Skip to content

L
linux
Switch branch/tag
  1. 29 Aug, 2013 16 commits
  3. 28 Aug, 2013 1 commit
  5. 27 Aug, 2013 3 commits
    • David Herrmann's avatar
      drm: verify vma access in TTM+GEM drivers · acb46527
      David Herrmann authored 
      GEM does already a good job in tracking access to gem buffers via handles
and drm_vma access management. However, TTM drivers currently do not
verify this during mmap().

TTM provides the verify_access() callback to test this. So fix all drivers
to actually call into gem+vma to verify access instead of always returning
0.

All drivers assume that user-space can only get access to TTM buffers via
GEM handles. So whenever the verify_access() callback is called from
ttm_bo_mmap(), the buffer must have a valid embedded gem object. This is
true for all TTM+GEM drivers. But that's why this patch doesn't touch pure
TTM drivers (ie, vmwgfx).

v2: Switch to drm_vma_node_verify_access() to correctly return -EACCES if
    access was denied.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: default avatarDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      acb46527
    • David Herrmann's avatar
      drm/gem: implement vma access management · ca481c9b
      David Herrmann authored 
      We implement automatic vma mmap() access management for all drivers using
gem_mmap. We use the vma manager to add each open-file that creates a
gem-handle to the vma-node of the underlying gem object. Once the handle
is destroyed, we drop the open-file again.

This allows us to use drm_vma_node_is_allowed() on _any_ gem object to see
whether an open-file is granted access. In drm_gem_mmap() we use this to
verify that unprivileged users cannot guess gem offsets and map arbitrary
buffers.

Note that this manages access for _all_ gem users (also TTM+GEM), but the
actual access checks are only done for drm_gem_mmap(). TTM drivers use the
TTM mmap helpers, which need to do that separately.
Signed-off-by: default avatarDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      ca481c9b
    • David Herrmann's avatar
      drm/vma: add access management helpers · 88d7ebe5
      David Herrmann authored 
      The VMA offset manager uses a device-global address-space. Hence, any
user can currently map any offset-node they want. They only need to guess
the right offset. If we wanted per open-file offset spaces, we'd either
need VM_NONLINEAR mappings or multiple "struct address_space" trees. As
both doesn't really scale, we implement access management in the VMA
manager itself.

We use an rb-tree to store open-files for each VMA node. On each mmap
call, GEM, TTM or the drivers must check whether the current user is
allowed to map this file.

We add a separate lock for each node as there is no generic lock available
for the caller to protect the node easily.

As we currently don't know whether an object may be used for mmap(), we
have to do access management for all objects. If it turns out to slow down
handle creation/deletion significantly, we can optimize it in several
ways:
 - Most times only a single filp is added per bo so we could use a static
   "struct file *main_filp" which is checked/added/removed first before we
   fall back to the rbtree+drm_vma_offset_file.
   This could be even done lockless with rcu.
 - Let user-space pass a hint whether mmap() should be supported on the
   bo and avoid access-management if not.
 - .. there are probably more ideas once we have benchmarks ..

v2: add drm_vma_node_verify_access() helper
Signed-off-by: default avatarDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      88d7ebe5
  7. 24 Aug, 2013 5 commits
    • Rob Clark's avatar
      drm/msm: add basic hangcheck/recovery mechanism · bd6f82d8
      Rob Clark authored 
      A basic, no-frills recovery mechanism in case the gpu gets wedged.  We
could try to be a bit more fancy and restart the next submit after the
one that got wedged, but for now keep it simple.  This is enough to
recover things if, for example, the gpu hangs mid way through a piglit
run.
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
      bd6f82d8
    • Rob Clark's avatar
      drm/msm: add a3xx gpu support · 7198e6b0
      Rob Clark authored 
      Add initial support for a3xx 3d core.

