- 01 Oct, 2006 3 commits
-
-
Eric Sesterhenn authored
this overrun was spotted by coverity (cid #1403). If type == ARRAY_SIZE(scsi_device_types), we are off by one. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Denis Vlasenko authored
Comment says "Read high byte first as some registers increment..." but code doesn't guarantee that, I think: return ((ahd_inb(ahd, port+1) << 8) | ahd_inb(ahd, port)); Compiler can reorder it. Make the order explicit. Signed-off-by:
Denis Vlasenko <vda.linux@googlemail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Fixed rejections and added aic7xxx code Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
- 27 Sep, 2006 1 commit
-
-
Andrew Morton authored
device_reprobe() should return an error code. When it does so, scsi_device_reprobe() should propagate it back. Signed-off-by:
-
- 26 Sep, 2006 36 commits
-
-
Eric Sesterhenn authored
gcc 4.1 with some extra warnings show the following: drivers/scsi/ipr.c:6361: warning: comparison of unsigned expression < 0 is always false drivers/scsi/ipr.c:6385: warning: comparison of unsigned expression < 0 is always false drivers/scsi/ipr.c:6415: warning: comparison of unsigned expression < 0 is always false The problem is that rc is of the type u32, which can never be smaller than zero, therefore all three error handling checks get useless. This patch changes it to a normal int, because all usages / all functions it get used with expect an int. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
Henrik Kretzschmar authored
Converts pci_module_init() to pci_register_driver() in the scsi subsys on 23 drivers which only return the value of pci_module_init(). Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by:
-
Eric Sesterhenn authored
another signdness warning from gcc 4.1 drivers/scsi/osst.c:5154: warning: comparison of unsigned expression < 0 is always false The problem is that blk is defined as unsigned, but all usages of it are normal int cases. osst_get_frame_position() and osst_get_sector() return ints and can return negative values. If blk stays an unsigned int, the error check is useless. Signed-off-by:
-
Henrik Kretzschmar authored
Free seagate.h from obsolete drivers/scsi.h, remove a double inclusion od linux/delay.h and remove the unneeded scsi/scsi_ioctl.h Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Acked-by:
"Moore, Eric Dean" <Eric.Moore@lsil.com> Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Eric W. Biederman authored
When testing on a Unisys machine it was discovered that the megaraid driver would not initialize as it was requesting irq 162 instead of irq 1442 it was assigned. The problem was the irq number had been truncated by being stored in an unsigned char. This patches fixes that problem and the driver now appears to work. The ioctl interface appears fundamentally broken as it exports the irq number to user space in an unsigned char. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Alexey Dobriyan authored
sparse "defined twice" warning Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Randy Dunlap authored
drivers/scsi/dc395x.c:1224: warning: format '%i' expects type 'int', but argument 5 has type 'size_t' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Brian King authored
Adds support to attach SATA devices to ipr SAS adapters. Signed-off-by:
-
Henrik Kretzschmar authored
Signed-off-by:
-
Jes Sorensen authored
Original patch from Ian Dall in bugzilla. Set command timeout as specified by the SCSI layer rather than hardcode it to 30 seconds. I have received a couple of reports of people hitting this one with various tape configurations and the patch looks obviously correct. - Jes From http://bugzilla.kernel.org/show_bug.cgi?id=6275 ian@beware.dropbear.id.au (Ian Dall): The command sent to the card was using a 30second timeout regardless of the timeout requested in the scsi command passed down from higher levels. Signed-off-by:Jes Sorensen <jes@sgi.com> Signed-off-by:
-
Muli Ben-Yehuda authored
aic94xx relies on external firmware and thus requires FW_LOADER. Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
-
Douglas Gilbert authored
This sg driver patch addresses the problem with larger page sizes reported by Brian King in this post: http://marc.theaimsgroup.com/?l=linux-scsi&m=115867718623631&w=2 Some other related matters are also addressed. Some of these prevent oopses when the SG_SCATTER_SZ or scatter_elem_sz are set to inappropriate values. The scatter_elem_sz has been tested up to 4 MB which should make the largest data transfer with one SCSI command, 32 MB less one block, achievable with a relatively small number of elements in the scatter gather list. ChangeLog: - add scatter_elem_sz boot time parameter and sysfs module parameter that is initialized to SG_SCATTER_SZ - the driver will then adjust scatter_elem_sz to be the max(given(scatter_elem_sz), PAGE_SIZE) It will also round it up, if necessary, to be a power of two - clean up sg.h header, correct bad urls and some statements that are no longer valid - make the def_reserved_size sysfs module attribute writable Signed-off-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
James Smart authored
Signed-off-by: -
Heiko Carstens authored
Convert cmm's usage of kernel_thread to kthread_run. Also create the cmmthread at module load time, so it is possible to check if creation of the thread fails. In addition the cmmthread now gets terminated when the module gets unloaded instead of leaving a stale kernel thread. Also check the return values of other registration functions at module load and handle their return values appropriately. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Include the host architecture's ptrace-abi.h instead of ptrace.h. There was some cpp mangling of names around the ptrace.h include to avoid symbol clashes between UML and the host architecture. Most of these can go away. The exception is struct pt_regs, which is convenient to have in userspace, but must be renamed in order that UML can define its own. ptrace-x86_64.h needed to have some now-obsolete cpp cruft and a declaration removed. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Jeff Dike authored
