- 16 Aug, 2017 7 commits
-
-
Jan Kara authored
commit ea7bd56f upstream. The bio describing discard operation is allocated by __blkdev_issue_discard() which returns us a reference to it. That reference is never released and thus we leak this bio. Drop the bio reference once it completes in xlog_discard_endio(). Fixes: 4560e78fSigned-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Max Filippov authored
commit 7f81e55c upstream. csum_partial and csum_partial_copy_generic are defined unconditionally and are available even when CONFIG_NET is disabled. They are used not only by the network drivers, but also by scsi and media. Don't limit these functions export by CONFIG_NET. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
commit bc652eb6 upstream. Functions clear_user_highpage, copy_user_highpage, flush_dcache_page, local_flush_cache_range and local_flush_cache_page may be used from modules. Export them. Signed-off-by:
-
Max Filippov authored
commit 6d0f581d upstream. Currently building kernel for xtensa core with aliasing WT cache fails with the following messages: mm/memory.c:2152: undefined reference to `flush_dcache_page' mm/memory.c:2332: undefined reference to `local_flush_cache_page' mm/memory.c:1919: undefined reference to `local_flush_cache_range' mm/memory.c:4179: undefined reference to `copy_to_user_page' mm/memory.c:4183: undefined reference to `copy_from_user_page' This happens because implementation of these functions is only compiled when data cache is WB, which looks wrong: even when data cache doesn't need flushing it still needs invalidation. The functions like __flush_[invalidate_]dcache_* are correctly defined for both WB and WT caches (and even if they weren't that'd still be ok, just slower). Fix this by providing the same implementation of the above functions for both WB and WT cache. Signed-off-by:
-
Mel Gorman authored
commit 48fb6f4d upstream. Commit 65d8fc77 ("futex: Remove requirement for lock_page() in get_futex_key()") removed an unnecessary lock_page() with the side-effect that page->mapping needed to be treated very carefully. Two defensive warnings were added in case any assumption was missed and the first warning assumed a correct application would not alter a mapping backing a futex key. Since merging, it has not triggered for any unexpected case but Mark Rutland reported the following bug triggering due to the first warning. kernel BUG at kernel/futex.c:679! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3 Hardware name: linux,dummy-virt (DT) task: ffff80001e271780 task.stack: ffff000010908000 PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145 The fact that it's a bug instead of a warning was due to an unrelated arm64 problem, but the warning itself triggered because the underlying mapping changed. This is an application issue but from a kernel perspective it's a recoverable situation and the warning is unnecessary so this patch removes the warning. The warning may potentially be triggered with the following test program from Mark although it may be necessary to adjust NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the system. #include <linux/futex.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/time.h> #include <unistd.h> #define NR_FUTEX_THREADS 16 pthread_t threads[NR_FUTEX_THREADS]; void *mem; #define MEM_PROT (PROT_READ | PROT_WRITE) #define MEM_SIZE 65536 static int futex_wrapper(int *uaddr, int op, int val, const struct timespec *timeout, int *uaddr2, int val3) { syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3); } void *poll_futex(void *unused) { for (;;) { futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1); } } int main(int argc, char *argv[]) { int i; mem = mmap(NULL, MEM_SIZE, MEM_PROT, MAP_SHARED | MAP_ANONYMOUS, -1, 0); printf("Mapping @ %p\n", mem); printf("Creating futex threads...\n"); for (i = 0; i < NR_FUTEX_THREADS; i++) pthread_create(&threads[i], NULL, poll_futex, NULL); printf("Flipping mapping...\n"); for (;;) { mmap(mem, MEM_SIZE, MEM_PROT, MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0); } return 0; } Reported-and-tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Cong Wang authored
