- 10 May, 2016 9 commits
-
-
Huacai Chen authored
[ Upstream commit 221004c6 ] Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: stable@vger.kernel.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Jérôme Glisse authored
[ Upstream commit b5dcec69 ] Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 67f3754b ] The commit [9bef72bd: ALSA: pcxhr: Use nonatomic PCM ops] converted to non-atomic PCM ops, but shamelessly with an unbalanced mutex locking, which leads to the hangup easily. Fix it. Fixes: 9bef72bd ('ALSA: pcxhr: Use nonatomic PCM ops') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116441 Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 89e9e66b ] If userspace calls UNLOCK_PI unconditionally without trying the TID -> 0 transition in user space first then the user space value might not have the waiters bit set. This opens the following race: CPU0 CPU1 uval = get_user(futex) lock(hb) lock(hb) futex |= FUTEX_WAITERS .... unlock(hb) cmpxchg(futex, uval, newval) So the cmpxchg fails and returns -EINVAL to user space, which is wrong because the futex value is valid. To handle this (yes, yet another) corner case gracefully, check for a flag change and retry. [ tglx: Massaged changelog and slightly reworked implementation ] Fixes: ccf9e6a8 ("futex: Make unlock_pi more robust") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1460723739-5195-1-git-send-email-bigeasy@linutronix.deSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit bfaddd9f ] This reverts commit e64c952e. ATPX is the ACPI method for controlling AMD PowerXpress laptops. There are flags to indicate which methods are supported. If the dGPU power down flag is not supported, the driver needs to implement the dGPU power down manually. We had previously always forced the driver to assume the ATPX dGPU power down was present, but this causes problems on boards where it is not, leading to GPU hangs when attempting to power down the dGPU. Manual dGPU power down is not currently supported in the Linux driver. Some laptops indicate that the ATPX dGPU power down method is not present, but it actually apparently is. I'm not sure if this is a bios bug and it should be set or if there is a reason it was unset and the method should not be used. This is not an issue on other OSes since both the ATPX and the manual driver power down methods are supported. This is apparently fairly widespread, so just revert for now. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=115321 https://bugzilla.kernel.org/show_bug.cgi?id=116581 https://bugzilla.kernel.org/show_bug.cgi?id=116251 Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
[ Upstream commit bcb31eba ] bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
-
Alex Deucher authored
[ Upstream commit a64663d9 ] bug: https://bugzilla.kernel.org/show_bug.cgi?id=115291Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 2b02ec79 ] Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92260Signed-off-by:
-
Maxim Sheviakov authored
[ Upstream commit e7865479 ] Just adds the quirk for MSI R7 370 Armor 2X Bug: https://bugs.freedesktop.org/show_bug.cgi?id=91294Signed-off-by:
Maxim Sheviakov <mrader3940@yandex.ru> Signed-off-by:
-
- 09 May, 2016 6 commits
-
-
Anton Blanchard authored
[ Upstream commit beff8237 ] scan_features() updates cpu_user_features but not cpu_user_features2. Amongst other things, cpu_user_features2 contains the user TM feature bits which we must keep in sync with the kernel TM feature bit. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Anton Blanchard authored
[ Upstream commit 6997e57d ] The REAL_LE feature entry in the ibm_pa_feature struct is missing an MMU feature value, meaning all the remaining elements initialise the wrong values. This means instead of checking for byte 5, bit 0, we check for byte 0, bit 0, and then we incorrectly set the CPU feature bit as well as MMU feature bit 1 and CPU user feature bits 0 and 2 (5). Checking byte 0 bit 0 (IBM numbering), means we're looking at the "Memory Management Unit (MMU)" feature - ie. does the CPU have an MMU. In practice that bit is set on all platforms which have the property. This means we set CPU_FTR_REAL_LE always. In practice that seems not to matter because all the modern cpus which have this property also implement REAL_LE, and we've never needed to disable it. We're also incorrectly setting MMU feature bit 1, which is: #define MMU_FTR_TYPE_8xx 0x00000002 Luckily the only place that looks for MMU_FTR_TYPE_8xx is in Book3E code, which can't run on the same cpus as scan_features(). So this also doesn't matter in practice. Finally in the CPU user