- 02 Mar, 2017 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - enable dual mode (initiator + target) qla2xxx operation. (Quinn + Himanshu) - add a framework for qla2xxx async fabric discovery. (Quinn + Himanshu) - enable iscsi PDU DDP completion offload in cxgbit/T6 NICs. (Varun) - fix target-core handling of aborted failed commands. (Bart) - fix a long standing target-core issue NULL pointer dereference with active I/O LUN shutdown. (Rob Millner + Bryant + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) target: Add counters for ABORT_TASK success + failure iscsi-target: Fix early login failure statistics misses target: Fix NULL dereference during LUN lookup + active I/O shutdown target: Delete tmr from list before processing target: Fix handling of aborted failed commands uapi: fix linux/target_core_user.h userspace compilation errors target: export protocol identifier qla2xxx: Fix a warning reported by the "smatch" static checker target/iscsi: Fix unsolicited data seq_end_offset calculation target/cxgbit: add T6 iSCSI DDP completion feature target/cxgbit: Enable DDP for T6 only if data sequence and pdu are in order target/cxgbit: Use T6 specific macros to get ETH/IP hdr len target/cxgbit: use cxgb4_tp_smt_idx() to get smt idx target/iscsi: split iscsit_check_dataout_hdr() target: Remove command flag CMD_T_DEV_ACTIVE target: Remove command flag CMD_T_BUSY target: Move session check from target_put_sess_cmd() into target_release_cmd_kref() target: Inline transport_cmd_check_stop() target: Remove an overly chatty debug message target: Stop execution if CMD_T_STOP has been set ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - a dm-raid stable@ fix for possible corruption when triggering a raid reshape via lvm2; and an additional small patch ontop to bump version of the dm-raid target outside of the stable@ fix - a dm-raid fix for a 'dm-4.11-changes' regression introduced by a commit that was meant to only cleanup confusing branching. * tag 'dm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: bump the target version dm raid: fix data corruption on reshape request dm raid: fix raid "check" regression due to improper cleanup in raid_message()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull vhost updates from Michael Tsirkin: "virtio, vhost: optimizations, fixes Looks like a quiet cycle for vhost/virtio, just a couple of minor tweaks. Most notable is automatic interrupt affinity for blk and scsi. Hopefully other devices are not far behind" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-console: avoid DMA from stack vhost: introduce O(1) vq metadata cache virtio_scsi: use virtio IRQ affinity virtio_blk: use virtio IRQ affinity blk-mq: provide a default queue mapping for virtio device virtio: provide a method to get the IRQ affinity mask for a virtqueue virtio: allow drivers to request IRQ affinity when creating VQs virtio_pci: simplify MSI-X setup virtio_pci: don't duplicate the msix_enable flag in struct pci_dev virtio_pci: use shared interrupts for virtqueues virtio_pci: remove struct virtio_pci_vq_info vhost: try avoiding avail index access when getting descriptor virtio_mmio: expose header to userspace
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security subsystem fixes from James Morris: "Two fixes for the security subsystem: - keys: split both rcu_dereference_key() and user_key_payload() into versions which can be called with or without holding the key semaphore. - SELinux: fix Android init(8) breakage due to new cgroup security labeling support when using older policy" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: wrap cgroup seclabel support with its own policy capability KEYS: Differentiate uses of rcu_dereference_key() and user_key_payload()
-
Linus Torvalds authored
Merge tag 'watchdog-for-linus-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull more watchdog updates from Guenter Roeck: - fix fallout from enabling COMPILE_TEST - fix gcc-4.3 build of kempld watchdog driver - use hrtimer in softdog * tag 'watchdog-for-linus-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: watchdog: retu: restore MFD dependency watchdog: db8500: add back prmcu dependency watchdog: kempld: fix gcc-4.3 build watchdog: softdog: fire watchdog even if softirqs do not get to run watchdog: kempld: revert to full dependency watchdog: bcm2835: add CONFIG_OF dependency watchdog: sp805: add back AMBA dependency watchdog: menf21bmc: add I2C dependency watchdog: geode: restore hard CS5535_MFGPT dependency watchdog: wm831x watchdog really needs mfd
