- 01 Oct, 2020 40 commits
-
-
Yu Chen authored
[ Upstream commit 1c0e69ae ] If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk for function, as suspend_clk is slow so EP command need more time to complete, e.g, imx8M suspend_clk is 32K, set ep configuration will take about 380us per below trace time stamp(44.286278 - 44.285897 = 0.000381): configfs_acm.sh-822 [000] d..1 44.285896: dwc3_writel: addr 000000006d59aae1 value 00000401 configfs_acm.sh-822 [000] d..1 44.285897: dwc3_readl: addr 000000006d59aae1 value 00000401 ... ... configfs_acm.sh-822 [000] d..1 44.286278: dwc3_readl: addr 000000006d59aae1 value 00000001 configfs_acm.sh-822 [000] d..1 44.286279: dwc3_gadget_ep_cmd: ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000 00000500 00000000 --> status: Successful This was originally found on Hisilicon Kirin Soc that need more time for the device controller to clear the CmdAct of DEPCMD. Signed-off-by:
Yu Chen <chenyu56@huawei.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shreyas Joshi authored
[ Upstream commit 48021f98 ] If uboot passes a blank string to console_setup then it results in a trashed memory. Ultimately, the kernel crashes during freeing up the memory. This fix checks if there is a blank parameter being passed to console_setup from uboot. In case it detects that the console parameter is blank then it doesn't setup the serial device and it gracefully exits. Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.comSigned-off-by:
Shreyas Joshi <shreyas.joshi@biamp.com> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.] Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit dc455f4c ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit d7372dfb ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 00583fbe ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 49ee3c2a ] We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking over the kernel function trace of the system it appears that the interface is being closed and then a reset is hitting which deadlocks the interface as the NAPI interface is already disabled. To prevent this from happening I am disabling the reset task when __E1000_DOWN is already set. In addition code has been added so that we set the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in order to guarantee that the reset task will not run after we have started the close call. Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by:
Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Anshuman Khandual authored
[ Upstream commit 1ed1b90a ] ID_DFR0 based TraceFilt feature should not be exposed to guests. Hence lets drop it. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/1589881254-10082-3-git-send-email-anshuman.khandual@arm.comSigned-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit d0b1e4a6 ] Fix to return negative error code -ENOMEM from create_afu error handling case instead of 0, as done elsewhere in this function. Link: https://lore.kernel.org/r/20200428141855.88704-1-weiyongjun1@huawei.comAcked-by:
Matthew R. Ochs <mrochs@linux.ibm.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit a7f40c23 ] The comparison of hcd->irq to less than zero for an error check will never be true because hcd->irq is an unsigned int. Fix this by assigning the int retval to the return of platform_get_irq and checking this for the -ve error condition and assigning hcd->irq to retval. Addresses-Coverity: ("Unsigned compared against 0") Fixes: c856b4b0 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 32f98877 ] page_count() is unstable. Unless there has been an RCU grace period between when the page was removed from the page cache and now, a speculative reference may exist from the page cache. Reported-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit 265d6e58 ] System Reset and Machine Check interrupts that are not recoverable due to being nested or interrupting when RI=0 currently panic. This is not necessary, and can often just kill the current context and recover. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200508043408.886394-16-npiggin@gmail.comSigned-off-by:
-
Takashi Iwai authored
[ Upstream commit c637fa15 ] The unsol event handling code has a loop retrieving the read/write indices and the arrays without locking while the append to the array may happen concurrently. This may lead to some inconsistency. Although there hasn't been any proof of this bad results, it's still safer to protect the racy accesses. This patch adds the spinlock protection around the unsol handling loop for addressing it. Here we take bus->reg_lock as the writer side snd_hdac_bus_queue_event() is also protected by that lock. Link: https://lore.kernel.org/r/20200516062556.30951-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jonathan Bakker authored