feature mask, we're setting bits 0 and 2. Bit 2 is not currently used, and bit 0 is: #define PPC_FEATURE_PPC_LE 0x00000001 Which says the CPU supports the old style "PPC Little Endian" mode. Again this should be harmless in practice as no 64-bit CPUs implement that mode. Fix the code by adding the missing initialisation of the MMU feature. Also add a comment marking CPU user feature bit 2 (0x4) as reserved. It would be unsafe to start using it as old kernels incorrectly set it. Fixes: 44ae3ab3 ("powerpc: Free up some CPU feature bits by moving out MMU-related features") Signed-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 9e819963 ] Firmware is allowed to communicate to us via the "ibm,pa-features" property that TM (Transactional Memory) support is disabled. Currently this doesn't happen on any platform we're aware of, but we should honor it anyway. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit f709b45e ] Prevent information from leaking to userspace by doing a memset to 0 of the export state structure before setting the structure values and copying it. This prevents un-initialized padding areas from being copied into the export area. Cc: <stable@vger.kernel.org> # 3.14.x- Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Xiaodong Liu authored
[ Upstream commit 0851561d ] In sha_complete_job, incorrect mcryptd_hash_request_ctx pointer is used when check and complete other jobs. If the memory of first completed req is freed, while still completing other jobs in the func, kernel will crash since NULL pointer is assigned to RIP. Cc: <stable@vger.kernel.org> Signed-off-by:
Xiaodong Liu <xiaodong.liu@intel.com> Acked-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Dmitry Ivanov authored
[ Upstream commit 8f815cdd ] A non-privileged user can create a netlink socket with the same port_id as used by an existing open nl80211 netlink socket (e.g. as used by a hostapd process) with a different protocol number. Closing this socket will then lead to the notification going to nl80211's socket release notification handler, and possibly cause an action such as removing a virtual interface. Fix this issue by checking that the netlink protocol is NETLINK_GENERIC. Since generic netlink has no notifier chain of its own, we can't fix the problem more generically. Fixes: 026331c4 ("cfg80211/mac80211: allow registering for and sending action frames") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Ivanov <dima@ubnt.com> [rewrite commit message] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
- 08 May, 2016 1 commit
-
-
Vladis Dronov authored
[ Upstream commit 162f98de ] The gtco driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. Also let's fix a minor coding style issue. The full correct report of this issue can be found in the public Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283385Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
- 23 Apr, 2016 4 commits
-
-
Sasha Levin authored
Signed-off-by: -
Eric Dumazet authored
[ Upstream commit c2e7204d ] Tracking idle time in bictcp_cwnd_event() is imprecise, as epoch_start is normally set at ACK processing time, not at send time. Doing a proper fix would need to add an additional state variable, and does not seem worth the trouble, given CUBIC bug has been there forever before Jana noticed it. Let's simply not set epoch_start in the future, otherwise bictcp_update() could overflow and CUBIC would again grow cwnd too fast. This was detected thanks to a packetdrill test Neal wrote that was flaky before applying this fix. Fixes: 30927520 ("tcp_cubic: better follow cubic curve after idle period") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Cc: Jana Iyengar <jri@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit d3efe084 ] When we call btrfs_commit_transaction(), we splice the list "ordered" of our transaction handle into the transaction's "pending_ordered" list, but we don't re-initialize the "ordered" list of our transaction handle, this means it still points to the same elements it used to before the splice. Then we check if the current transaction's state is >= TRANS_STATE_COMMIT_START and if it is we end up calling btrfs_end_transaction() which simply splices again the "ordered" list of our handle into the transaction's "pending_ordered" list, leaving multiple pointers to the same ordered extents which results in list corruption when we are iterating, removing and freeing ordered extents at btrfs_wait_pending_ordered(), resulting in access to dangling pointers / use-after-free issues. Similarly, btrfs_end_transaction() can end up in some cases calling