So far, with hardware that I've seen to date, we can have:
 + zero, one, or two z180 2d cores
 + a3xx or a2xx 3d core, which share a common CP (the firmware
   for the CP seems to implement some different PM4 packet types
   but the basics of cmdstream submission are the same)

Which means that the eventual complete "class" hierarchy, once
support for all past and present hw is in place, becomes:
 + msm_gpu
   + adreno_gpu
     + a3xx_gpu
     + a2xx_gpu
   + z180_gpu

This commit splits out the parts that will eventually be common
between a2xx/a3xx into adreno_gpu, and the parts that are even
common to z180 into msm_gpu.

Note that there is no cmdstream validation required.  All memory access
from the GPU is via IOMMU/MMU.  So as long as you don't map silly things
to the GPU, there isn't much damage that the GPU can do.
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
      7198e6b0
    • Rob Clark's avatar
      drm/msm: add register definitions for gpu · 902e6eb8
      Rob Clark authored 
      Generated from rnndb files in:

https://github.com/freedreno/envytools

Keep this split out as a separate commit to make it easier to review the
actual driver.
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
      902e6eb8
    • Rob Clark's avatar
      drm/msm: basic KMS driver for snapdragon · c8afe684
      Rob Clark authored 
      The snapdragon chips have multiple different display controllers,
depending on which chip variant/version.  (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.)  And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.

To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.

The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently.  But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge.  This
would remove the 'msm_connector' base class.  But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..

This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
      c8afe684
    • Rob Clark's avatar
      drm/msm: add register definitions · 0cf6c71d
      Rob Clark authored 
      Generated from rnndb files in:

https://github.com/freedreno/envytools

Keep this split out as a separate commit to make it easier to review the
actual driver.
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
      0cf6c71d
  9. 22 Aug, 2013 1 commit
    • Dave Airlie's avatar
      Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-next · 291d284c
      Dave Airlie authored 
      Here's some gma500 unifying and cleanups for drm-next. There is more stuff in
the pipe for 3.12 but I'd like to get these out of the way first.

* 'gma500-next' of git://github.com/patjak/drm-gma500: (35 commits)
  drm/gma500/cdv: Add and hook up chip op for disabling sr
  drm/gma500/cdv: Add and hook up chip op for watermarks
  drm/gma500: Rename psb_intel_encoder to gma_encoder
  drm/gma500: Rename psb_intel_connector to gma_connector
  drm/gma500: Rename psb_intel_crtc to gma_crtc
  drm/gma500/cdv: Convert to generic set_config()
  drm/gma500/psb: Convert to generic set_config()
  drm/gma500: Add generic set_config() function
  drm/gma500/cdv: Convert to generic save/restore
  drm/gma500/psb: Convert to generic save/restore
  drm/gma500: Add generic crtc save/restore funcs
  drm/gma500: Convert to generic encoder funcs
  drm/gma500: Add generic encoder functions
  drm/gma500/psb: Convert to generic cursor funcs
  drm/gma500/cdv: Convert to generic cursor funcs
  drm/gma500: Add generic cursor functions
  drm/gma500/psb: Convert to generic crtc->destroy
  drm/gma500/mdfld: Use identical generic crtc funcs
  drm/gma500/oak: Use identical generic crtc funcs
  drm/gma500/psb: Convert to gma_crtc_dpms()
  ...
      291d284c
  11. 21 Aug, 2013 14 commits
    • Daniel Vetter's avatar
      drm/prime: Always add exported buffers to the handle cache · d0b2c533
      Daniel Vetter authored 
      ... not only when the dma-buf is freshly created. In contrived
examples someone else could have exported/imported the dma-buf already
and handed us the gem object with a flink name. If such on object gets
reexported as a dma_buf we won't have it in the handle cache already,
which breaks the guarantee that for dma-buf imports we always hand
back an existing handle if there is one.