[ Upstream commit 7d31676a ] Some variants of the samsung tty driver can pick which clock to use for their baud rate generation. In the DT conversion, a default clock was selected to be used if a specific one wasn't assigned and then a comparison of which clock rate worked better was done. Unfortunately, the comparison was implemented in such a way that only the default clock was ever actually compared. Fix this by iterating through all possible clocks, except when a specific clock has already been picked via clk_sel (which is only possible via board files). Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/BN6PR04MB06604E63833EA41837EBF77BA3A30@BN6PR04MB0660.namprd04.prod.outlook.comSigned-off-by:
-
Tuong Lien authored
[ Upstream commit 0771d7df ] Upon receipt of a service subscription request from user via a topology connection, one 'sub' object will be allocated in kernel, so it will be able to send an event of the service if any to the user correspondingly then. Also, in case of any failure, the connection will be shutdown and all the pertaining 'sub' objects will be freed. However, there is a race condition as follows resulting in memory leak: receive-work connection send-work | | | sub-1 |<------//-------| | sub-2 |<------//-------| | | |<---------------| evt for sub-x sub-3 |<------//-------| | : : : : : : | /--------| | | | * peer closed | | | | | | | |<-------X-------| evt for sub-y | | |<===============| sub-n |<------/ X shutdown | -> orphan | | That is, the 'receive-work' may get the last subscription request while the 'send-work' is shutting down the connection due to peer close. We had a 'lock' on the connection, so the two actions cannot be carried out simultaneously. If the last subscription is allocated e.g. 'sub-n', before the 'send-work' closes the connection, there will be no issue at all, the 'sub' objects will be freed. In contrast the last subscription will become orphan since the connection was closed, and we released all references. This commit fixes the issue by simply adding one test if the connection remains in 'connected' state right after we obtain the connection lock, then a subscription object can be created as usual, otherwise we ignore it. Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Reported-by:
Thang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tang Bin authored
[ Upstream commit c856b4b0 ] If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in mv_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Sonny Sasaka authored
[ Upstream commit adf1d692 ] After sending Inquiry Cancel command to the controller, it is possible that Inquiry Complete event comes before Inquiry Cancel command complete event. In this case the Inquiry Cancel command will have status of Command Disallowed since there is no Inquiry session to be cancelled. This case should not be treated as error, otherwise we can reach an inconsistent state. Example of a btmon trace when this happened: < HCI Command: Inquiry Cancel (0x01|0x0002) plen 0 > HCI Event: Inquiry Complete (0x01) plen 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 Inquiry Cancel (0x01|0x0002) ncmd 1 Status: Command Disallowed (0x0c) Signed-off-by:
Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Jonathan Bakker authored
[ Upstream commit 05942b8c ] The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver. This manifested in issues with the DWC2 driver since commit fe369e18 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Jonathan Bakker authored
[ Upstream commit 0383024f ] According to the datasheet available at (1), the bottom four bits are always zero and the actual voltage is 1.25x this value in mV. Since the kernel API specifies that voltages should be in uV, it should report 1250x the shifted value. 1) https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdfSigned-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Ian Rogers authored