commit d041353d upstream. We saw many list corruption warnings on shmem shrinklist: WARNING: CPU: 18 PID: 177 at lib/list_debug.c:59 __list_del_entry+0x9e/0xc0 list_del corruption. prev->next should be ffff9ae5694b82d8, but was ffff9ae5699ba960 Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt CPU: 18 PID: 177 Comm: kswapd1 Not tainted 4.9.34-t3.el7.twitter.x86_64 #1 Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013 Call Trace: dump_stack+0x4d/0x66 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 __list_del_entry+0x9e/0xc0 shmem_unused_huge_shrink+0xfa/0x2e0 shmem_unused_huge_scan+0x20/0x30 super_cache_scan+0x193/0x1a0 shrink_slab.part.41+0x1e3/0x3f0 shrink_slab+0x29/0x30 shrink_node+0xf9/0x2f0 kswapd+0x2d8/0x6c0 kthread+0xd7/0xf0 ret_from_fork+0x22/0x30 WARNING: CPU: 23 PID: 639 at lib/list_debug.c:33 __list_add+0x89/0xb0 list_add corruption. prev->next should be next (ffff9ae5699ba960), but was ffff9ae5694b82d8. (prev=ffff9ae5694b82d8). Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt CPU: 23 PID: 639 Comm: systemd-udevd Tainted: G W 4.9.34-t3.el7.twitter.x86_64 #1 Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013 Call Trace: dump_stack+0x4d/0x66 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 __list_add+0x89/0xb0 shmem_setattr+0x204/0x230 notify_change+0x2ef/0x440 do_truncate+0x5d/0x90 path_openat+0x331/0x1190 do_filp_open+0x7e/0xe0 do_sys_open+0x123/0x200 SyS_open+0x1e/0x20 do_syscall_64+0x61/0x170 entry_SYSCALL64_slow_path+0x25/0x25 The problem is that shmem_unused_huge_shrink() moves entries from the global sbinfo->shrinklist to its local lists and then releases the spinlock. However, a parallel shmem_setattr() could access one of these entries directly and add it back to the global shrinklist if it is removed, with the spinlock held. The logic itself looks solid since an entry could be either in a local list or the global list, otherwise it is removed from one of them by list_del_init(). So probably the race condition is that, one CPU is in the middle of INIT_LIST_HEAD() but the other CPU calls list_empty() which returns true too early then the following list_add_tail() sees a corrupted entry. list_empty_careful() is designed to fix this situation. [akpm@linux-foundation.org: add comments] Link: http://lkml.kernel.org/r/20170803054630.18775-1-xiyou.wangcong@gmail.com Fixes: 779750d2 ("shmem: split huge pages beyond i_size under memory pressure") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jonathan Toppins authored
commit 75dddef3 upstream. The RDMA subsystem can generate several thousand of these messages per second eventually leading to a kernel crash. Ratelimit these messages to prevent this crash. Doug said: "I've been carrying a version of this for several kernel versions. I don't remember when they started, but we have one (and only one) class of machines: Dell PE R730xd, that generate these errors. When it happens, without a rate limit, we get rcu timeouts and kernel oopses. With the rate limit, we just get a lot of annoying kernel messages but the machine continues on, recovers, and eventually the memory operations all succeed" And: "> Well... why are all these EBUSY's occurring? It sounds inefficient > (at least) but if it is expected, normal and unavoidable then > perhaps we should just remove that message altogether? I don't have an answer to that question. To be honest, I haven't looked real hard. We never had this at all, then it started out of the blue, but only on our Dell 730xd machines (and it hits all of them), but no other classes or brands of machines. And we have our 730xd machines loaded up with different brands and models of cards (for instance one dedicated to mlx4 hardware, one for qib, one for mlx5, an ocrdma/cxgb4 combo, etc), so the fact that it hit all of the machines meant it wasn't tied to any particular brand/model of RDMA hardware. To me, it always smelled of a hardware oddity specific to maybe the CPUs or mainboard chipsets in these machines, so given that I'm not an mm expert anyway, I never chased it down. A few other relevant details: it showed up somewhere around 4.8/4.9 or thereabouts. It never happened before, but the prinkt has been there since the 3.18 days, so possibly the test to trigger this message was changed, or something else in the allocator changed such that the situation started happening on these machines? And, like I said, it is specific to our 730xd machines (but they are all identical, so that could mean it's something like their specific ram configuration is causing the allocator to hit this on these machine but not on other machines in the cluster, I don't want to say it's necessarily the model of chipset or CPU, there are other bits of identicalness between these machines)" Link: http://lkml.kernel.org/r/499c0f6cc10d6eb829a67f2a4d75b4228a9b356e.1501695897.git.jtoppins@redhat.comSigned-off-by:
Jonathan Toppins <jtoppins@redhat.com> Reviewed-by:
Doug Ledford <dledford@redhat.com> Tested-by:
-
- 13 Aug, 2017 18 commits
-
-
Greg Kroah-Hartman authored
-
Qu Wenruo authored
commit 848c23b7 upstream. Commit 4751832d ("btrfs: fiemap: Cache and merge fiemap extent before submit it to user") introduced a warning to catch unemitted cached fiemap extent. However such warning doesn't take the following case into consideration: 0 4K 8K |<---- fiemap range --->| |<----------- On-disk extent ------------------>| In this case, the whole 0~8K is cached, and since it's larger than fiemap range, it break the fiemap extent emit loop. This leaves the fiemap extent cached but not emitted, and caught by the final fiemap extent sanity check, causing kernel warning. This patch removes the kernel warning and renames the sanity check to emit_last_fiemap_cache() since it's possible and valid to have cached fiemap extent. Reported-by:
David Sterba <dsterba@suse.cz> Reported-by:
Adam Borowski <kilobyte@angband.pl> Fixes: 4751832d ("btrfs: fiemap: Cache and merge fiemap extent ...") Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
David Sterba <dsterba@suse.com> Cc: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
-
Johannes Thumshirn authored
commit f930c704 upstream. Don't make any assumptions on the sg_io_hdr_t::dxfer_direction or the sg_io_hdr_t::dxferp in order to determine if it is a valid request. The only way we can check for bad requests is by checking if the length exceeds 256M. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Fixes: 28676d86 (scsi: sg: check for valid direction before starting the request) Reported-by:
Jason L Tibbitts III <tibbs@math.uh.edu> Tested-by:
Doug Gilbert <dgilbert@interlog.com> Cc: Doug Gilbert <dgilbert@interlog.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit c27927e3 ] Updates to tp_reserve can race with reads of the field in packet_set_ring. Avoid this by holding the socket lock during updates in setsockopt PACKET_RESERVE. This bug was discovered by syzkaller. Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 85f1bd9a ] When iteratively building a UDP datagram with MSG_MORE and that datagram exceeds MTU, consistently choose UFO or fragmentation. Once skb_is_gso, always apply ufo. Conversely, once a datagram is split across multiple skbs, do not consider ufo. Sendpage already maintains the first invariant, only add the second. IPv6 does not have a sendpage implementation to modify. A gso skb must have a partial checksum, do not follow sk_no_check_tx in udp_send_skb. Found by syzkaller. Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach") Reported-by:
-
Nikolay Borisov authored
[ Upstream commit 1714020e ] Commit dcd87999 ("igmp: net: Move igmp namespace init to correct file") moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This function is only called as part of per-namespace initialization, only if CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is compiled out, casuing the igmp pernet ops to not be registerd and those sysctl being left initialized with 0. However, there are certain functions, such as ip_mc_join_group which are always compiled and make use of some of those sysctls. Let's do a partial revert of the aforementioned commit and move the sysctl initialization into inet_init_net, that way they will always have sane values. Fixes: dcd87999 ("igmp: net: Move igmp namespace init to correct file") Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595Reported-by:
Gerardo Exequiel Pozzi <vmlinuz386@gmail.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 8d63bee6 ] skb_warn_bad_offload triggers a warning when an skb enters the GSO stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL checksum offload set. Commit b2504a5d ("net: reduce skb_warn_bad_offload() noise") observed that SKB_GSO_DODGY producers can trigger the check and that passing those packets through the GSO handlers will fix it up. But, the software UFO handler will set ip_summed to CHECKSUM_NONE. When __skb_gso_segment is called from the receive path, this triggers the warning again. Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On Tx these two are equivalent. On Rx, this better matches the skb state (checksum computed), as CHECKSUM_NONE here means no checksum computed. See also this thread for context: http://patchwork.ozlabs.org/patch/799015/ Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise") Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit bbae08e5 ] qmi_wwan_disconnect is called twice when disconnecting devices with separate control and data interfaces. The first invocation will set the interface data to NULL for both interfaces to flag that the disconnect has been handled. But the matching NULL check was left out when qmi_wwan_disconnect was added, resulting in this oops: usb 2-1.4: USB disconnect, device number 4 qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: <stripped irrelevant module list> CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G E 4.12.3-nr44-normandy-r1500619820+ #1 Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017 Workqueue: usb_hub_wq hub_event [usbcore] task: ffff8c882b716040 task.stack: ffffb8e800d84000 RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400 RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8 R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0 Call Trace: ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan] ? usbnet_disconnect+0x6c/0xf0 [usbnet] ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan] ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 Reported-and-tested-by:
Nathaniel Roach <nroach44@gmail.com> Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8ba60924 ] With new TCP_FASTOPEN_CONNECT socket option, there is a possibility to call tcp_connect() while socket sk_dst_cache is either NULL or invalid. +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(4, ..., ...) = 0 << sk->sk_dst_cache becomes obsolete, or even set to NULL >> +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000 We need to refresh the route otherwise bad things can happen, especially when syzkaller is running on the host :/ Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 96d97030 ] Commit 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat") introduced a member nft_compat to xt_tgchk_param structure. But it didn't set it's value for ipt_init_target. With unexpected value in par.nft_compat, it may return unexpected result in some target's checkentry. This patch is to set all it's fields as 0 and only initialize the non-zero fields in ipt_init_target. v1->v2: As Wang Cong's suggestion, fix it by setting all it's fields as 0 and only initializing the non-zero fields. Fixes: 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat") Suggested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit ec0acb09 ] Now xt_tgchk_param par in ipt_init_target is a local varibale, par.net is not initialized there. Later when xt_check_target calls target's checkentry in which it may access par.net, it would cause kernel panic. Jaroslav found this panic when running: # ip link add TestIface type dummy # tc qd add dev TestIface ingress handle ffff: # tc filter add dev TestIface parent ffff: u32 match u32 0 0 \ action xt -j CONNMARK --set-mark 4 This patch is to pass net param into ipt_init_target and set par.net with it properly in there. v1->v2: As Wang Cong pointed, I missed ipt_net_id != xt_net_id, so fix it by also passing net_id to __tcf_ipt_init. v2->v3: Missed the fixes tag, so add it. Fixes: ecb2421b ("netfilter: add and use nf_ct_netns_get/put") Reported-by:
Jaroslav Aster <jaster@redhat.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit e718fe45 ] if the NIC fails to validate the checksum on TCP/UDP, and validation of IP checksum is successful, the driver subtracts the pseudo-header checksum from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails. V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set Reported-by:
Shuang Li <shuali@redhat.com> Fixes: f8c6455b ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit b0a0c256 ] While testing some other work that required JIT modifications, I run into test_bpf causing a hang when JIT enabled on s390. The problematic test case was the one from ddc665a4 (bpf, arm64: fix jit branch offset related to ldimm64), and turns out that we do have a similar issue on s390 as well. In bpf_jit_prog() we update next instruction address after returning from bpf_jit_insn() with an insn_count. bpf_jit_insn() returns either -1 in case of error (e.g. unsupported insn), 1 or 2. The latter is only the case for ldimm64 due to spanning 2 insns, however, next address is only set to i + 1 not taking actual insn_count into account, thus fix is to use insn_count instead of 1. bpf_jit_enable in mode 2 provides also disasm on s390: Before fix: 000003ff800349b6: a7f40003 brc 15,3ff800349bc ; target 000003ff800349ba: 0000 unknown 000003ff800349bc: e3b0f0700024 stg %r11,112(%r15) 000003ff800349c2: e3e0f0880024 stg %r14,136(%r15) 000003ff800349c8: 0db0 basr %r11,%r0 000003ff800349ca: c0ef00000000 llilf %r14,0 000003ff800349d0: e320b0360004 lg %r2,54(%r11) 000003ff800349d6: e330b03e0004 lg %r3,62(%r11) 000003ff800349dc: ec23ffeda065 clgrj %r2,%r3,10,3ff800349b6 ; jmp 000003ff800349e2: e3e0b0460004 lg %r14,70(%r11) 000003ff800349e8: e3e0b04e0004 lg %r14,78(%r11) 000003ff800349ee: b904002e lgr %r2,%r14 000003ff800349f2: e3b0f0700004 lg %r11,112(%r15) 000003ff800349f8: e3e0f0880004 lg %r14,136(%r15) 000003ff800349fe: 07fe bcr 15,%r14 After fix: 000003ff80ef3db4: a7f40003 brc 15,3ff80ef3dba 000003ff80ef3db8: 0000 unknown 000003ff80ef3dba: e3b0f0700024 stg %r11,112(%r15) 000003ff80ef3dc0: e3e0f0880024 stg %r14,136(%r15) 000003ff80ef3dc6: 0db0 basr %r11,%r0 000003ff80ef3dc8: c0ef00000000 llilf %r14,0 000003ff80ef3dce: e320b0360004 lg %r2,54(%r11) 000003ff80ef3dd4: e330b03e0004 lg %r3,62(%r11) 000003ff80ef3dda: ec230006a065 clgrj %r2,%r3,10,3ff80ef3de6 ; jmp 000003ff80ef3de0: e3e0b0460004 lg %r14,70(%r11) 000003ff80ef3de6: e3e0b04e0004 lg %r14,78(%r11) ; target 000003ff80ef3dec: b904002e lgr %r2,%r14 000003ff80ef3df0: e3b0f0700004 lg %r11,112(%r15) 000003ff80ef3df6: e3e0f0880004 lg %r14,136(%r15) 000003ff80ef3dfc: 07fe bcr 15,%r14 test_bpf.ko suite runs fine after the fix. Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit b91d5329 ] After commit c2ed1880 ("net: ipv6: check route protocol when deleting routes"), ipv6 route checks rt protocol when trying to remove a rt entry. It introduced a side effect causing 'ip -6 route flush cache' not to work well. When flushing caches with iproute, all route caches get dumped from kernel then removed one by one by sending DELROUTE requests to kernel for each cache. The thing is iproute sends the request with the cache whose proto is set with RTPROT_REDIRECT by rt6_fill_node() when kernel dumps it. But in kernel the rt_cache protocol is still 0, which causes the cache not to be matched and removed. So the real reason is rt6i_protocol in the route is not set when it is allocated. As David Ahern's suggestion, this patch is to set rt6i_protocol properly in the route when it is installed and remove the codes setting rtm_protocol according to rt6i_flags in rt6_fill_node. This is also an improvement to keep rt6i_protocol consistent with rtm_protocol. Fixes: c2ed1880 ("net: ipv6: check route protocol when deleting routes") Reported-by:
Jianlin Shi <jishi@redhat.com> Suggested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2dda6400 ] syzkaller was able to trigger a divide by 0 in TCP stack [1] Issue here is that keepalive timer needs to be updated to not attempt to send a probe if the connection setup was deferred using TCP_FASTOPEN_CONNECT socket option added in linux-4.11 [1] divide error: 0000 [#1] SMP CPU: 18 PID: 0 Comm: swapper/18 Not tainted task: ffff986f62f4b040 ti: ffff986f62fa2000 task.ti: ffff986f62fa2000 RIP: 0010:[<ffffffff8409cc0d>] [<ffffffff8409cc0d>] __tcp_select_window+0x8d/0x160 Call Trace: <IRQ> [<ffffffff8409d951>] tcp_transmit_skb+0x11/0x20 [<ffffffff8409da21>] tcp_xmit_probe_skb+0xc1/0xe0 [<ffffffff840a0ee8>] tcp_write_wakeup+0x68/0x160 [<ffffffff840a151b>] tcp_keepalive_timer+0x17b/0x230 [<ffffffff83b3f799>] call_timer_fn+0x39/0xf0 [<ffffffff83b40797>] run_timer_softirq+0x1d7/0x280 [<ffffffff83a04ddb>] __do_softirq+0xcb/0x257 [<ffffffff83ae03ac>] irq_exit+0x9c/0xb0 [<ffffffff83a04c1a>] smp_apic_timer_interrupt+0x6a/0x80 [<ffffffff83a03eaf>] apic_timer_interrupt+0x7f/0x90 <EOI> [<ffffffff83fed2ea>] ? cpuidle_enter_state+0x13a/0x3b0 [<ffffffff83fed2cd>] ? cpuidle_enter_state+0x11d/0x3b0 Tested: Following packetdrill no longer crashes the kernel `echo 0 >/proc/sys/net/ipv4/tcp_timestamps` // Cache warmup: send a Fast Open cookie request 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(3, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation is now in progress) +0 > S 0:0(0) <mss 1460,nop,nop,sackOK,nop,wscale 8,FO,nop,nop> +.01 < S. 123:123(0) ack 1 win 14600 <mss 1460,nop,nop,sackOK,nop,wscale 6,FO abcd1234,nop,nop> +0 > . 1:1(0) ack 1 +0 close(3) = 0 +0 > F. 1:1(0) ack 1 +0 < F. 1:1(0) ack 2 win 92 +0 > . 2:2(0) ack 2 +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 setsockopt(4, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 +.01 connect(4, ..., ...) = 0 +0 setsockopt(4, SOL_TCP, TCP_KEEPIDLE, [5], 4) = 0 +10 close(4) = 0 `echo 1 >/proc/sys/net/ipv4/tcp_timestamps` Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support") Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit ed254971 ] If the sender switches the congestion control during ECN-triggered cwnd-reduction state (CA_CWR), upon exiting recovery cwnd is set to the ssthresh value calculated by the previous congestion control. If the previous congestion control is BBR that always keep ssthresh to TCP_INIFINITE_SSTHRESH, cwnd ends up being infinite. The safe step is to avoid assigning invalid ssthresh value when recovery ends. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
