Document the format of verity files on ext4, and the corresponding inode
and superblock flags.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Make ext4_mpage_readpages() verify data as it is read from fs-verity
files, using the helper functions from fs/verity/.

To support both encryption and verity simultaneously, this required
refactoring the decryption workflow into a generic "post-read
processing" workflow which can do decryption, verification, or both.

The case where the ext4 block size is not equal to the PAGE_SIZE is not
supported yet, since in that case ext4_mpage_readpages() sometimes falls
back to block_read_full_page(), which does not support fs-verity yet.
Co-developed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add most of fs-verity support to ext4.  fs-verity is a filesystem
feature that enables transparent integrity protection and authentication
of read-only files.  It uses a dm-verity like mechanism at the file
level: a Merkle tree is used to verify any block in the file in
log(filesize) time.  It is implemented mainly by helper functions in
fs/verity/.  See Documentation/filesystems/fsverity.rst for the full
documentation.

This commit adds all of ext4 fs-verity support except for the actual
data verification, including:

- Adding a filesystem feature flag and an inode flag for fs-verity.

- Implementing the fsverity_operations to support enabling verity on an
  inode and reading/writing the verity metadata.

- Updating ->write_begin(), ->write_end(), and ->writepages() to support
  writing verity metadata pages.

- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().

ext4 stores the verity metadata (Merkle tree and fsverity_descriptor)
past the end of the file, starting at the first 64K boundary beyond
i_size.  This approach works because (a) verity files are readonly, and
(b) pages fully beyond i_size aren't visible to userspace but can be
read/written internally by ext4 with only some relatively small changes
to ext4.  This approach avoids having to depend on the EA_INODE feature
and on rearchitecturing ext4's xattr support to support paging
multi-gigabyte xattrs into memory, and to support encrypting xattrs.
Note that the verity metadata *must* be encrypted when the file is,
since it contains hashes of the plaintext data.

This patch incorporates work by Theodore Ts'o and Chandan Rajendra.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>

To meet some users' needs, add optional support for having fs-verity
handle a portion of the authentication policy in the kernel.  An
".fs-verity" keyring is created to which X.509 certificates can be
added; then a sysctl 'fs.verity.require_signatures' can be set to cause
the kernel to enforce that all fs-verity files contain a signature of
their file measurement by a key in this keyring.

See the "Built-in signature verification" section of
Documentation/filesystems/fsverity.rst for the full documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add SHA-512 support to fs-verity.  This is primarily a demonstration of
the trivial changes needed to support a new hash algorithm in fs-verity;
most users will still use SHA-256, due to the smaller space required to
store the hashes.  But some users may prefer SHA-512.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add a function for filesystems to call to implement the
FS_IOC_MEASURE_VERITY ioctl.  This ioctl retrieves the file measurement
that fs-verity calculated for the given file and is enforcing for reads;
i.e., reads that don't match this hash will fail.  This ioctl can be
used for authentication or logging of file measurements in userspace.

See the "FS_IOC_MEASURE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add a function for filesystems to call to implement the
FS_IOC_ENABLE_VERITY ioctl.  This ioctl enables fs-verity on a file.

See the "FS_IOC_ENABLE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add functions that verify data pages that have been read from a
fs-verity file, against that file's Merkle tree.  These will be called
from filesystems' ->readpage() and ->readpages() methods.

Since data verification can block, a workqueue is provided for these
methods to enqueue verification work from their bio completion callback.

See the "Verifying data" section of
Documentation/filesystems/fsverity.rst for more information.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add a function fsverity_prepare_setattr() which filesystems that support
fs-verity must call to deny truncates of verity files.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add the fsverity_file_open() function, which prepares an fs-verity file
to be read from.  If not already done, it loads the fs-verity descriptor
from the filesystem and sets up an fsverity_info structure for the inode
which describes the Merkle tree and contains the file measurement.  It
also denies all attempts to open verity files for writing.

