- 23 Jan, 2020 40 commits
-
-
Greg Kroah-Hartman authored
-
Stephan Gerhold authored
commit 458ea3ad upstream. Those regulators are not actually supported by the AB8500 regulator driver. There is no ab8500_regulator_info for them and no entry in ab8505_regulator_match. As such, they cannot be registered successfully, and looking them up in ab8505_regulator_match causes an out-of-bounds array read. Fixes: 547f384f ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-2-stephan@gerhold.netSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
commit 07d36985 upstream. Since there are some DIE which has only ranges instead of the combination of entrypc/highpc, address verification must use dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc. Also, the ranges only DIE will have a partial code in different section (e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In that case, we can not use dwarf_entrypc() or die_entrypc(), because the offset from original DIE can be a minus value. Instead, this simply gets the symbol and offset from symtab. Without this patch; # perf probe -D clear_tasks_mm_cpumask:1 Failed to get entry address of clear_tasks_mm_cpumask Error: Failed to add events. And with this patch: # perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0 p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5 p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8 p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16 p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82 Committer testing: I managed to reproduce the above: [root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask _text+919968 p:probe/clear_tasks_mm_cpumask_1 _text+919973 p:probe/clear_tasks_mm_cpumask_2 _text+919976 [root@quaco ~]# But then when trying to actually put the probe in place, it fails if I use :0 as the offset: [root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5 <clear_tasks_mm_cpumask@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/kernel/cpu.c:0> 0 void clear_tasks_mm_cpumask(int cpu) 1 { 2 struct task_struct *p; [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0 Probe point 'clear_tasks_mm_cpumask' not found. Error: Failed to add events. [root@quaco The next patch is needed to fix this case. Fixes: 576b5237 ("perf probe: Fix probing symbols with optimization suffix") Reported-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157199318513.8075.10463906803299647907.stgit@devnote2Signed-off-by:
-
Bart Van Assche authored
commit b1335f5b upstream. This patch fixes an unintended sign extension on left shifts. From Colin King: "Shifting a u8 left will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an u64 will sign extend the value causing the upper 32 bits to be set in the result." Fix this by using get_unaligned_be*() instead. Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.orgReported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
commit c941e0d1 upstream. Print the string for which conversion failed instead of printing the function name twice. Fixes: 2650d71e ("target: move transport ID handling to the core") Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.orgSigned-off-by:
-
Pan Bian authored
commit 29d28f2b upstream. The member hba->pcidev may be used after its reference is dropped. Move the put function to where it is never used to avoid potential use after free issues. Fixes: a7717180 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr") Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.comSigned-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Pan Bian authored
commit 3fe3d242 upstream. The variable init_fw_cb is released twice, resulting in a double free bug. The call to the function dma_free_coherent() before goto is removed to get rid of potential double free. Fixes: 2a49a78e ("[SCSI] qla4xxx: added IPv6 support.") Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.comSigned-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Dan Carpenter authored
commit 906ca635 upstream. This error path is missing an unlock. Fixes: 26780d9e ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver") Link: https://lore.kernel.org/r/20191022102324.GA27540@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jeff Mahoney authored
commit 394440d4 upstream. Commit 60e4cf67 (reiserfs: fix extended attributes on the root directory) introduced a regression open_xa_root started returning -EOPNOTSUPP but it was not handled properly in reiserfs_for_each_xattr. When the reiserfs module is built without CONFIG_REISERFS_FS_XATTR, deleting an inode would result in a warning and chowning an inode would also result in a warning and then fail to complete. With CONFIG_REISERFS_FS_XATTR enabled, the xattr root would always be present for read-write operations. This commit handles -EOPNOSUPP in the same way -ENODATA is handled. Fixes: 60e4cf67 ("reiserfs: fix extended attributes on the root directory") CC: stable@vger.kernel.org # Commit 60e4cf67 was picked up by stable Link: https://lore.kernel.org/r/20200115180059.6935-1-jeffm@suse.comReported-by:
Michael Brunnbauer <brunni@netestate.de> Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Johannes Berg authored
commit 24953de0 upstream. Check if set_wiphy_params is assigned and return an error if not, some drivers (e.g. virt_wifi where syzbot reported it) don't have it. Reported-by: syzbot+e8a797964a4180eb57d5@syzkaller.appspotmail.com Reported-by: syzbot+34b582cf32c1db008f8e@syzkaller.appspotmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200113125358.ac07f276efff.Ibd85ee1b12e47b9efb00a2adc5cd3fac50da791a@changeidSigned-off-by:
-
Dan Carpenter authored
commit 4a50d454 upstream. The "priv->hw_type" is an enum and in this context GCC will treat it as an unsigned int so the error handling will never trigger. Fixes: a910e4a9 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Nathan Chancellor authored
commit 589b7289 upstream. Clang warns: ../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] nr_parts = PARTS_PER_DISK; ^ ../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here if (err) ^ This is because there is a space at the beginning of this line; remove it so that the indentation is consistent according to the Linux kernel coding style and clang no longer warns. While we are here, the previous line has some trailing whitespace; clean that up as well. Fixes: c80a4209 ("xen-blkfront: handle Xen major numbers other than XENVBD") Link: https://github.com/ClangBuiltLinux/linux/issues/791Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f8d7408a ] lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE bytes in the aggregated packets it builds, but does nothing to prevent large GSO packets being submitted. Pierre-Francois reported various hangs when/if TSO is enabled. For localy generated packets, we can use netif_set_gso_max_size() to limit the size of TSO packets. Note that forwarded packets could still hit the issue, so a complete fix might require implementing .ndo_features_check for this driver, forcing a software segmentation if the size of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
RENARD Pierre-Francois <pfrenard@gmail.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Pengcheng Yang authored
[ Upstream commit e176b1ba ] When the packet pointed to by retransmit_skb_hint is unlinked by ACK, retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue(). If packet loss is detected at this time, retransmit_skb_hint will be set to point to the current packet loss in tcp_verify_retransmit_hint(), then the packets that were previously marked lost but not retransmitted due to the restriction of cwnd will be skipped and cannot be retransmitted. To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can be reset only after all marked lost packets are retransmitted (retrans_out >= lost_out), otherwise we need to traverse from tcp_rtx_queue_head in tcp_xmit_retransmit_queue(). Packetdrill to demonstrate: // Disable RACK and set max_reordering to keep things simple 0 `sysctl -q net.ipv4.tcp_recovery=0` +0 `sysctl -q net.ipv4.tcp_max_reordering=3` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 8 data segments +0 write(4, ..., 8000) = 8000 +0 > P. 1:8001(8000) ack 1 // Enter recovery and 1:3001 is marked lost +.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop> // Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001 +0 > . 1:1001(1000) ack 1 // 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL +.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop> // Now retransmit_skb_hint points to 4001:5001 which is now marked lost // BUG: 2001:3001 was not retransmitted +0 > . 2001:3001(1000) ack 1 Signed-off-by:
Pengcheng Yang <yangpc@wangsu.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Tested-by:
-
Johan Hovold authored
[ Upstream commit 86f3f4cd ] Add missing endpoint sanity check to probe in order to prevent a NULL-pointer dereference (or slab out-of-bounds access) when retrieving the interrupt-endpoint bInterval on ndo_open() in case a device lacks the expected endpoints. Fixes: 40a82917 ("net/usb/r8152: enable interrupt transfer") Cc: hayeswang <hayeswang@realtek.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit ddf42039 ] Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements however up to UCC_MAX_NUM (8) elements are potentially being written to it. Currently we have an array out-of-bounds write error on the last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in size. Addresses-Coverity: ("Out-of-bounds write") Fixes: c19b6d24 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by:
-
Alexander Lobakin authored
[ Upstream commit bd5874da ] DSA subsystem takes care of netdev statistics since commit 4ed70ce9 ("net: dsa: Refactor transmit path to eliminate duplication"), so any accounting inside tagger callbacks is redundant and can lead to messing up the stats. This bug is present in Qualcomm tagger since day 0. Fixes: cafdc45c ("net-next: dsa: add Qualcomm tag RX/TX handler") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Alexander Lobakin <alobakin@dlink.ru> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1712b2ff ] I missed the fact that macvlan_broadcast() can be used both in RX and TX. skb_eth_hdr() makes only sense in TX paths, so we can not use it blindly in macvlan_broadcast() Fixes: 96cc4b69 ("macvlan: do not assume mac_header is set in macvlan_broadcast()") Signed-off-by:
Jurgen Van Ham <juvanham@gmail.com> Tested-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sven Eckelmann authored
commit 4cc4a170 upstream. The distributed arp table is using a DHT to store and retrieve MAC address information for an IP address. This is done using unicast messages to selected peers. The potential peers are looked up using the IP address and the VID. While the IP address is always stored in big endian byte order, this is not the case of the VID. It can (depending on the host system) either be big endian or little endian. The host must therefore always convert it to big endian to ensure that all devices calculate the same peers for the same lookup data. Fixes: be1db4f6 ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Florian Westphal authored
