- 19 Feb, 2009 11 commits
-
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix "mem=" handling in case of standby memory [S390] Fix timeval regression on s390 [S390] sclp: handle empty event buffers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X" ALSA: jack - Use card->shortname for input name ALSA: usb-audio - Workaround for misdetected sample rate with CM6207 ALSA: usb-audio - Fix non-continuous rate detection sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces Revert "Sound: hda - Restore PCI configuration space with interrupts off"
-
Heiko Carstens authored
Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Christian Borntraeger authored
commit aa5e97ce [PATCH] improve precision of process accounting. Introduced a timing regression: -bash-3.2# time ls real 0m0.006s user 0m1.754s sys 0m1.094s The problem was introduced by an error in cputime_to_timeval. Cputime is now 1/4096 microsecond, therefore, we have to divide the remainder with 4096 to get the microseconds. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Peter Oberparleiter authored
Handle a malformed hardware response which some versions of the Support Element (SE) may present during SE restart and which otherwise would result in an endless loop in function sclp_dispatch_evbufs. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Clemens Ladisch authored
This reverts commit 7e86c0e6 ("do not overwrite EEPROM on Xonar D2/D2X") because it did not actually help with the problem. More user reports show that the overwriting of the EEPROM is not triggered by using this driver but by installing Linux, and that the installation of any other operating system (even one without any CMI8788 driver) has the same effect. In other words, the presence of this driver does not have any effect on the occurrence of the error. (So far, the available evidence seems to point to a BIOS bug.) Furthermore, it turns out that the EEPROM chip is protected against stray write commands by the command format and by requiring a separate write-enable command, so the error scenario in the previous commit (that SPI writes can be misinterpreted as an EEPROM write command) is not even theoretically possible. The mixer control that was removed as a consequence of the previous commit can only be partially emulated in userspace, which also means it cannot be seen be the in-kernel OSS API emulation, so it is better to revert that change. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list block: fix booting from partitioned md array block: revert part of 18ce3751 cciss: PCI power management reset for kexec paride/pg.c: xs(): &&/|| confusion fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free block: fix bad definition of BIO_RW_SYNC bsg: Fix sense buffer bug in SG_IO
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: omap_hsmmc: Change while(); loops with finite version omap_hsmmc: recover from transfer failures omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V omap_hsmmc: card detect irq bugfix sdhci: fix led naming mmc_test: fix basic read test s3cmci: Fix hangup in do_pio_write() Revert "sdhci: force high speed capability on some controllers" MMC: fix bug - SDHC card capacity not correct
-
- 18 Feb, 2009 29 commits
-
-
Ingo Molnar authored
Enhanced lockdep coverage of __GFP_NOFS turned up this new lockdep assert: [ 1093.677775] [ 1093.677781] ================================= [ 1093.680031] [ INFO: inconsistent lock state ] [ 1093.680031] 2.6.29-rc5-tip-01504-gb49eca1-dirty #1 [ 1093.680031] --------------------------------- [ 1093.680031] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [ 1093.680031] kswapd0/308 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 1093.680031] (&inode->inotify_mutex){+.+.?.