-
Guillaume Nault authored
[ Upstream commit 0a0e1a85 ] Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") dropped the xmit_recursion counter incrementation in ppp_channel_push() and relied on ppp_xmit_process() for this task. But __ppp_channel_push() can also send packets directly (using the .start_xmit() channel callback), in which case the xmit_recursion counter isn't incremented anymore. If such packets get routed back to the parent ppp unit, ppp_xmit_process() won't notice the recursion and will call ppp_channel_push() on the same channel, effectively creating the deadlock situation that the xmit_recursion mechanism was supposed to prevent. This patch re-introduces the xmit_recursion counter incrementation in ppp_channel_push(). Since the xmit_recursion variable is now part of the parent ppp unit, incrementation is skipped if the channel doesn't have any. This is fine because only packets routed through the parent unit may enter the channel recursively. Finally, we have to ensure that pch->ppp is not going to be modified while executing ppp_channel_push(). Instead of taking this lock only while calling ppp_xmit_process(), we now have to hold it for the full ppp_channel_push() execution. This respects the ppp locks ordering which requires locking ->upl before ->downl. Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Gao Feng authored
[ Upstream commit e5dadc65 ] The global percpu variable ppp_xmit_recursion is used to detect the ppp xmit recursion to avoid the deadlock, which is caused by one CPU tries to lock the xmit lock twice. But it would report false recursion when one CPU wants to send the skb from two different PPP devices, like one L2TP on the PPPoE. It is a normal case actually. Now use one percpu member of struct ppp instead of the gloable variable to detect the xmit recursion of one ppp device. Fixes: 55454a56 ("ppp: avoid dealock on recursive xmit") Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
Liu Jianying <jianying.liu@ikuai8.com> Signed-off-by:
-
- 11 Aug, 2017 15 commits
-
-
Greg Kroah-Hartman authored
-
Sinclair Yeh authored
commit 14979adb upstream. Parts of commit <8fbf9d92> (“drm/vmwgfx: Implement the cursor_set2 callback v2”) were not moved over when we started atomic mode set development because at that time the DRM did not support cursor hotspots in the fb struct. This patch fixes what was not moved over. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Tested-by:
-
David S. Miller authored
[ Upstream commit 0ede1c40 ] Mikael Pettersson reported that some test programs in the strace-4.18 testsuite cause an OOPS. After some debugging it turns out that garbage values are returned when an exception occurs, causing the fixup memset() to be run with bogus arguments. The problem is that two of the exception handler stubs write the successfully copied length into the wrong register. Fixes: ee841d0a ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.") Reported-by:
Mikael Pettersson <mikpelinux@gmail.com> Tested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Nitin Gupta authored
[ Upstream commit 8399e4b8 ] Add hstate for each supported hugepage size using arch initcall. This change fixes some hugepage parameter parsing inconsistencies: case 1: no hugepage parameters Without hugepage parameters, only a hugepages-8192kB entry is visible in sysfs. It's different from x86_64 where both 2M and 1G hugepage sizes are available. case 2: default_hugepagesz=[64K|256M|2G] When specifying only a default_hugepagesz parameter, the default hugepage size isn't really changed and it stays at 8M. This is again different from x86_64. Orabug: 25869946 Reviewed-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by:
-
Rob Gardner authored