btrfs_commit_transaction(), and both did a list splice of the transaction handle's "ordered" list into the transaction's "pending_ordered" without re-initializing the handle's "ordered" list, resulting in exactly the same problem. This produces the following warning on a kernel with linked list debugging enabled: [109749.265416] ------------[ cut here ]------------ [109749.266410] WARNING: CPU: 7 PID: 324 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() [109749.267969] list_del corruption. prev->next should be ffff8800ba087e20, but was fffffff8c1f7c35d (...) [109749.287505] Call Trace: [109749.288135] [<ffffffff8145f077>] dump_stack+0x4f/0x7b [109749.298080] [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2 [109749.331605] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb [109749.334849] [<ffffffff81260642>] ? __list_del_entry+0x5a/0x98 [109749.337093] [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48 [109749.337847] [<ffffffff81260642>] __list_del_entry+0x5a/0x98 [109749.338678] [<ffffffffa053e8bf>] btrfs_wait_pending_ordered+0x46/0xdb [btrfs] [109749.340145] [<ffffffffa058a65f>] ? __btrfs_run_delayed_items+0x149/0x163 [btrfs] [109749.348313] [<ffffffffa054077d>] btrfs_commit_transaction+0x36b/0xa10 [btrfs] [109749.349745] [<ffffffff81087310>] ? trace_hardirqs_on+0xd/0xf [109749.350819] [<ffffffffa055370d>] btrfs_sync_file+0x36f/0x3fc [btrfs] [109749.351976] [<ffffffff8118ec98>] vfs_fsync_range+0x8f/0x9e [109749.360341] [<ffffffff8118ecc3>] vfs_fsync+0x1c/0x1e [109749.368828] [<ffffffff8118ee1d>] do_fsync+0x34/0x4e [109749.369790] [<ffffffff8118f045>] SyS_fsync+0x10/0x14 [109749.370925] [<ffffffff81465197>] system_call_fastpath+0x12/0x6f [109749.382274] ---[ end trace 48e0d07f7c03d95a ]--- On a non-debug kernel this leads to invalid memory accesses, causing a crash. Fix this by using list_splice_init() instead of list_splice() in btrfs_commit_transaction() and btrfs_end_transaction(). Cc: stable@vger.kernel.org Fixes: 50d9aa99 ("Btrfs: make sure logged extents complete in the current transaction V3" Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Mike Galbraith authored
Backport of 81ad4276 failed to adjust for intervening ->get_trip_temp() argument type change, thus causing stack protector to panic. drivers/thermal/thermal_core.c: In function ‘thermal_zone_device_register’: drivers/thermal/thermal_core.c:1569:41: warning: passing argument 3 of ‘tz->ops->get_trip_temp’ from incompatible pointer type [-Wincompatible-pointer-types] if (tz->ops->get_trip_temp(tz, count, &trip_temp)) ^ drivers/thermal/thermal_core.c:1569:41: note: expected ‘long unsigned int *’ but argument is of type ‘int *’ CC: <stable@vger.kernel.org> #3.18,#4.1 Signed-off-by:
Mike Galbraith <umgwanakikbuti@gmail.com>
-
- 21 Apr, 2016 1 commit
-
-
Bin Liu authored
[ Upstream commit 0149b07a ] The macro EP_MODE_AUTOREG_* should be called EP_MODE_AUTOREQ_*, as they are used for register AUTOREQ. Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
- 20 Apr, 2016 19 commits
-
-
Eric Dumazet authored
[ Upstream commit 30927520 ] Jana Iyengar found an interesting issue on CUBIC : The epoch is only updated/reset initially and when experiencing losses. The delta "t" of now - epoch_start can be arbitrary large after app idle as well as the bic_target. Consequentially the slope (inverse of ca->cnt) would be really large, and eventually ca->cnt would be lower-bounded in the end to 2 to have delayed-ACK slow-start behavior. This particularly shows up when slow_start_after_idle is disabled as a dangerous cwnd inflation (1.5 x RTT) after few seconds of idle time. Jana initial fix was to reset epoch_start if app limited, but Neal pointed out it would ask the CUBIC algorithm to recalculate the curve so that we again start growing steeply upward from where cwnd is now (as CUBIC does just after a loss). Ideally we'd want the cwnd growth curve to be the same shape, just shifted later in time by the amount of the idle period. Reported-by:
Jana Iyengar <jri@google.com> Signed-off-by:
-
Robert Dobrowolski authored
[ Upstream commit e86103a7 ] On BXT platform Host Controller and Device Controller figure as same PCI device but with different device function. HCD should not pass data to Device Controller but only to Host Controllers. Checking if companion device is Host Controller, otherwise skip. Cc: <stable@vger.kernel.org> Signed-off-by:
Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 13630746 ] Add a new NO_REPORT_LUNS quirk and set it for Seagate drives with an usb-id of: 0bc2:331a, as these will fail to respond to a REPORT_LUNS command. Cc: stable@vger.kernel.org Reported-and-tested-by:
David Webb <djw@noc.ac.uk> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Mathias Nyman authored
[ Upstream commit 98d74f9c ] PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected. Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints. For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset. For now the flag is only set for PCI connected host controllers. Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit ad6b1d91 ] The problem seems to be that if a new device is detected while we have already removed the shared HCD, then many of the xhci operations (e.g. xhci_alloc_dev(), xhci_setup_device()) hang as command never completes. I don't think XHCI can operate without the shared HCD as we've already called xhci_halt() in xhci_only_stop_hcd() when shared HCD goes away. We need to prevent new commands from being queued not only when HCD is dying but also when HCD is halted. The following lockup was detected while testing the otg state machine. [ 178.199951] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 178.205799] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 178.214458] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 178.223619] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 178.230677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 178.237796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 178.245358] usb usb1: Product: xHCI Host Controller [ 178.250483] usb usb1: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd [ 178.257783] usb usb1: SerialNumber: xhci-hcd.0.auto [ 178.267014] hub 1-0:1.0: USB hub found [ 178.272108] hub 1-0:1.0: 1 port detected [ 178.278371] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 178.284171] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 178.294038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 178.301183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 178.308776] usb usb2: Product: xHCI Host Controller [ 178.313902] usb usb2: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd [ 178.321222] usb usb2: SerialNumber: xhci-hcd.0.auto [ 178.329061] hub 2-0:1.0: USB hub found [ 178.333126] hub 2-0:1.0: 1 port detected [ 178.567585] dwc3 48890000.usb: usb_otg_start_host 0 [ 178.572707] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 178.578064] usb usb2: USB disconnect, device number 1 [ 178.586565] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 178.592585] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 178.597924] usb usb1: USB disconnect, device number 1 [ 178.603248] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 190.597337] INFO: task kworker/u4:0:6 blocked for more than 10 seconds. [ 190.604273] Not tainted 4.0.0-rc1-00024-g6111320 #1058 [ 190.610228] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 190.618443] kworker/u4:0 D c05c0ac0 0 6 2 0x00000000 [ 190.625120] Workqueue: usb_otg usb_otg_work [ 190.629533] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98) [ 190.636915] [<c05c10ac>] (schedule) from [<c05c1318>] (schedule_preempt_disabled+0xc/0x10) [ 190.645591] [<c05c1318>] (schedule_preempt_disabled) from [<c05c23d0>] (mutex_lock_nested+0x1ac/0x3fc) [ 190.655353] [<c05c23d0>] (mutex_lock_nested) from [<c046cf8c>] (usb_disconnect+0x3c/0x208) [ 190.664043] [<c046cf8c>] (usb_disconnect) from [<c0470cf0>] (_usb_remove_hcd+0x98/0x1d8) [ 190.672535] [<c0470cf0>] (_usb_remove_hcd) from [<c0485da8>] (usb_otg_start_host+0x50/0xf4) [ 190.681299] [<c0485da8>] (usb_otg_start_host) from [<c04849a4>] (otg_set_protocol+0x5c/0xd0) [ 190.690153] [<c04849a4>] (otg_set_protocol) from [<c0484b88>] (otg_set_state+0x170/0xbfc) [ 190.698735] [<c0484b88>] (otg_set_state) from [<c0485740>] (otg_statemachine+0x12c/0x470) [ 190.707326] [<c0485740>] (otg_statemachine) from [<c0053c84>] (process_one_work+0x1b4/0x4a0) [ 190.716162] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c) [ 190.724742] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0) [ 190.732328] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24) [ 190.739898] 5 locks held by kworker/u4:0/6: [ 190.744274] #0: ("%s""usb_otg"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.752799] #1: ((&otgd->work)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.761326] #2: (&otgd->fsm.lock){+.+.+.}, at: [<c048562c>] otg_statemachine+0x18/0x470 [ 190.769934] #3: (usb_bus_list_lock){+.+.+.}, at: [<c0470ce8>] _usb_remove_hcd+0x90/0x1d8 [ 190.778635] #4: (&dev->mutex){......