- 07 Mar, 2007 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: release irq during suspend sdhci: make isr tolerant of read errors mmc: require explicit support for high-speed ncpfs: make sure server connection survives a kill
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: sis900 warning fixes mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data pcnet32: Fix PCnet32 performance bug on non-coherent architecutres __devinit & __devexit cleanups for de2104x driver 3c59x: Handle pci_enable_device() failure while resuming dmfe: Fix link detection dmfe: fix two bugs dmfe: trivial/spelling fixes revert "drivers/net/tulip/dmfe: support basic carrier detection" ucc_geth: returns NETDEV_TX_BUSY when BD ring is full ucc_geth: Fix BD processing natsemi: netpoll fixes bonding: Improve IGMP join processing bonding: only receive ARPs for us bonding: fix double dev_add_pack
-
- 06 Mar, 2007 38 commits
-
-
Rafael J. Wysocki authored
Update the outdated and inaccurate description of the software suspend in Kconfig. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Banks authored
Provide a module param "pool_mode" for sunrpc.ko which allows a sysadmin to choose the mode for mapping NFS thread service pools to CPUs. Values are: auto choose a mapping mode heuristically global (default, same as the pre-2.6.19 code) a single global pool percpu one pool per CPU pernode one pool per NUMA node Note that since 2.6.19 the hardcoded behaviour has been "auto", this patch makes the default "global". The pool mode can be changed after boot/modprobe using /sys, if the NFS and lockd services have been shut down. A useful side effect of this change is to fix a small memory leak when unloading the module. Signed-off-by:
Greg Banks <gnb@melbourne.sgi.com> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
When the last thread of nfsd exits, it shuts down all related sockets. It currently uses svc_close_socket to do this, but that only is immediately effective if the socket is not SK_BUSY. If the socket is busy - i.e. if a request has arrived that has not yet been processes - svc_close_socket is not effective and the shutdown process spins. So create a new svc_force_close_socket which removes the SK_BUSY flag is set and then calls svc_close_socket. Also change some open-codes loops in svc_destroy to use list_for_each_entry_safe. Signed-off-by:
-
NeilBrown authored
They don't really save that much, and aren't worth the hassle. Signed-off-by:
-
NeilBrown authored
The sunrpc server code needs to know the source and destination address for UDP packets so it can reply properly. It currently copies code out of the network stack to pick the pieces out of the skb. This is ugly and causes compile problems with the IPv6 stuff. So, rip that out and use recv_msg instead. This is a much cleaner interface, but has a slight cost in that the checksum is now checked before the copy, so we don't benefit from doing both at the same time. This can probably be fixed. Signed-off-by:
-
Jeff Dike authored
Comment the fact that sig_info is initialized early in boot, and thus doesn't need any locking. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
Add a debugging message in the case that mapping a stub fails. Signed-off-by:
-
Jeff Dike authored
Fix a few formatting bugs in the signal code. Signed-off-by:
-
Jeff Dike authored
Include linux/types.h here because we need a definition of __u32. This file appears not be exported verbatim by libc, so I think this doesn't have any userspace consequences. Signed-off-by:
-
Dimitri Gorokhovik authored
initramfs ended up depending on BLOCK: INITRAMFS_SOURCE <-- BLK_DEV_INITRD <-- BLOCK This inhibits use of customized-initramfs-over-ramfs without block layer (ramfs would still be enabled), useful in embedded applications. Move BLK_DEV_INITRD out of 'drivers/block/Kconfig' and into 'init/Kconfig', make it unconditional. Signed-off-by:
Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Mike Miller (OS Dev) authored
This patch adds support for the struct pci_driver shutdown method to cciss. We require notification of an impending reboot or shutdown so that we can flush the battery backed write cache (BBWC) on the Smart Array controller. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Mike Miller (OS Dev) authored
This patch changes the way we determine if a logical volume is larger than 2TB. The original test looked for a total_size of 0. Originally we added 1 to the total_size. That would make our read_capacity return size 0 for >2TB lv's. We assumed that we could not have a lv size of 0 so it seemed OK until we were in a clustered system. The backup node would see a size of 0 due to the reservation on the drive. That caused the driver to switch to 16-byte CDB's which are not supported on older controllers. After that everything was broken. It may seem petty but I don't see the value in trying to determine if the LBA is beyond the 2TB boundary. That's why when we switch we use 16-byte CDB's for all read/write operations. Please consider this for inclusion. Signed-off-by:
-
Josh Triplett authored
rcutorture's module parameters currently use permissions of 0, so they don't show up in /sys/module/rcutorture/parameters. Change the permissions on all module parameters to world-readable (0444). rcutorture does all of its initialization and thread startup when loaded and relies on the parameters not changing during execution, so they should not permit writing. However, reading seems fine. Signed-off-by:
Josh Triplett <josh@freedesktop.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Dave Kleikamp authored
This fixes a regression caused by 22c8ca78. nobh_prepare_write() no longer marks the page uptodate, so nobh_truncate_page() needs to do it. Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Daniel Walker authored
I've only seen this on x86_64. The vsyscall state only gets updated when a timer interrupts comes in. So if the time is set long before the next timer, there will be a period when a gettimeofday() won't reflect the correct time. I added an explicit update_vsyscall() during the settimeofday(), that way the vsyscall state doesn't get stale. Signed-off-by:
Daniel Walker <dwalker@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=8130Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Adrian Bunk authored
Remove the no longer used custom_sched_clock. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Thomas Gleixner authored
The TIMER_SOFTIRQ runs the hrtimers during bootup until a usable clocksource and clock event sources are registered. The switch to high resolution mode happens inside of the TIMER_SOFTIRQ, but runs the softirq afterwards. That way the tick emulation timer, which was set up in the switch to highres might be executed in the softirq context, which is a BUG. The rbtree has not to be touched by the softirq after the highres switch. This BUG was observed by Andres Salomon, who provided the information to debug it. Return early from the softirq, when the switch was sucessful. [dilinger@debian.org: add debug warning] [akpm@linux-foundation.org: make debug warning compile] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andres Salomon <dilinger@debian.org> Acked-by:
Andres Salomon <dilinger@debian.org> Acked-by:
-
Andres Salomon authored
The description for the hrtimer_clock_base struct describes "hrtimer_base". That should be hrtimer_clock_base. Signed-off-by:
-
Andres Salomon authored
The description for HRTIMER_CB_IRQSAFE_NO_SOFTIRQ is backwards; "NO SOFTIRQ" sounds a whole lot like it means it must not be run in a softirq. Signed-off-by:
-
Andres Salomon authored
Prior to commit 95492e46 ([PATCH] x86: rewrite SMP TSC sync code), the headers in asm-i386 did not really require anything in include/asm-x86_64. This means that distributions such as fedora did not include asm-x86_64 in kernel-devel headers for i386. Ingo's commit changed that, and broke things. This is easy enough to hack around in package builds by just including asm-x86_64 on i386, but that's kind of annoying. If anything, x86_64 should depend upon i386, not the other way around. This patch changes it so that asm-x86_64/tsc.h includes asm-i386/tsc.h, rather than vice-versa. Signed-off-by:
-
Thomas Gleixner authored
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by:
-
Mark Lord authored
Any attempt to open/use a bluetooth rfcomm device locks up scheduling completely on my machine. Interrupts (ping, alt-sysrq) seem to be alive, but nothing else. This was working fine in 2.6.20, broken now in 2.6.21-rc2-git* Reverting this change (below) fixes it: | author Marcel Holtmann <marcel@holtmann.org> | Sat, 17 Feb 2007 22:58:57 +0000 (23:58 +0100) | committer David S. Miller <davem@sunset.davemloft.net> | Mon, 26 Feb 2007 19:42:41 +0000 (11:42 -0800) | commit c1a33136 | tree 337a876f727061362b6a169f8759849c105b8f7a tree | snapshot | parent f5ffd462 commit | diff | | [Bluetooth] Make use of device_move() for RFCOMM TTY devices | | In the case of bound RFCOMM TTY devices the parent is not available | before its usage. So when opening a RFCOMM TTY device, move it to | the corresponding ACL device as a child. When closing the device, | move it back to the virtual device tree. | Signed-off-by: Marcel Holtmann <marcel@holtmann.org> The simplest fix for this bug is to prevent sysfs_move_dir() from self-deadlocking when (old_parent == new_parent). This patch prevents total system lockup when using rfcomm devices. Signed-off-by:
Mark Lord <mlord@pobox.com> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
James Simmons authored