This is exercised by igt/prime_self_import/with_one_bo_two_files

Now if we extend the locked sections just a notch more we can also
plug th racy buf/handle cache setup in handle_to_fd:

If evil userspace races a concurrent gem close against a prime export
operation we can end up tearing down the gem handle before the dma buf
handle cache is set up. When handle_to_fd gets around to adding the
handle to the cache there will be no one left to clean it up,
effectily leaking the bo (and the dma-buf, since the handle cache
holds a ref on the dma-buf):

Thread A			Thread B

handle_to_fd:

lookup gem object from handle
creates new dma_buf

				gem_close on the same handle
				obj->dma_buf is set, but file priv buf
				handle cache has no entry

				obj->handle_count drops to 0

drm_prime_add_buf_handle sets up the handle cache

-> We have a dma-buf reference in the handle cache, but since the
handle_count of the gem object already dropped to 0 no on will clean
it up. When closing the drm device fd we'll hit the WARN_ON in
drm_prime_destroy_file_private.

The important change is to extend the critical section of the
filp->prime.lock to cover the gem handle lookup. This serializes with
a concurrent gem handle close.

This leak is exercised by igt/prime_self_import/export-vs-gem_close-race
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      d0b2c533
    • Daniel Vetter's avatar
      drm/prime: make drm_prime_lookup_buf_handle static · de9564d8
      Daniel Vetter authored 
      ... and move it to the top of the function to avoid a forward
declaration.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      de9564d8
    • Daniel Vetter's avatar
      drm/prime: Simplify drm_gem_remove_prime_handles · 838cd445
      Daniel Vetter authored 
      with the reworking semantics and locking of the obj->dma_buf pointer
this pointer is always set as long as there's still a gem handle
around and a dma_buf associated with this gem object.

Also, the per file-priv lookup-cache for dma-buf importing is also
unified between foreign and native objects.

Hence we don't need to special case the clean any more and can simply
drop the clause which only runs for foreing objects, i.e. with
obj->import_attach set.

Note that with this change (actually with the previous one to always
set up obj->dma_buf even for foreign objects) it is no longer required
to set obj->import_attach when importing a foreing object. So update
comments accordingly, too.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      838cd445
    • Daniel Vetter's avatar
      drm/prime: proper locking+refcounting for obj->dma_buf link · 319c933c
      Daniel Vetter authored 
      The export dma-buf cache is semantically similar to an flink name. So
semantically it makes sense to treat it the same and remove the name
(i.e. the dma_buf pointer) and its references when the last gem handle
disappears.

Again we need to be careful, but double so: Not just could someone
race and export with a gem close ioctl (so we need to recheck
obj->handle_count again when assigning the new name), but multiple
exports can also race against each another. This is prevented by
holding the dev->object_name_lock across the entire section which
touches obj->dma_buf.

With the new scheme we also need to reinstate the obj->dma_buf link at
import time (in case the only reference userspace has held in-between
was through the dma-buf fd and not through any native gem handle). For
simplicity we don't check whether it's a native object but
unconditionally set up that link - with the new scheme of removing the
obj->dma_buf reference when the last handle disappears we can do that.

To make it clear that this is not just for exported buffers anymore
als rename it from export_dma_buf to dma_buf.

To make sure that now one can race a fd_to_handle or handle_to_fd with
gem_close we use the same tricks as in flink of extending the
dev->object_name_locking critical section. With this change we finally
have a guaranteed 1:1 relationship (at least for native objects)
between gem objects and dma-bufs, even accounting for races (which can
happen since the dma-buf itself holds a reference while in-flight).

This prevent igt/prime_self_import/export-vs-gem_close-race from
Oopsing the kernel. There is still a leak though since the per-file
priv dma-buf/handle cache handling is racy. That will be fixed in a
later patch.

v2: Remove the bogus dma_buf_put from the export_and_register_object
failure path if we've raced with the handle count dropping to 0.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      319c933c
    • Daniel Vetter's avatar
      drm/gem: completely close gem_open vs. gem_close races · 20228c44
      Daniel Vetter authored 
      The gem flink name holds a reference onto the object itself, and this
self-reference would prevent an flink'ed object from every being
freed. To break that loop we remove the flink name when the last
userspace handle disappears, i.e. when obj->handle_count reaches 0.