This commit also begins the include/linux/fsverity.h header, which
declares the interface between fs/verity/ and filesystems.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Analogous to fs/crypto/, add fields to the VFS inode and superblock for
use by the fs/verity/ support layer:

- ->s_vop: points to the fsverity_operations if the filesystem supports
  fs-verity, otherwise is NULL.

- ->i_verity_info: points to cached fs-verity information for the inode
  after someone opens it, otherwise is NULL.

- S_VERITY: bit in ->i_flags that identifies verity inodes, even when
  they haven't been opened yet and thus still have NULL ->i_verity_info.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add the beginnings of the fs/verity/ support layer, including the
Kconfig option and various helper functions for hashing.  To start, only
SHA-256 is supported, but other hash algorithms can easily be added.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add FS_VERITY_FL to the flags for FS_IOC_GETFLAGS, so that applications
can easily determine whether a file is a verity file at the same time as
they're checking other file flags.  This flag will be gettable only;
FS_IOC_SETFLAGS won't allow setting it, since an ioctl must be used
instead to provide more parameters.

This flag matches the on-disk bit that was already allocated for ext4.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add the UAPI header for fs-verity, including two ioctls:

- FS_IOC_ENABLE_VERITY
- FS_IOC_MEASURE_VERITY

These ioctls are documented in the "User API" section of
Documentation/filesystems/fsverity.rst.

Examples of using these ioctls can be found in fsverity-utils
(https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/fsverity-utils.git).

I've also written xfstests that test these ioctls
(https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/xfstests-dev.git/log/?h=fsverity).
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

fs-verity will be jointly maintained by Eric Biggers and Theodore Ts'o.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Add a documentation file for fs-verity, covering:

- Introduction
- Use cases
- User API
    - FS_IOC_ENABLE_VERITY
    - FS_IOC_MEASURE_VERITY
    - FS_IOC_GETFLAGS
- Accessing verity files
- File measurement computation
    - Merkle tree
    - fs-verity descriptor
- Built-in signature verification
- Filesystem support
    - ext4
    - f2fs
- Implementation details
    - Verifying data
        - Pagecache
        - Block device based filesystems
- Userspace utility
- Tests
- FAQ
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

Pull structleak fix from Kees Cook:
 "Disable gcc-based stack variable auto-init under KASAN (Arnd
  Bergmann).

  This fixes a bunch of build warnings under KASAN and the
  gcc-plugin-based stack auto-initialization features (which are
  arguably redundant, so better to let KASAN control this)"

* tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK

Merge tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - add compile_commands.json to .gitignore

 - fix false-positive warning from gen_compile_commands.py after
   allnoconfig build

 - remove unused code

* tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove unused single-used-m
  gen_compile_commands: lower the entry count threshold
  .gitignore: Add compilation database file
  kbuild: remove unused objectify macro

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc2 to resolve
  some reported issues.

  Nothing major at all, some binder bugfixes for issues found, some new
  mei device ids, firmware building warning fixes, habanalabs fixes, a
  few other build fixes, and a MAINTAINERS update.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  test_firmware: fix a memory leak bug
  hpet: Fix division by zero in hpet_time_div()
  eeprom: make older eeprom drivers select NVMEM_SYSFS
  vmw_balloon: Remove Julien from the maintainers list
  fpga-manager: altera-ps-spi: Fix build error
  mei: me: add mule creek canyon (EHL) device ids
  binder: prevent transactions to context manager from its own process.
  binder: Set end of SG buffer area properly.
  firmware: Fix missing inline
  firmware: fix build errors in paged buffer handling code
  habanalabs: don't reset device when getting VRHOT
  habanalabs: use %pad for printing a dma_addr_t

Pull tty fixes from Greg KH:
 "Here are two tty/vt fixes:

   - delete the netx-serial driver as the arch has been removed, no need
     to keep the serial driver for it around either.

