- 07 Feb, 2019 3 commits
-
-
Christian König authored
The exclusive fence is of course perfectly optional here. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Harish Kasiviswanathan authored
v2: Fix SMU message format Send override message after SMU enable features Signed-off-by:Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by:
Eric Huang <JinhuiEric.Huang@amd.com> Signed-off-by:
-
Harish Kasiviswanathan authored
The new Vega series GPU cards have in-built bridges. To get the pcie speed and width supported by the platform walk the hierarchy and get the slowest link. Signed-off-by:
-
- 06 Feb, 2019 37 commits
-
-
Dmytro Laktyushkin authored
Dp needs half container rate to properly support odm Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Nikola Cornij <Nikola.Cornij@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Anthony Koo authored
[Why] Pipe related init is possible to optimized if we know what we intend to program, and if we can determine it matches what is already programmed for the pipe. [How] First step is to isolate the pipe related init code Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Anthony Koo authored
[Why] Keep enable_stream_timing programming only timing related stuff. [How] Move DRR and static screen mask programming from enable_stream_timing to outside in apply_single_controller_ctx_to_hw Signed-off-by:
-
Anthony Koo authored
[Why] If we determine the stream we are trying to commit matches HW, we want to try to optimize. [How] Try to acquire the HW resources that are already enabled and optimize. Also skip backend reprogramming Signed-off-by:
-
Anthony Koo authored
[Why] Need to understand whether link is active aside from stream state. This could be used to check what links are enabled by GOP. [How] Store link_active state in link status and initialize it by checking if the DIG is enabled. Keep it updated on every link enable and disable Signed-off-by:
-
Anthony Koo authored
[Why] More clearly isolate the code that is involved in programming of vupdate interrupt [How] Add function for programming of vupdate interrupt. Call it after timing is programmed. Signed-off-by:
Tony Cheng <Tony.Cheng@amd.com> Signed-off-by:
-
Anthony Koo authored
[Why] Need to figure out whether a timing we want to commit matches something that GOP already programmed, in which case we can decide to some optimizations [How] 1. Add way to check for DIG FE 2. Add way to check for matching OTG timing 3. Add way to check for matching pixel clock (if possible) - Currently only support DP for pixel clock, since it is easy to calc Signed-off-by: -
mark mcgarrity authored
Signed-off-by:
mark mcgarrity <mark.mcgarrity@amd.com> Reviewed-by:
-
Murton Liu authored
[Why] When moving mouse onto or off of pip plane, screen would flash briefly due to garbage negative pos values being programmed for cursor. Also, text flashes due to PIP flips taking too long. [How] When negative pos value seen, default to 0 and adjust by modifying cursor hotspot. For flip issue, only do post update when optimize required vs all the time. Signed-off-by:
Murton Liu <murton.liu@amd.com> Reviewed-by:
Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by:
-
Anthony Koo authored
[Why] Current implementation that maps link_rate_set value to actual link rate is incorrect. [How] Fix this implementation, such that link_rate_set indexes into the supported_link_rate table. Signed-off-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Eryk Brol authored
[Why] VM_helper needs to be intialized with the dc struct in order to fix an unallocated memory issue. System aperture settings should be initialized to 0 and guarded with a check to make sure vm_config is valid. [How] Allocate and free memory for vm_helper with other dc members. Check whether the vm_config valid bit is set before initializing aperture settings. Signed-off-by:
Eryk Brol <eryk.brol@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Wesley Chalmers authored
[WHY] Bandwidth calculation formulas currently do not take Stereo 3D + Stutter properly into account. Disable stutter feature when we detect a Stereo 3D mode as a temporary workaround. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Signed-off-by:
-
Yongqiang Sun authored
We need to calcualte vline position in DC for DCN. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Jerry (Fangzhi) Zuo authored
[Why] The dc_sink was released but the pointer on the aconnector was not cleared. [How] Clear it. Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] There are opt1c lock warnings and CRTC read timeouts when running the "igt@kms_plane@plane-position-hole-dpms-pipe-*" tests. These are caused by trying to reprogram planes that are not in the current context. DPMS off removes the stream from the context. In this case: new_crtc_state->active_changed = true new_crtc_state->mode_changed = false The planes are reprogrammed before the stream is removed from the context because stream_state->mode_changed = false. For DPMS adds the stream and planes back to the context: new_crtc_state->active_changed = true new_crtc_state->mode_changed = false The planes are also reprogrammed here before the stream is added to the context because stream_state->mode_changed = true. They were not previously in the current context so warnings occur here. [How] Set stream_state->mode_changed = true when new_crtc_state->active_changed = true too. This prevents reprogramming before the context is applied in DC. The programming will be done after the context is applied. Signed-off-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
-
Pratik Vishwakarma authored
Remove extraneous parentheses around the comparison to silence this warning Signed-off-by:
Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] This fixes an mpc programming error for the following sequence of atomic commits when pipe split is enabled: Commit 1: CRTC0 (plane 4, plane 3) Pipe 0: old_plane_state = A0, new_plane_state = A1, new_tg = T0 Pipe 1: old_plane_state = B0, new_plane_state = B1, new_tg = T0 Pipe 2: old_plane_state = A0, new_plane_state = A1, new_tg = T0 Pipe 3: old_plane_state = B0, new_plane_state = B1, new_tg = T0 Commit 2: CRTC0 (plane 3), CRTC1 (plane 2) Pipe 0: old_plane_state = A1, new_plane_state = A2, new_tg = T0 Pipe 1: old_plane_state = B1, new_plane_state = B2, new_tg = T1 Pipe 2: old_plane_state = A1, new_plane_state = NULL, new_tg = NULL Pipe 3: old_plane_state = B1, new_plane_state = NULL, new_tg = NULL In the second commit the assertion for mpcc in use is hit because mpcc disconnect never occurs for pipe 1. This is because the stream changes for pipe 1 and the opp_list is empty. This sequence occurs when running the "igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two displays connected. [How] Expand the reset condition to include: "old_pipe_ctx->stream_res.tg != new_pipe_ctx->stream_res.tg" ...but only when the plane state is non-NULL for both old and new. Signed-off-by:
-
Jerry (Fangzhi) Zuo authored
[Why] It fixes the failure to create stream for sink in the scenario when hotplug SST and MST in sequence, and disconnect MST. [How] Add the fake sink back after the majority of MST rework is done. Signed-off-by:
-
Dmytro Laktyushkin authored
Adding a bit vector to allow forcing odm on specific otgs Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Su Sung Chung authored
in program_timing_sync, after all the pipes are grouped, store timing sync info in dc_stream_status Signed-off-by:
Su Sung Chung <Su.Chung@amd.com> Reviewed-by:
-
Josip Pavic authored
[Why] Reduced backlight for ABM 2.2 at levels 1 and 2 is desired for power savings. [How] Reduce the max reduction parameters for ABM 2.2 Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Reviewed-by:
-
Yongqiang Sun authored
Signed-off-by:
-
Chiawen Huang authored
[Why] When querying HPD via GPIO flow, it will create a new gpio object then free in the end of query. There is a irql issue for HPD querying at ISR level. [How] Therefore, creating the HPD gpio object in dc_link and set it as unlcok in default. 1. reducing unnecessary malloc/free when HPD querying. 2. reducing init GPIO flow. 3. add lock/unlock to prevent multi gpio service running. Signed-off-by:
Chiawen Huang <chiawen.huang@amd.com> Reviewed-by:
-
Steven Chiu authored
Signed-off-by:
Steven Chiu <steven.chiu@amd.com> Reviewed-by:
-
Wenjing Liu authored
[why] is_blanked is not a general indicator of if a pipe is synced for all asics. plane state is more accurate and applicable for all asics. [how] Remove is_blanked call and add checking plane_state against NULL instead. Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by:
-
Krunoslav Kovac authored
[Why] On HW that doesn't have input LUT, we may combine degamma with OS ramp Problem here is that it assumes DGAM is inverse of PQ or SRGB. It doesn't handle linear case, it would default to sRGB and always enable DGAM.. [How] Add handling for linear case. Also check for null ramp and instead of blowing up, assume it's identity. Signed-off-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
-
Ilya Bakoulin authored
[Why] Setting monitor refresh rate below freesync range would cause the monitor to go blank indefinitely with freesync enabled [How] Set vrr_supported and ignore_msa_timing_param according to whether the refresh rate is above or below the minimum freesync frequency. Signed-off-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by:
-
Paul Hsieh authored
[Why] Second screen to clone/extend mode, driver will send ABM pipe command to DMCU. Change mode from clone/extend to second screen only, driver send ABM level command to disable ABM but this command will not clear ABM pipe data. At this time, change second screen to PC screen only, driver will send first command "ABM_LEVEL", it will turn on ABM with incorrect ABM pile so that DMCU is blocking. [How] When driver try to disable ABM, change command from "ABM LEVEL" to "ABM PIPE" so that it will clear ABM pile data. Signed-off-by:
Paul Hsieh <Paul.Hsieh@amd.com> Reviewed-by:
-
Anthony Koo authored
[Why] The problem is that we accidentally stopped loading some of the IRAM bytes used for the backlight ramping mechanism. This happened when we started reserving some region of IRAM as DMCU FW write only. [How] This change will define a start+end region for the IRAM read only region. So the parameters needed for the backlight operation will be loaded since it will be defined outside of the read only region. Signed-off-by:
-
Xiaodong Yan authored
[Why] Different panel need different time from backlight disable to end of valid video data, if the time is too short, panel will flash when dpms off [How] Add monitor patch to control the time from backlight disable to end of valid video data, Signed-off-by:
Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] This provides little debug value and creates a lot of dmesg noise. [How] Remove it. Signed-off-by:
David Francis <David.Francis@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] The stream_update struct is left unitialized but DC will access its fields. This usually results in global state validation occur during any atomic commit with state->allow_modeset = true. [How] Initialize the struct to zero for every stream we check. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The indenting for this function is a few levels too deep and can be simplified a fair bit. This patch is in preparation for functional changes that fix update type determination to occur less frequently and more accurately. [How] Place checks early and exit/continue when possible. This isn't a functional change. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] We were always passing the first surface on the stream status for flip updates when we should be using the surface associated with the plane. [How] Use the dc_plane_state from the plane that's being updated. FreeSync should also only keep track of updates from the primary plane, so the check needed to be updated. The acrtc->stream state doesn't need to be checked for NULL before updating FreeSync either since there needs to be a stream to be inside this function as a prerequisite. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Most surface updates weren't propagated onto the surface during dc_commit_updates_for_stream. This makes it more difficult for DC to determine the actual surface update type required. [How] Use copy_surface_update_to_plane to propagate the changes. The FreeSync surface timing information update for BTR has been moved out of amdgpu_dm.c into this function as well. Signed-off-by:
-
John Barberiz authored
[Why] "IRQ_HPD Pulse Length Test" DP compliance test fails. Test complains that certain DPCD registers are not read within 100 ms. [How] msleep is inaccurate for small values. Used udelay instead for accuracy. Signed-off-by:
John Barberiz <John.Barberiz@amd.com> Reviewed-by:
-
Christian König authored
No functional change. Signed-off-by:
-
