- 19 Dec, 2006 4 commits
-
-
Dave Airlie authored
Align some r128 license comments Signed-off-by:Dave Airlie <airlied@linux.ie>
-
Dave Airlie authored
Signed-off-by: -
Dave Airlie authored
Signed-off-by: -
Eric Anholt authored
Signed-off-by:
-
- 15 Dec, 2006 1 commit
-
-
=?utf-8?q?Michel_D=C3=A4nzer?= authored
Replace r300_check_offset() with generic radeon_check_offset(), which doesn't reject valid offsets when the framebuffer area is at the very end of the card's 32 bit address space. Make radeon_check_and_fixup_offset() use radeon_check_offset() as well. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=7697 .
-
- 11 Dec, 2006 3 commits
-
-
=?utf-8?q?Michel_D=C3=A4nzer?= authored
Previously, if there were several buffer swaps scheduled for the same vertical blank, all but the first blit emitted stood a chance of exhibiting tearing. In order to avoid this, split the blits along slices of each output top to bottom. Signed-off-by: -
Jeff Garzik authored
Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Akinobu Mita authored
class_create() and class_device_create() return error code as a pointer on failure. These return values need to be checked by IS_ERR(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
- 10 Dec, 2006 32 commits
-
-
Ralf Baechle authored
On a CPU with aliases the IDE core needs to flush caches in the special IDE variants of insw, insl etc. If IDE support is built as a module this will only work if local_flush_data_cache_page happens is exported as a module. As per policy export local_flush_data_cache_page as GPL symbol only. Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
This is required for ipmi_poweroff.c to work as a module. Signed-off-by: -
Ralf Baechle authored
ibmtr.c and typhoon.c use it. Signed-off-by: -
Ralf Baechle authored
This eleminates the need to include ptrace.h into system.h and fixes a harmless namespace conflict on the PC symbol in bpck.c. Signed-off-by: -
Ralf Baechle authored
This fixes fairly unobvious breakage of various drivers. Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Herbert Xu authored
As CBC is the default chaining method for cryptoloop, we should select it from cryptoloop to ease the transition. Spotted by Rene Herman. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Cal Peake authored
Add MODULE_* attributes to the new bit reversal library. Most notably MODULE_LICENSE which prevents superfluous kernel tainting. Signed-off-by:
Cal Peake <cp@absolutedigital.net> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix several kprobes bugs. [SPARC64]: Update defconfig. [SPARC64]: dma remove extra brackets [SPARC{32,64}]: Propagate ptrace_traceme() return value. [SPARC64]: Replace kmalloc+memset with kzalloc [SPARC]: Check kzalloc() return value in SUN4D irq/iommu init. [SPARC]: Replace kmalloc+memset with kzalloc [SPARC64]: Run ctrl-alt-del action for sun4v powerdown request. [SPARC64]: Unaligned accesses to userspace are hard errors. [SPARC64]: Call do_mathemu on illegal instruction traps too. [SPARC64]: Update defconfig. [SPARC64]: Add irqtrace/stacktrace/lockdep support. -
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (132 commits) V4L/DVB 4949b: Fix container_of pointer retreival V4L/DVB (4949a): Fix INIT_WORK V4L/DVB (4949): Cxusb: codingstyle cleanups V4L/DVB (4948): Cxusb: Convert tuner functions to use dvb_pll_attach V4L/DVB (4947): Cx88: trivial cleanups V4L/DVB (4946): Cx88: Move cx88_dvb_bus_ctrl out of the card-specific area V4L/DVB (4945): Cx88: consolidate cx22702_config structs V4L/DVB (4944): Cx88: Convert DViCO FusionHDTV Hybrid to use dvb_pll_attach V4L/DVB (4943): Cx88: cleanup dvb_pll_attach for lgdt3302 tuners V4L/DVB (4953): Usbvision minor fixes V4L/DVB (4951): Add version.h, since it is required for VIDIOC_QUERYCAP V4L/DVB (4940): Or51211: Changed SNR and signal strength calculations V4L/DVB (4939): Or51132: Changed SNR and signal strength reporting V4L/DVB (4938): Cx88: Convert lgdt3302 tuning function to use dvb_pll_attach V4L/DVB (4941): Remove LINUX_VERSION_CODE and fix identations V4L/DVB (4942): Whitespace cleanups V4L/DVB (4937): Usbvision cleanup and code reorganization V4L/DVB (4936): Make MT4049FM5 tuner to set FM Gain to Normal V4L/DVB (4935): Added the capability of selecting fm gain by tuner V4L/DVB (4934): Usbvision radio requires GainNormal at e register ...
