- 15 Dec, 2009 40 commits
-
-
Andres Salomon authored
This is based on the old code on arch/x86/kernel/mfgpt_32.c, except it's not x86 specific, it's modular, and it makes use of a PCI BAR rather than a random MSR. Currently module unloading is not supported; it's uncertain whether or not it can be made work with the hardware. [akpm@linux-foundation.org: add X86 dependency] Signed-off-by:
Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
Previously, OLPC support for the mic extensions was only enabled in the ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set. This was because the old geode GPIO code was written in a manner that assumed CONFIG_MGEODE_LX. With the new cs553x-gpio driver, this is no longer the case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead include a requirement on GPIOLIB. We use the generic GPIO API rather than the cs553x-specific API. Signed-off-by:
-
Tobias Mueller authored
Changed number of gpio pins to 32 (according to datasheet) Added mask to disable some pins Added gpio_request for checking mask and disabling special pin functions Added pin names [dilinger@collabora.co.uk: make printk usage consistent] Signed-off-by:
Tobias Mueller <Tobias_Mueller@twam.info> Signed-off-by:
-
Andres Salomon authored
This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend (allowing GPIO users to use the generic GPIO API if desired) while also allowing architecture-specific users directly (via the cs5535_gpio_* functions). Tested on an OLPC machine. Some Leemotes also use CS5536 (with a mips cpu), which is why this is in drivers/gpio rather than arch/x86. Currently, it conflicts with older geode GPIO support; once MFGPT support is reworked to also be more generic, the older geode code will be removed. Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Use DECLARE_BITMAP(), find_first_zero_bit(), set_bit() and clear_bit() instead of rewriting code to do it with the minor number dynamic allocation bitmap. We need to invert the bit position to keep the code behaviour of using the last minor numbers first, since we don't have a find_last_zero_bit. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
If there's a failure creating the device (because there's already one with the same name, for example), the current implementation does not clear the bit for the allocated minor and that number is lost for future allocations. Second, the test currently in misc_deregister is broken, since it does not test for the 0 minor. Signed-off-by:
-
Phil Carmody authored
There are quite a few instances in the kernel of checks of pointers both against NULL and against the errno range, handling both cases identically. This additional helper function would simplify such code. [akpm@linux-foundation.org: build fix] Signed-off-by:
Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by:
-
Jean Delvare authored
Two IOC3 and IOC4 drivers have broken error paths on registration. Fix them. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Pat Gefre <pfg@sgi.com> Signed-off-by:
-
Jean Delvare authored
Several IOC3 and IOC4 drivers misuse the __devinit and __devexit section markers. Use __init and __exit instead as appropriate, then add __devinit and __devexit where they really belong for PCI drivers. Also make ioc4_serial_init static. Signed-off-by:
-
Hiroshi Shimamoto authored
journal_info in task_struct is used in journaling file system only. So introduce CONFIG_FS_JOURNAL_INFO and make it conditional. Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Alexey Dobriyan authored
It's easy to lose useful DEBUG_BUGVERBOSE by switching EMBEDDED left and right. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Joe Perches authored
Add a printk_ratelimited statement expression macro that uses a per-call ratelimit_state so that multiple subsystems output messages are not suppressed by a global __ratelimit state. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: s/_rl/_ratelimited/g] Signed-off-by:
Joe Perches <joe@perches.com> Cc: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Commit 8c870933 has removed the pmu_device_init call from misc_init, but unlike other similar commits, has not removed its declaration. Signed-off-by:
-
H Hartley Sweeten authored
do_each_thread/while_each_thread wrap a block of code that is in this format: for (...) do ... while If curly braces do not surround the inner loop the following warning is generated by sparse: warning: do-while statement is not a compound statement Fix the warning by adding the braces. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Amerigo Wang authored
According to feature-removal-schedule.txt, it is the time to remove print_fn_descriptor_symbol(). And a quick grep shows that it no longer has any callers. Signed-off-by:
WANG Cong <amwang@redhat.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Amerigo Wang authored
rwsem_is_locked() tests ->activity without locks, so we should always keep ->activity consistent. However, the code in __rwsem_do_wake() breaks this rule, it updates ->activity after _all_ readers waken up, this may give some reader a wrong ->activity value, thus cause rwsem_is_locked() behaves wrong. Quote from Andrew: " - we have one or more processes sleeping in down_read(), waiting for access. - we wake one or more processes up without altering ->activity - they start to run and they do rwsem_is_locked(). This incorrectly returns "false", because the waker process is still crunching away in __rwsem_do_wake(). - the waker now alters ->activity, but it was too late. " So we need get a spinlock to protect this. And rwsem_is_locked() should not block, thus we use spin_trylock_irqsave(). [akpm@linux-foundation.org: simplify code] Reported-by:
Brian Behlendorf <behlendorf1@llnl.gov> Cc: Ben Woodard <bwoodard@llnl.gov> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Amerigo Wang authored
These functions need not to be exported, since no drivers should use them. __init_rwsem() is an exception, because init_rwsem(), which is a macro, is used. Signed-off-by:
-
Joe Perches authored
Don't initialize __print_once. Invert the test to reduce initialized data. defconfig before: $size vmlinux text data bss dec hex filename 6976022 679572 1359668 9015262 898fde vmlinux defconfig after: $size vmlinux text data bss dec hex filename 6976006 679508 1359700 9015214 898fae vmlinux Signed-off-by:
-
H Hartley Sweeten authored
The symbol 'call' is a static symbol used for initcall_debug. This same symbol name is used locally by a couple functions and produces the following sparse warnings: warning: symbol 'call' shadows an earlier one Fix this noise by renaming the local symbols. Signed-off-by:
-
Daniel Mack authored
Signed-off-by:
Daniel Mack <daniel@caiaq.de> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Xiao Guangrong authored
Use smp_processor_id() instead of get_cpu() and put_cpu() in generic_smp_call_function_interrupt(), It's no need to disable preempt, because we must call generic_smp_call_function_interrupt() with interrupts disabled. Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Michael Hennerich authored
This driver supports the non-volatile digital potentiometers via I2C: AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, and AD5255 It provides a sysfs interface to each device for reading/writing which is documented in Documentation/misc-devices/ad525x_dpot.txt. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Chris Verges <chrisv@cyberswitching.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Joe Perches authored
If CONFIG_DYNAMIC_DEBUG is enabled and a source file has: #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> dynamic_debug.h will duplicate KBUILD_MODNAME in the output string. Remove the use of KBUILD_MODNAME from the output format string generated by dynamic_debug.h If CONFIG_DYNAMIC_DEBUG is not enabled, no compile-time check is done to printk/dev_printk arguments. Add it. Signed-off-by:
-
Cesar Eduardo Barros authored
Commit 70867453 ("printk_once(): use bool for boolean flag") changed printk_once() to use bool instead of int for its guard variable. Do the same change to WARN_ONCE() and WARN_ON_ONCE(), for the same reasons. This resulted in a reduction of 1462 bytes on a x86-64 defconfig: text data bss dec hex filename 8101271 1207116 992764 10301151 9d2edf vmlinux.before 8100553 1207148 991988 10299689 9d2929 vmlinux.after Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Cc: Roland Dreier <rolandd@cisco.com> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by:
-
Alexey Dobriyan authored
Convert code away from ->read_proc/->write_proc interfaces. Switch to proc_create()/proc_create_data() which make addition of proc entries reliable wrt NULL ->proc_fops, NULL ->data and so on. Problem with ->read_proc et al is described here commit 786d7e16 "Fix rmmod/read/write races in /proc entries" Signed-off-by:
-
Arjan van de Ven authored
gcc is not convinced that the floppy.c ioctl has sufficient bound checks: In function `copy_from_user', inlined from `fd_copyin' at drivers/block/floppy.c:3080, inlined from `fd_ioctl' at drivers/block/floppy.c:3503: arch/x86/include/asm/uaccess_32.h:211: warning: call to `copy_from_user_overflow' declared with attribute warning: copy_from_user buffer size is not provably correct And frankly, as a human I have a hard time proving the same more or less (the size comes from the ioctl argument. humpf. maybe. the code isn't very nice) This patch adds an explicit check to make 100% sure it's safe, better than finding out later that there indeed was a gap. [akpm@linux-foundation.org: add WARN_ON()] Signed-off-by:Arjan van de Ven <arjan@linux.intel.com> Acked-by:
-
Julia Lawall authored
It does not seem possible that ldev can be NULL, so drop the unnecessary test. If ldev can somehow be NULL, then the initialization of last_idx should be moved below the test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Convert code away from ->read_proc/->write_proc interfaces. Switch to proc_create()/proc_create_data() which make addition of proc entries reliable wrt NULL ->proc_fops, NULL ->data and so on. Problem with ->read_proc et al is described here commit 786d7e16 "Fix rmmod/read/write races in /proc entries" Signed-off-by:
-
john stultz authored
Setting a thread's comm to be something unique is a very useful ability and is helpful for debugging complicated threaded applications. However currently the only way to set a thread name is for the thread to name itself via the PR_SET_NAME prctl. However, there may be situations where it would be advantageous for a thread dispatcher to be naming the threads its managing, rather then having the threads self-describe themselves. This sort of behavior is available on other systems via the pthread_setname_np() interface. This patch exports a task's comm via proc/pid/comm and proc/pid/task/tid/comm interfaces, and allows thread siblings to write to these values. [akpm@linux-foundation.org: cleanups] Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Mike Fulton <fultonm@ca.ibm.com> Cc: Sean Foley <Sean_Foley@ca.ibm.com> Cc: Darren Hart <dvhltc@us.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Steven J. Magnani authored
On no-MMU systems, sizes reported in /proc/n/statm have units of bytes. Per Documentation/filesystems/proc.txt, these values should be in pages. Signed-off-by:
Steven J. Magnani <steve@digidescorp.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Jie Zhang authored
The NOMMU code currently clears all anonymous mmapped memory. While this is what we want in the default case, all memory allocation from userspace under NOMMU has to go through this interface, including malloc() which is allowed to return uninitialized memory. This can easily be a significant performance penalty. So for constrained embedded systems were security is irrelevant, allow people to avoid clearing memory unnecessarily. This also alters the ELF-FDPIC binfmt such that it obtains uninitialised memory for the brk and stack region. Signed-off-by:
Jie Zhang <jie.zhang@analog.com> Signed-off-by:
Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Greg Ungerer <gerg@snapgear.com> Signed-off-by:
-
Naoya Horiguchi authored
This patch enables extraction of the pfn of a hugepage from /proc/pid/pagemap in an architecture independent manner. Details ------- My test program (leak_pagemap) works as follows: - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,) - read()/write() something on it, - call page-types with option -p, - munmap() and unlink() the file on hugetlbfs Without my patches ------------------ $ ./leak_pagemap flags page-count MB symbolic-flags long-symbolic-flags 0x0000000000000000 1 0 __________________________________ 0x0000000000000804 1 0 __R________M______________________ referenced,mmap 0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap 0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked 0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked 0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked total 101 0 The output of page-types don't show any hugepage. With my patches --------------- $ ./leak_pagemap flags page-count MB symbolic-flags long-symbolic-flags 0x0000000000000000 1 0 __________________________________ 0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge 0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge 0x0000000000000804 1 0 __R________M______________________ referenced,mmap 0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap 0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap 0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked 0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked 0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked total 51300 200 The output of page-types shows 51200 pages contributing to hugepages, containing 100 head pages and 51100 tail pages as expected. [akpm@linux-foundation.org: build fix] Signed-off-by:Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Naoya Horiguchi authored