   - vt console_lock fix to resolve a reported noisy warning at runtime

  Both of these have been in linux-next with no reported issues"

* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Grab console_lock around con_is_bound in show_bind
  tty: serial: netx: Delete driver

Pull SPDX fixes from Greg KH:
 "Here are some small SPDX fixes for 5.3-rc2 for things that came in
  during the 5.3-rc1 merge window that we previously missed.

  Only three small patches here:

   - two uapi patches to resolve some SPDX tags that were not correct

   - fix an invalid SPDX tag in the iomap Makefile file

  All have been properly reviewed on the public mailing lists"

* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  iomap: fix Invalid License ID
  treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
  treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers

Pull USB fixes from Greg KH:
 "Here are some small fixes for 5.3-rc2. All of these resolve some
  reported issues, some more than others :)

  Included in here is:

   - xhci fix for an annoying issue with odd devices

   - reversion of some usb251xb patches that should not have been merged

   - usb pci quirk additions and fixups

   - usb storage fix

   - usb host controller error test fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
  usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
  Revert "usb: usb251xb: Add US port lanes inversion property"
  Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
  usb: wusbcore: fix unbalanced get/put cluster_id
  usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
  usb-storage: Add a limitation for blk_queue_max_hw_sectors()
  usb: pci-quirks: Minor cleanup for AMD PLL quirk
  usb: pci-quirks: Correct AMD PLL quirk detection

Pull ARM SoC fixes from Olof Johansson:
 "Here's the first batch of fixes for this release cycle.

  Main diffstat here is the re-deletion of netx. I messed up and most
  likely didn't remove the files from the index when I test-merged this
  and saw conflicts, and from there on out 'git rerere' remembered the
  mistake and I missed checking it. Here it's done again as expected.

  Besides that:

   - A defconfig refresh + enabling of new drivers for u8500

   - i.MX fixlets for i2c/SAI/pinmux

   - sleep.S build fix for Davinci

   - Broadcom devicetree build/warning fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: defconfig: u8500: Add new drivers
  ARM: defconfig: u8500: Refresh defconfig
  ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
  ARM: davinci: fix sleep.S build error on ARMv4
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: Delete netx a second time
  ARM: dts: imx7ulp: Fix usb-phy unit address format

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and functional updates:

   - Prevent stale huge I/O TLB mappings on 32bit. A long standing bug
     which got exposed by KPTI support for 32bit

   - Prevent bogus access_ok() warnings in arch_stack_walk_user()

   - Add display quirks for Lenovo devices which have height and width
     swapped

   - Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of
     the CR2 bug fix series.

   - Unbreak handling of force enabled HPET by moving the 'is HPET
     counting' check back to the original place.

   - A more accurate check for running on a hypervisor platform in the
     MDS mitigation code. Not perfect, but more accurate than the
     previous one.

   - Update a stale and confusing comment vs. IRQ stacks"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/mds: Apply more accurate check on hypervisor platform
  x86/hpet: Undo the early counter is counting check
  x86/entry/32: Pass cr2 to do_async_page_fault()
  x86/irq/64: Update stale comment
  x86/sysfb_efi: Add quirks for some devices with swapped width and height
  x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()
  mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
  x86/mm: Sync also unmappings in vmalloc_sync_all()
  x86/mm: Check for pfn instead of page in vmalloc_sync_one()

Pull scheduler fixes from Thomas Gleixner:
 "Two fixes for the fair scheduling class:

   - Prevent freeing memory which is accessible by concurrent readers

   - Make the RCU annotations for numa groups consistent"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Use RCU accessors consistently for ->numa_group
  sched/fair: Don't free p->numa_faults with concurrent readers

Pull perf fixes from Thomas Gleixner:
 "A pile of perf related fixes:

  Kernel:
   - Fix SLOTS PEBS event constraints for Icelake CPUs

   - Add the missing mask bit to allow counting hardware generated
     prefetches on L3 for Icelake CPUs

   - Make the test for hypervisor platforms more accurate (as far as
     possible)

   - Handle PMUs correctly which override event->cpu

   - Yet another missing fallthrough annotation

  Tools:
     perf.data:
        - Fix loading of compressed data split across adjacent records
        - Fix buffer size setting for processing CPU topology perf.data
          header.