Now in gem_open we drop the dev->object_name_lock between the flink
name lookup and actually adding the handle. This means a concurrent
gem_close of the last handle could result in the flink name getting
reaped right inbetween, i.e.

Thread 1		Thread 2
gem_open		gem_close

flink -> obj lookup
			handle_count drops to 0
			remove flink name
create_handle
handle_count++

If someone now flinks this object again, we'll get a new flink name.

We can close this race by removing the lock dropping and making the
entire lookup+handle_create sequence atomic. Unfortunately to still be
able to share the handle_create logic this requires a
handle_create_tail function which drops the lock - we can't hold the
object_name_lock while calling into a driver's ->gem_open callback.

Note that for flink fixing this race isn't really important, since
racing gem_open against gem_close is clearly a userspace bug. And no
matter how the race ends, we won't leak any references.

But with dma-buf where the userspace dma-buf fd itself is refcounted
this is a valid sequence and hence we should fix it. Therefore this
patch here is just a warm-up exercise (and for consistency between
flink buffer sharing and dma-buf buffer sharing with self-imports).

Also note that this extension of the critical section in gem_open
protected by dev->object_name_lock only works because it's now a
mutex: A spinlock would conflict with the potential memory allocation
in idr_preload().

This is exercises by igt/gem_flink_race/flink_name.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      20228c44
    • Daniel Vetter's avatar
      drm/gem: switch dev->object_name_lock to a mutex · cd4f013f
      Daniel Vetter authored 
      I want to wrap the creation of a dma-buf from a gem object in it,
so that the obj->export_dma_buf cache can be atomically filled in.

Instead of creating a new mutex just for that variable I've figured
I can reuse the existing dev->object_name_lock, especially since
the new semantics will exactly mirror the flink obj->name already
protected by that lock.

v2: idr_preload/idr_preload_end is now an atomic section, so need to
move the mutex locking outside.

[airlied: fix up conflict with patch to make debugfs use lock]
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      cd4f013f
    • Daniel Vetter's avatar
      drm/prime: clarify logic a bit in drm_gem_prime_fd_to_handle · 84341c28
      Daniel Vetter authored 
      if (!ret) implies that ret == 0, so no need to clear it again. And
explicitly check for ret == 0 to indicate that we're checking an errno
integer.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      84341c28
    • Daniel Vetter's avatar
      drm/prime: shrink critical section protected by prime lock · bdf655de
      Daniel Vetter authored 
      When exporting a gem object as a dma-buf the critical section for the
per-fd prime lock is just the adding (and in case of errors, removing)
of the handle to the per-fd lookup cache.

So restrict the critical section to just that part of the function.

This simplifies later reordering.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      bdf655de
    • Daniel Vetter's avatar
      drm/prime: use proper pointer in drm_gem_prime_handle_to_fd · 4332bf43
      Daniel Vetter authored 
      Part of the function uses the properly-typed dmabuf variable, the
other an untyped void *buf. Kill the later.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      4332bf43
    • Daniel Vetter's avatar
      drm/gem: make drm_gem_object_handle_unreference_unlocked static · becee2a5
      Daniel Vetter authored 
      No one outside of drm should use this, the official interfaces are
drm_gem_handle_create and drm_gem_handle_delete. The handle refcounting
is purely an implementation detail of gem.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      becee2a5
    • Daniel Vetter's avatar
      drm/prime: fix error path in drm_gem_prime_fd_to_handle · 730c4ff9
      Daniel Vetter authored 
      handle_unreference only clears up the obj->name and the reference,
but would leave a dangling handle in the idr. The right thing
to do is to call handle_delete.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      730c4ff9
    • Daniel Vetter's avatar
      drm/gem: fix up flink name create race · a8e11d1c
      Daniel Vetter authored 
      This is the 2nd attempt, I've always been a bit dissatisified with the
tricky nature of the first one:

http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html

The issue is that the flink ioctl can race with calling gem_close on
the last gem handle. In that case we'll end up with a zero handle
count, but an flink name (and it's corresponding reference). Which
results in a neat space leak.

