- 19 May, 2016 34 commits
-
-
Kangjie Lu authored
[ Upstream commit 79e48650 ] Stack object "dte_facilities" is allocated in x25_rx_call_request(), which is supposed to be initialized in x25_negotiate_facilities. However, 5 fields (8 bytes in total) are not initialized. This object is then copied to userland via copy_to_user, thus infoleak occurs. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikko Rapeli authored
uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h MIME-Version: 1.0 [ Upstream commit 4a91cb61 ] glibc's net/if.h contains copies of definitions from linux/if.h and these conflict and cause build failures if both files are included by application source code. Changes in uapi headers, which fixed header file dependencies to include linux/if.h when it was needed, e.g. commit 1ffad83d, made the net/if.h and linux/if.h incompatibilities visible as build failures for userspace applications like iproute2 and xtables-addons. This patch fixes compile errors when glibc net/if.h is included before linux/if.h: ./linux/if.h:99:21: error: redeclaration of enumerator ‘IFF_NOARP’ ./linux/if.h:98:23: error: redeclaration of enumerator ‘IFF_RUNNING’ ./linux/if.h:97:26: error: redeclaration of enumerator ‘IFF_NOTRAILERS’ ./linux/if.h:96:27: error: redeclaration of enumerator ‘IFF_POINTOPOINT’ ./linux/if.h:95:24: error: redeclaration of enumerator ‘IFF_LOOPBACK’ ./linux/if.h:94:21: error: redeclaration of enumerator ‘IFF_DEBUG’ ./linux/if.h:93:25: error: redeclaration of enumerator ‘IFF_BROADCAST’ ./linux/if.h:92:19: error: redeclaration of enumerator ‘IFF_UP’ ./linux/if.h:252:8: error: redefinition of ‘struct ifconf’ ./linux/if.h:203:8: error: redefinition of ‘struct ifreq’ ./linux/if.h:169:8: error: redefinition of ‘struct ifmap’ ./linux/if.h:107:23: error: redeclaration of enumerator ‘IFF_DYNAMIC’ ./linux/if.h:106:25: error: redeclaration of enumerator ‘IFF_AUTOMEDIA’ ./linux/if.h:105:23: error: redeclaration of enumerator ‘IFF_PORTSEL’ ./linux/if.h:104:25: error: redeclaration of enumerator ‘IFF_MULTICAST’ ./linux/if.h:103:21: error: redeclaration of enumerator ‘IFF_SLAVE’ ./linux/if.h:102:22: error: redeclaration of enumerator ‘IFF_MASTER’ ./linux/if.h:101:24: error: redeclaration of enumerator ‘IFF_ALLMULTI’ ./linux/if.h:100:23: error: redeclaration of enumerator ‘IFF_PROMISC’ The cases where linux/if.h is included before net/if.h need a similar fix in the glibc side, or the order of include files can be changed userspace code as a workaround. This change was tested in x86 userspace on Debian unstable with scripts/headers_compile_test.sh: $ make headers_install && \ cd usr/include && ../../scripts/headers_compile_test.sh -l -k ... cc -Wall -c -nostdinc -I /usr/lib/gcc/i586-linux-gnu/5/include -I /usr/lib/gcc/i586-linux-gnu/5/include-fixed -I . -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH/i586-linux-gnu -o /dev/null ./linux/if.h_libc_before_kernel.h PASSED libc before kernel test: ./linux/if.h Reported-by:
Jan Engelhardt <jengelh@inai.de> Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Reported-by:
Stephen Hemminger <shemming@brocade.com> Reported-by:
Waldemar Brodkorb <mail@waldemar-brodkorb.de> Cc: Gabriel Laskar <gabriel@lse.epita.fr> Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 856ce5d0 ] With the newly introduced helper functions the skb pulling is hidden in the checksumming function - and undone before returning to the caller. The IGMP and MLD query parsing functions in the bridge still assumed that the skb is pointing to the beginning of the IGMP/MLD message while it is now kept at the beginning of the IPv4/6 header. If there is a querier somewhere else, then this either causes the multicast snooping to stay disabled even though it could be enabled. Or, if we have the querier enabled too, then this can create unnecessary IGMP / MLD query messages on the link. Fixing this by taking the offset between IP and IGMP/MLD header into account, too. Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code") Reported-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 31ca0458 ] get_bridge_ifindices() is used from the old "deviceless" bridge ioctl calls which aren't called with rtnl held. The comment above says that it is called with rtnl but that is not really the case. Here's a sample output from a test ASSERT_RTNL() which I put in get_bridge_ifindices and executed "brctl show": [ 957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30) [ 957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G W O 4.6.0-rc4+ #157 [ 957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 957.423009] 0000000000000000 ffff880058adfdf0 ffffffff8138dec5 0000000000000400 [ 957.423009] ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32 0000000000000001 [ 957.423009] 00007ffec1a444b0 0000000000000400 ffff880053c19130 0000000000008940 [ 957.423009] Call Trace: [ 957.423009] [<ffffffff8138dec5>] dump_stack+0x85/0xc0 [ 957.423009] [<ffffffffa05ead32>] br_ioctl_deviceless_stub+0x212/0x2e0 [bridge] [ 957.423009] [<ffffffff81515beb>] sock_ioctl+0x22b/0x290 [ 957.423009] [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700 [ 957.423009] [<ffffffff8126c159>] SyS_ioctl+0x79/0x90 [ 957.423009] [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1 Since it only reads bridge ifindices, we can use rcu to safely walk the net device list. Also remove the wrong rtnl comment above. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ian Campbell authored