-
Linus Torvalds authored
gcc-7 has an "optimization" pass that completely screws up, and generates the code expansion for the (impossible) case of calling ilog2() with a zero constant, even when the code gcc compiles does not actually have a zero constant. And we try to generate a compile-time error for anybody doing ilog2() on a constant where that doesn't make sense (be it zero or negative). So now gcc7 will fail the build due to our sanity checking, because it created that constant-zero case that didn't actually exist in the source code. There's a whole long discussion on the kernel mailing about how to work around this gcc bug. The gcc people themselevs have discussed their "feature" in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785 but it's all water under the bridge, because while it looked at one point like it would be solved by the time gcc7 was released, that was not to be. So now we have to deal with this compiler braindamage. And the only simple approach seems to be to just delete the code that tries to warn about bad uses of ilog2(). So now "ilog2()" will just return 0 not just for the value 1, but for any non-positive value too. It's not like I can recall anybody having ever actually tried to use this function on any invalid value, but maybe the sanity check just meant that such code never made it out in public. Reported-by: Laura Abbott <labbott@redhat.com> Cc: John Stultz <john.stultz@linaro.org>, Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool relocation fixes from Ingo Molnar: "Two fixes related to the module loading regression introduced by the recent objtool changes" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool, modules: Discard objtool annotation sections for modules objtool, compiler.h: Fix __unreachable section relocation size
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - NFSv4: Fix memory and state leak in _nfs4_open_and_get_state - xprtrdma: Fix Read chunk padding - xprtrdma: Per-connection pad optimization - xprtrdma: Disable pad optimization by default - xprtrdma: Reduce required number of send SGEs - nlm: Ensure callback code also checks that the files match - pNFS/flexfiles: If the layout is invalid, it must be updated before retrying - NFSv4: Fix reboot recovery in copy offload - Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to OP_SEQUENCE" - NFSv4: fix getacl head length estimation - NFSv4: fix getacl ERANGE for sum ACL buffer sizes Features: - Add and use dprintk_cont macros - Various cleanups to NFS v4.x to reduce code duplication and complexity - Remove unused cr_magic related code - Improvements to sunrpc "read from buffer" code - Clean up sunrpc timeout code and allow changing TCP timeout parameters - Remove duplicate mw_list management code in xprtrdma - Add generic functions for encoding and decoding xdr streams Bugfixes: - Clean up nfs_show_mountd_netid - Make layoutreturn_ops static and use NULL instead of 0 to fix sparse warnings - Properly handle -ERESTARTSYS in nfs_rename() - Check if register_shrinker() failed during rpcauth_init() - Properly clean up procfs/pipefs entries - Various NFS over RDMA related fixes - Silence unititialized variable warning in sunrpc" * tag 'nfs-for-4.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (64 commits) NFSv4: fix getacl ERANGE for some ACL buffer sizes NFSv4: fix getacl head length estimation Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to OP_SEQUENCE" NFSv4: Fix reboot recovery in copy offload pNFS/flexfiles: If the layout is invalid, it must be updated before retrying NFSv4: Clean up owner/group attribute decode SUNRPC: Add a helper function xdr_stream_decode_string_dup() NFSv4: Remove bogus "struct nfs_client" argument from decode_ace() NFSv4: Fix the underestimation of delegation XDR space reservation NFSv4: Replace callback string decode function with a generic NFSv4: Replace the open coded decode_opaque_inline() with the new generic NFSv4: Replace ad-hoc xdr encode/decode helpers with xdr_stream_* generics SUNRPC: Add generic helpers for xdr_stream encode/decode sunrpc: silence uninitialized variable warning nlm: Ensure callback code also checks that the files match sunrpc: Allow xprt->ops->timer method to sleep xprtrdma: Refactor management of mw_list field xprtrdma: Handle stale connection rejection xprtrdma: Properly recover FRWRs with in-flight FASTREG WRs xprtrdma: Shrink send SGEs array ...