-
Avi Kivity authored
web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by:
Yaniv Kamay <yaniv@qumranet.com> Signed-off-by:
Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by:
Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Anthony Liguori <anthony@codemonkey.ws> Signed-off-by:
-
Daniel Walker authored
Mostly changing alignment. Just some general cleanup. [akpm@osdl.org: build fix] Signed-off-by:
Daniel Walker <dwalker@mvista.com> Acked-by:
John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Daniel Walker authored
Simply adds some ifdefs to remove clocksoure sysfs code when CONFIG_SYSFS isn't turn on. Signed-off-by:
-
Arjan van de Ven authored
This patch introduces users of the round_jiffies() function in the slab code. The slab code has a few "run every second" timers for background work; these are obviously not timing critical as long as they happen roughly at the right frequency. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Arjan van de Ven authored
This patch introduces a user: of the round_jiffies() function; the "5 second" ext3/jbd wakeup. While "every 5 seconds" doesn't sound as a problem, there can be many of these (and these timers do add up over all the kernel). The "5 second" wakeup isn't really timing sensitive; in addition even with rounding it'll still happen every 5 seconds (with the exception of the very first time, which is likely to be rounded up to somewhere closer to 6 seconds) Signed-off-by:
-
Arjan van de Ven authored
Introduce a round_jiffies() function as well as a round_jiffies_relative() function. These functions round a jiffies value to the next whole second. The primary purpose of this rounding is to cause all "we don't care exactly when" timers to happen at the same jiffy. This avoids multiple timers firing within the second for no real reason; with dynamic ticks these extra timers cause wakeups from deep sleep CPU sleep states and thus waste power. The exact wakeup moment is skewed by the cpu number, to avoid all cpus from waking up at the exact same time (and hitting the same lock/cachelines there) [akpm@osdl.org: fix variable type] Signed-off-by:
-
Vadim Lobanov authored
This patch provides an improved fdtable allocation scheme, useful for expanding fdtable file descriptor entries. The main focus is on the fdarray, as its memory usage grows 128 times faster than that of an fdset. The allocation algorithm sizes the fdarray in such a way that its memory usage increases in easy page-sized chunks. The overall algorithm expands the allowed size in powers of two, in order to amortize the cost of invoking vmalloc() for larger allocation sizes. Namely, the following sizes for the fdarray are considered, and the smallest that accommodates the requested fd count is chosen: pagesize / 4 pagesize / 2 pagesize <- memory allocator switch point pagesize * 2 pagesize * 4 ...etc... Unlike the current implementation, this allocation scheme does not require a loop to compute the optimal fdarray size, and can be done in efficient straightline code. Furthermore, since the fdarray overflows the pagesize boundary long before any of the fdsets do, it makes sense to optimize run-time by allocating both fdsets in a single swoop. Even together, they will still be, by far, smaller than the fdarray. The fdtable->open_fds is now used as the anchor for the fdset memory allocation. Signed-off-by:Vadim Lobanov <vlobanov@speakeasy.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by:
-
Vadim Lobanov authored
An fdtable can either be embedded inside a files_struct or standalone (after being expanded). When an fdtable is being discarded after all RCU references to it have expired, we must either free it directly, in the standalone case, or free the files_struct it is contained within, in the embedded case. Currently the free_files field controls this behavior, but we can get rid of it entirely, as all the necessary information is already recorded. We can distinguish embedded and standalone fdtables using max_fds, and if it is embedded we can divine the relevant files_struct using container_of(). Signed-off-by:
-
Vadim Lobanov authored
Currently, each fdtable supports three dynamically-sized arrays of data: the fdarray and two fdsets. The code allows the number of fds supported by the fdarray (fdtable->max_fds) to differ from the number of fds supported by each of the fdsets (fdtable->max_fdset). In practice, it is wasteful for these two sizes to differ: whenever we hit a limit on the smaller-capacity structure, we will reallocate the entire fdtable and all the dynamic arrays within it, so any delta in the memory used by the larger-capacity structure will never be touched at all. Rather than hogging this excess, we shouldn't even allocate it in the first place, and keep the capacities of the fdarray and the fdsets equal. This patch removes fdtable->max_fdset. As an added bonus, most of the supporting code becomes simpler. Signed-off-by:
-
Vadim Lobanov authored
The dup_fd() function creates a new files_struct and fdtable embedded inside that files_struct, and then possibly expands the fdtable using expand_files(). The out_release error path is invoked when expand_files() returns an error code. However, when this attempt to expand fails, the fdtable is left in its original embedded form, so it is pointless to try to free the associated fdarray and fdsets. Signed-off-by:
-
Zach Brown authored