}, at: [<c0205942>] inotify_inode_is_dead+0x20/0x80 [ 1093.680031] {RECLAIM_FS-ON-W} state was registered at: [ 1093.680031] [<c01696b9>] mark_held_locks+0x43/0x5b [ 1093.680031] [<c016baa4>] lockdep_trace_alloc+0x6c/0x6e [ 1093.680031] [<c01cf8b0>] kmem_cache_alloc+0x20/0x150 [ 1093.680031] [<c040d0ec>] idr_pre_get+0x27/0x6c [ 1093.680031] [<c02056e3>] inotify_handle_get_wd+0x25/0xad [ 1093.680031] [<c0205f43>] inotify_add_watch+0x7a/0x129 [ 1093.680031] [<c020679e>] sys_inotify_add_watch+0x20f/0x250 [ 1093.680031] [<c010389e>] sysenter_do_call+0x12/0x35 [ 1093.680031] [<ffffffff>] 0xffffffff [ 1093.680031] irq event stamp: 60417 [ 1093.680031] hardirqs last enabled at (60417): [<c018d5f5>] call_rcu+0x53/0x59 [ 1093.680031] hardirqs last disabled at (60416): [<c018d5b9>] call_rcu+0x17/0x59 [ 1093.680031] softirqs last enabled at (59656): [<c0146229>] __do_softirq+0x157/0x16b [ 1093.680031] softirqs last disabled at (59651): [<c0106293>] do_softirq+0x74/0x15d [ 1093.680031] [ 1093.680031] other info that might help us debug this: [ 1093.680031] 2 locks held by kswapd0/308: [ 1093.680031] #0: (shrinker_rwsem){++++..}, at: [<c01b0502>] shrink_slab+0x36/0x189 [ 1093.680031] #1: (&type->s_umount_key#4){+++++.}, at: [<c01e6d77>] shrink_dcache_memory+0x110/0x1fb [ 1093.680031] [ 1093.680031] stack backtrace: [ 1093.680031] Pid: 308, comm: kswapd0 Not tainted 2.6.29-rc5-tip-01504-gb49eca1-dirty #1 [ 1093.680031] Call Trace: [ 1093.680031] [<c016947a>] valid_state+0x12a/0x13d [ 1093.680031] [<c016954e>] mark_lock+0xc1/0x1e9 [ 1093.680031] [<c016a5b4>] ? check_usage_forwards+0x0/0x3f [ 1093.680031] [<c016ab74>] __lock_acquire+0x2c6/0xac8 [ 1093.680031] [<c01688d9>] ? register_lock_class+0x17/0x228 [ 1093.680031] [<c016b3d3>] lock_acquire+0x5d/0x7a [ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c08824c4>] __mutex_lock_common+0x3a/0x4cb [ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c08829ed>] mutex_lock_nested+0x2e/0x36 [ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c0205942>] inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [<c01e6672>] dentry_iput+0x90/0xc2 [ 1093.680031] [<c01e67a3>] d_kill+0x21/0x45 [ 1093.680031] [<c01e6a46>] __shrink_dcache_sb+0x27f/0x355 [ 1093.680031] [<c01e6dc5>] shrink_dcache_memory+0x15e/0x1fb [ 1093.680031] [<c01b05ed>] shrink_slab+0x121/0x189 [ 1093.680031] [<c01b0d12>] kswapd+0x39f/0x561 [ 1093.680031] [<c01ae499>] ? isolate_pages_global+0x0/0x233 [ 1093.680031] [<c0157eae>] ? autoremove_wake_function+0x0/0x43 [ 1093.680031] [<c01b0973>] ? kswapd+0x0/0x561 [ 1093.680031] [<c0157daf>] kthread+0x41/0x82 [ 1093.680031] [<c0157d6e>] ? kthread+0x0/0x82 [ 1093.680031] [<c01043ab>] kernel_thread_helper+0x7/0x10 inotify_handle_get_wd() does idr_pre_get() which does a kmem_cache_alloc() without __GFP_FS - and is hence deadlockable under extreme MM pressure. Signed-off-by:Ingo Molnar <mingo@elte.hu> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: MinChan Kim <minchan.kim@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Buesch authored
gpio_get_value() returns 0 or nonzero, but getmiso() expects 0 or 1. Sanitize the value to a 0/1 boolean. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Bernhard Walle authored
Since I don't work for SUSE any more and the bwalle@suse.de address is invalid, correct it in the copyright headers and documentation. Signed-off-by:
Bernhard Walle <bernhard.walle@gmx.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Randy Dunlap authored
Build breaks when DELL_LAPTOP=y and POWER_SUPPLY=m. DELL_LAPTOP needs to depend on POWER_SUPPLY. dell-laptop.c:(.text+0x1ef3c4): undefined reference to `power_supply_is_system_supplied' dell-laptop.c:(.text+0x1ef45e): undefined reference to `power_supply_is_system_supplied' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
-
Bill Nottingham authored
Otherwise, these don't work when called from 32-bit userspace on 64-bit kernels. Cc: Jiri Kosina <jkosina@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by:
-
Krzysztof Helt authored