[ Upstream commit dedc58e0 ] The peer may be expecting a reply having sent a request and then done a shutdown(SHUT_WR), so tearing down the whole socket at this point seems wrong and breaks for me with a client which does a SHUT_WR. Looking at other socket family's stream_recvmsg callbacks doing a shutdown here does not seem to be the norm and removing it does not seem to have had any adverse effects that I can see. I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact on the vmci transport. Signed-off-by:
Ian Campbell <ian.campbell@docker.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Daniel Jurgens authored
[ Upstream commit 82d69203 ] Use htons instead of unconditionally byte swapping nexthdr. On a little endian systems shifting the byte is correct behavior, but it results in incorrect csums on big endian architectures. Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Carol Soto <clsoto@us.ibm.com> Tested-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 5f8e4474 ] The stack object “map” has a total size of 32 bytes. Its last 4 bytes are padding generated by compiler. These padding bytes are not initialized and sent out via “nla_put”. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit b8670c09 ] The stack object “info” has a total size of 12 bytes. Its last byte is padding which is not initialized and leaked via “put_cmsg”. Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit 1c021bb7 ] In the receive path a queue's work bit was cleared unconditionally even if fec_enet_rx_queue only read out a part of the available packets from the hardware. This resulted in not reading any packets in the next napi turn and so packets were delayed or lost. The obvious fix is to only clear a queue's bit when the queue was emptied. Fixes: 4d494cdc ("net: fec: change data structure to support multiqueue") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Fugang Duan <fugang.duan@nxp.com> Acked-by:
-
Neil Horman authored
[ Upstream commit 6071bd1a ] This was recently reported to me, and reproduced on the latest net kernel, when attempting to run netperf from a host that had a netem qdisc attached to the egress interface: [ 788.073771] ---------------------[ cut here ]--------------------------- [ 788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda() [ 788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962 data_len=0 gso_size=1448 gso_type=1 ip_summed=3 [ 788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log dm_mod [ 788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W ------------ 3.10.0-327.el7.x86_64 #1 [ 788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012 [ 788.542260] ffff880437c036b8 f7afc56532a53db9 ffff880437c03670 ffffffff816351f1 [ 788.576332] ffff880437c036a8 ffffffff8107b200 ffff880633e74200 ffff880231674000 [ 788.611943] 0000000000000001 0000000000000003 0000000000000000 ffff880437c03710 [ 788.647241] Call Trace: [ 788.658817] <IRQ> [<ffffffff816351f1>] dump_stack+0x19/0x1b [ 788.686193] [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0 [ 788.713803] [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80 [ 788.741314] [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100 [ 788.767018] [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda [ 788.796117] [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190 [ 788.823392] [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem] [ 788.854487] [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570 [ 788.880870] [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0 ... The problem occurs because netem is not prepared to handle GSO packets (as it uses skb_checksum_help in its enqueue path, which cannot manipulate these frames). The solution I think is to simply segment the skb in a simmilar fashion to the way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes. When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt the first segment, and enqueue the remaining ones. tested successfully by myself on the latest net kernel, to which this applies Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: "David S. Miller" <davem@davemloft.net> CC: netem@lists.linux-foundation.org CC: eric.dumazet@gmail.com CC: stephen@networkplumber.org Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit bdf17661 ] Similarly, we need to update backlog too when we update qlen. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 431e3a8e ] We saw qlen!=0 but backlog==0 on our production machine: qdisc htb 1: dev eth0 root refcnt 2 r2q 10 default 1 direct_packets_stat 0 ver 3.17 Sent 172680457356 bytes 222469449 pkt (dropped 0, overlimits 123575834 requeues 0) backlog 0b 72p requeues 0 The problem is we only count qlen for HTB qdisc but not backlog. We need to update backlog too when we update qlen, so that we can at least know the average packet length. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 2ccccf5f ] When the bottom qdisc decides to, for example, drop some packet, it calls qdisc_tree_decrease_qlen() to update the queue length for all its ancestors, we need to update the backlog too to keep the stats on root qdisc accurate. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
