The basic stuff comes from the newer code from SysKonnect, but there
code had ugly way to find the PNMI instance. This driver seems full
of places where they do unnecessary board/port bookeeping (*sigh*)
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

The basic stuff comes from the newer code from SysKonnect, but I redid
it using a per board timer rather than a global timer.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

The basic stuff comes from the newer code from SysKonnect, but I redid
it using ethtool_ops and a cleaner way of doing the stats (from e100)
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Add netpoll console support

From: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Use new format module_param rather than now deprecated MODULE_PARM
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Use netdev_priv when dereferenceing net_device private
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

The /proc intereface can be cleaned up a lot:
+ Pass the device to through the proc data/seq_private hook.
+ No longer needs to have a list of network devices
+ use seq_printf directly rather than indirection into a buffer
+ failure to create proc directory or interface should not
  be fatal.
+ if PROC_FS not configured, let the stubs cause the necessary
  code elimination rather than using #ifdef
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

The table OnesHash is only used in this file, and should
be made a local constant.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Network driver's shouldn't be doing module reference counting
on 2.6.  This is a bad replication of 2.4 behaviour
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

I had another look at the ugly rivafb memory ordering requirements.

It seems P{V,C}IO areas are only accessed using VGA_{RD,WR}8 macros. 
NV_{RW,WR}08 are never actually used directly.  So this patch makes at
least usage consistent: VGA_{RD,WR}8 to access "I/O areas" in an ordered
way.  NV_* for the rest.
Signed-off-by: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Bingo...  edd_devices[] was too short.  When we keep more than 6
signatures, it overruns the end.  Also, I rewrote edd_num_devices to be
clearer about its goal. 

This patch is necessary even after the last edd.S patch was reverted.

Thanks to Christian Kujau for testing and narrowing it down enough to
debug this. 

It still doesn't explain why Christian's BIOS reports more devices than
he has, that's still up in the air, so don't re-apply the edd.S patch
just reverted. 
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Remove static flash device location definitions since they're now
obsolete.  Additionally, dynamically allocate driver private data
structures.

Use partitioning information passed in via the platform device
instead.  This means that individual machine files in
arch/arm/mach-sa1100 can contain their partitioning information.

- combine sa1100_locate_partitions with sa1100_mtd_probe.
- set device driver data in the probe method, and use this to get
  at our driver private information in the other methods.

This prepares the SA1100 flash driver to accept platform data via
the driver model.

This removes a bunch of SA1100 machine support files which have been
unable to be built for a while, due to missing out on updates.

Warning of removal had been posted to the ARM kernel mailing list,
and this cset represents those which did not attract any interest.

This adds platform_device-based partition and map information for
badge4, cerf, collie, h3600, hackkit and shannon SA1100 machine
types.

Patch from Ben Dooks

S3C2410/S3C2440 RTC driver using arch/arm/common/rtctime.c as
a base. Supports alarm, and periodic IRQ from 1 to 64Hz

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Dave Jiang

Remove nolonger used file from arch/arm/mach-iop3xx/mm-321.c

Signed-off-by: Dave Jiang
Signed-off-by: Russell King

into kroah.com:/home/greg/linux/BK/pci-2.6

into kroah.com:/home/greg/linux/BK/usb-2.6

This all because of stupid hardware implementations that can't decide
which endian form they want to run the chip in...
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Hanna Linder <hannal@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Hanna Linder <hannal@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

As pci_find_device is going away I've replaced it with pci_get_device.
Signed-off-by: Hanna Linder <hannal@us.ibm.com>

As pci_find_device is going away I've replaced it with pci_get_device
and pci_dev_put.
Signed-off-by: Hanna Linder <hannal@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

As pci_find_device is going away I've replaced it with pci_get_device
and pci_dev_put.
Signed-off-by: Hanna Linder <hannal@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>