- 25 Jul, 2013 36 commits
-
-
Takashi Iwai authored
commit cc7282b8 upstream. snd_pcm_stop() must be called in the PCM substream lock context. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 46f6c1aa upstream. snd_pcm_stop() must be called in the PCM substream lock context. Acked-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit 9538aa46 upstream. snd_pcm_stop() must be called in the PCM substream lock context. Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Iwai authored
commit 5b9ab3f7 upstream. snd_pcm_stop() must be called in the PCM substream lock context. Signed-off-by:
-
Takashi Iwai authored
commit 256ca9c3 upstream. We've got bug reports that the module loading stuck on Debian system with 3.10 kernel. The debugging session revealed that the initial registration of OSS sequencer clients stuck at module loading time, which involves again with request_module() at the init phase. This is triggered only by special --install stuff Debian is using, but it's still not good to have such loops. As a workaround, call the registration part asynchronously. This is a better approach irrespective of the hang fix, in anyway. Reported-and-tested-by:
Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by:
-
Aaron Plattner authored
commit d52392b1 upstream. Vendor ID 0x10de0060 is used by a yet-to-be-named GPU chip. Reviewed-by:
Andy Ritger <aritger@nvidia.com> Signed-off-by:
Aaron Plattner <aplattner@nvidia.com> Signed-off-by:
-
Takashi Iwai authored
commit 0c055b34 upstream. add_control_with_pfx() in hda_generic.c assumes a shorter name string for the control element, and this resulted in the truncation of the long but valid string like "Headphone Surround Switch" in the middle. This patch aligns the max size to the actual limit of snd_ctl_elem_id, 44. Signed-off-by:
-
Takashi Iwai authored
commit d045c5dc upstream. Some VIA codecs like VT1708S have Mic boost amps in the mic pins but they aren't exposed in the capability bits. In the past driver code, we override the pin caps and create mic boost controls forcibly. While transition to the generic parser, we lost the mic boost controls although the pin caps are still overridden, because the generic parser code checks the widget caps, too. So this patch adds a new helper function to allow the override of the given widget capability bits, and makes VIA codecs driver to add the missing input-amp capability bit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59861Signed-off-by:
-
Takashi Iwai authored
commit bddee96b upstream. When a selection to a converter MUX is changed in hdmi_pcm_open(), it should be cached so that the given connection can be restored properly at PM resume. We need just to replace the corresponding snd_hda_codec_write() call with snd_hda_codec_write_cache(). Signed-off-by:
-
Takashi Iwai authored
commit 06ec56d3 upstream. The refactoring by commit 9040d102 introduced the new function snd_hda_check_power_state(). This function is supposed to return true if the state already reached to the target state, but it actually returns false for that. An utterly stupid typo while copy & paste. Fortunately this didn't influence on much behavior because powering up AFG usually powers up the child widgets, too. But the finer power control must have been broken by this bug. Signed-off-by:
-
Takashi Iwai authored
commit 8f0b3b7e upstream. ad1884_fixup_hp_eapd() tries to set the NID for controlling the speaker EAPD from the pin configuration. But the current code can't work expectedly since it sets spec->eapd_nid before calling the generic parser where the autocfg pins are set up. This patch changes the function to set spec->eapd_nid after the generic parser call while it sets vmaster hook unconditionally. The spec->eapd_nid check is moved in the hook function itself instead. Signed-off-by:
-
Alexandre Belloni authored
commit f91d1b63 upstream. When reading IIO_CHAN_INFO_OFFSET, the return value of iio_channel_read() for success will be IIO_VAL*, checking for 0 is not correct. Without this fix the offset applied by iio drivers will be ignored when converting a raw value to one in appropriate base units (e.g mV) in a IIO client drivers that use iio_convert_raw_to_processed including iio-hwmon. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Alexandre Belloni authored
commit 1c297a66 upstream. Since the info_mask split, iio_channel_has_info() is not working correctly. info_mask_separate and info_mask_shared_by_type, it is not possible to compare them directly with the iio_chan_info_enum enum. Correct that bit using the BIT() macro. Signed-off-by:
-
Will Deacon authored
commit db6f4106 upstream. On arm64, cache maintenance faults appear as data aborts with the CM bit set in the ESR. The WnR bit, usually used to distinguish between faulting loads and stores, always reads as 1 and (slightly confusingly) the instructions are treated as reads by the architecture. This patch fixes our fault handling code to treat cache maintenance faults in the same way as loads. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Srivatsa S. Bhat authored