-
WANG Cong authored
[ Upstream commit 86a7996c ] Remove nearly duplicated code and prepare for the following patch. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
-
Jiri Benc authored
[ Upstream commit b7f8fe25 ] iptunnel_pull_header expects that IP header was already pulled; with this expectation, it pulls the tunnel header. This is not true in gre_err. Furthermore, ipv4_update_pmtu and ipv4_redirect expect that skb->data points to the IP header. We cannot pull the tunnel header in this path. It's just a matter of not calling iptunnel_pull_header - we don't need any of its effects. Fixes: bda7bb46 ("gre: Allow multiple protocol listener for gre protocol.") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Tim Bingham authored
[ Upstream commit 2c94b537 ] Prior to commit d92cff89 ("net_dbg_ratelimited: turn into no-op when !DEBUG") the implementation of net_dbg_ratelimited() was buggy for both the DEBUG and CONFIG_DYNAMIC_DEBUG cases. The bug was that net_ratelimit() was being called and, despite returning true, nothing was being printed to the console. This resulted in messages like the following - "net_ratelimit: %d callbacks suppressed" with no other output nearby. After commit d92cff89 ("net_dbg_ratelimited: turn into no-op when !DEBUG") the bug is fixed for the DEBUG case. However, there's no output at all for CONFIG_DYNAMIC_DEBUG case. This patch restores debug output (if enabled) for the CONFIG_DYNAMIC_DEBUG case. Add a definition of net_dbg_ratelimited() for the CONFIG_DYNAMIC_DEBUG case. The implementation takes care to check that dynamic debugging is enabled before calling net_ratelimit(). Fixes: d92cff89 ("net_dbg_ratelimited: turn into no-op when !DEBUG") Signed-off-by:
Tim Bingham <tbingham@akamai.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 569cc39d ] llvm cannot always recognize memset as builtin function and optimize it away, so just delete it. It was a leftover from testing of bpf_perf_event_output() with large data structures. Fixes: 39111695 ("samples: bpf: add bpf_perf_event_output example") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 6aff67c8 ] The commit 35578d79 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter") introduced clever way to check bpf_helper<->map_type compatibility. Later on commit a43eec30 ("bpf: introduce bpf_perf_event_output() helper") adjusted the logic and inadvertently broke it. Get rid of the clever bool compare and go back to two-way check from map and from helper perspective. Fixes: a43eec30 ("bpf: introduce bpf_perf_event_output() helper") Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 92117d84 ] On a system with >32Gbyte of phyiscal memory and infinite RLIMIT_MEMLOCK, the malicious application may overflow 32-bit bpf program refcnt. It's also possible to overflow map refcnt on 1Tb system. Impose 32k hard limit which means that the same bpf program or map cannot be shared by more than 32k processes. Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Reported-by:
-
Jann Horn authored
[ Upstream commit 8358b02b ] When bpf(BPF_PROG_LOAD, ...) was invoked with a BPF program whose bytecode references a non-map file descriptor as a map file descriptor, the error handling code called fdput() twice instead of once (in __bpf_map_get() and in replace_map_fd_with_map_ptr()). If the file descriptor table of the current task is shared, this causes f_count to be decremented too much, allowing the struct file to be freed while it is still in use (use-after-free). This can be exploited to gain root privileges by an unprivileged user. This bug was introduced in commit 0246e64d ("bpf: handle pseudo BPF_LD_IMM64 insn"), but is only exploitable since commit 1be7f75d ("bpf: enable non-root eBPF programs") because previously, CAP_SYS_ADMIN was required to reach the vulnerable code. (posted publicly according to request by maintainer) Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
-
Eric Dumazet authored
[ Upstream commit fc96256c ] When multiple skb are TX-completed in a row, we might incorrectly keep a timestamp of a prior skb and cause extra work. Fixes: ec693d47 ("net/mlx4_en: Add HW timestamping (TS) support") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 391a2033 ] After commit fbd40ea0 ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit d8edd246 ] Minimum MTU that can be set in Connectx4 device is 68. This fixes the case where a user wants to set invalid MTU, the driver will fail to satisfy this request and the interface will stay down. It is better to report an error and continue working with old mtu. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 046339ea ] For set/query MTU port firmware commands the MTU field is 16 bits, here I changed all the "int mtu" parameters of the functions wrapping those firmware commands to be u16. Signed-off-by:
-
Simon Horman authored