}, at: [<c046cf8c>] usb_disconnect+0x3c/0x208 [ 190.786700] INFO: task kworker/1:0:14 blocked for more than 10 seconds. [ 190.793633] Not tainted 4.0.0-rc1-00024-g6111320 #1058 [ 190.799567] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 190.807783] kworker/1:0 D c05c0ac0 0 14 2 0x00000000 [ 190.814457] Workqueue: usb_hub_wq hub_event [ 190.818866] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98) [ 190.826252] [<c05c10ac>] (schedule) from [<c05c4e40>] (schedule_timeout+0x13c/0x1ec) [ 190.834377] [<c05c4e40>] (schedule_timeout) from [<c05c19f0>] (wait_for_common+0xbc/0x150) [ 190.843062] [<c05c19f0>] (wait_for_common) from [<bf068a3c>] (xhci_setup_device+0x164/0x5cc [xhci_hcd]) [ 190.852986] [<bf068a3c>] (xhci_setup_device [xhci_hcd]) from [<c046b7f4>] (hub_port_init+0x3f4/0xb10) [ 190.862667] [<c046b7f4>] (hub_port_init) from [<c046eb64>] (hub_event+0x704/0x1018) [ 190.870704] [<c046eb64>] (hub_event) from [<c0053c84>] (process_one_work+0x1b4/0x4a0) [ 190.878919] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c) [ 190.887503] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0) [ 190.895076] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24) [ 190.902650] 5 locks held by kworker/1:0/14: [ 190.907023] #0: ("usb_hub_wq"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.915454] #1: ((&hub->events)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.924070] #2: (&dev->mutex){......}, at: [<c046e490>] hub_event+0x30/0x1018 [ 190.931768] #3: (&port_dev->status_lock){+.+.+.}, at: [<c046eb50>] hub_event+0x6f0/0x1018 [ 190.940558] #4: (&bus->usb_address0_mutex){+.+.+.}, at: [<c046b458>] hub_port_init+0x58/0xb10 Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 71504062 ] This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by:
Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 0a380be8 ] On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit address memory pointers actually. So, in this case, this driver should call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller will be died after a usb device is connected if it runs on above 4GB physical memory environment. So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve such an issue. Cc: <stable@vger.kernel.org> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit 671ffdff ] Give USB3 devices a better chance to enumerate at USB 3 speeds if they are connected to a suspended host. Solves an issue with NEC uPD720200 host hanging when partially enumerating a USB3 device as USB2 after host controller runtime resume. Cc: <stable@vger.kernel.org> Tested-by:
Mike Murdoch <main.haarp@gmail.com> Signed-off-by:
-
Rafal Redzimski authored
[ Upstream commit 0d46faca ] Broxton B0 also requires XHCI_PME_STUCK_QUIRK. Adding PCI device ID for Broxton B and adding to quirk. Cc: <stable@vger.kernel.org> Signed-off-by:
Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by:
-
Rui Salvaterra authored
[ Upstream commit 3e26a691 ] Based on Sergey's test patch [1], this fixes zram with lz4 compression on big endian cpus. Note that the 64-bit preprocessor test is not a cleanup, it's part of the fix, since those identifiers are bogus (for example, __ppc64__ isn't defined anywhere else in the kernel, which means we'd fall into the 32-bit definitions on ppc64). Tested on ppc64 with no regression on x86_64. [1] http://marc.info/?l=linux-kernel&m=145994470805853&w=4 Cc: stable@vger.kernel.org Suggested-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by:
-
Andy Shevchenko authored
[ Upstream commit 3fe6409c ] The commit 89500520 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") cleaned up the code to avoid usage of depricated slave_id member of generic slave configuration. Meanwhile it broke the master selection by removing important call to dwc_set_masters() in ->device_alloc_chan_resources() which copied masters from custom slave configuration to the internal channel structure. Everything works until now since there is no customized connection of DesignWare DMA IP to the bus, i.e. one bus and one or more masters are in use. The configurations where 2 masters are connected to the different masters are not working anymore. We are expecting one user of such configuration and need to select masters properly. Besides that it is obviously a performance regression since only one master is in use in multi-master configuration. Select masters in accordance with what user asked for. Keep this patch in a form more suitable for back porting. We are safe to take necessary data in ->device_alloc_chan_resources() because we don't support generic slave configuration embedded into custom one, and thus the only way to provide such is to use the parameter to a filter function which is called exactly before channel resource allocation. While here, replase BUG_ON to less noisy dev_warn() and prevent channel allocation in case of error. Fixes: 89500520 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") Cc: stable@vger.kernel.org Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Kailang Yang authored
