entry into rb_simple_node, and export it into misc.h. Signed-off-by:
-
Qu Wenruo authored
These 3 structures are the main part of btrfs backref cache, move them to backref.h to build the basis for later reuse. Signed-off-by:
-
Qu Wenruo authored
Those three structures are the main elements of backref cache. Add the "btrfs_" prefix for later export. Signed-off-by:
-
Qu Wenruo authored
This patch will also add some comment for the cleanup. Reviewed-by:
-
Qu Wenruo authored
After handle_one_tree_backref(), all newly added (not cached) edges and nodes have the following features: - Only backref_edge::list[LOWER] is linked. This means, we can only iterate from botton to top, not the other direction. - Newly added nodes are not added to cache rb_tree yet So to finish the backref cache, we still need to finish the links and add all nodes into backref cache rb_tree. This patch will refactor the existing code into finish_upper_links(), add more comments of each branch, and why we need to do all the work. Reviewed-by:
-
Qu Wenruo authored
build_backref_tree() uses "goto again;" to implement a breadth-first search to build backref cache. This patch will extract most of its work into a wrapper, handle_one_tree_block(), and use a do {} while() loop to implement the same thing. Reviewed-by: -
Qu Wenruo authored
Bytenr and level are essential parameters for backref_node, thus it makes sense to initialize them at allocation time. Reviewed-by:
-
Qu Wenruo authored
Since backref_edge is used to connect upper and lower backref nodes, and needs to access both nodes, some code can look pretty nasty: list_add_tail(&edge->list[LOWER], &cur->upper); The above code will link @cur to the LOWER side of the edge, while both "LOWER" and "upper" words show up. This can sometimes be very confusing for reader to grasp. This patch introduces a new wrapper, link_backref_edge(), to handle the linking behavior. Which also has extra ASSERT() to ensure caller won't pass wrong nodes. Also, this updates the comment of related lists of backref_node and backref_edge, to make it more clear that each list points to what. Reviewed-by:
-
Qu Wenruo authored
The processing of indirect tree backref (TREE_BLOCK_REF) is the most complex work. We need to grab the fs root, do a tree search to locate all its parent nodes, link all needed edges, and put all uncached edges to pending edge list. This is definitely worth a helper function. Reviewed-by:
-
Qu Wenruo authored
For BTRFS_SHARED_BLOCK_REF_KEY, its processing is straightforward, as we now the parent node bytenr directly. If the parent is already cached, or a root, call it a day. If the parent is not cached, add it pending list. This patch will just refactor this part into its own function, handle_direct_tree_backref() and add some comment explaining the @ref_key parameter. Reviewed-by:
-
Qu Wenruo authored
find_reloc_root() searches reloc_control::reloc_root_tree to find the reloc root. This behavior is only useful for relocation backref cache. For the incoming more generic purpose backref cache, we don't care about who owns the reloc root, but only care if it's a reloc root. So this patch makes the following modifications to make the reloc root search more specific to relocation backref: - Add backref_node::is_reloc_root This will be an extra indicator for generic purposed backref cache. User doesn't need to read root key from backref_node::root to determine if it's a reloc root. Also for reloc tree root, it's useless and will be queued to useless list. - Add backref_cache::is_reloc This will allow backref cache code to do different behavior for generic purpose backref cache and relocation backref cache. - Pass fs_info to find_reloc_root() - Export find_reloc_root() So backref.c can utilize this function. Reviewed-by:
-
Qu Wenruo authored
Add this member so that we can grab fs_info without the help from reloc_control. Reviewed-by:
-
Qu Wenruo authored
These two new members will act the same as the existing local lists, @useless and @list in build_backref_tree(). Currently build_backref_tree() is only executed serially, thus moving such local list into backref_cache is still safe. Also since we're here, use list_first_entry() to replace a lot of list_entry() calls after !list_empty(). Reviewed-by:
-
Qu Wenruo authored
These two functions are weirdly named, mark_block_processed() in fact just marks a range dirty unconditionally, while __mark_block_processed() does extra check before doing the marking. This patch will open code old mark_block_processed, and rename __mark_block_processed() to remove the "__" prefix. Since we're here, also kill the forward declaration, which could also kill in_block_group() with in_range() macro. Reviewed-by:
-
Qu Wenruo authored
In the core function of relocation, build_backref_tree, it needs to iterate all backref items of one tree block. Use btrfs_backref_iter infrastructure to do the loop and make the code more readable. The backref items look would be much more easier to read: ret = btrfs_backref_iter_start(iter, cur->bytenr); for (; ret == 0; ret = btrfs_backref_iter_next(iter)) { /* The really important work */ } Reviewed-by:Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Qu Wenruo authored
This function will go to the next inline/keyed backref for btrfs_backref_iter infrastructure. Reviewed-by:
-
Qu Wenruo authored
