- 11 May, 2010 40 commits
-
-
Charles Clément authored
Signed-off-by:
Charles Clément <caratorn@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Charles Clément authored
Signed-off-by:
-
Greg Kroah-Hartman authored
This actually gets the adis16255 driver to build properly. Cc: Matthias Brugger <mensch0815@googlemail.com> Signed-off-by: -
Charles Clément authored
Signed-off-by:
-
Matthias Brugger authored
This patch adds the adis16255 driver to the build system under the staging directory. It solves also most issues mentioned in TODO list: - sample rate exported to sysfs - spi_adis16255_bringup and spi_adis16255_shutdown encapsulated - chip selftest in spi_adis16255_bringup - kernel messages reduced to a reasonable number I removed the TODO file, because ther was only the reset of the gyroscope left. This is IMOH not necessary for the actual driver. There are also some typos in adis.c file. This patch should get rid of them as well. Signed-off-by:
Matthias Brugger <mensch0815@gmail.com> Signed-off-by:
-
Barry Song authored
Signed-off-by:
Barry Song <Barry.Song@analog.com> Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Barry Song authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Christos Tzoumakis authored
Signed-off-by:
Christos Tzoumakis <ctzocy@gmail.com> Signed-off-by:
-
Marin Mitov authored
dt3155v4l driver, as in -rc6-next-20100506 compiles, but will not run properly due to recent changes in the videobuf APIs. This patch synchronizes some functions that have been copied from drivers/media/video/videobuf-dma-contig.c (and modified) with the recent (-rc6 -> -rc6-next-) changes in videobuf layer especially drivers/media/video/videobuf-dma-contig.c Signed-off-by:
Marin Mitov <mitov@issp.bas.bg> Signed-off-by:
-
Andres More authored
Checkpatch warnings about using externs in .c files were not resolved, neither some long lines on deeply nested code. Signed-off-by:
Andres More <more.andres@gmail.com> Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Randy Dunlap authored
Fix build errors. st_kim.c uses rfkill*() interfaces, so it should depend on RFKILL. st_kim.c:(.text+0x291b21): undefined reference to `rfkill_unregister' st_kim.c:(.text+0x291b31): undefined reference to `rfkill_destroy' st_kim.c:(.text+0x291d8a): undefined reference to `rfkill_alloc' st_kim.c:(.text+0x291db9): undefined reference to `rfkill_init_sw_state' st_kim.c:(.text+0x291dc9): undefined reference to `rfkill_register' st_kim.c:(.text+0x291e07): undefined reference to `rfkill_unregister' (.text+0x291e85): undefined reference to `rfkill_set_hw_state' (.text+0x292072): undefined reference to `rfkill_set_hw_state' (.text+0x2920e1): undefined reference to `rfkill_set_hw_state Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Fix build errors by including linux/semaphore.h: drivers/staging/cxt1e1/pmcc4_private.h:144: error: field 'sr_sem_busy' has incomplete type drivers/staging/cxt1e1/pmcc4_private.h:146: error: field 'sr_sem_wait' has incomplete type drivers/staging/cxt1e1/pmcc4_private.h:189: error: field 'sem_wdbusy' has incomplete type drivers/staging/cxt1e1/musycc.c:617: error: implicit declaration of function 'down' drivers/staging/cxt1e1/musycc.c:641: error: implicit declaration of function 'up' Signed-off-by:
-
Andrew Lunn authored
Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Sven Eckelmann authored
Documentation/CodingStyle sets a strongly prefered limit of 80 characters per line in "Chapter 2: Breaking long lines and strings". Strings must be broken into smaller parts and long statements must be rewritten. Reported-by:
Mikal Sande <mikal.sande@gmail.com> Reported-by:
Mark Rankilor <reodge@gmail.com> Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
-
Sven Eckelmann authored
Trailing spaces at the end of a line or before a tab are against Documentation/CodingStyle "3.1: Spaces" and should be avoided. It is also common style to add a single space after commas unless it is followed either by a newline or a tab. Reported-by:
Luis de Bethencourt <luisbg@ubuntu.com> Signed-off-by:
-
Andrew Lunn authored
Not much left to do on the TODO list :-) Signed-off-by:
-
Sven Eckelmann authored
We must ensure that all pointer to a socket buffer are updated when we copy a socket buffer and free our reference to the old one. Another part of the kernel could also free its reference which maybe removes the buffer completely. In that situation we would would feed wrong information to the routing algorithm after the memory area is written again by someone else. Signed-off-by:
-
Simon Wunderlich authored
As we always return that the we consumed the skb, we should also free the skb in the case of an error. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
Simon Wunderlich authored
