- 11 Dec, 2013 7 commits
-
-
Jeff Kirsher authored
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Jeff Kirsher authored
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Simon Kelley <simon@thekelleys.org.uk> CC: Christian Lamparter <chunkeey@googlemail.com> CC: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by:
-
Jeff Kirsher authored
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: "Luis R. Rodriguez" <mcgrof@gmail.com> Signed-off-by:
-
Jeff Kirsher authored
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Ivo van Doorn <IvDoorn@gmail.com> CC: Gertjan van Wingerde <gwingerde@gmail.com> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Jeff Kirsher authored
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Daniel Drake <dsd@gentoo.org> CC: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by:
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
-
- 10 Dec, 2013 1 commit
-
-
Johan Hedberg authored
If we receive an L2CAP command reject message over LE we should take appropriate action on the corresponding channel. This is particularly important when trying to interact with a remote pre-4.1 system using LE CoC signaling messages. If we don't react to the command reject the corresponding socket would not be notified until a connection timeout occurs. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
- 09 Dec, 2013 32 commits
-
-
Sujith Manoharan authored
Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
The internal regulator needs to be programmed correctly for AR955x. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Adjusting the CCA registers for maximum permissible noise floor in ETSI/Japan domains has to be done for all AR9003 family chips. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Now that the Buffalo-specific initvals have been moved to a separate array, update the default high power TX gain table for all AR9300 v2.2 devices. Signed-off-by:
-
Sujith Manoharan authored
The Buffalo device WZR-HP-G450H uses the index 3 for TX gain, which is set to the high_power table currently. Later variants of the router use the same index, but instead refer to the low_ob_db gain table. This is not handled in the driver since there is no way to distinguish board revisions and the high_power table is used (incorrectly) for the newer variants. By default, devices based on AR9300 using the TX gain index 3 have to use the high_power table. To make sure that WZR-HP-G450H is not broken when the high_power table is updated, use a separate array based on information obtained from the platform data. The current situation where only the original variant of WZR-HP-G450H works properly stays unchanged. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
* Update radio/baseband/gain tables. * Mark ar9331_modes_high_power_tx_gain_1p1 as a duplicate * ar9331_1p1_mac_postamble is not a duplicate. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Enable the ALWAYS_KEYSEARCH bit in the initvals. Currently this is done in the driver, but adding this to the initvals makes it easier to be in sync with the INI files given by the systems engineering team. Signed-off-by:
-
Sujith Manoharan authored
Certain baseband registers require different values to be programmed when operating in a DFS channel to ensure that radar detection works correctly. This is required for AR9300, AR9340 and AR9580. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Larry Finger authored
Sparse reports the following: CHECK drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:570:34: warning: dubious: !x & y There should be a parens around the expression. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Chun-Yeow Yeoh authored
Enable the beaconing in wnc36xx by tweaking the tim offset and force the use of AP-style beaconing. Otherwise, beaconing is not working. The tim offset is set to 256. Otherwise, this will overwrite mesh beacon submitted by mac80211. Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by:
-
Chun-Yeow Yeoh authored
Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by:
-
Ujjal Roy authored
When TX data URB reaches high water mark the message "data: -ENOSR is returned" is printed. This is not an error case, so change it to debug print. Signed-off-by:
Ujjal Roy <royujjal@gmail.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
The check for 'priv' pointer is redundant. 'priv' won't be used later in this routine. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Ujjal Roy authored
The bridged packets are updated to statistics on both TX and RX paths. Also fix a typo in the comment. Signed-off-by:
-
Ujjal Roy authored
The skb is modified in sending the TX packet. Save the original packet length to a variable so that we can get the correct statistics update. Signed-off-by:
-
Ujjal Roy authored
The skb is modified in processing the RX packet. Save the original packet length to a variable so that we can get the correct statistics update. Signed-off-by:
-
Ujjal Roy authored
RX packets are handled in different paths. Not all paths have decrement of rx_pending counter. This patch fixes the counter imbalance. Signed-off-by:
-
Bing Zhao authored
eth_hdr is defined in kernel. Use a different variable name in our functions. Signed-off-by:
-
Amitkumar Karwar authored
SNAP/LLC header in the AARP packet is being stripped off while preparing an EthernetII header. Annex M, Table M.3 in 802.11 spec says that some header (ex. AppleTalk AARP(2)) should pass through untouched. This patch modifies the check to exclude/include EthernetII header translation for special cases. Signed-off-by:
-
Amitkumar Karwar authored
Use 'rfc1042_header' available in net/wireless/util.c Signed-off-by:
-
Amitkumar Karwar authored
Actually we are updating snap_type with h_proto (__be16 variable) in ethernet frame header. Hence endianness conversion is not required. Signed-off-by:
-
Ujjal Roy authored
The firmware expects the command structure members in little endianness. Signed-off-by:
-
Jingoo Han authored
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