The wait_for_more_bios() function name was poorly chosen. While looking to clean it up it I noticed that the dio struct refcounting between the bio completion and dio submission paths was racey. The bio submission path was simply freeing the dio struct if atomic_dec_and_test() indicated that it dropped the final reference. The aio bio completion path was dereferencing its dio struct pointer *after dropping its reference* based on the remaining number of references. These two paths could race and result in the aio bio completion path dereferencing a freed dio, though this was not observed in the wild. This moves the refcount under the bio lock so that bio completion can drop its reference and decide to wake all in one atomic step. Once testing and waking is locked dio_await_one() can test its sleeping condition and mark itself uninterruptible under the lock. It gets simpler and wait_for_more_bios() disappears. The addition of the interrupt masking spin lock acquiry in dio_bio_submit() looks alarming. This lock acquiry existed in that path before the recent dio completion patch set. We shouldn't expect significant performance regression from returning to the behaviour that existed before the completion clean up work. This passed 4k block ext3 O_DIRECT fsx and aio-stress on an SMP machine. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Suparna Bhattacharya <suparna@in.ibm.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: <xfs-masters@oss.sgi.com> Signed-off-by:
-
Zach Brown authored
The only time it is safe to call aio_complete() is when the ->ki_retry function returns -EIOCBQUEUED to the AIO core. direct_io_worker() has historically done this by relying on its caller to translate positive return codes into -EIOCBQUEUED for the aio case. It did this by trying to keep conditionals in sync. direct_io_worker() knew when finished_one_bio() was going to call aio_complete(). It would reverse the test and wait and free the dio in the cases it thought that finished_one_bio() wasn't going to. Not surprisingly, it ended up getting it wrong. 'ret' could be a negative errno from the submission path but it failed to communicate this to finished_one_bio(). direct_io_worker() would return < 0, it's callers wouldn't raise -EIOCBQUEUED, and aio_complete() would be called. In the future finished_one_bio()'s tests wouldn't reflect this and aio_complete() would be called for a second time which can manifest as an oops. The previous cleanups have whittled the sync and async completion paths down to the point where we can collapse them and clearly reassert the invariant that we must only call aio_complete() after returning -EIOCBQUEUED. direct_io_worker() will only return -EIOCBQUEUED when it is not the last to drop the dio refcount and the aio bio completion path will only call aio_complete() when it is the last to drop the dio refcount. direct_io_worker() can ensure that it is the last to drop the reference count by waiting for bios to drain. It does this for sync ops, of course, and for partial dio writes that must fall back to buffered and for aio ops that saw errors during submission. This means that operations that end up waiting, even if they were issued as aio ops, will not call aio_complete() from dio. Instead we return the return code of the operation and let the aio core call aio_complete(). This is purposely done to fix a bug where AIO DIO file extensions would call aio_complete() before their callers have a chance to update i_size. Now that direct_io_worker() is explicitly returning -EIOCBQUEUED its callers no longer have to translate for it. XFS needs to be careful not to free resources that will be used during AIO completion if -EIOCBQUEUED is returned. We maintain the previous behaviour of trying to write fs metadata for O_SYNC aio+dio writes. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Cc: <xfs-masters@oss.sgi.com> Signed-off-by:
-
Zach Brown authored
Now that we have a single refcount and waiting path we can reuse it in the async 'should_wait' path. It continues to rely on the fragile link between the conditional in dio_complete_aio() which decides to complete the AIO and the conditional in direct_io_worker() which decides to wait and free. By waiting before dropping the reference we stop dio_bio_end_aio() from calling dio_complete_aio() which used to wake up the waiter after seeing the reference count drop to 0. We hoist this wake up into dio_bio_end_aio() which now notices when it's left a single remaining reference that is held by the waiter. Signed-off-by:
-
Zach Brown authored
Previously we had two confusing counts of bio progress. 'bio_count' was decremented as bios were processed and freed by the dio core. It was used to indicate final completion of the dio operation. 'bios_in_flight' reflected how many bios were between submit_bio() and bio->end_io. It was used by the sync path to decide when to wake up and finish completing bios and was ignored by the async path. This patch collapses the two notions into one notion of a dio reference count. bios hold a dio reference when they're between submit_bio and bio->end_io. Since bios_in_flight was only used in the sync path it is now equivalent to dio->refcount - 1 which accounts for direct_io_worker() holding a reference for the duration of the operation. dio_bio_complete() -> finished_one_bio() was called from the sync path after finding bios on the list that the bio->end_io function had deposited. finished_one_bio() can not drop the dio reference on behalf of these bios now because bio->end_io already has. The is_async test in finished_one_bio() meant that it never actually did anything other than drop the bio_count for sync callers. So we remove its refcount decrement, don't call it from dio_bio_complete(), and hoist its call up into the async dio_bio_complete() caller after an explicit refcount decrement. It is renamed dio_complete_aio() to reflect the remaining work it actually does. Signed-off-by:
-
Zach Brown authored
We only need to call blk_run_address_space() once after all the bios for the direct IO op have been submitted. This removes the chance of calling blk_run_address_space() after spurious wake ups as the sync path waits for bios to drain. It's also one less difference betwen the sync and async paths. In the process we remove a redundant dio_bio_submit() that its caller had already performed. Signed-off-by:
-
Zach Brown authored
There have been a lot of bugs recently due to the way direct_io_worker() tries to decide how to finish direct IO operations. In the worst examples it has failed to call aio_complete() at all (hang) or called it too many times (oops). This set of patches cleans up the completion phase with the goal of removing the complexity that lead to these bugs. We end up with one path that calculates the result of the operation after all off the bios have completed. We decide when to generate a result of the operation using that path based on the final release of a refcount on the dio structure. I tried to progress towards the final state in steps that were relatively easy to understand. Each step should compile but I only tested the final result of having all the patches applied. I've tested these on low end PC drives with aio-stress, the direct IO tests I could manage to get running in LTP, orasim, and some home-brew functional tests. In http://lkml.org/lkml/2006/9/21/103 IBM reports success with ext2 and ext3 running DIO LTP tests. They found that XFS bug which has since been addressed in the patch series. This patch: The mechanics which decide the result of a direct IO operation were duplicated in the sync and async paths. The async path didn't check page_errors which can manifest as silently returning success when the final pointer in an operation faults and its matching file region is filled with zeros. The sync path and async path differed in whether they passed errors to the caller's dio->end_io operation. The async path was passing errors to it which trips an assertion in XFS, though it is apparently harmless. This centralizes the completion phase of dio ops in one place. AIO will now return EFAULT consistently and all paths fall back to the previously sync behaviour of passing the number of bytes 'transferred' to the dio->end_io callback, regardless of errors. dio_await_completion() doesn't have to propogate EIO from non-uptodate bios now that it's being propogated through dio_complete() via dio->io_error. This lets it return void which simplifies its sole caller. Signed-off-by:
-
NeilBrown authored
Fix few bugs that meant that: - superblocks weren't alway written at exactly the right time (this could show up if the array was not written to - writting to the array causes lots of superblock updates and so hides these errors). - restarting device recovery after a clean shutdown (version-1 metadata only) didn't work as intended (or at all). 1/ Ensure superblock is updated when a new device is added. 2/ Remove an inappropriate test on MD_RECOVERY_SYNC in md_do_sync. The body of this if takes one of two branches depending on whether MD_RECOVERY_SYNC is set, so testing it in the clause of the if is wrong. 3/ Flag superblock for updating after a resync/recovery finishes. 4/ If we find the neeed to restart a recovery in the middle (version-1 metadata only) make sure a full recovery (not just as guided by bitmaps) does get done. Signed-off-by:Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
Currently raid5 depends on clearing the BIO_UPTODATE flag to signal an error to higher levels. While this should be sufficient, it is safer to explicitly set the error code as well - less room for confusion. Signed-off-by:
-
NeilBrown authored
There are some vestiges of old code that was used for bypassing the stripe cache on reads in raid5.c. This was never updated after the change from buffer_heads to bios, but was left as a reminder. That functionality has nowe been implemented in a completely different way, so the old code can go. Signed-off-by:
-
Jeff Garzik authored
The autorun code is only used if this module is built into the static kernel image. Adjust #ifdefs accordingly. Signed-off-by:
-
NeilBrown authored
stripe_to_pdidx finds the index of the parity disk for a given stripe. It assumes raid5 in that it uses "disks-1" to determine the number of data disks. This is incorrect for raid6 but fortunately the two usages cancel each other out. The only way that 'data_disks' affects the calculation of pd_idx in raid5_compute_sector is when it is divided into the sector number. But as that sector number is calculated by multiplying in the wrong value of 'data_disks' the division produces the right value. So it is innocuous but needs to be fixed. Also change the calculation of raid_disks in compute_blocknr to make it more obviously correct (it seems at first to always use disks-1 too). Signed-off-by:
-
Raz Ben-Jehuda(caro) authored
Call the chunk_aligned_read where appropriate. Signed-off-by:
-