commit 212e7f56 upstream. An earlier commit (1b789577, "netfilter: arp_tables: init netns pointer in xt_tgchk_param struct") fixed missing net initialization for arptables, but turns out it was incomplete. We can get a very similar struct net NULL deref during error unwinding: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77 xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175 cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline] translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587 do_replace net/ipv4/netfilter/arp_tables.c:981 [inline] do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461 Also init the netns pointer in xt_tgdtor_param struct. Fixes: add67461 ("netfilter: add struct net * to target parameters") Reported-by: syzbot+91bdd8eece0f6629ec8b@syzkaller.appspotmail.com Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Cong Wang authored
commit c1209593 upstream. map->members is freed by ip_set_free() right before using it in mtype_ext_cleanup() again. So we just have to move it down. Reported-by: syzbot+4c3cc6dbe7259dbf9054@syzkaller.appspotmail.com Fixes: 40cd63bf ("netfilter: ipset: Support extensions which need a per data destroy function") Acked-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Felix Fietkau authored
commit 81c044fc upstream. The fragments attached to a skb can be part of a compound page. In that case, page_ref_inc will increment the refcount for the wrong page. Fix this by using get_page instead, which calls page_ref_inc on the compound head and also checks for overflow. Fixes: 2b67f944 ("cfg80211: reuse existing page fragments in A-MSDU rx") Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200113182107.20461-1-nbd@nbd.nameSigned-off-by:
-
Dinh Nguyen authored
[ Upstream commit 210de0e9 ] Fix up the correct interrupt numbers for the PMU unit on Agilex and Stratix10. Fixes: 78cd6a9d ("arm64: dts: Add base stratix 10 dtsi") Cc: linux-stable <stable@vger.kernel.org> Reported-by:
Meng Li <Meng.Li@windriver.com> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 42ec15ce ] gcc -O3 warns that some local variables are not properly initialized: drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify': drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized] vdev->args[0] = *a0; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr': drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here u64 a0, a1; ^~ Apparently the code relies on the local variables occupying adjacent memory locations in the same order, but this is of course not guaranteed. Use an array of two u64 variables where needed to make it work correctly. I suspect there is also an endianness bug here, but have not digged in deep enough to be sure. Fixes: 5df6d737 ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA") Fixes: mmtom ("init/Kconfig: enable -O3 for all arches") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 36fe90b0 ] Instead of supplying each byte through stack let's use %pM specifier. Cc: Hiral Patel <hiralpat@cisco.com> Cc: Suma Ramars <sramars@cisco.com> Acked-by:
Tom Tucker <tom@opengridcomputing.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 3018dd3f ] Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
Johan Hovold authored
[ Upstream commit e37d1aed ] Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
John Ogness authored
[ Upstream commit dd1fae52 ] The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Jose Abreu authored
commit b2f3a481 upstream. XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a ("stmmac: Move the STMicroelectronics driver") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
commit 86051317 upstream. The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a ("stmmac: Move the STMicroelectronics driver") Signed-off-by:
-
Wen Yang authored
commit 6d9e8c65 upstream. Patch series "use div64_ul() instead of div_u64() if the divisor is unsigned long". We were first inspired by commit b0ab99e7 ("sched: Fix possible divide by zero in avg_atom () calculation"), then refer to the recently analyzed mm code, we found this suspicious place. 201 if (min) { 202 min *= this_bw; 203 do_div(min, tot_bw); 204 } And we also disassembled and confirmed it: /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 201 0xffffffff811c37da <__wb_calc_thresh+234>: xor %r10d,%r10d 0xffffffff811c37dd <__wb_calc_thresh+237>: test %rax,%rax 0xffffffff811c37e0 <__wb_calc_thresh+240>: je 0xffffffff811c3800 <__wb_calc_thresh+272> /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 202 0xffffffff811c37e2 <__wb_calc_thresh+242>: imul %r8,%rax /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 203 0xffffffff811c37e6 <__wb_calc_thresh+246>: mov %r9d,%r10d ---> truncates it to 32 bits here 0xffffffff811c37e9 <__wb_calc_thresh+249>: xor %edx,%edx 0xffffffff811c37eb <__wb_calc_thresh+251>: div %r10 0xffffffff811c37ee <__wb_calc_thresh+254>: imul %rbx,%rax 0xffffffff811c37f2 <__wb_calc_thresh+258>: shr $0x2,%rax 0xffffffff811c37f6 <__wb_calc_thresh+262>: mul %rcx 0xffffffff811c37f9 <__wb_calc_thresh+265>: shr $0x2,%rdx 0xffffffff811c37fd <__wb_calc_thresh+269>: mov %rdx,%r10 This series uses div64_ul() instead of div_u64() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms. This patch (of 3): The variables 'min' and 'max' are unsigned long and do_div truncates them to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead. Link: http://lkml.kernel.org/r/20200102081442.8273-2-wenyang@linux.alibaba.com Fixes: 693108a8 ("writeback: make bdi->min/max_ratio handling cgroup writeback aware") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jin Yao authored
