- 07 Nov, 2013 1 commit
-
-
Ben Widawsky authored
v2: Fixed the botched locking on init_hw failure in i915_reset (Ville) Call cleanup_ringbuffer on failed context create in init_hw (Ville) v3: Add dev argument ti clean_ringbuffer Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 Nov, 2013 3 commits
-
-
Ville Syrjälä authored
We'll be looking at more than just mem_freq from dev_priv, so just pass the whole thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
We're currently miscalculating the VLV graphics clock a little bit. This is caused by rounding the step to integer MHz, which does not match reality. Change the formula to match the GUnit HAS to give more accurate answers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
valleyview_modeset_global_pipes() may add pipes that are getting fully disabled to prepare_pipes bitmask. The rest of the code doesn't expect this, so clear out any such pipes from the prepare_pipes bitmask. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 05 Nov, 2013 5 commits
-
-
Jesse Barnes authored
Either the docs were wrong or the values have changed since the old days before we had wheels. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
It's possible that the CCK clock could run at a different rate than the DDR clock, so use the same method to get CCK as the GMBUS code does when calculating the new CDclk divider in the VLV display code. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
On VLV/BYT, we can adjust the CDclk frequency up or down based on the max pixel clock we need to drive. Lowering it can save power, while raising it is necessary to support high resolution. Add a new callback in modeset_affected_pipes and a modeset_global_resources function to perform this adjustment as necessary. v2: use punit interface for 320 and 266 MHz CDclk adjustments (Ville) v3: reset GMBUS dividers too, since we changed CDclk (Ville) v4: jump to highest voltage when going to 400MHz CDclk (Jesse) v5: drop duplicate define (Ville) use shifts by 1 for fixed point (Ville) drop new callback (Daniel) v6: fixup adjusted_mode.clock -> adjusted_mode.crtc_clock again (Ville) document Bunit reg access better (Ville) v7: pass modeset_pipes and pipe_config to global_pipes so we get the right clock data (Ville) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
We don't want it delayed with the RPS work. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
For modifying self-refresh exit latency. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 04 Nov, 2013 3 commits
-
-
Daniel Vetter authored
With the change in the modeset sequence this shouldn't be required any more since the ->mode_set callback now gets called when the dvo port is fully up and running. Also limit the retry loop to 10 tries to avoid hanging the machine while holding important modeset locks. Cc: Thomas Richter <thor@math.tu-berlin.de> Tested-by: Thomas Richter <thor@math.tu-berlin.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
The ns2501 controller seems to need the dpll and dvo port to accept the timing update commands. Quick testing on my x30 here seems to indicate that other dvo controllers don't mind. So let's move the ->mode_set callback to a place where we have the port up and running already. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thomas Richter <thor@math.tu-berlin.de> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
I want to merge in the new Broadwell support as a late hw enabling pull request. But since the internal branch was based upon our drm-intel-nightly integration branch I need to resolve all the oustanding conflicts in drm/i915 with a backmerge to make the 60+ patches apply properly. We'll propably have some fun because Linus will come up with a slightly different merge solution. Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_drv.c drivers/gpu/drm/i915/intel_crt.c drivers/gpu/drm/i915/intel_ddi.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_dp.c drivers/gpu/drm/i915/intel_drv.h All rather simple adjacent lines changed or partial backports from -next to -fixes, with the exception of the thaw code in i915_dma.c. That one needed a bit of shuffling to restore the intent. Oh and the massive header file reordering in intel_drv.h is a bit trouble. But not much. v2: Also don't forget the fixup for the silent conflict that results in compile fail ... Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 Nov, 2013 3 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Three fixes across arch/mips with the most complex one being the GIC interrupt fix - at nine lines still not monster. I'm confident this are the final MIPS patches even if there should go for an rc8" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: fix return value check in rt_timer_probe() MIPS: malta: Fix GIC interrupt offsets MIPS: Perf: Fix 74K cache map
-
Mathias Krause authored
