- 06 Jan, 2012 40 commits
-
-
Malcolm Priestley authored
Add BER monitoring with Pre-Viterbi error rate. Add UCBLOCKS based on Aborted packets. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Malcolm Priestley authored
Correction to tuner ID 0x51. Don't force tuner ID 0x60 unless eprom data zero. Signed-off-by:
-
Don Kramer authored
Adds support for the Plextor ConvertX PX-AV100U, which uses the eMPIA EM2820 chip. The device has a device_id of '0x093b, 0xa003'. I am using the existing EM2820_BOARD_PINNACLE_DVC_90 board profile, as the Pinnacle Dazzle DVC 90/100/101/107, Kaiser Baas Video to DVD maker, and Kworld DVD Maker 2 were already mapped to it. Some more background on the device and my testing can be found at http://www.donkramer.net/plextor_122710.pdfSigned-off-by:
Don Kramer <dgkramer@comcast.net> Signed-off-by:
-
Malcolm Priestley authored
Some channels appear weak signal after warm boot. Because tuner id is not present in eprom 0x38 is assigned. 9006 devices are now always assigned 0x60. Signed-off-by:
-
Malcolm Priestley authored
Fixes issues with PID filter Stalling of some channels when PID is on. PID filter not turning off fully. PID filter can now turn on and off each index. Removed PID_RST from it913x_pid_filter_ctrl. Replaced with PID_EN removed from it913x_pid_filter Signed-off-by:
-
Sylwester Nawrocki authored
The VIDIOC_LOG_STATUS ioctl allows to dump the current status of a driver to the kernel log. Currently this ioctl is only available at video device nodes and the subdevs rely on the host driver to expose their core.log_status operation to user space. This patch adds VIDIOC_LOG_STATUS support at the sub-device nodes, for standalone subdevs that expose their own /dev entry. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
The following ioctl sequence causes fimc_dma_run() to start processing without complete scaler and DMA initialization which causes missing interrupt and blocking on DQBUF: S_FMT, STREAMON, QBUF, DQBUF, STREAMOFF, STREAMON, QBUF, DQBUF. Fix this regression caused by moving pm_runtime* calls to start/stop_streaming callback by making sure the fimc_m2m_resume() is always invoked when expected. Reported-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
-
Jonathan Nieder authored
It is not common for dvb_net_init to fail, but after the patch "dvb_net_init: return -errno on error" it can fail due to running out of memory. Handle this. From an audit of dvb_net_init callers. Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Reviewed-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Jonathan Nieder authored
From an audit of dvb_net_init callers, now that that function returns -errno on error. Signed-off-by:
-
Jonathan Nieder authored
Clean up and error out if dvb_net_init fails (for example due to ENOMEM). This involves moving the dvb_net_init call to before frontend_init to make cleaning up a little easier. From an audit of dvb_net_init callers, now that dvb_net_init lets callers know about errors. Signed-off-by:
-
Jonathan Nieder authored
Clean up and error out if dvb_net_init fails (for example when running out of memory). From an audit of dvb_net_init callers, now that dvb_net_init has learned to return a nonzero value from time to time. [mchehab.redhat.com: codingstyle fix: printk() should include KERN_ facility level] Signed-off-by:
-
Jonathan Nieder authored
Bail out if dvb_net_init encounters an error (for example an out-of-memory condition), now that it reports them. [mchehab@redhat.com: CodingStyle fix: don't use "if ((ret = foo()) < 0)"] Signed-off-by:
-
Jonathan Nieder authored
Avoid some repetition by adopting the usual "goto err" idiom for error handling. Signed-off-by:
-
Jonathan Nieder authored
Repeating the same cleanup code in each error handling path makes life unnecessarily difficult for reviewers, who much check each instance of the same copy+pasted code separately. A "goto" to the end of the function is more maintainable and conveys the intent more clearly. While we're touching this code, also lift some assignments from "if" conditionals for simplicity. No functional change intended. Signed-off-by:
-
Jonathan Nieder authored