Most callers of pmd_none_or_clear_bad() check whether the target page is in a hugepage or not, but walk_page_range() do not check it. So if we read /proc/pid/pagemap for the hugepage on x86 machine, the hugepage memory is leaked as shown below. This patch fixes it. Details ======= My test program (leak_pagemap) works as follows: - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,) - read()/write() something on it, - call page-types with option -p (walk around the page tables), - munmap() and unlink() the file on hugetlbfs Without my patches ------------------ $ cat /proc/meminfo |grep "HugePage" HugePages_Total: 1000 HugePages_Free: 1000 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ./leak_pagemap [snip output] $ cat /proc/meminfo |grep "HugePage" HugePages_Total: 1000 HugePages_Free: 900 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ls /hugetlbfs/ $ 100 hugepages are accounted as used while there is no file on hugetlbfs. With my patches --------------- $ cat /proc/meminfo |grep "HugePage" HugePages_Total: 1000 HugePages_Free: 1000 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ./leak_pagemap [snip output] $ cat /proc/meminfo |grep "HugePage" HugePages_Total: 1000 HugePages_Free: 1000 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ls /hugetlbfs $ No memory leaks. Signed-off-by:
-
Naoya Horiguchi authored
Most callers of pmd_none_or_clear_bad() check whether the target page is in a hugepage or not, but mincore() and walk_page_range() do not check it. So if we use mincore() on a hugepage on x86 machine, the hugepage memory is leaked as shown below. This patch fixes it by extending mincore() system call to support hugepages. Details ======= My test program (leak_mincore) works as follows: - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,) - read()/write() something on it, - call mincore() for first ten pages and printf() the values of *vec - munmap() and unlink() the file on hugetlbfs Without my patch ---------------- $ cat /proc/meminfo| grep "HugePage" HugePages_Total: 1000 HugePages_Free: 1000 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ./leak_mincore vec[0] 0 vec[1] 0 vec[2] 0 vec[3] 0 vec[4] 0 vec[5] 0 vec[6] 0 vec[7] 0 vec[8] 0 vec[9] 0 $ cat /proc/meminfo |grep "HugePage" HugePages_Total: 1000 HugePages_Free: 999 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ls /hugetlbfs/ $ Return values in *vec from mincore() are set to 0, while the hugepage should be in memory, and 1 hugepage is still accounted as used while there is no file on hugetlbfs. With my patch ------------- $ cat /proc/meminfo| grep "HugePage" HugePages_Total: 1000 HugePages_Free: 1000 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ./leak_mincore vec[0] 1 vec[1] 1 vec[2] 1 vec[3] 1 vec[4] 1 vec[5] 1 vec[6] 1 vec[7] 1 vec[8] 1 vec[9] 1 $ cat /proc/meminfo |grep "HugePage" HugePages_Total: 1000 HugePages_Free: 1000 HugePages_Rsvd: 0 HugePages_Surp: 0 $ ls /hugetlbfs/ $ Return value in *vec set to 1 and no memory leaks. [akpm@linux-foundation.org: cleanup] [akpm@linux-foundation.org: build fix] Signed-off-by:
-
Mel Gorman authored
If a user asks for a hugepage pool resize but specified a large number, the machine can begin trashing. In response, they might hit ctrl-c but signals are ignored and the pool resize continues until it fails an allocation. This can take a considerable amount of time so this patch aborts a pool resize if a signal is pending. Suggested by Dave Hansen. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by:
-
Lee Schermerhorn authored
Cleanup stale comments on munlock_vma_page(). Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Lee Schermerhorn authored
unevictable_migrate_page() in mm/internal.h is a relic of the since removed UNEVICTABLE_LRU Kconfig option. This patch removes the function and open codes the test in migrate_page_copy(). Signed-off-by:
Christoph Lameter <cl@linux-foundation.org> Acked-by:
-
Mel Gorman authored
When the owner of a mapping fails COW because a child process is holding a reference, the children VMAs are walked and the page is unmapped. The i_mmap_lock is taken for the unmapping of the page but not the walking of the prio_tree. In theory, that tree could be changing if the lock is not held. This patch takes the i_mmap_lock properly for the duration of the prio_tree walk. [hugh.dickins@tiscali.co.uk: Spotted the problem in the first place] Signed-off-by:
-
Amerigo Wang authored
Jan Engelhardt reported we have this problem: setting max_map_count to a value large enough results in programs dying at first try. This is on 2.6.31.6: 15:59 borg:/proc/sys/vm # echo $[1<<31-1] >max_map_count 15:59 borg:/proc/sys/vm # cat max_map_count 1073741824 15:59 borg:/proc/sys/vm # echo $[1<<31] >max_map_count 15:59 borg:/proc/sys/vm # cat max_map_count Killed This is because we have a chance to make 'max_map_count' negative. but it's meaningless. Make it only accept non-negative values. Reported-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
