- 04 Dec, 2013 40 commits
-
-
Greg Kroah-Hartman authored
-
Nanno Langstraat authored
commit 43c83146 upstream. Use case: people who use both Apple and PC keyboards regularly, and desire to keep&use their PC muscle memory. A particular use case: an Apple compact external keyboard connected to a PC laptop. (This use case can't be covered well by X.org key remappings etc.) Signed-off-by:
Nanno Langstraat <langstr@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tristan Rice authored
commit e17f5d76 upstream. This is a patch that adds the new Mayflash Gamecube Controller to USB adapter (ID 1a34:f705 ACRUX) to the ACRUX driver (drivers/hid/hid-axff.c) with full force feedback support. Signed-off-by:
Tristan Rice <rice@outerearth.net> Signed-off-by:
-
Anders F. U. Kiær authored
commit f1a4914b upstream. Added id, bindings and comments for Holtek USB ID 04d9:a072 LEETGION Hellion Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a067. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by:
Anders F. U. Kiær <ablacksheep@gmail.com> Signed-off-by:
-
Stefan Achatz authored
commit e078809d upstream. Forgot two special driver declarations and sorted the list. Signed-off-by:
Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by:
-
Stefan Achatz authored
commit 7be63f20 upstream. Add missing switch breaks. Signed-off-by:
-
Stefan Achatz authored
commit 14fc4290 upstream. Ryos uses a new return value for critical errors, others have been confirmed. Signed-off-by:
-
David Howells authored
commit 124df926 upstream. Remove the certificate date checks that are performed when a certificate is parsed. There are two checks: a valid from and a valid to. The first check is causing a lot of problems with system clocks that don't keep good time and the second places an implicit expiry date upon the kernel when used for module signing, so do we really need them? Signed-off-by:
David Howells <dhowells@redhat.com> cc: David Woodhouse <dwmw2@infradead.org> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Josh Boyer <jwboyer@redhat.com> cc: Alexander Holler <holler@ahsoftware.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 9736a89d upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/s5h1420.c:851:1: warning: 's5h1420_tuner_i2c_tuner_xfer' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. In the specific case of this frontend, only ttpci uses it. The maximum number of messages there is two, on I2C read operations. As the logic can add an extra operation, change the size to 3. Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 8393796d upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/itd1000.c:69:1: warning: 'itd1000_write_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/mt312.c:126:1: warning: 'mt312_write' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/nxt200x.c:111:1: warning: 'nxt200x_writebytes' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stb6100.c:216:1: warning: 'stb6100_write_reg_range.constprop.3' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110.c:98:1: warning: 'stv6110_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110x.c:85:1: warning: 'stv6110x_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda18271c2dd.c:147:1: warning: 'WriteRegs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/zl10039.c:119:1: warning: 'zl10039_write' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 37ebaf68 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit ba474642 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/stb0899_drv.c:540:1: warning: 'stb0899_write_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 9aca4fb0 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/stv0367.c:791:1: warning: 'stv0367_writeregs.constprop.4' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit f7a35df1 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/stv090x.c:750:1: warning: 'stv090x_write_regs.constprop.6' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit f1baab87 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 56ac0337 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/tuner-xc2028.c:651:1: warning: 'load_firmware' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. In the specific case of this driver, the maximum limit is 80, used only on tm6000 driver. This limit is due to the size of the USB control URBs. Ok, it would be theoretically possible to use a bigger size on PCI devices, but the firmware load time is already good enough. Anyway, if some usage requires more, it is just a matter of also increasing the buffer size at load_firmware(). Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 24e9a47e upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/v4l2-core/v4l2-async.c:238:1: warning: 'v4l2_async_notifier_unregister' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. In this specific case, there's a hard limit imposed by V4L2_MAX_SUBDEVS, with is currently 128. That means that the buffer size can be up to 128x8 = 1024 bytes (on a 64bits kernel), with is too big for stack. Worse than that, someone could increase it and cause real troubles. So, let's use dynamically allocated data, instead. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit ac5b4b6b upstream. Dynamic static allocation is evil, as Kernel stack is too low, and ompilation complains about it on some archs: drivers/staging/media/lirc/lirc_zilog.c:967:1: warning: 'read' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be 64. That should be more than enough. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 1d212cf0 upstream. drivers/media/pci/cx18/cx18-driver.c: In function 'cx18_read_eeprom': drivers/media/pci/cx18/cx18-driver.c:357:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] That happens because the routine allocates 256 bytes for an eeprom buffer, plus the size of struct i2c_client, with is big. Change the logic to dynamically allocate/deallocate space for struct i2c_client, instead of using the stack. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 278ba83a upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/pci/cx23885/cimax2.c:149:1: warning: 'netup_write_i2c' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 5bf30b3b upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/pci/ttpci/av7110_hw.c:510:1: warning: 'av7110_fw_cmd' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. In the specific case of this driver, the maximum fw command size is 6 + 2, as checked using: $ git grep -A1 av7110_fw_cmd drivers/media/pci/ttpci/ So, use 8 for the buffer size. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 64f7ef8a upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb/cxusb.c:209:1: warning: 'cxusb_i2c_xfer' uses dynamic stack allocation [enabled by default] drivers/media/usb/dvb-usb/cxusb.c:69:1: warning: 'cxusb_ctrl_msg' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be the max size of a control URB payload data (64 bytes). Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 1d7fa359 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb/dibusb-common.c:124:1: warning: 'dibusb_i2c_msg' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be the max size of a control URB payload data (64 bytes). Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 0065a79a upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb/dw2102.c:368:1: warning: 'dw2102_earda_i2c_transfer' uses dynamic stack allocation [enabled by default] drivers/media/usb/dvb-usb/dw2102.c:449:1: warning: 'dw2104_i2c_transfer' uses dynamic stack allocation [enabled by default] drivers/media/usb/dvb-usb/dw2102.c:512:1: warning: 'dw3101_i2c_transfer' uses dynamic stack allocation [enabled by default] drivers/media/usb/dvb-usb/dw2102.c:621:1: warning: 's6x0_i2c_transfer' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be the max size of a control URB payload data (64 bytes). Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 65e2f1cb upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb-v2/af9015.c:433:1: warning: 'af9015_eeprom_hash' uses dynamic stack allocation [enabled by default] In this specific case, it is a gcc bug, as the size is a const, but it is easy to just change it from const to a #define, getting rid of the gcc warning. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 7760e148 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb-v2/af9035.c:142:1: warning: 'af9035_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/usb/dvb-usb-v2/af9035.c:305:1: warning: 'af9035_i2c_master_xfer' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be the max size of a control URB payload data (64 bytes). Signed-off-by:
-
Mauro Carvalho Chehab authored
commit c98300a0 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb-v2/mxl111sf.c:74:1: warning: 'mxl111sf_ctrl_msg' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be the max size of a control URB payload data (64 bytes). Signed-off-by:
-
Alex Deucher authored
commit 4cc948b9 upstream. If we fail to allocate an indirect buffer (ib) when updating the ptes, return an error instead of trying to use the ib. Avoids a null pointer dereference. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=58621 v2 (chk): rebased on drm-fixes-3.12 for stable inclusion Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Linus Walleij authored
commit 2ba3154d upstream. The PL061 driver had the irqdomain initialization in an unfortunate place: when used with device tree (and thus passing the base IRQ 0) the driver would work, as this registers an irqdomain and waits for mappings to be done dynamically as the devices request their IRQs, whereas when booting using platform data the irqdomain core would attempt to allocate IRQ descriptors dynamically (which works fine) but also to associate the irq_domain_associate_many() on all IRQs, which in turn will call the mapping function which at this point will try to set the type of the IRQ and then tries to acquire a non-initialized spinlock yielding a backtrace like this: CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc1+ #652 Backtrace: [<c0016f0c>] (dump_backtrace) from [<c00172ac>] (show_stack+0x18/0x1c) r6:c798ace0 r5:00000000 r4:c78257e0 r3:00200140 [<c0017294>] (show_stack) from [<c0329ea0>] (dump_stack+0x20/0x28) [<c0329e80>] (dump_stack) from [<c004fa80>] (__lock_acquire+0x1c0/0x1b80) [<c004f8c0>] (__lock_acquire) from [<c0051970>] (lock_acquire+0x6c/0x80) r10:00000000 r9:c0455234 r8:00000060 r7:c047d798 r6:600000d3 r5:00000000 