-
- 01 Mar, 2017 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "This round introduces several interesting features such as on-disk NAT bitmaps, IO alignment, and a discard thread. And it includes a couple of major bug fixes as below. Enhancements: - introduce on-disk bitmaps to avoid scanning NAT blocks when getting free nids - support IO alignment to prepare open-channel SSD integration in future - introduce a discard thread to avoid long latency during checkpoint and fstrim - use SSR for warm node and enable inline_xattr by default - introduce in-memory bitmaps to check FS consistency for debugging - improve write_begin by avoiding needless read IO Bug fixes: - fix broken zone_reset behavior for SMR drive - fix wrong victim selection policy during GC - fix missing behavior when preparing discard commands - fix bugs in atomic write support and fiemap - workaround to handle multiple f2fs_add_link calls having same name ... and it includes a bunch of clean-up patches as well" * tag 'for-f2fs-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (97 commits) f2fs: avoid to flush nat journal entries f2fs: avoid to issue redundant discard commands f2fs: fix a plint compile warning f2fs: add f2fs_drop_inode tracepoint f2fs: Fix zoned block device support f2fs: remove redundant set_page_dirty() f2fs: fix to enlarge size of write_io_dummy mempool f2fs: fix memory leak of write_io_dummy mempool during umount f2fs: fix to update F2FS_{CP_}WB_DATA count correctly f2fs: use MAX_FREE_NIDS for the free nids target f2fs: introduce free nid bitmap f2fs: new helper cur_cp_crc() getting crc in f2fs_checkpoint f2fs: update the comment of default nr_pages to skipping f2fs: drop the duplicate pval in f2fs_getxattr f2fs: Don't update the xattr data that same as the exist f2fs: kill __is_extent_same f2fs: avoid bggc->fggc when enough free segments are avaliable after cp f2fs: select target segment with closer temperature in SSR mode f2fs: show simple call stack in fault injection message f2fs: no need lock_op in f2fs_write_inline_data ...
-
Omar Sandoval authored
put_chars() stuffs the buffer it gets into an sg, but that buffer may be on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it manifested as printks getting turned into NUL bytes). Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com>
-
Jason Wang authored
When device IOTLB is enabled, all address translations were stored in interval tree. O(lgN) searching time could be slow for virtqueue metadata (avail, used and descriptors) since they were accessed much often than other addresses. So this patch introduces an O(1) array which points to the interval tree nodes that store the translations of vq metadata. Those array were update during vq IOTLB prefetching and were reset during each invalidation and tlb update. Each time we want to access vq metadata, this small array were queried before interval tree. This would be sufficient for static mappings but not dynamic mappings, we could do optimizations on top. Test were done with l2fwd in guest (2M hugepage): noiommu | before | after tx 1.32Mpps | 1.06Mpps(82%) | 1.30Mpps(98%) rx 2.33Mpps | 1.46Mpps(63%) | 2.29Mpps(98%) We can almost reach the same performance as noiommu mode. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Stephen Smalley authored
commit 1ea0ce40 ("selinux: allow changing labels for cgroupfs") broke the Android init program, which looks up security contexts whenever creating directories and attempts to assign them via setfscreatecon(). When creating subdirectories in cgroup mounts, this would previously be ignored since cgroup did not support userspace setting of security contexts. However, after the commit, SELinux would attempt to honor the requested context on cgroup directories and fail due to permission denial. Avoid breaking existing userspace/policy by wrapping this change with a conditional on a new cgroup_seclabel policy capability. This preserves existing behavior until/unless a new policy explicitly enables this capability. Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
-
David Howells authored
rcu_dereference_key() and user_key_payload() are currently being used in two different, incompatible ways: (1) As a wrapper to rcu_dereference() - when only the RCU read lock used to protect the key. (2) As a wrapper to rcu_dereference_protected() - when the key semaphor is used to protect the key and the may be being modified. Fix this by splitting both of the key wrappers to produce: (1) RCU accessors for keys when caller has the key semaphore locked: dereference_key_locked() user_key_payload_locked() (2) RCU accessors for keys when caller holds the RCU read lock: dereference_key_rcu() user_key_payload_rcu() This should fix following warning in the NFS idmapper =============================== [ INFO: suspicious RCU