commit e8d05276 upstream. commit 2f7021a8 "cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work()" caused a regression in CPU hotplug, because it lead to a deadlock between cpufreq governor worker thread and the CPU hotplug writer task. Lockdep splat corresponding to this deadlock is shown below: [ 60.277396] ====================================================== [ 60.277400] [ INFO: possible circular locking dependency detected ] [ 60.277407] 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 Not tainted [ 60.277411] ------------------------------------------------------- [ 60.277417] bash/2225 is trying to acquire lock: [ 60.277422] ((&(&j_cdbs->work)->work)){+.+...}, at: [<ffffffff810621b5>] flush_work+0x5/0x280 [ 60.277444] but task is already holding lock: [ 60.277449] (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.277465] which lock already depends on the new lock. [ 60.277472] the existing dependency chain (in reverse order) is: [ 60.277477] -> #2 (cpu_hotplug.lock){+.+.+.}: [ 60.277490] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277503] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277514] [<ffffffff81042cbc>] get_online_cpus+0x3c/0x60 [ 60.277522] [<ffffffff814b842a>] gov_queue_work+0x2a/0xb0 [ 60.277532] [<ffffffff814b7891>] cs_dbs_timer+0xc1/0xe0 [ 60.277543] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277552] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277560] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277569] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277580] -> #1 (&j_cdbs->timer_mutex){+.+...}: [ 60.277592] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277600] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277608] [<ffffffff814b785d>] cs_dbs_timer+0x8d/0xe0 [ 60.277616] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277624] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277633] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277640] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277649] -> #0 ((&(&j_cdbs->work)->work)){+.+...}: [ 60.277661] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.277669] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277677] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.277685] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.277693] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.277701] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.277709] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.277719] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.277728] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.277737] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.277747] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.277759] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.277768] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.277779] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.277788] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.277796] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.277806] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.277818] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.277826] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.277834] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.277842] other info that might help us debug this: [ 60.277848] Chain exists of: (&(&j_cdbs->work)->work) --> &j_cdbs->timer_mutex --> cpu_hotplug.lock [ 60.277864] Possible unsafe locking scenario: [ 60.277869] CPU0 CPU1 [ 60.277873] ---- ---- [ 60.277877] lock(cpu_hotplug.lock); [ 60.277885] lock(&j_cdbs->timer_mutex); [ 60.277892] lock(cpu_hotplug.lock); [ 60.277900] lock((&(&j_cdbs->work)->work)); [ 60.277907] *** DEADLOCK *** [ 60.277915] 6 locks held by bash/2225: [ 60.277919] #0: (sb_writers#6){.+.+.+}, at: [<ffffffff81168173>] vfs_write+0x1c3/0x1f0 [ 60.277937] #1: (&buffer->mutex){+.+.+.}, at: [<ffffffff811d9e3c>] sysfs_write_file+0x3c/0x150 [ 60.277954] #2: (s_active#61){.+.+.+}, at: [<ffffffff811d9ec3>] sysfs_write_file+0xc3/0x150 [ 60.277972] #3: (x86_cpu_hotplug_driver_mutex){+.+...}, at: [<ffffffff81024cf7>] cpu_hotplug_driver_lock+0x17/0x20 [ 60.277990] #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff815a0d32>] cpu_down+0x22/0x50 [ 60.278007] #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.278023] stack backtrace: [ 60.278031] CPU: 3 PID: 2225 Comm: bash Not tainted 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 [ 60.278037] Hardware name: Acer Aspire 5741G /Aspire 5741G , BIOS V1.20 02/08/2011 [ 60.278042] ffffffff8204e110 ffff88014df6b9f8 ffffffff815b3d90 ffff88014df6ba38 [ 60.278055] ffffffff815b0a8d ffff880150ed3f60 ffff880150ed4770 3871c4002c8980b2 [ 60.278068] ffff880150ed4748 ffff880150ed4770 ffff880150ed3f60 ffff88014df6bb00 [ 60.278081] Call Trace: [ 60.278091] [<ffffffff815b3d90>] dump_stack+0x19/0x1b [ 60.278101] [<ffffffff815b0a8d>] print_circular_bug+0x2b6/0x2c5 [ 60.278111] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.278123] [<ffffffff81067e08>] ? __kernel_text_address+0x58/0x80 [ 60.278134] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.278142] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278151] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.278159] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278169] [<ffffffff810a9b14>] ? mark_held_locks+0x94/0x140 [ 60.278178] [<ffffffff81062d77>] ? __cancel_work_timer+0x77/0x120 [ 60.278188] [<ffffffff810a9cbd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 60.278196] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.278206] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.278214] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.278225] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.278234] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.278244] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.278255] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.278265] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.278275] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.278284] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.278292] [<ffffffff81024cf7>] ? cpu_hotplug_driver_lock+0x17/0x20 [ 60.278302] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.278311] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.278320] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.278329] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.278337] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.278347] [<ffffffff81185950>] ? fget_light+0x320/0x4b0 [ 60.278355] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.278364] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.280582] smpboot: CPU 1 is now offline The intention of that commit was to avoid warnings during CPU hotplug, which indicated that offline CPUs were getting IPIs from the cpufreq governor's work items. But the real root-cause of that problem was commit a66b2e50 (cpufreq: Preserve sysfs files across suspend/resume) because it totally skipped all the cpufreq callbacks during CPU hotplug in the suspend/resume path, and hence it never actually shut down the cpufreq governor's worker threads during CPU offline in the suspend/resume path. Reflecting back, the reason why we never suspected that commit as the root-cause earlier, was that the original issue was reported with just the halt command and nobody had brought in suspend/resume to the equation. The reason for _that_ in turn, as it turns out, is that earlier halt/shutdown was being done by disabling non-boot CPUs while tasks were frozen, just like suspend/resume.... but commit cf7df378 (reboot: migrate shutdown/reboot to boot cpu) which came somewhere along that very same time changed that logic: shutdown/halt no longer takes CPUs offline. Thus, the test-cases for reproducing the bug were vastly different and thus we went totally off the trail. Overall, it was one hell of a confusion with so many commits affecting each other and also affecting the symptoms of the problems in subtle ways. Finally, now since the original problematic commit (a66b2e50) has been completely reverted, revert this intermediate fix too (2f7021a8), to fix the CPU hotplug deadlock. Phew! Reported-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by:
Peter Wu <lekensteyn@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Srivatsa S. Bhat authored
commit aae760ed upstream. commit a66b2e (cpufreq: Preserve sysfs files across suspend/resume) has unfortunately caused several things in the cpufreq subsystem to break subtly after a suspend/resume cycle. The intention of that patch was to retain the file permissions of the cpufreq related sysfs files across suspend/resume. To achieve that, the commit completely removed the calls to cpufreq_add_dev() and __cpufreq_remove_dev() during suspend/resume transitions. But the problem is that those functions do 2 kinds of things: 1. Low-level initialization/tear-down that are critical to the correct functioning of cpufreq-core. 2. Kobject and sysfs related initialization/teardown. Ideally we should have reorganized the code to cleanly separate these two responsibilities, and skipped only the sysfs related parts during suspend/resume. Since we skipped the entire callbacks instead (which also included some CPU and cpufreq-specific critical components), cpufreq subsystem started behaving erratically after suspend/resume. So revert the commit to fix the regression. We'll revisit and address the original goal of that commit separately, since it involves quite a bit of careful code reorganization and appears to be non-trivial. (While reverting the commit, note that another commit f51e1eb6 (cpufreq: Fix cpufreq regression after suspend/resume) already reverted part of the original set of changes. So revert only the remaining ones). Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Tested-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Michael Ellerman authored
commit 4ea355b5 upstream. In power_pmu_enable() we still enable the PMU even if we have zero events. This should have no effect but doesn't make much sense. Instead just return after telling the hypervisor that we are not using the PMCs. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Ellerman authored
commit 0a48843d upstream. In power_pmu_enable() we can use the existing out label to reduce the number of return paths. Signed-off-by:
-
Michael Ellerman authored
commit 7a7a41f9 upstream. On Power8 we can freeze PMC5 and 6 if we're not using them. Normally they run all the time. As noticed by Anshuman, we should unfreeze them when we disable the PMU as there are legacy tools which expect them to run all the time. Signed-off-by:
-
Michael Ellerman authored
commit 378a6ee9 upstream. In pmu_disable() we disable the PMU by setting the FC (Freeze Counters) bit in MMCR0. In order to do this we have to read/modify/write MMCR0. It's possible that we read a value from MMCR0 which has PMAO (PMU Alert Occurred) set. When we write that value back it will cause an interrupt to occur. We will then end up in the PMU interrupt handler even though we are supposed to have just disabled the PMU. We can avoid this by making sure we never write PMAO back. We should not lose interrupts because when the PMU is re-enabled the overflowed values will cause another interrupt. We also reorder the clearing of SAMPLE_ENABLE so that is done after the PMU is frozen. Otherwise there is a small window between the clearing of SAMPLE_ENABLE and the setting of FC where we could take an interrupt and incorrectly see SAMPLE_ENABLE not set. This would for example change the logic in perf_read_regs(). Signed-off-by:
-
Michael Ellerman authored
commit d8bec4c9 upstream. A mistake we have made in the past is that we pull out the fields we need from the event code, but don't check that there are no unknown bits set. This means that we can't ever assign meaning to those unknown bits in future. Although we have once again failed to do this at release, it is still early days for Power8 so I think we can still slip this in and get away with it. Signed-off-by:
-
Nathan Fontenot authored
commit dd023217 upstream. The topology update code that updates the cpu node registration in sysfs should not be called while in stop_machine(). The register/unregister calls take a lock and may sleep. This patch moves these calls outside of the call to stop_machine(). Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Chen Gang authored
commit 8246aca7 upstream. the smp_release_cpus is a normal funciton and called in normal environments, but it calls the __initdata spinning_secondaries. need modify spinning_secondaries to match smp_release_cpus. the related warning: (the linker report boot_paca.33377, but it should be spinning_secondaries) ----------------------------------------------------------------------------- WARNING: arch/powerpc/kernel/built-in.o(.text+0x23176): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377 The function .smp_release_cpus() references the variable __initdata boot_paca.33377. This is often because .smp_release_cpus lacks a __initdata annotation or the annotation of boot_paca.33377 is wrong. WARNING: arch/powerpc/kernel/built-in.o(.text+0x231fe): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377 The function .smp_release_cpus() references the variable __initdata boot_paca.33377. This is often because .smp_release_cpus lacks a __initdata annotation or the annotation of boot_paca.33377 is wrong. ----------------------------------------------------------------------------- Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Michael Ellerman authored
commit b14b6260 upstream. Similar to the facility unavailble exception, except the facilities are controlled by HFSCR. Adapt the facility_unavailable_exception() so it can be called for either the regular or Hypervisor facility unavailable exceptions. Signed-off-by:
-
Michael Ellerman authored
commit 021424a1 upstream. The exception at 0xf60 is not the TM (Transactional Memory) unavailable exception, it is the "Facility Unavailable Exception", rename it as such. Flesh out the handler to acknowledge the fact that it can be called for many reasons, one of which is TM being unavailable. Use STD_EXCEPTION_COMMON() for the exception body, for some reason we had it open-coded, I've checked the generated code is identical. Signed-off-by:
-
Michael Ellerman authored
commit c9f69518 upstream. KVMTEST is a macro which checks whether we are taking an exception from guest context, if so we branch out of line and eventually call into the KVM code to handle the switch. When running real guests on bare metal (HV KVM) the hardware ensures that we never take a relocation on exception when transitioning from guest to host. For PR KVM we disable relocation on exceptions ourself in kvmppc_core_init_vm(), as of commit a413f474 "Disable relocation on exceptions whenever PR KVM is active". So convert all the RELON macros to use NOTEST, and drop the remaining KVM_HANDLER() definitions we have for 0xe40 and 0xe80. Signed-off-by:
-
Michael Ellerman authored
commit 1d567cb4 upstream. We have relocation on exception handlers defined for h_data_storage and h_instr_storage. However we will never take relocation on exceptions for these because they can only come from a guest, and we never take relocation on exceptions when we transition from guest to host. We also have a handler for hmi_exception (Hypervisor Maintenance) which is defined in the architecture to never be delivered with relocation on, see see v2.07 Book III-S section 6.5. So remove the handlers, leaving a branch to self just to be double extra paranoid. Signed-off-by:
-
Michael Neuling authored
commit 87b4e539 upstream. Currently we only restore signals which are transactionally suspended but it's possible that the transaction can be restored even when it's active. Most likely this will result in a transactional rollback by the hardware as the transaction will have been doomed by an earlier treclaim. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes assumptions based on having software rollback. This changes the signal return code to always restore both contexts on 64 bit signal return. It also ensures that the MSR TM bits are properly restored from the signal context which they are not currently. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Michael Neuling authored
commit 55e43418 upstream. Currently we only restore signals which are transactionally suspended but it's possible that the transaction can be restored even when it's active. Most likely this will result in a transactional rollback by the hardware as the transaction will have been doomed by an earlier treclaim. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes assumptions based on having software rollback. This changes the signal return code to always restore both contexts on 32 bit rt signal return. Signed-off-by:
-
Michael Neuling authored