Due to the complex nature of btrfs extent tree, when we want to iterate all backrefs of one extent, this involves quite a lot of work, like searching the EXTENT_ITEM/METADATA_ITEM, iteration through inline and keyed backrefs. Normally this would result in a complex code, something like: btrfs_search_slot() /* Ensure we are at EXTENT_ITEM/METADATA_ITEM */ while (1) { /* Loop for extent tree items */ while (ptr < end) { /* Loop for inlined items */ /* Real work here */ } next: ret = btrfs_next_item() /* Ensure we're still at keyed item for specified bytenr */ } The idea of btrfs_backref_iter is to avoid such complex and hard to read code structure, but something like the following: iter = btrfs_backref_iter_alloc(); ret = btrfs_backref_iter_start(iter, bytenr); if (ret < 0) goto out; for (; ; ret = btrfs_backref_iter_next(iter)) { /* Real work here */ } out: btrfs_backref_iter_free(iter); This patch is just the skeleton + btrfs_backref_iter_start() code. Reviewed-by: -
Jules Irenge authored
Sparse reports a warning at btrfs_tree_lock() warning: context imbalance in btrfs_tree_lock() - wrong count at exit The root cause is the missing annotation at btrfs_tree_lock() Add the missing __acquires(&eb->lock) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Reviewed-by:
-
Jules Irenge authored
Sparse reports a warning at btrfs_lock_cluster() warning: context imbalance in btrfs_lock_cluster() - wrong count The root cause is the missing annotation at btrfs_lock_cluster() Add the missing __acquires(&cluster->refill_lock) annotation. Signed-off-by:
-
- 24 May, 2020 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "A set of EFI fixes: - Don't return a garbage screen info when EFI framebuffer is not available - Make the early EFI console work properly with wider fonts instead of drawing garbage - Prevent a memory buffer leak in allocate_e820() - Print the firmware error record properly so it can be decoded by users - Fix a symbol clash in the host tool build which only happens with newer compilers. - Add a missing check for the event log version of TPM which caused boot failures on several Dell systems due to an attempt to decode SHA-1 format with the crypto agile algorithm" * tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tpm: check event log version before reading final events efi: Pull up arch-specific prototype efi_systab_show_arch() x86/boot: Mark global variables as static efi: cper: Add support for printing Firmware Error Record Reference efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820() efi/earlycon: Fix early printk for wider fonts efi/libstub: Avoid returning uninitialized data from setup_graphics() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Unbreak stack dumps for inactive tasks by interpreting the special first frame left by __switch_to_asm() correctly. The recent change not to skip the first frame so ORC and frame unwinder behave in the same way caused all entries to be unreliable, i.e. prepended with '?'. - Use cpumask_available() instead of an implicit NULL check of a cpumask_var_t in mmio trace to prevent a Clang build warning" * tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of fixes for the scheduler: - Fix handling of throttled parents in enqueue_task_fair() completely. The recent fix overlooked a corner case where the first iteration terminates due to an entity already being on the runqueue which makes the list management incomplete and later triggers the assertion which checks for completeness. - Fix a similar problem in unthrottle_cfs_rq(). - Show the correct uclamp values in procfs which prints the effective value twice instead of requested and effective" * tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list sched/debug: Fix requested task uclamp values shown in procfs sched/fair: Fix enqueue_task_fair() warning some more -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna Bhowmik. 2) Nexthop attributes aren't being checked properly because of mis-initialized iterator, from David Ahern. 3) Revert iop_idents_reserve() change as it caused performance regressions and was just working around what is really a UBSAN bug in the compiler. From Yuqi Jin. 4) Read MAC address properly from ROM in bmac driver (double iteration proceeds past end of address array), from Jeremy Kerr. 5) Add Microsoft Surface device IDs to r8152, from Marc Payne. 6) Prevent reference to freed SKB in __netif_receive_skb_core(), from Boris Sukholitko. 7) Fix ACK discard behavior in rxrpc, from David Howells. 8) Preserve flow hash across packet scrubbing in wireguard, from Jason A. Donenfeld. 9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric Dumazet. 10) Fix encryption error checking in kTLS code, from Vadim Fedorenko. 11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki. 12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet. 13) Fix use after free in mlxsw driver, from Jiri Pirko. 14) Order kTLS key destruction properly in mlx5 driver, from Tariq Toukan. 15) Check devm_platform_ioremap_resource() return value properly in several drivers, from Tiezhu Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) net: smsc911x: Fix runtime PM imbalance on error net/mlx4_core: fix a memory leak bug. net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend net: phy: mscc: fix initialization of the MACsec protocol mode net: stmmac: don't attach interface until resume finishes net: Fix return value about devm_platform_ioremap_resource() net/mlx5: Fix error flow in case of function_setup failure net/mlx5e: CT: Correctly get flow rule net/mlx5e: Update netdev txq on completions during closure net/mlx5: Annotate mutex destroy for root ns net/mlx5: Don't maintain a case of del_sw_func being null net/mlx5: Fix cleaning unmanaged flow tables net/mlx5: Fix memory leak in mlx5_events_init net/mlx5e: Fix inner tirs handling net/mlx5e: kTLS, Destroy key object after destroying the TIS net/mlx5e: Fix allowed tc redirect merged eswitch offload cases net/mlx5: Avoid processing commands before cmdif is ready net/mlx5: Fix a race when moving command interface to events mode net/mlx5: Add command entry handling completion rxrpc: Fix a memory leak in rxkad_verify_response() ...
-