usage. ] 4.10.0 #1 Tainted: G W ------------------------------- ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 1 lock held by mount.nfs/5987: #0: (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4] stack backtrace: CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G W 4.10.0 #1 Call Trace: dump_stack+0xe8/0x154 (unreliable) lockdep_rcu_suspicious+0x140/0x190 nfs_idmap_get_key+0x380/0x420 [nfsv4] nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4] decode_getfattr_attrs+0xfac/0x16b0 [nfsv4] decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4] nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4] rpcauth_unwrap_resp+0xe8/0x140 [sunrpc] call_decode+0x29c/0x910 [sunrpc] __rpc_execute+0x140/0x8f0 [sunrpc] rpc_run_task+0x170/0x200 [sunrpc] nfs4_call_sync_sequence+0x68/0xa0 [nfsv4] _nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4] nfs4_lookup_root+0xe0/0x350 [nfsv4] nfs4_lookup_root_sec+0x70/0xa0 [nfsv4] nfs4_find_root_sec+0xc4/0x100 [nfsv4] nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4] nfs4_get_rootfh+0x6c/0x190 [nfsv4] nfs4_server_common_setup+0xc4/0x260 [nfsv4] nfs4_create_server+0x278/0x3c0 [nfsv4] nfs4_remote_mount+0x50/0xb0 [nfsv4] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 nfs_do_root_mount+0xb0/0x140 [nfsv4] nfs4_try_mount+0x60/0x100 [nfsv4] nfs_fs_mount+0x5ec/0xda0 [nfs] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 do_mount+0x254/0xf70 SyS_mount+0x94/0x100 system_call+0x38/0xe0 Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
-
Josh Poimboeuf authored
The '__unreachable' and '__func_stack_frame_non_standard' sections are only used at compile time. They're discarded for vmlinux but they should also be discarded for modules. Since this is a recurring pattern, prefix the section names with ".discard.". It's a nice convention and vmlinux.lds.h already discards such sections. Also remove the 'a' (allocatable) flag from the __unreachable section since it doesn't make sense for a discarded section. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d1091c7f ("objtool: Improve detection of BUG() and other dead ends") Link: http://lkml.kernel.org/r/20170301180444.lhd53c5tibc4ns77@trebleSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "The main fix here addresses a kernel panic triggered on Qualcomm QDF2400 due to incorrect register usage in an erratum workaround introduced during the merge window. Summary: - Fix kernel panic on specific Qualcomm platform due to broken erratum workaround - Revert contiguous bit support due to TLB conflict aborts in simulation - Don't treat all CPU ID register fields as 4-bit quantities" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/cpufeature: check correct field width when updating sys_val Revert "arm64: mm: set the contiguous bit for kernel mappings where appropriate" arm64: Avoid clobbering mm in erratum workaround on QDF2400
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull more powerpc updates from Michael Ellerman: "Highlights include: - an update of the disassembly code used by xmon to the latest versions in binutils. We've received permission from all the authors of the relevant binutils changes to relicense their changes to the relevant files from GPLv3 to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg work to get permission from everyone. - addition of the "architected" Power9 CPU table entry, allowing us to boot in Power9 architected mode under a hypervisor. - updates to the Power9 PMU code. - implementation of clear_bit_unlock_is_negative_byte() to optimise unlock_page(). - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf, t1042rdb display support, and board updates." Thanks to: Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith" * tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc: Remove leftover cputime_to_nsecs call causing build error powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU powerpc/optprobes: Fix TOC handling in optprobes trampoline powerpc/pseries: Advertise Hot Plug Event support to firmware cxl: fix nested locking hang during EEH hotplug powerpc/xmon: Dump memory in CPU endian format powerpc/pseries: Revert 'Auto-online hotplugged memory' powerpc/powernv: Make PCI non-optional powerpc/64: Implement clear_bit_unlock_is_negative_byte() powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable() powerpc/kernel: Remove error message in pcibios_setup_phb_resources() powerpc/mm: Fix typo in set_pte_at() pci/hotplug/pnv-php: Disable MSI and PCI device properly pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot() powerpc: Add POWER9 architected mode to cputable powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags() powerpc/perf: Avoid FAB_*_MATCH checks for power9 powerpc/perf: Add restrictions to PMC5 in power9 DD1 powerpc/perf: Use Instruction Counter value ...