[ Upstream commit fc290a11 ] This fixes another cause of random segfaults and bus errors that may occur while running perf with the callgraph option. Critical sections beginning with spin_lock_irqsave() raise the interrupt level to PIL_NORMAL_MAX (14) and intentionally do not block performance counter interrupts, which arrive at PIL_NMI (15). But some sections of code are "super critical" with respect to perf because the perf_callchain_user() path accesses user space and may cause TLB activity as well as faults as it unwinds the user stack. One particular critical section occurs in switch_mm: spin_lock_irqsave(&mm->context.lock, flags); ... load_secondary_context(mm); tsb_context_switch(mm); ... spin_unlock_irqrestore(&mm->context.lock, flags); If a perf interrupt arrives in between load_secondary_context() and tsb_context_switch(), then perf_callchain_user() could execute with the context ID of one process, but with an active TSB for a different process. When the user stack is accessed, it is very likely to incur a TLB miss, since the h/w context ID has been changed. The TLB will then be reloaded with a translation from the TSB for one process, but using a context ID for another process. This exposes memory from one process to another, and since it is a mapping for stack memory, this usually causes the new process to crash quickly. This super critical section needs more protection than is provided by spin_lock_irqsave() since perf interrupts must not be allowed in. Since __tsb_context_switch already goes through the trouble of disabling interrupts completely, we fix this by moving the secondary context load down into this better protected region. Orabug: 25577560 Signed-off-by:
Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by:
Rob Gardner <rob.gardner@oracle.com> Signed-off-by:
-
Jane Chu authored
[ Upstream commit 9d53caec ] A large sun4v SPARC system may have moments of intensive xcall activities, usually caused by unmapping many pages on many CPUs concurrently. This can flood receivers with CPU mondo interrupts for an extended period, causing some unlucky senders to hit send-mondo timeout. This problem gets worse as cpu count increases because sometimes mappings must be invalidated on all CPUs, and sometimes all CPUs may gang up on a single CPU. But a busy system is not a broken system. In the above scenario, as long as the receiver is making forward progress processing mondo interrupts, the sender should continue to retry. This patch implements the receiver's forward progress meter by introducing a per cpu counter 'cpu_mondo_counter[cpu]' where 'cpu' is in the range of 0..NR_CPUS. The receiver increments its counter as soon as it receives a mondo and the sender tracks the receiver's counter. If the receiver has stopped making forward progress when the retry limit is reached, the sender declares send-mondo-timeout and panic; otherwise, the receiver is allowed to keep making forward progress. In addition, it's been observed that PCIe hotplug events generate Correctable Errors that are handled by hypervisor and then OS. Hypervisor 'borrows' a guest cpu strand briefly to provide the service. If the cpu strand is simultaneously the only cpu targeted by a mondo, it may not be available for the mondo in 20msec, causing SUN4V mondo timeout. It appears that 1 second is the agreed wait time between hypervisor and guest OS, this patch makes the adjustment. Orabug: 25476541 Orabug: 26417466 Signed-off-by:
Jane Chu <jane.chu@oracle.com> Reviewed-by:
Steve Sistare <steven.sistare@oracle.com> Reviewed-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 1daa8790 ] Seth Forshee noticed a performance degradation with some workloads. This turns out to be due to packet drops. Euan Kemp noticed that this is because we drop all packets where length exceeds the truesize, but for some packets we add in extra memory without updating the truesize. This in turn was kept around unchanged from ab7db917 ("virtio-net: auto-tune mergeable rx buffer size for improved performance"). That commit had an internal reason not to account for the extra space: not enough bits to do it. No longer true so let's account for the allocated length exactly. Many thanks to Seth Forshee for the report and bisecting and Euan Kemp for debugging the issue. Fixes: 680557cf ("virtio_net: rework mergeable buffer handling") Reported-by:
Euan Kemp <euan.kemp@coreos.com> Tested-by:
Seth Forshee <seth.forshee@canonical.com> Tested-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 71ed7ee3 ] Michał reported a NULL pointer deref during fib_sync_down_dev() when unregistering a netdevice. The problem is that we don't check for 'in_dev' being NULL, which can happen in very specific cases. Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or the inetaddr notification chains. However, if an interface isn't configured with any IP address, then it's possible for host routes to be flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in inetdev_destroy(). To reproduce: $ ip link add type dummy $ ip route add local 1.1.1.0/24 dev dummy0 $ ip link del dev dummy0 Fix this by checking for the presence of 'in_dev' before referencing it. Fixes: 982acb97 ("ipv4: fib: Notify about nexthop status changes") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by:
-
Tejun Heo authored
commit 0a94efb5 upstream. 5c0338c6 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") automatically enabled ordered attribute for unbound workqueues w/ max_active == 1. Because ordered workqueues reject max_active and some attribute changes, this implicit ordered mode broke cases where the user creates an unbound workqueue w/ max_active == 1 and later explicitly changes the related attributes. This patch distinguishes explicit and implicit ordered setting and overrides from attribute changes if implict. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 5c0338c6 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") Cc: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 7ad813f2 ] Marc reported that he was not getting the PHY library adjust_link() callback function to run when calling phy_stop() + phy_disconnect() which does not indeed happen because we set the state machine to PHY_HALTED but we don't get to run it to process this state past that point. Fix this with a synchronous call to phy_state_machine() in order to have the state machine actually act on PHY_HALTED, set the PHY device's link down, turn the network device's carrier off and finally call the adjust_link() function. Reported-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Fixes: a390d1f3 ("phylib: convert state_queue work to delayed_work") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit c9f2c1ae ] When an early demuxed packet reaches __udp6_lib_lookup_skb(), the sk reference is retrieved and used, but the relevant reference count is leaked and the socket destructor is never called. Beyond leaking the sk memory, if there are pending UDP packets in the receive queue, even the related accounted memory is leaked. In the long run, this will cause persistent forward allocation errors and no UDP skbs (both ipv4 and ipv6) will be able to reach the user-space. Fix this by explicitly accessing the early demux reference before the lookup, and properly decreasing the socket reference count after usage. Also drop the skb_steal_sock() in __udp6_lib_lookup_skb(), and the now obsoleted comment about "socket cache". The newly added code is derived from the current ipv4 code for the similar path. v1 -> v2: fixed the __udp6_lib_rcv() return code for resubmission, as suggested by Eric Reported-by:
Sam Edwards <CFSworks@gmail.com> Reported-by:
Marc Haber <mh+netdev@zugschlus.de> Fixes: 5425077d ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
Paul Blakey authored
[ Upstream commit bcec601f ] When adding ethtool steering rule with action DISCARD we wrongly pass a NULL dest with dest_num 1 to mlx5_add_flow_rules(). What this error seems to have caused is sending VPORT 0 (MLX5_FLOW_DESTINATION_TYPE_VPORT) as the fte dest instead of no dests. We have fte action correctly set to DROP so it might been ignored anyways. To reproduce use: # sudo ethtool --config-nfc <dev> flow-type ether \ dst aa:bb:cc:dd:ee:ff action -1 Fixes: 74491de9 ("net/mlx5: Add multi dest support") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit f08c39ed ] This is done in order to ensure that work will not run after the cleanup. Fixes: ef9814de ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit d439c845 ] The overflow_period is calculated in seconds. In order to use it for delayed work scheduling translation to jiffies is needed. Fixes: ef9814de ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit cf503308 ] Add the missing option to enable the PTP_CLK_PPS function. In this case pin should be configured as 1PPS IN first and then it will be connected to PPS mechanism. Events will be reported as PTP_CLOCK_PPSUSR events to relevant sysfs. Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support') Signed-off-by:
-