     perf stat:
        - Fix segfault for event group in repeat mode
        - Always separate "stalled cycles per insn" line, it was being
          appended to the "instructions" line.

     perf script:
        - Fix --max-blocks man page description.
        - Improve man page description of metrics.
        - Fix off by one in brstackinsn IPC computation.

     perf probe:
        - Avoid calling freeing routine multiple times for same pointer.

     perf build:
        - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
          treated as errors, breaking the build"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Mark expected switch fall-throughs
  perf/core: Fix creating kernel counters for PMUs that override event->cpu
  perf/x86: Apply more accurate check on hypervisor platform
  perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
  perf/x86/intel: Fix SLOTS PEBS event constraint
  perf build: Do not use -Wshadow on gcc < 4.8
  perf probe: Avoid calling freeing routine multiple times for same pointer
  perf probe: Set pev->nargs to zero after freeing pev->args entries
  perf session: Fix loading of compressed data split across adjacent records
  perf stat: Always separate stalled cycles per insn
  perf stat: Fix segfault for event group in repeat mode
  perf tools: Fix proper buffer size for feature processing
  perf script: Fix off by one in brstackinsn IPC computation
  perf script: Improve man page description of metrics
  perf script: Fix --max-blocks man page description

Pull locking fixes from Thomas Gleixner:
 "A set of locking fixes:

   - Address the fallout of the rwsem rework. Missing ACQUIREs and a
     sanity check to prevent a use-after-free

   - Add missing checks for unitialized mutexes when mutex debugging is
     enabled.

   - Remove the bogus code in the generic SMP variant of
     arch_futex_atomic_op_inuser()

   - Fixup the #ifdeffery in lockdep to prevent compile warnings"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Test for initialized mutex
  locking/lockdep: Clean up #ifdef checks
  locking/lockdep: Hide unused 'class' variable
  locking/rwsem: Add ACQUIRE comments
  tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
  lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop
  locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
  locking/rwsem: Don't call owner_on_cpu() on read-owner
  futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser()

Pull objtool fix from Thomas Gleixner:
 "A single robustness fix for objtool to handle unbalanced CLAC
  invocations under all circumstances"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Improve UACCESS coverage

Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
 "This marks switch cases where we are expecting to fall through, and
  globally enables the -Wimplicit-fallthrough option in the main
  Makefile.

  Finally, some missing-break fixes that have been tagged for -stable:

   - drm/amdkfd: Fix missing break in switch statement

   - drm/amdgpu/gfx10: Fix missing break in switch statement

  With these changes, we completely get rid of all the fall-through
  warnings in the kernel"

* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  Makefile: Globally enable fall-through warning
  drm/i915: Mark expected switch fall-throughs
  drm/amd/display: Mark expected switch fall-throughs
  drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
  drm/amdgpu/gfx10: Fix missing break in switch statement
  drm/amdkfd: Fix missing break in switch statement
  perf/x86/intel: Mark expected switch fall-throughs
  mtd: onenand_base: Mark expected switch fall-through
  afs: fsclient: Mark expected switch fall-throughs
  afs: yfsclient: Mark expected switch fall-throughs
  can: mark expected switch fall-throughs
  firewire: mark expected switch fall-throughs

Pull s390 updates from Heiko Carstens:

 - Add ABI to kernel image file which allows e.g. the file utility to
   figure out the kernel version.

 - Wire up clone3 system call.

 - Add support for kasan bitops instrumentation.

 - uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.

 - Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
   defined with 2 GB instead of the default value of 1 MB.

 - Farhan Ali leaves the group of vfio-ccw maintainers.

 - Various small vfio-ccw fixes.

 - Add missing locking for airq_areas array in virtio code.

 - Minor qdio improvements.

* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  MAINTAINERS: vfio-ccw: Remove myself as the maintainer
  s390/mm: use shared variables for sysctl range check
  virtio/s390: fix race on airq_areas[]
  s390/dma: provide proper ARCH_ZONE_DMA_BITS value
  s390/kasan: add bitops instrumentation
  s390/bitops: make test functions return bool
  s390: wire up clone3 system call
  kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
  s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
  s390/hypfs: fix a typo in the name of a function
  s390/qdio: restrict QAOB usage to IQD unicast queues
  s390/qdio: add sanity checks to the fast-requeue path
  s390: enable detection of kernel version from bzImage
  Documentation: fix vfio-ccw doc
  vfio-ccw: Update documentation for csch/hsch
  vfio-ccw: Don't call cp_free if we are processing a channel program
  vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
  vfio-ccw: Fix memory leak and don't call cp_free in cp_init
  vfio-ccw: Fix misleading comment when setting orb.cmd.c64

Pull Devicetree fixes from Rob Herring:
 "The nvmem changes would typically go thru Greg's tree, but they were
  missed in the merge window. [ Acked by Greg ]

  Summary:

   - Fix mismatches in $id values and actual filenames. Now checked by
     tools.

   - Convert nvmem binding to DT schema

   - Fix a typo in of_property_read_bool() kerneldoc

   - Remove some redundant description in al-fic interrupt-controller"

* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix more $id value mismatches filenames
  dt-bindings: nvmem: SID: Fix the examples node names
  dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
  of: Fix typo in kerneldoc
  dt-bindings: interrupt-controller: al-fic: remove redundant binding
  dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id

Pull libnvdimm fixes from Dan Williams:
 "A collection of locking and async operations fixes for v5.3-rc2. These
  had been soaking in a branch targeting the merge window, but missed
  due to a regression hunt. This fixed up version has otherwise been in
  -next this past week with no reported issues.

  In order to gain confidence in the locking changes the pull also
  includes a debug / instrumentation patch to enable lockdep coverage
  for libnvdimm subsystem operations that depend on the device_lock for
  exclusion. As mentioned in the changelog it is a hack, but it works
  and documents the locking expectations of the sub-system in a way that
  others can use lockdep to verify. The driver core touches got an ack
  from Greg.

  Summary:

   - Fix duplicate device_unregister() calls (multiple threads competing
     to do unregister work when scheduling device removal from a sysfs
     attribute of the self-same device).

   - Fix badblocks registration order bug. Ensure region badblocks are
     initialized in advance of namespace registration.

   - Fix a deadlock between the bus lock and probe operations.

   - Export device-core infrastructure to coordinate async operations
     via the device ->dead state.

   - Add device-core infrastructure to validate device_lock() usage with
     lockdep"

* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  driver-core, libnvdimm: Let device subsystems add local lockdep coverage
  libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
  libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
  libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
  libnvdimm/region: Register badblocks before namespaces
  libnvdimm/bus: Prevent duplicate device_unregister() calls
  drivers/base: Introduce kill_device()

This is unused since commit 9f69a496 ("kbuild: split out *.mod out
of {single,multi}-used-m rules").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Running gen_compile_commands.py after building the kernel with
allnoconfig gave this:

$ ./scripts/gen_compile_commands.py
WARNING: Found 449 entries. Have you compiled the kernel?
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.
Signed-off-by: Toru Komatsu <k0ma@utam0k.jp>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 415008af ("docs-rst: convert lsm from DocBook to ReST")
removed the last users of this macro.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull block DMA segment fix from Jens Axboe:
 "Here's the virtual boundary segment size fix"

* tag 'for-linus-20190726-2' of git://git.kernel.dk/linux-block:
  block: fix max segment size handling in blk_queue_virt_boundary

Pull selinux fix from Paul Moore:
 "One small SELinux patch to add some proper bounds/overflow checking
  when adding a new sid/secid"

* tag 'selinux-pr-20190726' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: check sidtab limit before adding a new entry

The path in the schema '$id' values are wrong. Fix them.
Signed-off-by: Rob Herring <robh@kernel.org>