-
Benjamin Tissoires authored
INPUT_PROP_BUTTONPAD is currently only set through the platform data. The RMI4 header doc says that this property is there to force the buttonpad property, so we also need to detect it by looking at the exported buttons count. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few last-minute fixes for rc1: - ALSA core timer and sequencer fixes for bugs spotted by syzkaller - a couple of trivial HD-audio fixups - additional PCI / codec IDs for Intel Geminilake - fixes for CT-XFi DMA mask bugs" * tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix link corruption by event error handling ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming ALSA: ctxfi: Fallback DMA mask to 32bit ALSA: timer: Reject user params with too small ticks ALSA: hda: Add Geminilake HDMI codec ID ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine ALSA: hda - Add Geminilake PCI ID
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management updates from Zhang Rui: - add thermal driver for R-Car Gen3 thermal sensors. - add thermal driver for ZTE' zx2967 family thermal sensors. - convert thermal ID allocation from IDR to IDA. - fix a possible NULL dereference in imx thermal driver. - fix a ti-soc-thermal driver dependency issue so that critical thermal control is still available when CPU_THERMAL is not defined. - update binding information for QorIQ thermal driver. - a couple of cleanups in thermal core, intel_powerclamp, exynos, dra752-thermal, mtk-thermal driver. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: powerpc/mpc85xx: Update TMU device tree node for T1023/T1024 powerpc/mpc85xx: Update TMU device tree node for T1040/T1042 dt-bindings: Update QorIQ TMU thermal bindings thermal: mtk_thermal: Staticise a number of data variables thermal: arm: dra752: Remove all TSHUT related definitions thermal: arm: dra752: Remove TSHUT configuration thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL thermal: imx: Fix possible NULL dereference. thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property thermal: zx2967: add thermal driver for ZTE's zx2967 family thermal: use cpumask_var_t for on-stack cpu masks dt: bindings: add documentation for zx2967 family thermal sensor thermal/intel_powerclamp: Remove set-but-not-used variables thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver thermal: rcar_gen3_thermal: Document the R-Car Gen3 thermal: convert devfreq_cooling to use an IDA thermal: convert cpu_cooling to use an IDA thermal: convert clock cooling to use an IDA thermal core: convert ID allocation to IDA
-
Linus Torvalds authored
Merge tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set contains mostly fixes to existing drivers as well as cleanup of code that's not been in active use for a while" * tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits) acpi: lpss: call pwm_add_table() for BSW PWM device pwm: Try to load modules during pwm_get() pwm: Don't hold pwm_lookup_lock longer than necessary pwm: Make the PWM_POLARITY flag in DTB optional pwm: Print error messages with pr_err() instead of pr_debug() pwm: imx: Add polarity inversion support to i.MX's PWMv2 pwm: imx: doc: Update imx-pwm.txt documentation entry pwm: imx: Remove redundant i.MX PWMv2 code pwm: imx: Provide atomic PWM support for i.MX PWMv2 pwm: imx: Move PWMv2 wait for fifo slot code to a separate function pwm: imx: Move PWMv2 software reset code to a separate function pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM pwm: imx: Add separate set of PWM ops for v1 and v2 pwm: imx: Remove ipg clock and enable per clock when required pwm: lpss: Add Intel Gemini Lake PCI ID pwm: lpss: Do not export board infos for different PWM types pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled pwm: lpss: Switch to new atomic API pwm: lpss: Allow duty cycle to be 0 pwm: lpss: Avoid potential overflow of base_unit ...
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm AST2500 support from Dave Airlie: "This is a set of changes to enable the AST2500 BMC hardware, and also fix some bugs interacting with the older AST hardware. Some of the bug fixes are cc'ed to stable" * tag 'drm-ast-2500-for-v4.11' of git://people.freedesktop.org/~airlied/linux: drm/ast: Call open_key before enable_mmio in POST code drm/ast: Fix test for VGA enabled drm/ast: POST code for the new AST2500 drm/ast: Rename ast_init_dram_2300 to ast_post_chip_2300 drm/ast: Factor mmc_test code in POST code drm/ast: Fixed vram size incorrect issue on POWER drm/ast: Base support for AST2500 drm/ast: Fix calculation of MCLK drm/ast: Remove spurious include drm/ast: const'ify mode setting tables drm/ast: Handle configuration without P2A bridge drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Misc fixes for v4.11-rc1. This is a selection of fixes for recent bugs, the vmwgfx one is important to avoid a regression, and compat ioctl one is pretty urgent for stable. Otherwise nothing too much. I've got a separate pull req for some AST hw IBM need to enable" * tag 'drm-fixes-for-v4.11-rc1' of git://people.freedesktop.org/~airlied/linux: dma-buf: add support for compat ioctl drm/vmwgfx: Work around drm removal of control nodes drm/rockchip: cdn-dp: Fix error handling drm/rockchip: add extcon dependency for DP drm: zte: fix static checker warning on variable 'fmt'
-
Arnd Bergmann authored
The retu watchdog calls into the respective mfd driver, but fails to link if that is diabled: drivers/watchdog/built-in.o: In function `retu_wdt_set_timeout': ziirave_wdt.c:(.text+0x8c88): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8c88): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' drivers/watchdog/built-in.o: In function `retu_wdt_start': ziirave_wdt.c:(.text+0x8cc8): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8cc8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' This restores the dependency as it was before Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