Negative message lengths make no sense -- so don't do negative queue lenghts or identifier counts. Prevent them from getting negative. Also change the underlying data types to be unsigned to avoid hairy surprises with sign extensions in cases where those variables get evaluated in unsigned expressions with bigger data types, e.g size_t. In case a user still wants to have "unlimited" sizes she could just use INT_MAX instead. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Nov, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull ARM kallsyms fix from Rusty Russell: "Last minute perf unbreakage for ARM modules; spent a day in linux-next" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scripts/kallsyms: filter symbols not in kernel address space
-
Vineet Gupta authored
A vmalloc fault needs to sync up PGD/PTE entry from init_mm to current task's "active_mm". ARC vmalloc fault handler however was using mm. A vmalloc fault for non user task context (actually pre-userland, from init thread's open for /dev/console) caused the handler to deref NULL mm (for mm->pgd) The reasons it worked so far is amazing: 1. By default (!SMP), vmalloc fault handler uses a cached value of PGD. In SMP that MMU register is repurposed hence need for mm pointer deref. 2. In pre-3.12 SMP kernel, the problem triggering vmalloc didn't exist in pre-userland code path - it was introduced with commit 20bafb3d "n_tty: Move buffers into n_tty_data" Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Noam Camus <noamc@ezchip.com> Cc: stable@vger.kernel.org #3.10 and 3.11 Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 01 Nov, 2013 23 commits
-
-
Ming Lei authored
This patch uses CONFIG_PAGE_OFFSET to filter symbols which are not in kernel address space because these symbols are generally for generating code purpose and can't be run at kernel mode, so we needn't keep them in /proc/kallsyms. For example, on ARM there are some symbols which may be linked in relocatable code section, then perf can't parse symbols any more from /proc/kallsyms, this patch fixes the problem (introduced b9b32bf7) Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Two fixes: - Fix 'NMI handler took too long to run' false positives [ Genuine NMI overhead speedups will come for v3.13, this commit only fixes a measurement bug ] - Fix perf ring-buffer missed barrier causing (rare) ring-buffer data corruption on ppc64" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix NMI measurements perf: Fix perf ring buffer memory ordering
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here is a set of patches that revert all of the changes done to the pl2303 USB serial driver in the 3.12-rc timeframe, as it turns out they break some devices that work just fine on 3.11. As it's not a good idea to break working systems, drop them all and they will be reworked for future kernel versions such that there is no breakage. I've also included a MAINTAINERS update for the USB serial subsystem and a new device id for the ftdi_sio driver as well" * tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: ftdi_sio: add id for Z3X Box device USB: Maintainers change for usb serial drivers Revert "USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type" Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method" Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method" Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates" Revert "usb: pl2303: move the two baud rate encoding methods to separate functions" Revert "usb: pl2303: increase the allowed baud rate range for the divisor based encoding method" Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips" Revert "usb: pl2303: add two comments concerning the supported baud rates with HX chips" Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()" Revert "pl2303: improve the chip type information output on startup" Revert "pl2303: improve the chip type detection/distinction" Revert "USB: pl2303: distinguish between original and cloned HX chips"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull more sound fixes from Takashi Iwai: "The fixes for random bugs that have been reported lately in the game: a few fixes in ASoC dpam and wm_hubs bugs spotted by Coverity, a one-liner HD-audio fixup, and a fix for Oops with DPCM. They are not so critically urgent bugs, but all small and safe" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM ASoC: wm_hubs: Add missing break in hp_supply_event() ALSA: hda - Add a fixup for ASUS N76VZ ASoC: dapm: Return -ENOMEM in snd_soc_dapm_new_dai_widgets() ASoC: dapm: Fix source list debugfs outputs
-
git://git.linaro.org/people/mturquette/linuxLinus Torvalds authored
Pull clock subsystem fixes from Mike Turquette. * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: fixup argument order when setting VCO parameters clk: socfpga: Fix incorrect sdmmc clock name clk: armada-370: fix tclk frequencies clk: nomadik: set all timers to use 2.4 MHz TIMCLK
-
Greg Thelen authored