Fix the following error if FB_DDC=n Kernel: arch/x86_64/boot/bzImage is ready (#1) Building modules, stage 2. MODPOST 229 modules WARNING: "fb_ddc_read" [drivers/video/nvidia/nvidiafb.ko] undefined! make[1]: *** [__modpost] Error 1 Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Fix implicit declarations and missing code in atyfb. drivers/video/aty/atyfb_base.c:2137: warning: implicit declaration of function 'a ty_ld_lcd' drivers/video/aty/atyfb_base.c:2154: warning: implicit declaration of function 'a ty_st_lcd' atyfb_base.c:(.text+0x33e5c): undefined reference to `aty_ld_lcd' atyfb_base.c:(.text+0x33eb2): undefined reference to `aty_st_lcd' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Dave Jones authored
drivers/video/nvidia/nv_backlight.c: In function 'nvidia_bl_init': drivers/video/nvidia/nv_backlight.c:103: error: implicit declaration of function 'pmac_has_backlight_type' Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Andrew Morton authored
arch/i386/kernel/vmi.c: In function 'vmi_safe_halt': arch/i386/kernel/vmi.c:262: warning: implicit declaration of function 'vmi_stop_hz_timer' arch/i386/kernel/vmi.c:266: warning: implicit declaration of function 'vmi_account_time_restart_hz_timer' Acked-by:
-
Thomas Gleixner authored
The programming of periodic tick devices needs to be saved/restored across suspend/resume - otherwise we might end up with a system coming up that relies on getting a PIT (or HPET) interrupt, while those devices default to 'no interrupts' after powerup. (To confuse things it worked to a certain degree on some systems because the lapic gets initialized as a side-effect of SMP bootup.) This suspend / resume thing was dropped unintentionally during the last-minute -mm code reshuffling. Signed-off-by:
-
Pierre Ossman authored
Release the device's irq during sleep, as all well-behaved drivers should. Signed-off-by:Pierre Ossman <drzeus@drzeus.cx>
-
Mark Lord authored
The interrupt is shared with another device, which resumes earlier than the sdhci controller, and generates an interrupt. The sdhci interrupt handler runs, sees 0xffffffff in its own device's interrupt status, and tries to handle it.. The reason for the 0xffffffff is that the device is still suspended, and *all* regs are reading back 0xffffffff. Signed-off-by:
-
Pierre Ossman authored
The new high-speed timings are similar to each other and the old system, but not identical. And although things "just work" most of the time, sometimes it does not. So we need to start marking which hosts are known to fully comply with the new timings. Signed-off-by: -
Pierre Ossman authored
Use internal buffers instead of the ones supplied by the caller so that a caller can be interrupted without having to abort the entire ncp connection. Signed-off-by:
Pierre Ossman <ossman@cendio.se> Acked-by:
Petr Vandrovec <petr@vandrovec.name>
-
Andrew Morton authored
drivers/net/sis900.c: In function 'sis900_reset_phy': drivers/net/sis900.c:972: warning: 'status' may be used uninitialized in this function drivers/net/sis900.c: In function 'sis900_check_mode': drivers/net/sis900.c:1431: warning: 'status' may be used uninitialized in this function drivers/net/sis900.c: In function 'sis900_timer': drivers/net/sis900.c:1467: warning: 'status' may be used uninitialized in this function Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Dale Farnsworth authored
We were using the platform_device.id field to identify which ethernet port is used for mv643xx_eth device. This is not generally correct. It will be incorrect, for example, if a hardware platform uses a single port but not the first port. Here, we add an explicit port_number field to struct mv643xx_eth_platform_data. This makes the mv643xx_eth_platform_data structure required, but that isn't an issue since all users currently provide it already. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Signed-off-by:
-
Don Fry authored
The PCnet32 driver always passed the the size of the largest possible packet to the pci_dma_sync_single_for_cpu and pci_dma_sync_single_for_device. This results in a fairly large "colateral damage" in the caches and makes the flush operation itself much slower. On a system with a 40MHz CPU this patch increases network bandwidth by about 12%. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Acked-by:
Don Fry <pcnet32@verizon.net> Signed-off-by:
-
Prarit Bhargava authored
Fixes MODPOST warnings similar to: WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to .init.text:de_init_one from .data.rel.local after 'de_driver' (at offset 0x20) WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to .exit.text:de_remove_one from .data.rel.local after 'de_driver' (at offset 0x28) Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Valerie Henson <val_henson@linux.intel.com> Signed-off-by:
-
Dmitriy Monakhov authored
Handle pci_enable_device() failure while resuming, we can safely exit here. Signed-off-by:
Monakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by:
-