When the db8500 watchdog is enabled without the PRCMU, we get a lot of warnings about duplicate or missing helper functions: In file included from drivers/watchdog/ux500_wdt.c:21:0: include/linux/mfd/dbx500-prcmu.h:422:19: error: redefinition of 'prcmu_abb_read' static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) This restores the dependency as it was. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
gcc-4.3 can't decide whether the constant value in kempld_prescaler[PRESCALER_21] is built-time constant or not, and gets confused by the logic in do_div(): drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout': kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod' This adds a call to ACCESS_ONCE() to force it to not consider it to be constant, and leaves the more efficient normal case in place for modern compilers, using an #ifdef to annotate why we do this hack. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Niklas Cassel authored
Checking for timer expiration is done from the softirq TIMER_SOFTIRQ. Since commit 4cd13c21 ("softirq: Let ksoftirqd do its job"), pending softirqs are no longer always handled immediately, instead, if there are pending softirqs, and ksoftirqd is in state TASK_RUNNING, the handling of the softirqs are deferred, and are instead supposed to be handled by ksoftirqd, when ksoftirqd gets scheduled. If a user space process with a real-time policy starts to misbehave by never relinquishing the CPU while ksoftirqd is in state TASK_RUNNING, what will happen is that all softirqs will get deferred, while ksoftirqd, which is supposed to handle the deferred softirqs, will never get to run. To make sure that the watchdog is able to fire even when we do not get to run softirqs, replace the timers with hrtimers. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
The kempld watchdog driver requires the respective MFD driver: drivers/watchdog/built-in.o: In function `kempld_wdt_probe': kempld_wdt.c:(.text+0x5c78): undefined reference to `kempld_get_mutex' kempld_wdt.c:(.text+0x5c84): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5c8e): undefined reference to `kempld_release_mutex' kempld_wdt.c:(.text+0x5d1c): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5d2c): undefined reference to `kempld_write8' This adds the Kconfig dependency back. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
Without CONFIG_OF, the driver fails to link: drivers/watchdog/built-in.o: In function `bcm2835_power_off': bcm2835_wdt.c:(.text+0x1946): undefined reference to `of_find_device_by_node' This adds a new dependency, to allow the COMPILE_TEST check to succeed. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
The driver fails to link if ARM_AMBA is disabled: drivers/watchdog/sp805_wdt.o: In function `sp805_wdt_driver_init': sp805_wdt.c:(.init.text+0x4): undefined reference to `amba_driver_register' It seems that the COMPILE_TEST was added in the wrong place, as there is no architecture dependency, but a bus dependency. This moves the dependency accordingly. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
This driver fails to link when CONFIG_I2C is disabled or a loadable module while the watchdog is built-in: drivers/watchdog/built-in.o: In function `menf21bmc_wdt_shutdown': menf21bmc_wdt.c:(.text+0x9b44): undefined reference to `i2c_smbus_write_word_data' menf21bmc_wdt.c:(.text+0x9b44): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `i2c_smbus_write_word_data' This adds a Kconfig dependency for it, to enforce a valid configuration. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
Wtihout CONFIG_CS5535_MFGPT, the driver does not link right: drivers/watchdog/built-in.o: In function `geodewdt_probe': geodewdt.c:(.init.text+0xca3): undefined reference to `cs5535_mfgpt_alloc_timer' geodewdt.c:(.init.text+0xcd4): undefined reference to `cs5535_mfgpt_write' geodewdt.c:(.init.text+0xcef): undefined reference to `cs5535_mfgpt_toggle_event' This adds back the dependency on this base driver. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Arnd Bergmann authored
The wm831x watchdog driver can now be built without the wm831x mfd driver, which results in a link error: (.text+0x1a95c): undefined reference to `wm831x_set_bits' (.text+0x1a95c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_set_bits' (.text+0x1a968): undefined reference to `wm831x_reg_lock' (.text+0x1a968): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_reg_lock' (.text+0x1a9dc): undefined reference to `wm831x_reg_unlock' (.text+0x1a9dc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_reg_unlock' This adds back the dependency that was removed. We can still build test this driver on all architectures by enabling the MFD driver for it first. Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Josh Poimboeuf authored
Linus reported the following commit broke module loading on his laptop: d1091c7f ("objtool: Improve detection of BUG() and other dead ends") It showed errors like the following: module: overflow in relocation type 10 val ffffffffc02afc81 module: 'nvme' likely not compiled with -mcmodel=kernel The problem is that the __unreachable section addresses are stored using the '.long' asm directive, which isn't big enough for .text section kernel addresses. Use relative addresses instead: ".long %c0b - .\t\n" Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d1091c7f ("objtool: Improve detection of BUG() and other dead ends") Link: http://lkml.kernel.org/r/20170301060504.oltm3iws6fmubnom@trebleSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "This is a few small fixes to the main IPMI driver, make some things const, fix typos, etc. The last patch came in about a week ago, but IMHO it's best to go in now. It is not for the main driver, it's for the bt-bmc driver, which runs on the managment controller side, not on the host side, so the scope is limited and the change is necessary" * tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: bt-bmc: Use a regmap for register access char: ipmi: constify ipmi_smi_handlers structures acpi:ipmi: Make IPMI user handler const ipmi: make ipmi_usr_hndl const Documentation: Fix a typo in IPMI.txt.