[ Upstream commit b4f70527 ] When using masked actions the ipv6_proto field of an action to set IPv6 fields may be zero rather than the prevailing protocol which will result in skipping checksum recalculation. This patch resolves the problem by relying on the protocol in the flow key rather than that in the set field action. Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.") Cc: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit f43bfaed ] atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by:
Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 9241e2df ] When __vlan_insert_tag() fails from skb_vlan_push() path due to the skb_cow_head(), we need to undo the __skb_push() in the error path as well that was done earlier to move skb->data pointer to mac header. Moreover, I noticed that when in the non-error path the __skb_pull() is done and the original offset to mac header was non-zero, we fixup from a wrong skb->data offset in the checksum complete processing. So the skb_postpush_rcsum() really needs to be done before __skb_pull() where skb->data still points to the mac header start and thus operates under the same conditions as in __vlan_insert_tag(). Fixes: 93515d53 ("net: move vlan pop/push functions into common code") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 6b83d28a ] Replace individual implementations with the recently introduced skb_postpush_rcsum() helper. Signed-off-by:
Tom Herbert <tom@herbertland.com> Acked-by:
-
Bjørn Mork authored
[ Upstream commit c5b5343c ] We now have a positive report of another Huawei device needing this quirk: The ME906s-158 (12d1:15c1). This is an m.2 form factor modem with no obvious relationship to the E3372 (12d1:157d) we already have a quirk entry for. This is reason enough to believe the quirk might be necessary for any number of current and future Huawei devices. Applying the quirk to all Huawei devices, since it is crucial to any device affected by the firmware bug, while the impact on non-affected devices is negligible. The quirk can if necessary be disabled per-device by writing N to /sys/class/net/<iface>/cdc_ncm/ndp_to_end Reported-by:
Andreas Fett <andreas.fett@secunet.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit d82bccc6 ] verifier must check for reserved size bits in instruction opcode and reject BPF_LD | BPF_ABS | BPF_DW and BPF_LD | BPF_IND | BPF_DW instructions, otherwise interpreter will WARN_RATELIMIT on them during execution. Fixes: ddd872bc ("bpf: verifier: add checks for BPF_ABS | BPF_IND instructions") Signed-off-by:
-
Lars Persson authored
[ Upstream commit 3dcd493f ] A failure in validate_xmit_skb_list() triggered an unconditional call to dev_requeue_skb with skb=NULL. This slowly grows the queue discipline's qlen count until all traffic through the queue stops. We take the optimistic approach and continue running the queue after a failure since it is unknown if later packets also will fail in the validate path. Fixes: 55a93b3e ("qdisc: validate skb without holding lock") Signed-off-by:
Lars Persson <larper@axis.com> Acked-by:
-
Mathias Krause authored
[ Upstream commit 309cf37f ] Because we miss to wipe the remainder of i->addr[] in packet_mc_add(), pdiag_put_mclist() leaks uninitialized heap bytes via the PACKET_DIAG_MCLIST netlink attribute. Fix this by explicitly memset(0)ing the remaining bytes in i->addr[]. Fixes: eea68e2f ("packet: Report socket mclist info via diag module") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by:
Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Chris Friesen authored
[ Upstream commit d6d5e999 ] For local routes that require a particular output interface we do not want to cache the result. Caching the result causes incorrect behaviour when there are multiple source addresses on the interface. The end result being that if the intended recipient is waiting on that interface for the packet he won't receive it because it will be delivered on the loopback interface and the IP_PKTINFO ipi_ifindex will be set to the loopback interface as well. This can be tested by running a program such as "dhcp_release" which attempts to inject a packet on a particular interface so that it is received by another program on the same board. The receiving process should see an IP_PKTINFO ipi_ifndex value of the source interface (e.g., eth1) instead of the loopback interface (e.g., lo). The packet will still appear on the loopback interface in tcpdump but the important aspect is that the CMSG info is correct. Sample dhcp_release command line: dhcp_release eth1 192.168.204.222 02:11:33:22:44:66 Signed-off-by:
Allain Legacy <allain.legacy@windriver.com> Signed off-by: Chris Friesen <chris.friesen@windriver.com> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
David S. Miller authored
[ Upstream commit a36a0d40 ] In particular, make sure we check for decnet private presence for loopback devices. Signed-off-by:
-
- 11 May, 2016 6 commits
-
-
Greg Kroah-Hartman authored
-
Mat Martineau authored