Submenus of the graphics support "Support for frame buffer devices" and "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" are broken in half after latest changes for Intel 915 mode setting support. The DRM subsection is broken because one option is put outside the choice section it depends on. The frame buffers part is broken then due to circular dependency. Fix this by make Intel frame buffers depend on CONFIG_INTEL_AGP. Kconfigs are broken by d2f59357 ("drm/i915: select framebuffer support automatically"). This is probably not only way to fix this. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Philippe De Muyter authored
The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162Signed-off-by:Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Reported-by:
-
Adam Lackorzynski authored
I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by:
Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Now, early_pfn_in_nid(PFN, NID) may returns false if PFN is a hole. and memmap initialization was not done. This was a trouble for sparc boot. To fix this, the PFN should be initialized and marked as PG_reserved. This patch changes early_pfn_in_nid() return true if PFN is a hole. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reported-by:
David Miller <davem@davemlloft.net> Tested-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
What's happening is that the assertion in mm/page_alloc.c:move_freepages() is triggering: BUG_ON(page_zone(start_page) != page_zone(end_page)); Once I knew this is what was happening, I added some annotations: if (unlikely(page_zone(start_page) != page_zone(end_page))) { printk(KERN_ERR "move_freepages: Bogus zones: " "start_page[%p] end_page[%p] zone[%p]\n", start_page, end_page, zone); printk(KERN_ERR "move_freepages: " "start_zone[%p] end_zone[%p]\n", page_zone(start_page), page_zone(end_page)); printk(KERN_ERR "move_freepages: " "start_pfn[0x%lx] end_pfn[0x%lx]\n", page_to_pfn(start_page), page_to_pfn(end_page)); printk(KERN_ERR "move_freepages: " "start_nid[%d] end_nid[%d]\n", page_to_nid(start_page), page_to_nid(end_page)); ... And here's what I got: move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00] move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00] move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff] move_freepages: start_nid[1] end_nid[0] My memory layout on this box is: [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x0081ff5d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00020000 [ 0.000000] 1: 0x00800000 -> 0x0081f7ff [ 0.000000] 1: 0x0081f800 -> 0x0081fe50 [ 0.000000] 1: 0x0081fed1 -> 0x0081fed8 [ 0.000000] 1: 0x0081feda -> 0x0081fedb [ 0.000000] 1: 0x0081fedd -> 0x0081fee5 [ 0.000000] 1: 0x0081fee7 -> 0x0081ff51 [ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d So it's a block move in that 0x81f600-->0x81f7ff region which triggers the problem. This patch: Declaration of early_pfn_to_nid() is scattered over per-arch include files, and it seems it's complicated to know when the declaration is used. I think it makes fix-for-memmap-init not easy. This patch moves all declaration to include/linux/mm.h After this, if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use static definition in include/linux/mm.h else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use generic definition in mm/page_alloc.c else -> per-arch back end function will be called. Signed-off-by: -
Peter Zijlstra authored
Li Zefan said: Thread 1: for ((; ;)) { mount -t cpuset xxx /mnt > /dev/null 2>&1 cat /mnt/cpus > /dev/null 2>&1 umount /mnt > /dev/null 2>&1 } Thread 2: for ((; ;)) { mount -t cpuset xxx /mnt > /dev/null 2>&1 umount /mnt > /dev/null 2>&1 } (Note: It is irrelevant which cgroup subsys is used.) After a while a lockdep warning showed up: ============================================= [ INFO: possible recursive locking detected ] 2.6.28 #479 --------------------------------------------- mount/13554 is trying to acquire lock: (&type->s_umount_key#19){--..}, at: [<c049d888>] sget+0x5e/0x321 but task is already holding lock: (&type->s_umount_key#19){--..}, at: [<c049da0c>] sget+0x1e2/0x321 other info that might help us debug this: 1 lock held by mount/13554: #0: (&type->s_umount_key#19){--..