This patch limits the queue lengths of batman and broadcast packets. BATMAN packets are held back for aggregation and jittered to avoid interferences. Broadcast packets are stored to be sent out multiple times to increase the probability to be received by other nodes in lossy environments. Especially in extreme cases like broadcast storms, the queues have been seen to run full, eating up all the memory and triggering the infamous OOM killer. With the queue length limits introduced in this patch, this problem is avoided. Each queue is limited to 256 entries for now, resulting in 1 MB of maximum space available in total for typical setups (assuming one packet including overhead does not require more than 2000 byte). This should also be reasonable for smaller routers, otherwise the defines can be tweaked later. This third version of the patch does not increase the local broadcast sequence number when the queue is already full. Signed-off-by:
-
Simon Wunderlich authored
BATMAN and broadcast packets are tracked with a sequence number window of currently 64 entries to measure and avoid duplicates. Packets which have a sequence number smaller than the newest received packet minus 64 are not within this sequence number window anymore and are called "old packets" from now on. When old packets are received, the routing code assumes that the host of the originator has been restarted. This assumption however might be wrong as packets can also be delayed by NIC drivers, e.g. because of long queues or collision detection in dense WiFi? environments. This behaviour can be reproduced by doing a broadcast ping flood in a dense node environment. The effect is that the sequence number window is jumping forth and back, accepting and forwarding any packet (because packets are assumed to be "new") and causing loops. To overcome this problem, the sequence number handling has been reorganized. When an old packet is received, the window is reset back only once. Other old packets are dropped for (currently) 30 seconds to "protect" the new sequence number and avoid the hopping as described above. The reorganization brings some code cleanups (at least i hope you feel the same) and also fixes a bug in count_real_packets() which falsely updated the last_real_seqno for slightly older packets within the seqno window if they are no duplicates. This second version of the patch also fixes a problem where for seq_diff==64 bit_shift() reads from outside of the seqno window, and removes the loop for seq_diff == -64 which was present in the first patch. The third iteration also adds a window for the next expected sequence numbers. This minimizes sequence number flapping for packets with very big differences (e.g. 3 packets with seqno 0, 25000 and 50000 might still cause problems without this window). Signed-off-by:
-
Sven Eckelmann authored
This patch fixes unnecessary whitespaces before a quoted newline that the remaining batman-adv files had. Reported-by:
-
Marek Lindner authored
Instead of having a single /proc file "interfaces" in which you have to echo the wanted interface batman-adv will create a subfolder in each suitable /sys/class/net folder. This subfolder contains files for the interface specific settings. For example, mesh_iface to add/remove an interface from a virtual mesh network (at the moment only bat0 is supported). Example: echo bat0 > /sys/class/net/eth0/batman-adv/mesh_iface to deactivate: echo none > /sys/class/net/eth0/batman-adv/mesh_iface Interfaces which are not compatible with batman-adv won't contain the batman-adv folder, therefore can't be activated. Not supported are: loopback, non-ethernet, non-ARP and virtual mesh network interfaces Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
converted files: vis_mode, vis_data Signed-off-by:
-
Marek Lindner authored
This is the first patch in a series of patches which aim to convert all batman-adv /proc files to sysfs. To keep the changes in a digestable size it has been split up into smaller chunks. During the transition period batman-adv will use /proc as well as sysfs. As a first step the following files have been converted: aggregate_ogm, originators, transtable_global, transtable_local Signed-off-by:
-
Luis de Bethencourt authored
This patch fixes the 31 unnecessary whitespaces before a quoted newline that the batman-adv files had. Signed-off-by:
-
Dan Carpenter authored
The code here is testing to see if "i" is passed the end of the array. The original code works probably, but it's not the cleanest way. Andrew Lunn suggested that I also remove all the hard coded references to 256 so I have done that as well. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Simon Wunderlich authored
Signed-off-by:
-
Linus Lüssing authored
We are now having a newer, more neutral vis output so that we won't have to change the kernelmodule for adding support of new vis output formats. This patch adds an explanation about this in the README file of batman-adv and removes the description about the dot/json format (they will be added to the README of batctl). Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Simon Wunderlich authored
Signed-off-by:
-
Linus Lüssing authored
Max address is not being used anywhere and just misleading, therefore removing it. VIS_FORMAT string is now obsolete, so also remove it. Signed-off-by:
-