commit a41c8882 upstream. The driver does not load firmware for unknown steppings, so these new steppings must be added to the list. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 72676bb5 upstream. Recently added commit 564b026f ("string_helpers: fix precision loss for some inputs") fixed precision issues for string_get_size() and broke tests. Fix and improve them: test both STRING_UNITS_2 and STRING_UNITS_10 at a time, better failure reporting, test small an huge values. Fixes: 564b026f ("string_helpers: fix precision loss for some inputs") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: James Bottomley <JBottomley@Odin.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Srinivas Pandruvada authored
commit a2121167 upstream. There are several reports of freeze on enabling HWP (Hardware PStates) feature on Skylake-based systems by the Intel P-states driver. The root cause is identified as the HWP interrupts causing BIOS code to freeze. HWP interrupts use the thermal LVT which can be handled by Linux natively, but on the affected Skylake-based systems SMM will respond to it by default. This is a problem for several reasons: - On the affected systems the SMM thermal LVT handler is broken (it will crash when invoked) and a BIOS update is necessary to fix it. - With thermal interrupt handled in SMM we lose all of the reporting features of the arch/x86/kernel/cpu/mcheck/therm_throt driver. - Some thermal drivers like x86-package-temp depend on the thermal threshold interrupts signaled via the thermal LVT. - The HWP interrupts are useful for debugging and tuning performance (if the kernel can handle them). The native handling of thermal interrupts needs to be enabled because of that. This requires some way to tell SMM that the OS can handle thermal interrupts. That can be done by using _OSC/_PDC in processor scope very early during ACPI initialization. The meaning of _OSC/_PDC bit 12 in processor scope is whether or not the OS supports native handling of interrupts for Collaborative Processor Performance Control (CPPC) notifications. Since on HWP-capable systems CPPC is a firmware interface to HWP, setting this bit effectively tells the firmware that the OS will handle thermal interrupts natively going forward. For details on _OSC/_PDC refer to: http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html To implement the _OSC/_PDC handshake as described, introduce a new function, acpi_early_processor_osc(), that walks the ACPI namespace looking for ACPI processor objects and invokes _OSC for them with bit 12 in the capabilities buffer set and terminates the namespace walk on the first success. Also modify intel_thermal_interrupt() to clear HWP status bits in the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents them from firing continuously). Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject & changelog, function rename ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Shashank Sharma authored
commit 60b3143c upstream. This patch does the following: - Fakes live status of HDMI as connected (even if that's not). While testing certain (monitor + cable) combinations with various intel platforms, it seems that live status register doesn't work reliably on some older devices. So limit the live_status check for HDMI detection, only for platforms from gen7 onwards. V2: restrict faking live_status to certain platforms V3: (Ville) - keep the debug message for !live_status case - fix indentation of comment - remove "warning" from the debug message (Jani) - Change format of fix details in the commit message Fixes: 237ed86c ("drm/i915: Check live status before reading edid") Suggested-by:
Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461237606-16491-1-git-send-email-shashank.sharma@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 4ea39590 upstream. Somehow my SNB GT1 (Dell XPS 8300) gets very unhappy around GPU hangs if the RPS EI/thresholds aren't suitably aligned. It seems like scheduling/timer interupts stop working somehow and things get stuck eg. in usleep_range(). I bisected the problem down to commit 8a586437 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") I observed that before all the values were at least multiples of 25, but afterwards they are not. And rounding things up to the next multiple of 25 does seem to help, so lets' do that. I also tried roundup(..., 5) but that wasn't sufficient. Also I have no idea if we might need this sort of thing on gen9+ as well. These are the original EI/thresholds: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10250 GEN6_RP_UP_THRESHOLD 9225 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 8000 GEN6_RP_UP_THRESHOLD 6800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 These are after 8a586437: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10156 GEN6_RP_UP_THRESHOLD 9140 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7812 GEN6_RP_UP_THRESHOLD 6640 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 And these are what we have after this patch: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10175 GEN6_RP_UP_THRESHOLD 9150 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7825 GEN6_RP_UP_THRESHOLD 6650 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Testcase: igt/kms_pipe_crc_basic/hang-read-crc-pipe-B Fixes: 8a586437 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> (cherry picked from commit 8a292d01) Signed-off-by:
-