}, at: [<c049da0c>] sget+0x1e2/0x321 stack backtrace: Pid: 13554, comm: mount Not tainted 2.6.28-mc #479 Call Trace: [<c044ad2e>] validate_chain+0x4c6/0xbbd [<c044ba9b>] __lock_acquire+0x676/0x700 [<c044bb82>] lock_acquire+0x5d/0x7a [<c049d888>] ? sget+0x5e/0x321 [<c061b9b8>] down_write+0x34/0x50 [<c049d888>] ? sget+0x5e/0x321 [<c049d888>] sget+0x5e/0x321 [<c045a2e7>] ? cgroup_set_super+0x0/0x3e [<c045959f>] ? cgroup_test_super+0x0/0x2f [<c045bcea>] cgroup_get_sb+0x98/0x2e7 [<c045cfb6>] cpuset_get_sb+0x4a/0x5f [<c049dfa4>] vfs_kern_mount+0x40/0x7b [<c049e02d>] do_kern_mount+0x37/0xbf [<c04af4a0>] do_mount+0x5c3/0x61a [<c04addd2>] ? copy_mount_options+0x2c/0x111 [<c04af560>] sys_mount+0x69/0xa0 [<c0403251>] sysenter_do_call+0x12/0x31 The cause is after alloc_super() and then retry, an old entry in list fs_supers is found, so grab_super(old) is called, but both functions hold s_umount lock: struct super_block *sget(...) { ... retry: spin_lock(&sb_lock); if (test) { list_for_each_entry(old, &type->fs_supers, s_instances) { if (!test(old, data)) continue; if (!grab_super(old)) <--- 2nd: down_write(&old->s_umount); goto retry; if (s) destroy_super(s); return old; } } if (!s) { spin_unlock(&sb_lock); s = alloc_super(type); <--- 1th: down_write(&s->s_umount) if (!s) return ERR_PTR(-ENOMEM); goto retry; } ... } It seems like a false positive, and seems like VFS but not cgroup needs to be fixed. Peter said: We can simply put the new s_umount instance in a but lockdep doesn't particularly cares about subclass order. If there's any issue with the callers of sget() assuming the s_umount lock being of sublcass 0, then there is another annotation we can use to fix that, but lets not bother with that if this is sufficient. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12673Signed-off-by:Li Zefan <lizf@cn.fujitsu.com> Reported-by:
-
Atsushi Nemoto authored
I found a problem of handling of modem status of atmel_serial driver. With the commit 1ecc26 ("atmel_serial: split the interrupt handler"), handling of modem status signal was splitted into two parts. The atmel_tasklet_func() compares new status with irq_status_prev, but irq_status_prev is not correct if signal status was changed while the port is closed. Here is a sequence to cause problem: 1. Remote side sets CTS (and DSR). 2. Local side close the port. 3. Local side clears RTS and DTR. 4. Remote side clears CTS and DSR. 5. Local side reopen the port. hw_stopped becomes 1. 6. Local side sets RTS and DTR. 7. Remote side sets CTS and DSR. Then CTS change interrupt can be received, but since CTS bit in irq_status_prev and new status is same, uart_handle_cts_change() will not be called (so hw_stopped will not be cleared, i.e. cannot send any data). I suppose irq_status_prev should be initialized at somewhere in open sequence. Itai Levi pointed out that we need to initialize atmel_port->irq_status as well here. His analysis is as follows: > Regarding the second part of the patch (which resets irq_status_prev), > it turns out that both versions of the patch (mine and Atsushi's) > still leave enough room for faulty behavior when opening the port. > > This is because we are not resetting both irq_status_prev and > irq_status in atmel_startup() to CSR, which leads faulty behavior in > the following sequences: > > First case: > 1. closing the port while CTS line = 1 (TX not allowed) > 2. setting CTS line = 0 (TX allowed) > 3. opening the port > 4. transmitting one char > 5. Cannot transmit more chars, although CTS line is 0 > > Second case: > 1. closing the port while CTS line = 0 (TX allowed) > 2. setting CTS line = 1 (TX not allowed) > 3. opening the port > 4. receiving some chars > 5. Now we can transmit, although CTS line is 1 > > This reason for this is that the tasklet is scheduled as a result of > TX or RX interrupts (not a status change!), in steps 4 above. Inside > the tasklet, the atmel_port->irq_status (which holds the value from > the previous session) is compared to atmel_port->irq_status_prev. > Hence, a status-change of the CTS line is faultily detected. > > Both cases were verified on 9260 hardware. [haavard.skinnemoen@atmel.com: folded with patch from Itai Levi] Signed-off-by:Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Remy Bohmer <linux@bohmer.net> Cc: Marc Pignat <marc.pignat@hevs.ch> Cc: Itai Levi <itai.levi.devel@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Dan Williams authored