videobuf_dvb_register_bus relies on dvb_net_init to set dvbnet->dvbdev on success, but ever since commit fcc8e7d8 ("dvb_net: Simplify the code if DVB NET is not defined"), ->dvbdev is left unset when networking support is disabled. Therefore in such configurations videobuf_dvb_register_bus always returns failure, tripping little-tested error handling paths and preventing the device from being initialized and used. Now that dvb_net_init returns a nonzero value on error, we can use that as a more reliable error indication. Do so. Now your card be used with CONFIG_DVB_NET=n, and the kernel will pass on a more useful error code describing what happened when CONFIG_DVB_NET=y but dvb_net_init fails due to resource exhaustion. Reported-by:
David Fries <David@Fries.net> Signed-off-by:
-
Jonathan Nieder authored
dvb_net_init unconditionally returns 0. Callers such as videobuf_dvb_register_frontend examine dvbnet->dvbdev instead of the return value to tell whether the operation succeeded. If it has been set to a valid pointer, success; if it was left equal to NULL, failure. Alas, there is an edge case where that logic does not work as well: when network support has been compiled out (CONFIG_DVB_NET=n), we want dvb_net_init and related operations to behave as no-ops and always succeed, but there is no appropriate value to which to set dvb->dvbdev to indicate this. Let dvb_net_init return a meaningful error code, as preparation for adapting callers to look at that instead. The only immediate impact of this patch should be to make the few callers that already check for an error code from dvb_net_init behave a little more sensibly when it fails. Signed-off-by:
-
Malcolm Priestley authored
Turn the pid filter off by caps option only. This is so the full stream is passed to demuxer and not limited by pid count. Signed-off-by:
-
Hans Verkuil authored
The function v4l2_device_register() is called too late in vpif_probe(). This meant that vpif_obj.v4l2_dev is accessed before it is initialized which caused a crash. This used to work in the past, but video_register_device() is now actually using the v4l2_dev pointer. Note that vpif_display.c doesn't have this bug, there v4l2_device_register() is called at the beginning of vpif_probe. Signed-off-by:
Georgios Plakaris <gplakari@cisco.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Manjunath Hadli <Manjunath.hadli@ti.com> Signed-off-by:
-
Jonathan Corbet authored
Somehow I didn't ever quite get around to implementing suspend/resume on the MMP2 platform; this patch fixes that little oversight. A bit of core work was necessary to do the right thing in the s/g DMA case. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Malcolm Priestley authored
Turn the pid filter off by caps option only. This is so the full stream is passed to demuxer and not limited by pid count. Signed-off-by:
-
Holger Nelson authored
Reworked device probing to get rid of hacks to guess the maximum size of dvb iso transfer packets. The new code also selects the first alternate config which supports the largest possible iso transfers for dvb. [mchehab@redhat.com: Fix a few checkpatch.pl CodingStyle compliants] Signed-off-by:
Holger Nelson <hnelson@hnelson.de> Signed-off-by:
-
Gareth Williams authored
Adds support for the Honestech Vidbox NW03 USB capture device. Signed-off-by:
Gareth Williams <gareth@garethwilliams.me.uk> Signed-off-by:
-
Holger Nelson authored
This adds support for the Terratec Cinergy HTC USB XS which is similar to the Terratec H5 by adding the USB-ids to the table. According to http://linux.terratec.de it uses the same ICs and DVB-C works for me using the firmware of the H5. Signed-off-by:
-
Jonathan Nieder authored
dw2102_properties et al refer to entries in the USB-id table using hard-coded indices, as in "&dw2102_table[6]", which means adding new entries before the end of the list has the potential to introduce bugs in code elsewhere in the file. Use C99-style initializers with symbolic names for each index to avoid this. This way, other device tables wanting to reuse the USB ids can use expressions like "&dw2102_table[TEVII_S630]" that do not change as the entries in the table are reordered. Signed-off-by:
-
Julia Lawall authored
The conditional after the kzalloc says that the tested expression should never be true, but if it were, the allocated data would have to be freed. This change just moves the allocation below the test, to avoid any possibility of the problem. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
vpbe_dev needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
-