[ Upstream commit adcdd0d5 ] This is Dell usb dock audio workaround. It was fixed the master volume keep lower. [Some background: the patch essentially skips the controls of a couple of FU volumes. Although the firmware exposes the dB and the value information via the usb descriptor, changing the values (we set the min volume as default) screws up the device. Although this has been fixed in the newer firmware, the devices are shipped with the old firmware, thus we need the workaround in the driver side. -- tiwai] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
[ Upstream commit e549d190 ] The front mic jack (pink color) can't detect any plug or unplug. After applying this fix, both detecting function and recording function work well. BugLink: https://bugs.launchpad.net/bugs/1564712 Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
David Matlack authored
[ Upstream commit fc5b7f3b ] An interrupt handler that uses the fpu can kill a KVM VM, if it runs under the following conditions: - the guest's xcr0 register is loaded on the cpu - the guest's fpu context is not loaded - the host is using eagerfpu Note that the guest's xcr0 register and fpu context are not loaded as part of the atomic world switch into "guest mode". They are loaded by KVM while the cpu is still in "host mode". Usage of the fpu in interrupt context is gated by irq_fpu_usable(). The interrupt handler will look something like this: if (irq_fpu_usable()) { kernel_fpu_begin(); [... code that uses the fpu ...] kernel_fpu_end(); } As long as the guest's fpu is not loaded and the host is using eager fpu, irq_fpu_usable() returns true (interrupted_kernel_fpu_idle() returns true). The interrupt handler proceeds to use the fpu with the guest's xcr0 live. kernel_fpu_begin() saves the current fpu context. If this uses XSAVE[OPT], it may leave the xsave area in an undesirable state. According to the SDM, during XSAVE bit i of XSTATE_BV is not modified if bit i is 0 in xcr0. So it's possible that XSTATE_BV[i] == 1 and xcr0[i] == 0 following an XSAVE. kernel_fpu_end() restores the fpu context. Now if any bit i in XSTATE_BV == 1 while xcr0[i] == 0, XRSTOR generates a #GP. The fault is trapped and SIGSEGV is delivered to the current process. Only pre-4.2 kernels appear to be vulnerable to this sequence of events. Commit 653f52c3 ("kvm,x86: load guest FPU context more eagerly") from 4.2 forces the guest's fpu to always be loaded on eagerfpu hosts. This patch fixes the bug by keeping the host's xcr0 loaded outside of the interrupts-disabled region where KVM switches into guest mode. Cc: stable@vger.kernel.org Suggested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
David Matlack <dmatlack@google.com> [Move load after goto cancel_injection. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Helge Deller authored
[ Upstream commit 2ef4dfd9 ] Handling exceptions from modules never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. When a module triggers an exception in get_user() we need to load the main kernel dp value before accessing the exception_data structure, and afterwards restore the original dp value of the module on exit. Noticed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Christoph Lameter authored
[ Upstream commit 6ddb798f ] __get_cpu_var was removed. Update comments to refer to this_cpu_ptr() instead. Signed-off-by:
Christoph Lameter <cl@linux.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Helge Deller authored
[ Upstream commit ef72f311 ] The kernel module testcase (lib/test_user_copy.c) exhibited a kernel crash on parisc if the parameters for copy_from_user were reversed ("illegal reversed copy_to_user" testcase). Fix this potential crash by checking the fault handler if the faulting address is in the exception table. Signed-off-by:
-
Helge Deller authored
[ Upstream commit e3893027 ] We want to avoid the kernel module loader to create function pointers for the kernel fixup routines of get_user() and put_user(). Changing the external reference from function type to int type fixes this. This unbreaks exception handling for get_user() and put_user() when called from a kernel module. Signed-off-by:
-
Yong Li authored
[ Upstream commit 9b8e3ec3 ] The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Cc: stable@vger.kernel.org Signed-off-by:
Yong Li <sdliyong@gmail.com> Reviewed-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
