- 22 Jan, 2019 1 commit
-
-
Florian Westphal authored
Stephen Rothwell reports: After merging the netfilter-next tree, today's linux-next build (powerpc ppc64_defconfig) failed like this: ERROR: "nf_conntrack_invert_icmpv6_tuple" [nf_conntrack.ko] undefined! ERROR: "nf_conntrack_icmpv6_packet" [nf_conntrack.ko] undefined! ERROR: "nf_conntrack_icmpv6_init_net" [nf_conntrack.ko] undefined! ERROR: "icmpv6_pkt_to_tuple" [nf_conntrack.ko] undefined! ERROR: "nf_ct_gre_keymap_destroy" [nf_conntrack.ko] undefined! icmpv6 related errors are due to lack of IS_ENABLED(CONFIG_IPV6) (no icmpv6 support is builtin if kernel has CONFIG_IPV6=n), the nf_ct_gre_keymap_destroy error is due to lack of PROTO_GRE check. Fixes: a47c5404 ("netfilter: conntrack: handle builtin l4proto packet functions via direct calls") Fixes: e2e48b47 ("netfilter: conntrack: handle icmp pkt_to_tuple helper via direct calls") Fixes: 197c4300 ("netfilter: conntrack: remove invert_tuple callback") Fixes: 2a389de8 ("netfilter: conntrack: remove l4proto init and get_net callbacks") Fixes: e5689435 ("netfilter: conntrack: remove l4proto destroy hook") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 18 Jan, 2019 39 commits
-
-
Laura Garcia Liebana authored
A better way to implement this from userspace has been found without specific code in the kernel side, revert this. Fixes: b9ccc07e ("netfilter: nft_hash: add map lookups for hashing operations") Signed-off-by:
Laura Garcia Liebana <nevola@gmail.com> Signed-off-by:
-
Florian Westphal authored
Not used since 203f2e78 ("netfilter: nat: remove l4proto->unique_tuple") Signed-off-by:
-
wenxu authored
In the ip_rcv the skb goes through the PREROUTING hook first, then kicks in vrf device and go through the same hook again. When conntrack dnat works with vrf, there will be some conflict with rules because the packet goes through the hook twice with different nf status. ip link add user1 type vrf table 1 ip link add user2 type vrf table 2 ip l set dev tun1 master user1 ip l set dev tun2 master user2 nft add table firewall nft add chain firewall zones { type filter hook prerouting priority - 300 \; } nft add rule firewall zones counter ct zone set iif map { "tun1" : 1, "tun2" : 2 } nft add chain firewall rule-1000-ingress nft add rule firewall rule-1000-ingress ct zone 1 tcp dport 22 ct state new counter accept nft add rule firewall rule-1000-ingress counter drop nft add chain firewall rule-1000-egress nft add rule firewall rule-1000-egress tcp dport 22 ct state new counter drop nft add rule firewall rule-1000-egress counter accept nft add chain firewall rules-all { type filter hook prerouting priority - 150 \; } nft add rule firewall rules-all ip daddr vmap { "2.2.2.11" : jump rule-1000-ingress } nft add rule firewall rules-all ct zone vmap { 1 : jump rule-1000-egress } nft add rule firewall dnat-all ct zone vmap { 1 : jump dnat-1000 } nft add rule firewall dnat-1000 ip daddr 2.2.2.11 counter dnat to 10.0.0.7 For a package with ip daddr 2.2.2.11 and tcp dport 22, first time accept in the rule-1000-ingress and dnat to 10.0.0.7. Then second time the packet goto the wrong chain rule-1000-egress which leads the packet drop With this patch, userspace can add the 'don't re-do entire ruleset for vrf' policy itself via: nft add rule firewall rules-all meta iifkind "vrf" counter accept Signed-off-by:wenxu <wenxu@ucloud.cn> Signed-off-by:
-
Pablo Neira Ayuso authored
The connection tracking hooks can be optionally registered per netns when conntrack is specifically invoked from the ruleset since 0c66dc1e ("netfilter: conntrack: register hooks in netns when needed by ruleset"). Then, since 4d3a57f2 ("netfilter: conntrack: do not enable connection tracking unless needed"), the default behaviour is changed to always register them on demand. This patch provides a toggle that allows users to always register them. Without this toggle, in order to use conntrack for statistics collection, you need a dummy rule that refers to conntrack, eg. iptables -I INPUT -m state --state NEW This patch allows users to restore the original behaviour via modparam, ie. always register connection tracking, eg. modprobe nf_conntrack enable_hooks=1 Hence, no dummy rule is required. Reported-by:
-
Florian Westphal authored
Its now same as __nf_ct_l4proto_find(), so rename that to nf_ct_l4proto_find and use it everywhere. It never returns NULL and doesn't need locks or reference counts. Before this series: 302824 net/netfilter/nf_conntrack.ko 21504 net/netfilter/nf_conntrack_proto_gre.ko text data bss dec hex filename 6281 1732 4 8017 1f51 nf_conntrack_proto_gre.ko 108356 20613 236 129205 1f8b5 nf_conntrack.ko After: 294864 net/netfilter/nf_conntrack.ko text data bss dec hex filename 106979 19557 240 126776 1ef38 nf_conntrack.ko so, even with builtin gre, total size got reduced. Signed-off-by:
-
Florian Westphal authored
Only one user (gre), add a direct call and remove this facility. Signed-off-by:
-
Florian Westphal authored
Those were needed we still had modular trackers. As we don't have those anymore, prefer direct calls and remove all the (un)register infrastructure associated with this. Signed-off-by:
-
Florian Westphal authored
After previous patch these are not used anymore. Signed-off-by:
-
Florian Westphal authored
Due to historical reasons, all l4 trackers register their own sysctls. This leads to copy&pasted boilerplate code, that does exactly same thing, just with different data structure. Place all of this in a single file. This allows to remove the various ctl_table pointers from the ct_netns structure and reduces overall code size. Signed-off-by:
-
Florian Westphal authored
after removal of the packet and invert function pointers, several places do not need to lookup the l4proto structure anymore. Remove those lookups. The function nf_ct_invert_tuplepr becomes redundant, replace it with nf_ct_invert_tuple everywhere. Signed-off-by:
-
Florian Westphal authored
No used anymore. Signed-off-by:
-
Florian Westphal authored
Now that all l4trackers are builtin, no need to use a mix of direct and indirect calls. This removes the last two users: gre and the generic l4 protocol tracker. Signed-off-by:
-
Florian Westphal authored
No need to get/put module owner reference, none of these can be removed anymore. Signed-off-by:
-
Florian Westphal authored
Only used by icmp(v6). Prefer a direct call and remove this function from the l4proto struct. Signed-off-by:
-
Florian Westphal authored
GRE is now builtin, so we can handle it via direct call and remove the callback. Signed-off-by:
-
Florian Westphal authored
No users anymore. Signed-off-by:
-
Florian Westphal authored
This makes the last of the modular l4 trackers 'bool'. After this, all infrastructure to handle dynamic l4 protocol registration becomes obsolete and can be removed in followup patches. Old: 302824 net/netfilter/nf_conntrack.ko 21504 net/netfilter/nf_conntrack_proto_gre.ko New: 313728 net/netfilter/nf_conntrack.ko Old: text data bss dec hex filename 6281 1732 4 8017 1f51 nf_conntrack_proto_gre.ko 108356 20613 236 129205 1f8b5 nf_conntrack.ko New: 112095 21381 240 133716 20a54 nf_conntrack.ko The size increase is only temporary. Signed-off-by:
-
Florian Westphal authored
We can use gre. Lock is only needed when a new expectation is added. In case a single spinlock proves to be problematic we can either add one per netns or use an array of locks combined with net_hash_mix() or similar to pick the 'correct' one. But given this is only needed for an expectation rather than per packet a single one should be ok. Signed-off-by:
-
Florian Westphal authored
rather than handling them via indirect call, use a direct one instead. This leaves GRE as the last user of this indirect call facility. Signed-off-by:
-
Florian Westphal authored
The l4 protocol trackers are invoked via indirect call: l4proto->packet(). With one exception (gre), all l4trackers are builtin, so we can make .packet optional and use a direct call for most protocols. Signed-off-by:
-
Phil Sutter authored
To allow for a batch to contain rules in arbitrary ordering, introduce NFTA_RULE_POSITION_ID attribute which works just like NFTA_RULE_POSITION but contains the ID of another rule within the same batch. This helps iptables-nft-restore handling dumps with mixed insert/append commands correctly. Note that NFTA_RULE_POSITION takes precedence over NFTA_RULE_POSITION_ID, so if the former is present, the latter is ignored. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Florian Westphal authored
Following command: iptables -D FORWARD -m physdev ... causes connectivity loss in some setups. Reason is that iptables userspace will probe kernel for the module revision of the physdev patch, and physdev has an artificial dependency on br_netfilter (xt_physdev use makes no sense unless a br_netfilter module is loaded). This causes the "phydev" module to be loaded, which in turn enables the "call-iptables" infrastructure. bridged packets might then get dropped by the iptables ruleset. The better fix would be to change the "call-iptables" defaults to 0 and enforce explicit setting to 1, but that breaks backwards compatibility. This does the next best thing: add a request_module call to checkentry. This was a stray '-D ... -m physdev' won't activate br_netfilter anymore. Signed-off-by:
-
Florian Westphal authored
place them into the confirm one. Old: hook (300): ipv4/6_help() first call helper, then seqadj. hook (INT_MAX): confirm Now: hook (INT_MAX): confirm, first call helper, then seqadj, then confirm Not having the extra call is noticeable in bechmarks. Signed-off-by:
-
Florian Westphal authored
With CONFIG_RETPOLINE its faster to add an if (ptr == &foo_func) check and and use direct calls for all the built-in expressions. ~15% improvement in pathological cases. checkpatch doesn't like the X macro due to the embedded return statement, but the macro has a very limited scope so I don't think its a problem. I would like to avoid bugs of the form If (e->ops->eval == (unsigned long)nft_foo_eval) nft_bar_eval(); and open-coded if ()/else if()/else cascade, thus the macro. Signed-off-by:
-
Florian Westphal authored
Instead of linear search, use rhlist interface to look up the objects. This fixes rulesets with thousands of named objects (quota, counters and the like). We only use a single table for this and consider the address of the table we're doing the lookup in as a part of the key. This reduces restore time of a sample ruleset with ~20k named counters from 37 seconds to 0.8 seconds. Signed-off-by:
-
Florian Westphal authored
Add a 'key' structure for object, so we can look them up by name + table combination (the name can be the same in each table). Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: remove code from tcp_create_openreq_child() tcp_create_openreq_child() is essentially cloning a listener, then must initialize some fields that can not be inherited. Listeners are either fresh sockets, or sockets that came through tcp_disconnect() after a session that dirtied many fields. By moving code to tcp_disconnect(), we can shorten time taken to create a clone, since tcp_disconnect() operation is very unlikely. ==================== Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If we make sure all listeners have these fields cleared, then a clone will also inherit zero values. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
If we make sure all listeners have proper tp->rack value, then a clone will also inherit proper initial value. Note that fresh sockets init tp->rack from tcp_init_sock() Signed-off-by:
-
Eric Dumazet authored
If we make sure all listeners have app_limited set to ~0U, then a clone will also inherit proper initial value. Signed-off-by:
-
Eric Dumazet authored
If we make sure all listeners have these fields cleared, then a clone will also inherit zero values. Signed-off-by:
-
Eric Dumazet authored
All listeners have this field cleared already, since tcp_disconnect() clears it and newly created sockets have also a zero value here. So a clone will inherit a zero value here. Signed-off-by:
-
Eric Dumazet authored
Passive connections can inherit proper value by cloning, if we make sure all listeners have the proper values there. tcp_disconnect() was setting snd_cwnd to 2, which seems quite obsolete since IW10 adoption. Also remove an obsolete comment. Signed-off-by:
-
Eric Dumazet authored
If we make sure a listener always has its mdev_us field set to TCP_TIMEOUT_INIT, we do not need to rewrite this field after a new clone is created. tcp_disconnect() is very seldom used in real applications. Signed-off-by:
-
Eric Dumazet authored
All listeners have this field cleared already, since tcp_disconnect() clears it and newly created sockets have also a zero value here. So a clone will inherit a zero value here. Signed-off-by:
-
Eric Dumazet authored
New sockets have this field cleared, and tcp_disconnect() calls tcp_write_queue_purge() which among other things also clear tp->packets_out So a listener is guaranteed to have this field cleared. Signed-off-by:
-
Eric Dumazet authored
If we make sure a listener always has its icsk_rto field set to TCP_TIMEOUT_INIT, we do not need to rewrite this field after a new clone is created. tcp_disconnect() is very seldom used in real applications. Signed-off-by:
-
Eric Dumazet authored
New sockets get the field set to TCP_INFINITE_SSTHRESH in tcp_init_sock() In case a socket had this field changed and transitions to TCP_LISTEN state, tcp_disconnect() also makes sure snd_ssthresh is set to TCP_INFINITE_SSTHRESH. So a listener has this field set to TCP_INFINITE_SSTHRESH already. Signed-off-by:
-
YueHaibing authored
Remove unneeded semicolon. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