The use of SEGMENT_RPL_MASK in the i386 ptrace.h introduced by x86-allow-a-kernel-to-not-be-in-ring-0.patch broke the UML build, as UML includes the underlying architecture's ptrace.h, but has no easy access to the x86 segment definitions. Rather than kludging around this, as in the past, this patch splits the userspace-usable parts, which are the bits that UML needs, of ptrace.h into ptrace-abi.h, which is included back into ptrace.h. Thus, there is no net effect on i386. As a side-effect, this creates a ptrace header which is close to being usable in /usr/include. x86_64 is also treated in this way for consistency. There was some trailing whitespace there, which is cleaned up. Signed-off-by:
-
Alan Cox authored
Ensure current->signal->tty doesn't get freed during log_exec(). Signed-off-by:
-
Jeff Dike authored
The KSTK_* macros used an inordinate amount of stack. In order to overcome an impedance mismatch between their interface, which just returns a single register value, and the interface of get_thread_regs, which took a full pt_regs, the implementation created an on-stack pt_regs, filled it in, and returned one field. do_task_stat calls KSTK_* twice, resulting in two local pt_regs, blowing out the stack. This patch changes the interface (and name) of get_thread_regs to just return a single register from a jmp_buf. The include of archsetjmp.h" in registers.h to get the definition of jmp_buf exposed a bogus include of <setjmp.h> in start_up.c. <setjmp.h> shouldn't be used anywhere any more since UML uses the klibc setjmp/longjmp. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Clean set_ether_mac usage. Maybe could also be removed, but surely it can't be a global function taking a void* argument. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by:
-
Jeff Dike authored
timer_irq_inited was useless, so it is removed. Signed-off-by:
-
Jeff Dike authored
set_interval returns an error instead of panicing if setitimer fails. Some of its callers now check the return. enable_timer is largely tt-mode-specific, so it is marked as such, and the only skas-mode caller is made to call set-interval instead. user_time_init was a no-value-added wrapper around set_interval, so it is gone. Since set_interval is now called from kernel code, callers no longer pass ITIMER_* to it. Instead, they pass a flag which is converted into ITIMER_REAL or ITIMER_VIRTUAL. Signed-off-by:
-
Jeff Dike authored
Have most signals go through an arch-provided handler which recovers the sigcontext and then calls a generic handler. This replaces the ARCH_GET_SIGCONTEXT macro, which was somewhat fragile. On x86_64, recovering %rdx (which holds the sigcontext pointer) must be the first thing that happens. sig_handler duly invokes that first, but there is no guarantee that I can see that instructions won't be reordered such that %rdx is used before that. Having the arch provide the handler seems much more robust. Some signals in some parts of UML require their own handlers - these places don't call set_handler any more. They call sigaction or signal themselves. Signed-off-by:
-
Jeff Dike authored
- Various cleanups in the sigio code. - Removed explicit zero-initializations of a few structures. - Improved some error messages. - An API change - there was an asymmetry between reactivate_fd calling maybe_sigio_broken, which goes through all the machinery of figuring out if a file descriptor supports SIGIO and applying the workaround to it if not, and deactivate_fd, which just turns off the descriptor. This is changed so that only activate_fd calls maybe_sigio_broken, when the descriptor is first seen. reactivate_fd now calls add_sigio_fd, which is symmetric with ignore_sigio_fd. This removes a recursion which makes a critical section look more critical than it really was, obsoleting a big comment to that effect. This requires keeping track of all descriptors which are getting the SIGIO treatment, not just the ones being polled at any given moment, so that reactivate_fd, through add_sigio_fd, doesn't try to tell the SIGIO thread about descriptors it doesn't care about. Signed-off-by:
-
Jeff Dike authored
UML can get a SIGBUS anywhere if the tmpfs mount being used for its memory runs out of space. This patch adds a printk before the panic to provide a clue as to what likely went wrong. Signed-off-by:
-
Jeff Dike authored
There were some bugs in handling failures to exec helper programs. errno was passed back from the child with the wrong sign. It was also ignored. In the case where it mattered, the errno from the (successful) read in the parent was used instead. Signed-off-by:
-
Jeff Dike authored
arch/um/kernel/tlb.c had some pretty serious whitespace problems. I also fixed some returns. Signed-off-by:
-
Jeff Dike authored
Stack randomization needs to be conditional on the personality allowing it. Signed-off-by:
-
Jeff Dike authored
There were a bunch of missed ARRAY_SIZE opportunities. Also, some formatting fixes in the affected areas of code. Signed-off-by:
-
Jeff Dike authored
This patch adds an implementation of setjmp and longjmp to UML, allowing access to the inside of a jmpbuf without needing the access macros formerly provided by libc. The implementation is stolen from klibc. I copy the relevant files into arch/um. I have another patch which avoids the copying, but requires klibc be in the tree. setjmp and longjmp users required some tweaking. Includes of <setjmp.h> were removed and includes of the UML longjmp.h were added where necessary. There are also replacements of siglongjmp with UML_LONGJMP which I somehow missed earlier. Signed-off-by:
-
Rafael J. Wysocki authored
Add the pm_trace attribute in /sys/power which has to be explicitly set to one to really enable the "PM tracing" code compiled in when CONFIG_PM_TRACE is set (which modifies the machine's CMOS clock in unpredictable ways). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Rafael J. Wysocki authored
Detect the situations in which the time after a resume from disk would be earlier than the time before the suspend and prevent them from happening on i386. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Acked-by:
-
Rafael J. Wysocki authored
Hack uart_suspend_port() and uart_resume_port() so that serial console ports are not suspended if CONFIG_DISABLE_CONSOLE_SUSPEND is set. This makes it possible to debug the suspend and resume routines of all device drivers as well as the lowest-level swsusp code with the help of the serial console. Signed-off-by:
-