In my first attempt I've solved this by rechecking the handle count.
But fundamentally the issue is that ->handle_count isn't your usual
refcount - it can be resurrected from 0 among other things.

For those special beasts atomic_t often suggest way more ordering that
it actually guarantees. To prevent being tricked by those hairy
semantics take the easy way out and simply protect the handle with the
existing dev->object_name_lock.

With that change implemented it's dead easy to fix the flink vs. gem
close reace: When we try to create the name we simply have to check
whether there's still officially a gem handle around and if not refuse
to create the flink name. Since the handle count decrement and flink
name destruction is now also protected by that lock the reace is gone
and we can't ever leak the flink reference again.

Outside of the drm core only the exynos driver looks at the handle
count, and tbh I have no idea why (it's just for debug dmesg output
luckily).

I've considered inlining the drm_gem_object_handle_free, but I plan to
add more name-like things (like the exported dma_buf) to this scheme,
so it's clearer to leave the handle freeing in its own function.

This is exercised by the new gem_flink_race i-g-t testcase, which on
my snb leaks gem objects at a rate of roughly 1k objects/s.

v2: Fix up the error path handling in handle_create and make it more
robust by simply calling object_handle_unreference.

v3: Fix up the handle_unreference logic bug - atomic_dec_and_test
retursn 1 for 0. Oops.

v4: Squash in inlining of drm_gem_object_handle_reference as suggested
by Dave Airlie and add a note that we now have a testcase.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      a8e11d1c
    • Dave Airlie's avatar
      Merge tag 'drm-intel-next-2013-08-09' of... · 9712def2
      Dave Airlie authored 
      Merge tag 'drm-intel-next-2013-08-09' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
New pile of stuff for -next:
- Cleanup of the old crtc helper callbacks, all encoders are now converted
  to the i915 modeset infrastructure.
- Massive amount of wm patches from Ville for ilk, snb, ivb, hsw, this is
  prep work to eventually get things going for nuclear pageflips where we
  need to adjust watermarks on the fly.
- More vm/vma patches from Ben. This refactoring isn't yet fully rolled
  out, we miss the execbuf conversion and some of the low-level
  bind/unbind support code.
- Convert our hdmi infoframe code to use the new common helper functions
  (Damien). This contains some bugfixes for the common infoframe helpers.
- Some cruft removal from Damien.
- Various smaller bits&pieces all over, as usual.

* tag 'drm-intel-next-2013-08-09' of git://people.freedesktop.org/~danvet/drm-intel: (105 commits)
  drm/i915: Fix FB WM for HSW
  drm/i915: expose HDMI connectors on port C on BYT
  drm/i915: fix a limit check in hsw_compute_wm_results()
  drm/i915: unbreak i915_gem_object_ggtt_unbind()
  drm/i915: Make intel_set_mode() static
  drm/i915: Remove intel_modeset_disable()
  drm/i915: Make intel_encoder_dpms() static
  drm/i915: Make i915_hangcheck_elapsed() static
  drm/i915: Fix #endif comment
  drm/i915: Remove i915_gem_object_check_coherency()
  drm/i915: Remove stale prototypes
  drm/i915: List objects allocated from stolen memory in debugfs
  drm/i915: Always call intel_update_sprite_watermarks() when disabling a plane
  drm/i915: Pass plane and crtc to intel_update_sprite_watermarks
  drm/i915: Don't try to disable plane if it's already disabled
  drm/i915: Pass crtc to our update/disable_plane hooks
  drm/i915: Split plane watermark parameters into a separate struct
  drm/i915: Pull some watermarks state into a separate structure
  drm/i915: Calculate max watermark levels for ILK+
  drm/i915: Rename hsw_lp_wm_result to intel_wm_level
  ...
      9712def2
    • Lespiau, Damien's avatar
      drm: Make drm_get_platform_dev() static · 66cc8b6b
      Lespiau, Damien authored 
      It's only used in drm_platform.c.
Signed-off-by: default avatarDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      66cc8b6b
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7