commit 0feba17b upstream. We observed an issue that was some extra columns displayed after switching perf data file in browser. The steps to reproduce: 1. perf record -a -e cycles,instructions -- sleep 3 2. perf report --group 3. In browser, we use hotkey 's' to switch to another perf.data 4. Now in browser, the extra columns 'Self' and 'Children' are displayed. The issue is setup_sorting() executed again after repeat path, so dimensions are added again. This patch checks the last key returned from __cmd_report(). If it's K_SWITCH_INPUT_DATA, skips the setup_sorting(). Fixes: ad0de097 ("perf report: Enable the runtime switching of perf data file") Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Tested-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.comSigned-off-by:
-
Yuya Fujita authored
commit 55347ec3 upstream. Variable names are inconsistent in hists__for_each macro(). Due to this inconsistency, the macro replaces its second argument with "fmt" regardless of its original name. So far it works because only "fmt" is passed to the second argument. However, this behavior is not expected and should be fixed. Fixes: f0786af5 ("perf hists: Introduce hists__for_each_format macro") Fixes: aa6f50af ("perf hists: Introduce hists__for_each_sort_list macro") Signed-off-by:
Yuya Fujita <fujita.yuya@fujitsu.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB1588.jpnprd01.prod.outlook.comSigned-off-by:
-
Ard Biesheuvel authored
commit 4911ee40 upstream. The EFI mixed mode entry code goes through the ordinary startup_32() routine before jumping into the kernel's EFI boot code in 64-bit mode. The 32-bit startup code must be entered with paging disabled, but this is not documented as a requirement for the EFI handover protocol, and so we should disable paging explicitly when entering the kernel from 32-bit EFI firmware. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Cc: <stable@vger.kernel.org> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191224132909.102540-4-ardb@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Keiya Nobuta authored
commit 9c06ac4c upstream. If hub_activate() is called before D+ has stabilized after remote wakeup, the following situation might occur: __ ___________________ / \ / D+ __/ \__/ Hub _______________________________ | ^ ^ ^ | | | | Host _____v__|___|___________|______ | | | | | | | \-- Interrupt Transfer (*3) | | \-- ClearPortFeature (*2) | \-- GetPortStatus (*1) \-- Host detects remote wakeup - D+ goes high, Host starts running by remote wakeup - D+ is not stable, goes low - Host requests GetPortStatus at (*1) and gets the following hub status: - Current Connect Status bit is 0 - Connect Status Change bit is 1 - D+ stabilizes, goes high - Host requests ClearPortFeature and thus Connect Status Change bit is cleared at (*2) - After waiting 100 ms, Host starts the Interrupt Transfer at (*3) - Since the Connect Status Change bit is 0, Hub returns NAK. In this case, port_event() is not called in hub_event() and Host cannot recognize device. To solve this issue, flag change_bits even if only Connect Status Change bit is 1 when got in the first GetPortStatus. This issue occurs rarely because it only if D+ changes during a very short time between GetPortStatus and ClearPortFeature. However, it is fatal if it occurs in embedded system. Signed-off-by:
Keiya Nobuta <nobuta.keiya@fujitsu.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200109051448.28150-1-nobuta.keiya@fujitsu.comSigned-off-by:
-
Dan Carpenter authored
commit 28d76df1 upstream. Tom Hatskevich reported that we look up "iocp" then, in the called functions we do a second copy_from_user() and look it up again. The problem that could cause is: drivers/message/fusion/mptctl.c 674 /* All of these commands require an interrupt or 675 * are unknown/illegal. 676 */ 677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) ^^^^ We take this lock. 678 return ret; 679 680 if (cmd == MPTFWDOWNLOAD) 681 ret = mptctl_fw_download(arg); ^^^ Then the user memory changes and we look up "iocp" again but a different one so now we are holding the incorrect lock and have a race condition. 682 else if (cmd == MPTCOMMAND) 683 ret = mptctl_mpt_command(arg); The security impact of this bug is not as bad as it could have been because these operations are all privileged and root already has enormous destructive power. But it's still worth fixing. This patch passes the "iocp" pointer to the functions to avoid the second lookup. That deletes 100 lines of code from the driver so it's a nice clean up as well. Link: https://lore.kernel.org/r/20200114123414.GA7957@kadamReported-by:
Tom Hatskevich <tom2001tom.23@gmail.com> Reviewed-by:
-
Johan Hovold authored
commit 9715a43e upstream. Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> # 3.5 Reviewed-by:
-
Johan Hovold authored
commit 1568c58d upstream. The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
Johan Hovold authored
commit 4d5ef53f upstream. Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea4 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reviewed-by:
-
Johan Hovold authored
commit fdb838ef upstream. USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