-
git://git.infradead.org/users/willy/linux-daxLinus Torvalds authored
Pull IDR rewrite from Matthew Wilcox: "The most significant part of the following is the patch to rewrite the IDR & IDA to be clients of the radix tree. But there's much more, including an enhancement of the IDA to be significantly more space efficient, an IDR & IDA test suite, some improvements to the IDR API (and driver changes to take advantage of those improvements), several improvements to the radix tree test suite and RCU annotations. The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree for most of the last cycle. Coupled with the IDR test suite, I feel pretty confident that any remaining bugs are quite hard to hit. 0-day did a great job of watching my git tree and pointing out problems; as it hit them, I added new test-cases to be sure not to be caught the same way twice" Willy goes on to expand a bit on the IDR rewrite rationale: "The radix tree and the IDR use very similar data structures. Merging the two codebases lets us share the memory allocation pools, and results in a net deletion of 500 lines of code. It also opens up the possibility of exposing more of the features of the radix tree to users of the IDR (and I have some interesting patches along those lines waiting for 4.12) It also shrinks the size of the 'struct idr' from 40 bytes to 24 which will shrink a fair few data structures that embed an IDR" * 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits) radix tree test suite: Add config option for map shift idr: Add missing __rcu annotations radix-tree: Fix __rcu annotations radix-tree: Add rcu_dereference and rcu_assign_pointer calls radix tree test suite: Run iteration tests for longer radix tree test suite: Fix split/join memory leaks radix tree test suite: Fix leaks in regression2.c radix tree test suite: Fix leaky tests radix tree test suite: Enable address sanitizer radix_tree_iter_resume: Fix out of bounds error radix-tree: Store a pointer to the root in each node radix-tree: Chain preallocated nodes through ->parent radix tree test suite: Dial down verbosity with -v radix tree test suite: Introduce kmalloc_verbose idr: Return the deleted entry from idr_remove radix tree test suite: Build separate binaries for some tests ida: Use exceptional entries for small IDAs ida: Move ida_bitmap to a percpu variable Reimplement IDR and IDA using the radix tree radix-tree: Add radix_tree_iter_delete ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: "Fix an issue introduced this merge window into the AMD and Intel IOMMU drivers that causes an oops when the vendor-specific sysfs-entries are accessed. The reason for this issue is that I forgot to update the sysfs code in the drivers when moving the iommu 'struct device' to the iommu-core" * tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix crash when accessing AMD-Vi sysfs entries iommu/vt-d: Fix crash when accessing VT-d sysfs entries
-
- 28 Feb, 2017 4 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "The nfsd update this round is mainly a lot of miscellaneous cleanups and bugfixes. A couple changes could theoretically break working setups on upgrade. I don't expect complaints in practice, but they seem worth calling out just in case: - NFS security labels are now off by default; a new security_label export flag reenables it per export. But, having them on by default is a disaster, as it generally only makes sense if all your clients and servers have similar enough selinux policies. Thanks to Jason Tibbitts for pointing this out. - NFSv4/UDP support is off. It was never really supported, and the spec explicitly forbids it. We only ever left it on out of laziness; thanks to Jeff Layton for finally fixing that" * tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits) nfsd: Fix display of the version string nfsd: fix configuration of supported minor versions sunrpc: don't register UDP port with rpcbind when version needs congestion control nfs/nfsd/sunrpc: enforce transport requirements for NFSv4 sunrpc: flag transports as having congestion control sunrpc: turn bitfield flags in svc_version into bools nfsd: remove superfluous KERN_INFO nfsd: special case truncates some more nfsd: minor nfsd_setattr cleanup NFSD: Reserve adequate space for LOCKT operation NFSD: Get response size before operation for all RPCs nfsd/callback: Drop a useless data copy when comparing sessionid nfsd/callback: skip the callback tag nfsd/callback: Cleanup callback cred on shutdown nfsd/idmap: return nfserr_inval for 0-length names SUNRPC/Cache: Always treat the invalid cache as unexpired SUNRPC: Drop all entries from cache_detail when cache_purge() svcrdma: Poll CQs in "workqueue" mode svcrdma: Combine list fields in struct svc_rdma_op_ctxt svcrdma: Remove unused sc_dto_q field ...