[ Upstream commit 266150c9 ] Realloc of size zero is a free not an error, avoid this causing a double free. Caught by clang's address sanitizer: ==2634==ERROR: AddressSanitizer: attempting double-free on 0x6020000015f0 in thread T0: #0 0x5649659297fd in free llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:123:3 #1 0x5649659e9251 in __zfree tools/lib/zalloc.c:13:2 #2 0x564965c0f92c in mem2node__exit tools/perf/util/mem2node.c:114:2 #3 0x564965a08b4c in perf_c2c__report tools/perf/builtin-c2c.c:2867:2 #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #8 0x564965942e41 in main tools/perf/perf.c:538:3 0x6020000015f0 is located 0 bytes inside of 1-byte region [0x6020000015f0,0x6020000015f1) freed by thread T0 here: #0 0x564965929da3 in realloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3 #1 0x564965c0f55e in mem2node__init tools/perf/util/mem2node.c:97:16 #2 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8 #3 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #4 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #5 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #6 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #7 0x564965942e41 in main tools/perf/perf.c:538:3 previously allocated by thread T0 here: #0 0x564965929c42 in calloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3 #1 0x5649659e9220 in zalloc tools/lib/zalloc.c:8:9 #2 0x564965c0f32d in mem2node__init tools/perf/util/mem2node.c:61:12 #3 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8 #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #8 0x564965942e41 in main tools/perf/perf.c:538:3 v2: add a WARN_ON_ONCE when the free condition arises. Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200320182347.87675-1-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 8d9f73c0 ] In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added(). This fixes the following memory leak: unreferenced object 0xffff8880d9266b90 (size 16): comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5 ............kkk. backtrace: [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151 [<(____ptrval____)>] lane_ioctl+0x4b3/0x569 [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236 [<(____ptrval____)>] svc_ioctl+0x17d/0x198 [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f [<(____ptrval____)>] sock_ioctl+0x2f9/0x322 [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b [<(____ptrval____)>] ksys_ioctl+0x61/0x80 [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19 [<(____ptrval____)>] do_syscall_64+0x57/0x65 [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 8c149b7d ] The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>). Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 98448cdf ] We don't need to be quite as strict about mismatched AArch32 support, which is good because the friendly hardware folks have been busy mismatching this to their hearts' content. * We don't care about EL2 or EL3 (there are silly comments concerning the latter, so remove those) * EL1 support is gated by the ARM64_HAS_32BIT_EL1 capability and handled gracefully when a mismatch occurs * EL0 support is gated by the ARM64_HAS_32BIT_EL0 capability and handled gracefully when a mismatch occurs Relax the AArch32 checks to FTR_NONSTRICT. Tested-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by:
-
Wei Yongjun authored
[ Upstream commit ff62255a ] Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
-
Ivan Safonov authored
[ Upstream commit 628cbd97 ] skb clones use same data buffer, so tail of one skb is corrupted by beginning of next skb. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20200423191404.12028-1-insafonov@gmail.comSigned-off-by:
-
Christophe JAILLET authored
[ Upstream commit f7854c38 ] If 'scsi_host_alloc()' or 'kcalloc()' fail, 'error' is known to be 0. Set it explicitly to -ENOMEM before branching to the error handling path. While at it, remove 2 useless assignments to 'error'. These values are overwridden a few lines later. Link: https://lore.kernel.org/r/20200412094039.8822-1-christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit e5735887 ] When setting the meter rate to 4+Gbps, there is an overflow, the meters don't work as expected. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Zenghui Yu authored
[ Upstream commit 57bdb436 ] If we're going to fail out the vgic_add_lpi(), let's make sure the allocated vgic_irq memory is also freed. Though it seems that both cases are unlikely to fail. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200414030349.625-3-yuzenghui@huawei.comSigned-off-by:
-
Madhuparna Bhowmik authored
[ Upstream commit 44b8fb6e ] After registering character device the file operation callbacks can be called. The open callback registers interrupt handler. Therefore interrupt handler can execute in parallel with rest of the init function. To avoid such data race initialize telclk_interrupt variable and struct alarm_events before registering character device. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200417153451.1551-1-madhuparnabhowmik10@gmail.comSigned-off-by:
-
Douglas Anderson authored