Dan Carpenter authored
There were some curly braces missing so the probe() function always failed. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
I changed the function definitions for dt3155_queue_setup() to match the newer API. The dt3155_start_streaming() function didn't do anything so I just removed it. This silences the following gcc warnings: drivers/staging/media/dt3155v4l/dt3155v4l.c:307:2: warning: initialization from incompatible pointer type [enabled by default] drivers/staging/media/dt3155v4l/dt3155v4l.c:307:2: warning: (near initialization for ‘q_ops.queue_setup’) [enabled by default] drivers/staging/media/dt3155v4l/dt3155v4l.c:311:2: warning: initialization from incompatible pointer type [enabled by default] drivers/staging/media/dt3155v4l/dt3155v4l.c:311:2: warning: (near initialization for ‘q_ops.start_streaming’) [enabled by default] Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Javier Martin authored
To properly detect frame loss the driver must keep track of a frame_count. Furthermore, field_count use was erroneous because in progressive format this must be incremented twice. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Javier Martin authored
This patch uses channel 2 of the eMMa-PrP to convert format provided by the sensor to YUV420. This format is very useful since it is used by the internal H.264 encoder. Signed-off-by:
-
Josh Wu authored
This patch - add ISI_MCK clock enable/disable code. - change field name in isi_platform_data structure Signed-off-by:
Josh Wu <josh.wu@atmel.com> [g.liakhovetski@gmx.de: fix label names] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Lei Wen authored
As our general practice, we use stream off before we close the video node. So that the drivers its stream off function would be called before its remove function. But for the case for ctrl+c, the program would be force closed. We have no chance to call that vb2 stream off from user space, but directly call the remove function in soc_camera. In that common code of soc_camera: ici->ops->remove(icd); if (ici->ops->init_videobuf2) vb2_queue_release(&icd->vb2_vidq); It would first call the device remove function, then release vb2, in which stream off function is called. Thus it create different order for the driver. This patch change the order to make driver see the same sequence to make it happy. Signed-off-by:Lei Wen <leiwen@marvell.com> Signed-off-by:
-
Guennadi Liakhovetski authored
mt9m111 camera sensors support cropping and scaling. The current implementation is broken. For example, .s_crop() sets output frame sizes instead of the input cropping window. This patch adds a proper implementation of these methods. Besides it adds a sensor-disable and -enable operations on first open() and last close() respectively, to save power while closed and to return the camera to the default power-on state. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Cleanly separating register contexts A and B will allow us to configure the contexts independently. Signed-off-by:
-
Guennadi Liakhovetski authored
The "pixfmt" parameter of the struct soc_camera_host_ops::set_bus_param() method is redundant, because at the time, when this method is called, pixfmt is guaranteed to be equal to icd->current_fmt->host_fmt->fourcc. Remove this parameter and update all drivers accordingly. Signed-off-by:
-
Hans de Goede authored
Before this patch the resulting values from a try_fmt were different then those from a s_fmt with the same parameters. try_fmt simply did not touch / fill some values like bytesperline at all. This patch also corrects bytesperline to the proper value for a planar format such as the YUV420P format the pwc driver produces, which is the bytesperline value for the biggest plane, rather then those of all planes added together. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Instead of making this a module parameter, automatically fallback to higher compression settings if there is not enough bandwidth. Signed-off-by:
-
Hans de Goede authored
The pwc driver claims to support any resolution between 160x120 and 640x480, but emulates this by simply drawing a black border around the image. Userspace can draw its own black border if it really wants one. Signed-off-by:
-
Hans de Goede authored
This stems from the v4l1 era, with v4l2 everything can be done with standardized v4l2 API calls. Signed-off-by:
-