commit 2c27a18f upstream. Currently we clear out the MSR TM bits on signal return assuming that the signal should never return to an active transaction. This is bogus as the user may do this. It's most likely the transaction will be doomed due to a treclaim but that's a problem for the HW not the kernel. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes the assumption that it must be returning to a suspended transaction. This pulls out both MSR TM bits from the user supplied context rather than just setting TM suspend. We pull out only the bits needed to ensure the user can't do anything dangerous to the MSR. Signed-off-by:
-
Michael Neuling authored
commit fee55450 upstream. Currently sys_sigreturn() is TM unaware. Therefore, if we take a 32 bit signal without SIGINFO (non RT) inside a transaction, on signal return we don't restore the signal frame correctly. This checks if the signal frame being restoring is an active transaction, and if so, it copies the additional state to ptregs so it can be restored. Signed-off-by:
-
Michael Neuling authored
commit 1d25f11f upstream. The MSR TM controls are in the top 32 bits of the MSR hence on 32 bit signals, we stick the top half of the MSR in the checkpointed signal context so that the user can access it. Unfortunately, we don't currently write anything to the checkpointed signal context when coming in a from a non transactional process and hence the top MSR bits can contain junk. This updates the 32 bit signal handling code to always write something to the top MSR bits so that users know if the process is transactional or not and the kernel can use it on signal return. Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 74251fe2 upstream. So because those things always end up in trainwrecks... In 7846de40 we moved back the iommu initialization earlier, essentially undoing 37f02195 which was causing us endless trouble... except that in the meantime we had merged 959c9bdd (to workaround the original breakage) which is now ... broken :-) This fixes it by doing a partial revert of the latter (we keep the ppc_md. path which will be needed in the hotplug case, which happens also during some EEH error recovery situations). Signed-off-by:
-
Michael Neuling authored
commit e2a800be upstream. The Data Address Watchpoint Register (DAWR) on POWER8 can take a 512 byte range but this range must not cross a 512 byte boundary. Unfortunately we were off by one when calculating the end of the region, hence we were not allowing some breakpoint regions which were actually valid. This fixes this error. Signed-off-by:
Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Signed-off-by:
-
Michael Neuling authored
commit 540e07c6 upstream. In 9422de3e "powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers" we changed the way we mark extraneous irqs with this: - info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) && - (dar - bp->attr.bp_addr < bp->attr.bp_len)); + if (!((bp->attr.bp_addr <= dar) && + (dar - bp->attr.bp_addr < bp->attr.bp_len))) + info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; Unfortunately this is bogus as it never clears extraneous IRQ if it's already set. This correctly clears extraneous IRQ before possibly setting it. Signed-off-by:
-
Michael Neuling authored
commit b0b0aa9c upstream. The smallest match region for both the DABR and DAWR is 8 bytes, so the kernel needs to filter matches when users want to look at regions smaller than this. Currently we set the length of PPC_BREAKPOINT_MODE_EXACT breakpoints to 8. This is wrong as in exact mode we should only match on 1 address, hence the length should be 1. This ensures that the kernel will filter out any exact mode hardware breakpoint matches on any addresses other than the requested one. Signed-off-by:
-
- 22 Jul, 2013 4 commits
-
-
Greg Kroah-Hartman authored
-
Richard Genoud authored
commit beadadfa upstream. When mounting an UBIFS R/W volume, we have the message: UBIFS: mounted UBI device 0, volume 1, name "rootfs"(null) With this patch, we'll have: UBIFS: mounted UBI device 0, volume 1, name "rootfs" Which is, I think, what was intended. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Steve French authored
commit fdf96a90 upstream. This is RH bug 970891 Uppercasing of username during calculation of ntlmv2 hash fails because UniStrupr function does not handle big endian wchars. Also fix a comment in the same code to reflect its correct usage. [To make it easier for stable (rather than require 2nd patch) fixed this patch of Shirish's to remove endian warning generated by sparse -- steve f.] Reported-by:
steve <sanpatr1@in.ibm.com> Signed-off-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Wanpeng Li authored
commit cea27eb2 upstream. The logic for the memory-remove code fails to correctly account the Total High Memory when a memory block which contains High Memory is offlined as shown in the example below. The following patch fixes it. Before logic memory remove: MemTotal: 7603740 kB MemFree: 6329612 kB Buffers: 94352 kB Cached: 872008 kB SwapCached: 0 kB Active: 626932 kB Inactive: 519216 kB Active(anon): 180776 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296272 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5704696 kB LowTotal: 309068 kB LowFree: 624916 kB After logic memory remove: MemTotal: 7079452 kB MemFree: 5805976 kB Buffers: 94372 kB Cached: 872000 kB SwapCached: 0 kB Active: 626936 kB Inactive: 519236 kB Active(anon): 180780 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296292 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5181024 kB LowTotal: 4294752076 kB LowFree: 624952 kB [mhocko@suse.cz: fix CONFIG_HIGHMEM=n build] Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