[ Upstream commit b849dd84 ] While trying to "dd" to the block device for a USB stick, I encountered a hung task warning (blocked for > 120 seconds). I managed to come up with an easy way to reproduce this on my system (where /dev/sdb is the block device for my USB stick) with: while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done With my reproduction here are the relevant bits from the hung task detector: INFO: task udevd:294 blocked for more than 122 seconds. ... udevd D 0 294 1 0x00400008 Call trace: ... mutex_lock_nested+0x40/0x50 __blkdev_get+0x7c/0x3d4 blkdev_get+0x118/0x138 blkdev_open+0x94/0xa8 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3c8 ... ... Showing all locks held in the system: ... 1 lock held by dd/2798: #0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204 ... dd D 0 2798 2764 0x00400208 Call trace: ... schedule+0x8c/0xbc io_schedule+0x1c/0x40 wait_on_page_bit_common+0x238/0x338 __lock_page+0x5c/0x68 write_cache_pages+0x194/0x500 generic_writepages+0x64/0xa4 blkdev_writepages+0x24/0x30 do_writepages+0x48/0xa8 __filemap_fdatawrite_range+0xac/0xd8 filemap_write_and_wait+0x30/0x84 __blkdev_put+0x88/0x204 blkdev_put+0xc4/0xe4 blkdev_close+0x28/0x38 __fput+0xe0/0x238 ____fput+0x1c/0x28 task_work_run+0xb0/0xe4 do_notify_resume+0xfc0/0x14bc work_pending+0x8/0x14 The problem appears related to the fact that my USB disk is terribly slow and that I have a lot of RAM in my system to cache things. Specifically my writes seem to be happening at ~15 MB/s and I've got ~4 GB of RAM in my system that can be used for buffering. To write 4 GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds. The 267 second number is a problem because in __blkdev_put() we call sync_blockdev() while holding the bd_mutex. Any other callers who want the bd_mutex will be blocked for the whole time. The problem is made worse because I believe blkdev_put() specifically tells other tasks (namely udev) to go try to access the device at right around the same time we're going to hold the mutex for a long time. Putting some traces around this (after disabling the hung task detector), I could confirm: dd: 437.608600: __blkdev_put() right before sync_blockdev() for sdb udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb dd: 661.468451: __blkdev_put() right after sync_blockdev() for sdb udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb A simple fix for this is to realize that sync_blockdev() works fine if you're not holding the mutex. Also, it's not the end of the world if you sync a little early (though it can have performance impacts). Thus we can make a guess that we're going to need to do the sync and then do it without holding the mutex. We still do one last sync with the mutex but it should be much, much faster. With this, my hung task warnings for my test case are gone. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Steve Rutherford authored
[ Upstream commit 7289fdb5 ] Fixes a NULL pointer dereference, caused by the PIT firing an interrupt before the interrupt table has been initialized. SET_PIT2 can race with the creation of the IRQchip. In particular, if SET_PIT2 is called with a low PIT timer period (after the creation of the IOAPIC, but before the instantiation of the irq routes), the PIT can fire an interrupt at an uninitialized table. Signed-off-by:
Steve Rutherford <srutherford@google.com> Signed-off-by:
Jon Cargille <jcargill@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Message-Id: <20200416191152.259434-1-jcargill@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Raviteja Narayanam authored
[ Upstream commit 42e11948 ] On some platforms, the log is corrupted while console is being registered. It is observed that when set_termios is called, there are still some bytes in the FIFO to be transmitted. So, wait for tx_empty inside cdns_uart_console_setup before calling set_termios. Signed-off-by:
Raviteja Narayanam <raviteja.narayanam@xilinx.com> Reviewed-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.comSigned-off-by:
-
Nilesh Javali authored
[ Upstream commit b9b97e69 ] The destroy connection ramrod timed out during session logout. Fix the wait delay for graceful vs abortive termination as per the FW requirements. Link: https://lore.kernel.org/r/20200408064332.19377-7-mrangankar@marvell.comReviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Jaewon Kim authored
[ Upstream commit 09ef5283 ] On passing requirement to vm_unmapped_area, arch_get_unmapped_area and arch_get_unmapped_area_topdown did not set align_offset. Internally on both unmapped_area and unmapped_area_topdown, if info->align_mask is 0, then info->align_offset was meaningless. But commit df529cab ("mm: mmap: add trace point of vm_unmapped_area") always prints info->align_offset even though it is uninitialized. Fix this uninitialized value issue by setting it to 0 explicitly. Before: vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022 After: vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0 Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Israel Rukshin authored
