- 12 Oct, 2008 40 commits
-
-
Oliver Endriss authored
Support Fujitsu-Siemens Activy DVB-T card rev AL (ALPS TDHD1-204A tuner). Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Alexander Beregalov authored
v4l: replace __FUNCTION__ with __func__ Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Jean Delvare authored
When the input is set to tuner and no antenna is connected, the BT848 can flood VPRES interrupts. So we don't want to enable this type of interrupts when the input it set to tuner. As we don't do anything when receiving such an interrupt anyway, the easiest fix is to simply not unmask this specific interrupt. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Patrick Boettcher authored
Reactivated dummy frontend driver which is extremely useful for debugging. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Signed-off-by:
-
Hans Verkuil authored
Replace the old register_chrdev with the more flexible register_chrdev_region. Ensure that the release() is called when the very last chardev usage was released, and not when the sysfs devices were removed. This should simplify hotpluggable drivers considerably. Tested-by:
Mike Isely <isely@isely.net> Tested-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
David Ellingsworth <david@identd.dyndns.org> Reviewed-by:
Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Laurent Pinchart authored
V4L/DVB (8847): uvcvideo: Add support for a Bison Electronics webcam found in the Fujitsu Amilo SI2636. Signed-off-by:
-
Laurent Pinchart authored
Pass the payload size instead of the header size to uvc_video_decode_end() to avoid generating an extra trace message for each frame. Signed-off-by:
-
Dean Anderson authored
adds VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP ioctls for controlling JPEG compression quality. Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
David Howells authored
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
James Morris <jmorris@namei.org> Acked-by:
Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Steven Toth authored
This patch is on behalf of Stephen Backway <stev391@email.com>, and represents two patches I received (and some subsequent whitespace cleanup I had due to how I pulled the patches). From the original author: a) Add DVB support for the Leadtek Winfast PxDVR3200 H. b) The tuner callback previously checked the command 3 times: 1) To see if it was the XC2028_RESET_CLK 2) To see if it was not the XC2028_RESET_TUNER 3) To see if it was the XC2028_RESET_TUNER This patch removes the third check. Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
Stephen Backway <stev391@email.com> Signed-off-by:
-
Harvey Harrison authored
drivers/media/video/mt9m111.c:758:5: warning: symbol 'mt9m111_restore_state' was not declared. Should it be static? New warning in next-20080825 Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Dmitry Belimov authored
A simple state machine was added to saa7134_ts. It has three states: SAA7134_TS_STOPPED SAA7134_TS_BUFF_DONE SAA7134_TS_STARTED When buffer_setup is run we start the TS initialization: set SAA7134_TS_STOPPED. When all buffers are prepared we write data into DMA register and set SAA7134_TS_BUFF_DONE. When the first buffer is active start TS and set SAA7134_TS_STARTED. When ts_release is called stop TS and set SAA7134_TS_STOPPED. Signed-off-by:Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Dmitry Belimov authored
SAA7134_IRQ1_INTE_RA2_3 and SAA7134_IRQ1_INTE_RA2_2 are used for planar video, not for TS. Signed-off-by:
-
Dmitry Belimov authored
Additional code to improve the init sequence and add board type tests were done by Hans Verkuil. Signed-off-by:
-
Hans Verkuil authored
The driver_data field of the device structure was zeroed, thus losing this information. Many drivers set this up before calling video_device_register, so we have to ensure that it isn't lost. Signed-off-by:
-
Hans Verkuil authored
Use the new video_drvdata(filp) function where it is safe to do so. Signed-off-by:
-
Hans Verkuil authored
Cleanup v4l2-dev.[ch], add/improve comments and add a new helper function: video_drvdata() that can get the private driver data from a file struct. Signed-off-by:
-
Hans Verkuil authored
Remove the priv field and let video_get/set_drvdata use dev_get_drvdata and dev_set_drvdata instead. Convert all drivers that still used priv directly. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Now that all drivers set the release callback in the video_device struct we can put in a BUG_ON in video_register_device to ensure that the callback is always there. Signed-off-by:
-
Hans Verkuil authored
All drivers that call video_device_register where checked to see if they set the release callback of struct video_device. Where that callback was missing it was added. Signed-off-by:
-
Hans Verkuil authored
Add a second release function: video_device_release_empty It can be used by drivers that have statically allocated video_device structs. Its use usually, but not always, indicates laziness on the part of the driver programmer. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Handle the video_exclusive_open/release functionality inside the driver. Signed-off-by:
-
Hans Verkuil authored
Move the video_exclusive_open/release functionality into the driver itself. Signed-off-by:
-
Hans Verkuil authored
Move the video_exclusive_open/release functionality into the driver itself. Signed-off-by:
-
Andy Walls authored
cx18: Have CX23418 release buffers at end of capture. The CX23418 reuses task handles so we need to have it release the buffers associated with a task handle at the end of a capture. If we don't, buffer ids used for one type of stream in the driver (MPEG, TS, PCM), could be used for another type of stream by the CX23418, if a previously used handle is assigned to a different type of stream. The driver would drop valid buffers when this happened. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
cx18: Fix cx18_find_handle() and add error checking. cx18_find_handle() did not find a good task handle and would use the invalid task handle under common conditions. Added a define for the invalid task handle and added error checking as well. Signed-off-by:
-
Andy Walls authored
cx18: Convert cx18_queue buffers member to atomic_t. This allows safe concurrent access to check if a queue has data without having to acquire the queue spinlock. Signed-off-by:
-
Andy Walls authored
cx18: Remove redundant struct cx18_queue length member. It can be trivially computed from queue->buffers * stream->buf_size, if ever really needed. Signed-off-by:
-
Andy Walls authored
cx18: get rid of ununsed buffers stolen field. It's an unused holdover from ivtv. Signed-off-by:
-
Laurent Pinchart authored
When a suspended device has been reset instead of being resumed, USB core calls the reset_resume method if available instead of unbinding and rebinding the device. This patch implements reset_resume by reusing the current resume implementation and simplifies the resume method by skipping the controls restore stage. Resuming from autosuspend should be faster. Signed-off-by:
-
Dean Anderson authored
Fix for reloading firmware when removing and reloading driver Handshaking for firmware loading and changing modes. Removes the restriction of one user per channel at a time. JPEG capture mode added. Signed-off-by:
-
Henrik Kretzschmar authored
Better check the video_device pointer before using it. Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by:
-
Henrik Kretzschmar authored
The return vaule of the probe function should return -ENOMEM instead of -EBUSY if video_device_alloc() fails. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