The conversion of atmel-mci to dma_request_channel missed the initialization of the channel dma_slave information. The filter_fn passed to dma_request_channel is responsible for initializing the channel's private data. This implementation has the additional benefit of enabling a generic client-channel data passing mechanism. Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
Giuseppe Bilotta authored
Add support for HP Pavilion dv5. Since Intel-based models have an inverted x axis, while AMD-based models have an inverted y axis, we introduce a new macro that special-cases axis orientation based on two DMI entries: HP dv5 axis configuration is then based on both the PRODUCT and BOARD name. Signed-off-by:
Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Tested-by:
Palatis Tseng <palatis@gmail.com> Signed-off-by:
-
Giuseppe Bilotta authored
Sensors responding with 0x3B to WHO_AM_I only have one data register per direction, thus returning a signed byte from the position which is occupied by the MSB in sensors responding with 0x3A. Since multiple sensors share the reply to WHO_AM_I, we rename the defines to better indicate what they identify (family of single and double precision sensors). We support both kind of sensors by checking for the sensor type on init and defining appropriate data-access routines and sensor limits (for the joystick) depending on what we find. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Eric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Pavel Machek authored
This adds freefall handling to hp_accel driver. According to HP, it should just work, without us having to set the chip up by hand. hpfall.c is example .c program that parks the disk when accelerometer detects free fall. It should work; for now, it uses fixed 20seconds protection period. Signed-off-by:
Pavel Machek <pavel@suse.cz> Cc: Thomas Renninger <trenn@suse.de> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
-
Alexey Dobriyan authored
Otherwise with INPUT=m, EEEPC_LAPTOP=y one gets drivers/built-in.o: In function `input_sync': eeepc-laptop.c:(.text+0x18ce51): undefined reference to `input_event' drivers/built-in.o: In function `input_report_key': eeepc-laptop.c:(.text+0x18ce73): undefined reference to `input_event' drivers/built-in.o: In function `eeepc_hotk_check': eeepc-laptop.c:(.text+0x18d05f): undefined reference to `input_allocate_device' eeepc-laptop.c:(.text+0x18d10f): undefined reference to `input_register_device' eeepc-laptop.c:(.text+0x18d131): undefined reference to `input_free_device' drivers/built-in.o: In function `eeepc_backlight_exit': eeepc-laptop.c:(.text+0x18d546): undefined reference to `input_unregister_device' Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Rafael J. Wysocki authored
Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken config dependncies. Fix that. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: Len Brown <lenb@kernel.org> Acked-by:
-
Li Zefan authored
In cgroup_kill_sb(), root is freed before sb is detached from the list, so another sget() may find this sb and call cgroup_test_super(), which will access the root that has been freed. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Paul Menage <menage@google.com> Signed-off-by:
-
Nick Piggin authored
YAMAMOTO-san noticed that task_dirty_inc doesn't seem to be called properly for cases where set_page_dirty is not used to dirty a page (eg. mark_buffer_dirty). Additionally, there is some inconsistency about when task_dirty_inc is called. It is used for dirty balancing, however it even gets called for __set_page_dirty_no_writeback. So rather than increment it in a set_page_dirty wrapper, move it down to exactly where the dirty page accounting stats are incremented. Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by:
Nick Piggin <npiggin@suse.de> Acked-by:
-
Davide Libenzi authored
As requested by Michael, add a missing check for valid flags in timerfd_settime(), and make it return EINVAL in case some extra bits are set. Michael said: If this is to be any use to userland apps that want to check flag support (perhaps it is too late already), then the sooner we get it into the kernel the better: 2.6.29 would be good; earlier stables as well would be even better. [akpm@linux-foundation.org: remove unused TFD_FLAGS_SET] Acked-by:
Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> [2.6.27.x, 2.6.28.x] Signed-off-by:
-
Pavel Machek authored
My @suse.cz address will stop working some day, so put working one into MAINTAINERS/CREDITS. It would be cool to get this to 2.6.29... it should not really break anything. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Eric Biederman authored
Currently seq_read assumes that the offset passed to it is always the offset it passed to user space. In the case pread this assumption is broken and we do the wrong thing when presented with pread. To solve this I introduce an offset cache inside of struct seq_file so we know where our logical file position is. Then in seq_read if we try to read from another offset we reset our data structures and attempt to go to the offset user space wanted. [akpm@linux-foundation.org: restore FMODE_PWRITE] [pjt@google.com: seq_open needs its fmode opened up to take advantage of this] Signed-off-by:
Eric Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Paul Turner <pjt@google.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by:
-
Paul Turner authored
Separate FMODE_PREAD and FMODE_PWRITE into separate flags to reflect the reality that the read and write paths may have independent restrictions. A git grep verifies that these flags are always cleared together so this new behavior will only apply to interfaces that change to clear flags individually. This is required for "seq_file: properly cope with pread", a post-2.6.25 regression fix. [akpm@linux-foundation.org: add comment] Signed-off-by:
Paul Turner <pjt@google.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by:
-
Li Zefan authored
The css_set hash table was introduced in 2.6.26, so update the documentation accordingly. Signed-off-by:
-
Ed Cashin authored
The Welland ME-747K-SI AoE target generates unsolicited AoE responses that are marked as vendor extensions. Instead of ignoring these packets, the aoe driver was generating kernel messages for each unrecognized response received. This patch corrects the behavior. Signed-off-by:
Ed Cashin <ecashin@coraid.com> Reported-by: <karaluh@karaluh.pl> Tested-by: <karaluh@karaluh.pl> Cc: <stable@kernel.org> Cc: Alex Buell <alex.buell@munted.org.uk> Signed-off-by:
-
Benjamin Herrenschmidt authored
We have get_vm_area_caller() and __get_vm_area() but not __get_vm_area_caller() On powerpc, I use __get_vm_area() to separate the ranges of addresses given to vmalloc vs. ioremap (various good reasons for that) so in order to be able to implement the new caller tracking in /proc/vmallocinfo, I need a "_caller" variant of it. (akpm: needed for ongoing powerpc development, so merge it early) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
-
Jean Pihet authored
Replace the infinite 'while() ;' loops with a finite loop version. Signed-off-by:
Jean Pihet <jpihet@mvista.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx>
-
Jean Pihet authored
Timeouts during a command that has a data phase can result in the next command issued after the command that failed not being processed, i.e. no interrupt ever occurs to indicate the command has completed. This failure can result in a deadlock. This patch resets the data state machine to clear the error in case of a command timeout. Tested on OMAP3430 chip and intensive MMC/SD device removal while transferring data. Signed-off-by:
Andy Lowe <alowe@mvista.com> Signed-off-by:
Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by:
-