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "This time around we have: - support for rbd data-pool feature, which enables rbd images on erasure-coded pools (myself). CEPH_PG_MAX_SIZE has been bumped to allow erasure-coded profiles with k+m up to 32. - a patch for ceph_d_revalidate() performance regression introduced in 4.9, along with some cleanups in the area (Jeff Layton) - a set of fixes for unsafe ->d_parent accesses in CephFS (Jeff Layton) - buffered reads are now processed in rsize windows instead of rasize windows (Andreas Gerstmayr). The new default for rsize mount option is 64M. - ack vs commit distinction is gone, greatly simplifying ->fsync() and MOSDOpReply handling code (myself) ... also a few filesystem bug fixes from Zheng, a CRUSH sync up (CRUSH computations are still serialized though) and several minor fixes and cleanups all over" * tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client: (52 commits) libceph, rbd, ceph: WRITE | ONDISK -> WRITE libceph: get rid of ack vs commit ceph: remove special ack vs commit behavior ceph: tidy some white space in get_nonsnap_parent() crush: fix dprintk compilation crush: do is_out test only if we do not collide ceph: remove req from unsafe list when unregistering it rbd: constify device_type structure rbd: kill obj_request->object_name and rbd_segment_name_cache rbd: store and use obj_request->object_no rbd: RBD_V{1,2}_DATA_FORMAT macros rbd: factor out __rbd_osd_req_create() rbd: set offset and length outside of rbd_obj_request_create() rbd: support for data-pool feature rbd: introduce rbd_init_layout() rbd: use rbd_obj_bytes() more rbd: remove now unused rbd_obj_request_wait() and helpers rbd: switch rbd_obj_method_sync() to ceph_osdc_call() libceph: pass reply buffer length through ceph_osdc_call() rbd: do away with obj_request in rbd_obj_read_sync() ...
-
Mike Snitzer authored
This version bump reflects that the reshape corruption fix (commit 92a39f6cc "dm raid: fix data corruption on reshape request") is present. Done as a separate fix because the above referenced commit is marked for stable and target version bumps in a stable@ fix are a recipe for the fix to never get backported to stable@ kernels (because of target version number conflicts). Also, move RESUME_STAY_FROZEN_FLAGS up with the reset the the _FLAGS definitions now that we don't need to worry about stable@ conflicts as a result of missing context. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Heinz Mauelshagen authored
The lvm2 sequence to manage dm-raid constructor flags that trigger a rebuild or a reshape is defined as: 1) load table with flags (e.g. rebuild/delta_disks/data_offset) 2) clear out the flags in lvm2 metadata 3) store the lvm2 metadata, reload the table to reset the flags previously established during the initial load (1) -- in order to prevent repeatedly requesting a rebuild or a reshape on activation Currently, loading an inactive table with rebuild/reshape flags specified will cause dm-raid to rebuild/reshape on resume and thus start updating the raid metadata (about the progress). When the second table reload, to reset the flags, occurs the constructor accesses the volatile progress state kept in the raid superblocks. Because the active mapping is still processing the rebuild/reshape, that position will be stale by the time the device is resumed. In the reshape case, this causes data corruption by processing already reshaped stripes again. In the rebuild case, it does _not_ cause data corruption but instead involves superfluous rebuilds. Fix by keeping the raid set frozen during the first resume and then allow the rebuild/reshape during the second resume. Fixes: 9dbd1aa3 ("dm raid: add reshaping support to the target") Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.8+
-