r4:c782c000 [<c0051904>] (lock_acquire) from [<c032e484>] (_raw_spin_lock_irqsave+0x60/0x74) r6:c01a1100 r5:800000d3 r4:c798acd0 [<c032e424>] (_raw_spin_lock_irqsave) from [<c01a1100>] (pl061_irq_type+0x28/0x) r6:00000000 r5:00000000 r4:c798acd0 [<c01a10d8>] (pl061_irq_type) from [<c0059ef4>] (__irq_set_trigger+0x70/0x104) r6:00000000 r5:c01a10d8 r4:c046da1c r3:c01a10d8 [<c0059e84>] (__irq_set_trigger) from [<c005b348>] (irq_set_irq_type+0x40/0x60) r10:c043240c r8:00000060 r7:00000000 r6:c046da1c r5:00000060 r4:00000000 [<c005b308>] (irq_set_irq_type) from [<c01a1208>] (pl061_irq_map+0x40/0x54) r6:c79693c0 r5:c798acd0 r4:00000060 [<c01a11c8>] (pl061_irq_map) from [<c005d27c>] (irq_domain_associate+0xc0/0x190) r5:00000060 r4:c046da1c [<c005d1bc>] (irq_domain_associate) from [<c005d604>] (irq_domain_associate_man) r8:00000008 r7:00000000 r6:c79693c0 r5:00000060 r4:00000000 [<c005d5d0>] (irq_domain_associate_many) from [<c005d864>] (irq_domain_add_simp) r8:c046578c r7:c035b72c r6:c79693c0 r5:00000060 r4:00000008 r3:00000008 [<c005d814>] (irq_domain_add_simple) from [<c01a1380>] (pl061_probe+0xc4/0x22c) r6:00000060 r5:c0464380 r4:c798acd0 [<c01a12bc>] (pl061_probe) from [<c01c0450>] (amba_probe+0x74/0xe0) r10:c043240c r9:c0455234 r8:00000000 r7:c047d7f8 r6:c047d744 r5:00000000 r4:c0464380 This moves the irqdomain initialization to a point where the spinlock and GPIO chip are both fully propulated, so the callbacks can be used without crashes. I had some problem reproducing the crash, as the devm_kzalloc():ed zeroed memory would seemingly mask the spinlock as something OK, but by poisoning the lock like this: u32 *dum; dum = (u32 *) &chip->lock; *dum = 0xaaaaaaaaU; I could reproduce, fix and test the patch. Reported-by:
Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Simon Wood authored
commit 7f505470 upstream. By default the Logitech Formula Vibration presents a combined accel/brake axis ('Y'). This patch modifies the HID descriptor to present seperate accel/brake axes ('Y' and 'Z'). Signed-off-by:
Simon Wood <simon@mungewell.org> Signed-off-by:
-
Simon Wood authored
commit d2c02da5 upstream. When the autocenter is set to zero, this patch issues a command to totally disable the autocenter - this results in less resistance in the wheel. Reported-by:
Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by:
-
Simon Wood authored
commit f8c23156 upstream. Adjust the scaling and lineartity to match that of the Windows driver (from MOMO testing). Reported-by:
-
KaiChung Cheng authored
commit bf9d121e upstream. This patch adds PID VID to support for the Wistron Inc. Optical touch panel. Signed-off-by:
KaiChung Cheng <kenny_cheng@wistron.com> Signed-off-by:
-
Srinivas Pandruvada authored
commit d4b1bba7 upstream. Most of the hid sensor field size is reported in report_size field in the report descriptor. For rotation fusion sensor the quaternion data is 16 byte field, the report size was set to 4 and report count field is set to 4. So the total size is 16 bytes. But the current driver has a bug and not taking account for report count field. This causes user space to see only 4 bytes of data sent via IIO interface. The number of bytes in a field needs to take account of report_count field. Need to multiply report_size and report_count to get total number of bytes. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Forest Bond authored
commit a6802e00 upstream. Add support for SiS multitouch panels. Signed-off-by:
Forest Bond <forest.bond@rapidrollout.com> Signed-off-by:
-
Elias Vanderstuyft authored
commit bd04363d upstream. Add USB IDs for Logitech Formula Vibration Feedback Wheel (046d:ca04). The lg2ff force feedback subdriver is used for vibration and HID_GD_MULTIAXIS is set to avoid deadzone like other Logitech wheels. Kconfig description etc are also updated accordingly. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
-
Luosong authored
commit 7b226292 upstream. GeneralTouch products should use the quirk SLOT_IS_CONTACTID instead of SLOT_IS_CONTACTNUMBER. Adding PIDs 0101,e100,0102,0106,010a from the new products. Tested on new and older products by GeneralTouch engineers. Signed-off-by:
Luosong <android@generaltouch.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Steven Whitehouse authored
commit ea0341e0 upstream. In the case that atomic_open calls finish_no_open() with the dentry that was supplied to gfs2_atomic_open() an extra reference count is required. This patch fixes that issue preventing a bug trap triggering at umount time. Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
-
Kuninori Morimoto authored
commit 357002b9 upstream. afa2c940 ("sh: ecovec24: Use MMC/SDHI CD and RO GPIO") added .tmio_flags = TMIO_MMC_USE_GPIO_CD on sh_mobile_sdhi_info, but it needs <linux/mfd/tmio.h> header. This patch adds it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Mark Langsdorf authored
commit fbbc5bfb upstream. Calxeda's new ECX-2000 part uses the same cpufreq interface as highbank, so add it to the driver's compatibility list. This is a minor change that can safely be applied to the 3.10 and 3.11 stable trees. Signed-off-by:
Mark Langsdorf <mark.langsdorf@calxeda.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