[ Upstream commit 21f90243 ] In case rdma accept fails at nvmet_rdma_queue_connect(), release work is scheduled. Later on, a new RDMA CM event may arrive since we didn't destroy the cm-id and call nvmet_rdma_queue_connect_fail(), which schedule another release work. This will cause calling nvmet_rdma_free_queue twice. To fix this we implicitly destroy the cm_id with non-zero ret code, which guarantees that new rdma_cm events will not arrive afterwards. Also add a qp pointer to nvmet_rdma_queue structure, so we can use it when the cm_id pointer is NULL or was destroyed. Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Suggested-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
Qian Cai authored
[ Upstream commit 5644e1fb ] pgdat->kswapd_classzone_idx could be accessed concurrently in wakeup_kswapd(). Plain writes and reads without any lock protection result in data races. Fix them by adding a pair of READ|WRITE_ONCE() as well as saving a branch (compilers might well optimize the original code in an unintentional way anyway). While at it, also take care of pgdat->kswapd_order and non-kswapd threads in allow_direct_reclaim(). The data races were reported by KCSAN, BUG: KCSAN: data-race in wakeup_kswapd / wakeup_kswapd write to 0xffff9f427ffff2dc of 4 bytes by task 7454 on cpu 13: wakeup_kswapd+0xf1/0x400 wakeup_kswapd at mm/vmscan.c:3967 wake_all_kswapds+0x59/0xc0 wake_all_kswapds at mm/page_alloc.c:4241 __alloc_pages_slowpath+0xdcc/0x1290 __alloc_pages_slowpath at mm/page_alloc.c:4512 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 1 lock held by mtest01/7454: #0: ffff9f425afe8808 (&mm->mmap_sem#2){++++}, at: do_page_fault+0x143/0x6f9 do_user_addr_fault at arch/x86/mm/fault.c:1405 (inlined by) do_page_fault at arch/x86/mm/fault.c:1539 irq event stamp: 6944085 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x34c/0x57c irq_exit+0xa2/0xc0 read to 0xffff9f427ffff2dc of 4 bytes by task 7472 on cpu 38: wakeup_kswapd+0xc8/0x400 wake_all_kswapds+0x59/0xc0 __alloc_pages_slowpath+0xdcc/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 1 lock held by mtest01/7472: #0: ffff9f425a9ac148 (&mm->mmap_sem#2){++++}, at: do_page_fault+0x143/0x6f9 irq event stamp: 6793561 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x34c/0x57c irq_exit+0xa2/0xc0 BUG: KCSAN: data-race in kswapd / wakeup_kswapd write to 0xffff90973ffff2dc of 4 bytes by task 820 on cpu 6: kswapd+0x27c/0x8d0 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 read to 0xffff90973ffff2dc of 4 bytes by task 6299 on cpu 0: wakeup_kswapd+0xf3/0x450 wake_all_kswapds+0x59/0xc0 __alloc_pages_slowpath+0xdcc/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x170/0x700 __handle_mm_fault+0xc9f/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Xianting Tian authored
[ Upstream commit faffdfa0 ] Mount failure issue happens under the scenario: Application forked dozens of threads to mount the same number of cramfs images separately in docker, but several mounts failed with high probability. Mount failed due to the checking result of the page(read from the superblock of loop dev) is not uptodate after wait_on_page_locked(page) returned in function cramfs_read: wait_on_page_locked(page); if (!PageUptodate(page)) { ... } The reason of the checking result of the page not uptodate: systemd-udevd read the loopX dev before mount, because the status of loopX is Lo_unbound at this time, so loop_make_request directly trigger the calling of io_end handler end_buffer_async_read, which called SetPageError(page). So It caused the page can't be set to uptodate in function end_buffer_async_read: if(page_uptodate && !PageError(page)) { SetPageUptodate(page); } Then mount operation is performed, it used the same page which is just accessed by systemd-udevd above, Because this page is not uptodate, it will launch a actual read via submit_bh, then wait on this page by calling wait_on_page_locked(page). When the I/O of the page done, io_end handler end_buffer_async_read is called, because no one cleared the page error(during the whole read path of mount), which is caused by systemd-udevd reading, so this page is still in "PageError" status, which can't be set to uptodate in function end_buffer_async_read, then caused mount failure. But sometimes mount succeed even through systemd-udeved read loopX dev just before, The reason is systemd-udevd launched other loopX read just between step 3.1 and 3.2, the steps as below: 1, loopX dev default status is Lo_unbound; 2, systemd-udved read loopX dev (page is set to PageError); 3, mount operation 1) set loopX status to Lo_bound; ==>systemd-udevd read