When a memcg is deleted mem_cgroup_reparent_charges() moves charged memory to the parent memcg. As of v3.11-9444-g3ea67d06 "memcg: add per cgroup writeback pages accounting" there's bad pointer read. The goal was to check for counter underflow. The counter is a per cpu counter and there are two problems with the code: (1) per cpu access function isn't used, instead a naked pointer is used which easily causes oops. (2) the check doesn't sum all cpus Test: $ cd /sys/fs/cgroup/memory $ mkdir x $ echo 3 > /proc/sys/vm/drop_caches $ (echo $BASHPID >> x/tasks && exec cat) & [1] 7154 $ grep ^mapped x/memory.stat mapped_file 53248 $ echo 7154 > tasks $ rmdir x <OOPS> The fix is to remove the check. It's currently dangerous and isn't worth fixing it to use something expensive, such as percpu_counter_sum(), for each reparented page. __this_cpu_read() isn't enough to fix this because there's no guarantees of the current cpus count. The only guarantees is that the sum of all per-cpu counter is >= nr_pages. Fixes: 3ea67d06 ("memcg: add per cgroup writeback pages accounting") Reported-and-tested-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Greg Thelen <gthelen@google.com> Reviewed-by: Sha Zhengju <handai.szj@taobao.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paulo Zanoni authored
Even though we only check for unclaimed registers while we're writing registers, if we read a bad register we'll still trigger a CPU error interrupt, and we'll print an "Unclaimed register" DRM_ERROR due to that. To avoid this error, just avoid touching power domains that are not enabled. Use kzalloc so we're sure all the disabled domains will be zeroed on the error state file. We already print the information that is enough to discover if the power well is enabled on the error state file, so this should not be a problem. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69747Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Now that DP port CRCs are stable, we can use it for generic CRC tests. Yay, the auto CRC source should now work everywhere! Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
They've moved the DC balance reset bit around. Again I don't think we need it, but better safe than sorry and maybe HDMI port CRC will prove useful for checking infoframes or hdmi audio. v2: Apply the suggestions from Damien's review. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
We need to reset the DP scrambler on every vsync to get stable CRCs. And since we can't use the normal pipe CRC on DP ports on g4x we really need them to be able to test modesetting issues on (e)DP outputs. Note that the DC balance reset is for SDVO port CRCs so we don't strictly need it. But better safe than sorry (and it's a nice template in case we ever want to grab port CRCs for e.g. audio checking). v2: Apply the suggestions from Damien's review. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
On gmch platforms the normal pipe source CRC registers don't work for DP and TV encoders. And on newer platforms the single pipe CRC has been replaced by a set of CRC at different stages in the platform. Now most of our userspace tests don't care one bit about the exact CRC, they simply want something that reflects any changes on the screen. Hence add a new auto target for platform agnostic tests to use. v2: Pass back the adjusted source so that it can be shown in debugfs. v3: I seem to be unable to get a stable CRC for DP ports. So let's just disable them for now when using the auto mode. Note that testcases need to be restructured so that they can dynamically skip connectors. They also first need to set up the desired mode configuration, since otherwise the auto mode won't do the right thing. v4: Don't leak the modeset mutex on error paths. v5: Spelling fix for the i9xx auto_source function. Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Алексей Крамаренко authored
Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg KH authored
Johan has been conned^Wgracious in accepting the maintainership of the USB serial drivers, especially as he's been doing all of the real work for the past few years. At the same time, remove a bunch of old entries for USB serial drivers that don't make sense anymore, given that the developers are no longer around, and individual driver maintainerships for tiny things like this is pretty pointless. Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit b8bdad60. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit 57ce61aa. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method" This reverts commit 75417d9f. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit b9208c72. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit e917ba01. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit b5c16c6a. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips" This reverts commit 61fa8d69. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit c23bda36. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit 73b583af. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit a77a8c23. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-