Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/net-2.6

Add OpenIB maintainers information to MAINTAINERS.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add files to Documentation/infiniband that describe the tree under
/sys/class/infiniband, the IPoIB driver and the userspace MAD access driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the 0x1b ioctl magic number used by ib_umad module to
Documentation/ioctl-number.txt.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a driver that provides a character special device for each
InfiniBand port.  This device allows userspace to send and receive
MADs via write() and read() (with some control operations implemented
as ioctls).

All operations are 32/64 clean and have been tested with 32-bit
userspace running on a ppc64 kernel.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add functions for handling IPoIB multicast and multiple partitions.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a driver that implements the (IPoIB) IP-over-InfiniBand protocol.
This is a network device driver of type ARPHRD_INFINIBAND (and
addr_len INFINIBAND_ALEN bytes).

The ARP/ND implementation for this driver is not completely
straightforward, because InfiniBand requires an additional path lookup
be performed (through an IB-specific mechanism) after a remote
hardware address has been resolved.  We are very open to suggestions
of a better way to handle this than the current implementation.

Although IB has a special multicast group join mode intended to
support IP multicast routing (non member join), no means to identify
different multicast styles has yet been determined, so all joins by
the driver are currently full member joins.  We are looking for
guidance in how to solve this.

The IPoIB protocol/encapsulation is described in the Internet-Drafts
  http://www.ietf.org/internet-drafts/draft-ietf-ipoib-architecture-04.txt
  http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txtSigned-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ipv6_ib_mc_map() to convert IPv6 multicast addresses to IPoIB
hardware addresses, and add support for autoconfiguration for devices
with type ARPHRD_INFINIBAND.

The mapping for multicast addresses is described in
  http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txtSigned-off-by: Nitin Hande <Nitin.Hande@Sun.Com>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ip_ib_mc_map() to convert IPv4 multicast addresses to IPoIB
hardware addresses.  Also add <linux/if_infiniband.h> so INFINIBAND_ALEN
has a home.

The mapping for multicast addresses is described in
  http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txtSigned-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD (management datagram) code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add code for remaining InfiniBand objects (address vectors, multicast
groups, memory regions and protection domains)
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add CQ (completion queue) and QP (queue pair) code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add device initializaton code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add event queue code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add firmware command processing code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add midlayer interface code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a low-level driver for Mellanox MT23108 and MT25208 HCAs.  The
MT25208 is only fully supported when in MT23108 compatibility mode;
only the very beginnings of support for native MT25208 mode (required
for HCAs without local memory) is present.

(As a side note, I believe this driver would be the first in-tree
consumer of the PCI MSI/MSI-X API)
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for sending queries to the SA (Subnet Administration).  In
particular the PathRecord and MCMember (multicast group member) used
by the IP-over-InfiniBand driver are implemented.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD layer SMI (Subnet Management Interface) code.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD layer private implementation headers.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for handling InfiniBand MADs (management datagrams),
including sending and receiving MADs as well as passing MADs on to
local agents.

This is required for an SM (subnet manager) to discover and configure
the host, since the SM's query MADs must be passed to the local SMA
(subnet management agent).  In addition, this support is used by upper
level protocols to send queries to and receive responses from the SM.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add public headers for handling InfiniBand MADs (management
datagrams), including sending and receiving MADs as well as passing
MADs on to local agents.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the appropriate lines to drivers/Kconfig and drivers/Makefile so
that the kernel configuration and build systems know about drivers/infiniband.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add implementation of core InfiniBand support.  This can be thought of
as a midlayer that provides an abstraction between low-level hardware
drivers and upper level protocols (such as IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add public headers for core InfiniBand support.  This can be thought
of as a midlayer that provides an abstraction between low-level
hardware drivers and upper level protocols (such as
IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/net-2.6

With this we can remove all the cut'n'pasted layouts in all inet_sock
derived classes, such as tcp_sock, udp_sock, sctp_sock, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

Taking ECN bits into account doesn't make sense. The two bits were
still unused at the time the code was written so this brings back the
old behaviour.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes skb_queue_walk() in the same manner
as in list_for_each() prefetch optimization, see
http://marc.theaimsgroup.com/?l=linux-kernel&m=110399132418587Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

For the case where CONFIG_LLC2 is modular and thus
llc_proc.c needs to get at this symbol.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Use S_ISSOCK() instead.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch below contans the following possible cleanups:
- make some needlessly global code static
- sch_htb.c: #undef HTB_DEBUG
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch below contains the following possible cleanups:
- make some needlessly global code static
- remove the following unused global function:
  - transport.c: rxrpc_clear_transport
- remove the following unneeded EXPORT_SYMBOL:
  - rxrpc_syms.c: rxrpc_call_flush
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>