loopX dev<== 2) read loopX dev(page has no error) 3) mount succeed As the loopX dev status is set to Lo_bound after step 3.1, so the other loopX dev read by systemd-udevd will go through the whole I/O stack, part of the call trace as below: SYS_read vfs_read do_sync_read blkdev_aio_read generic_file_aio_read do_generic_file_read: ClearPageError(page); mapping->a_ops->readpage(filp, page); here, mapping->a_ops->readpage() is blkdev_readpage. In latest kernel, some function name changed, the call trace as below: blkdev_read_iter generic_file_read_iter generic_file_buffered_read: /* * A previous I/O error may have been due to temporary * failures, eg. mutipath errors. * Pg_error will be set again if readpage fails. */ ClearPageError(page); /* Start the actual read. The read will unlock the page*/ error=mapping->a_ops->readpage(flip, page); We can see ClearPageError(page) is called before the actual read, then the read in step 3.2 succeed. This patch is to add the calling of ClearPageError just before the actual read of read path of cramfs mount. Without the patch, the call trace as below when performing cramfs mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page do_read_cache_page: filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, the call trace as below when performing mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page: do_read_cache_page: ClearPageError(page); <== new add filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, mount operation trigger the calling of ClearPageError(page) before the actual read, the page has no error if no additional page error happen when I/O done. Signed-off-by:
Xianting Tian <xianting_tian@126.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit b0d14fc4 ] Clang warns: mm/kmemleak.c:1955:28: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) ^ mm/kmemleak.c:1955:60: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/895 Link: http://lkml.kernel.org/r/20200220051551.44000-1-natechancellor@gmail.comSigned-off-by:
-
Trond Myklebust authored
[ Upstream commit 08ca8b21 ] When a subrequest is being detached from the subgroup, we want to ensure that it is not holding the group lock, or in the process of waiting for the group lock. Fixes: 5b2b5187 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Stuart Hayes authored
[ Upstream commit 8edf5332 ] Without this commit, a PCIe hotplug port can stop generating interrupts on hotplug events, so device adds and removals will not be seen: The pciehp interrupt handler pciehp_isr() reads the Slot Status register and then writes back to it to clear the bits that caused the interrupt. If a different interrupt event bit gets set between the read and the write, pciehp_isr() returns without having cleared all of the interrupt event bits. If this happens when the MSI isn't masked (which by default it isn't in handle_edge_irq(), and which it will never be when MSI per-vector masking is not supported), we won't get any more hotplug interrupts from that device. That is expected behavior, according to the PCIe Base Spec r5.0, section 6.7.3.4, "Software Notification of Hot-Plug Events". Because the Presence Detect Changed and Data Link Layer State Changed event bits can both get set at nearly the same time when a device is added or removed, this is more likely to happen than it might seem. The issue was found (and can be reproduced rather easily) by connecting and disconnecting an NVMe storage device on at least one system model where the NVMe devices were being connected to an AMD PCIe port (PCI device 0x1022/0x1483). Fix the issue by modifying pciehp_isr() to loop back and re-read the Slot Status register immediately after writing to it, until it sees that all of the event status bits have been cleared. [lukas: drop loop count limitation, write "events" instead of "status", don't loop back in INTx and poll modes, tweak code comment & commit msg] Link: https://lore.kernel.org/r/78b4ced5072bfe6e369d20e8b47c279b8c7af12e.1582121613.git.lukas@wunner.deTested-by:
Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Andreas Steinmetz authored
[ Upstream commit 5c6cd702 ] The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra endpoint descriptor. The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00 As the code in snd_usbmidi_get_ms_info() looks only at the first extra descriptor to find USB_DT_CS_ENDPOINT the device as such is recognized but there is neither input nor output configured. The patch iterates through the extra descriptors to find the proper one. With this patch the device is correctly configured. Signed-off-by:
Andreas Steinmetz <ast@domdv.de> Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.deSigned-off-by:
-
