- 11 May, 2016 25 commits
-
-
Dan Streetman authored
commit 32a4e169 upstream. Instead of using "zswap" as the name for all zpools created, add an atomic counter and use "zswap%x" with the counter number for each zpool created, to provide a unique name for each new zpool. As zsmalloc, one of the zpool implementations, requires/expects a unique name for each pool created, zswap should provide a unique name. The zsmalloc pool creation does not fail if a new pool with a conflicting name is created, unless CONFIG_ZSMALLOC_STAT is enabled; in that case, zsmalloc pool creation fails with -ENOMEM. Then zswap will be unable to change its compressor parameter if its zpool is zsmalloc; it also will be unable to change its zpool parameter back to zsmalloc, if it has any existing old zpool using zsmalloc with page(s) in it. Attempts to change the parameters will result in failure to create the zpool. This changes zswap to provide a unique name for each zpool creation. Fixes: f1c54846 ("zswap: dynamic pool creation") Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hugh Dickins authored
commit 14af4a5e upstream. /proc/sys/vm/stat_refresh warns nr_isolated_anon and nr_isolated_file go increasingly negative under compaction: which would add delay when should be none, or no delay when should delay. The bug in compaction was due to a recent mmotm patch, but much older instance of the bug was also noticed in isolate_migratepages_range() which is used for CMA and gigantic hugepage allocations. The bug is caused by putback_movable_pages() in an error path decrementing the isolated counters without them being previously incremented by acct_isolated(). Fix isolate_migratepages_range() by removing the error-path putback, thus reaching acct_isolated() with migratepages still isolated, and leaving putback to caller like most other places do. Fixes: edc2ca61 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") [vbabka@suse.cz: expanded the changelog] Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit 689de1d6 upstream. This is a fairly minimal fixup to the horribly bad behavior of hash_64() with certain input patterns. In particular, because the multiplicative value used for the 64-bit hash was intentionally bit-sparse (so that the multiply could be done with shifts and adds on architectures without hardware multipliers), some bits did not get spread out very much. In particular, certain fairly common bit ranges in the input (roughly bits 12-20: commonly with the most information in them when you hash things like byte offsets in files or memory that have block factors that mean that the low bits are often zero) would not necessarily show up much in the result. There's a bigger patch-series brewing to fix up things more completely, but this is the fairly minimal fix for the 64-bit hashing problem. It simply picks a much better constant multiplier, spreading the bits out a lot better. NOTE! For 32-bit architectures, the bad old hash_64() remains the same for now, since 64-bit multiplies are expensive. The bigger hashing cleanup will replace the 32-bit case with something better. The new constants were picked by George Spelvin who wrote that bigger cleanup series. I just picked out the constants and part of the comment from that series. Cc: George Spelvin <linux@horizon.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Shaohua Li authored
commit 9c573de3 upstream. blk_queue_split marks bio unmergeable, which makes sense for normal bio. But if dispatching the bio to underlayer disk, the blk_queue_split checks are invalid, hence it's possible the bio becomes mergeable. In the reported bug, this bug causes trim against raid0 performance slash https://bugzilla.kernel.org/show_bug.cgi?id=117051Reported-and-tested-by:
Park Ju Hyung <qkrwngud825@gmail.com> Fixes: 6ac45aeb(block: avoid to merge splitted bio) Cc: Ming Lei <ming.lei@canonical.com> Cc: Neil Brown <neilb@suse.de> Reviewed-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Chunyu Hu authored
commit 854145e0 upstream. Currently register functions for events will be called through the 'reg' field of event class directly without any check when seting up triggers. Triggers for events that don't support register through debug fs (events under events/ftrace are for trace-cmd to read event format, and most of them don't have a register function except events/ftrace/functionx) can't be enabled at all, and an oops will be hit when setting up trigger for those events, so just not creating them is an easy way to avoid the oops. Link: http://lkml.kernel.org/r/1462275274-3911-1-git-send-email-chuhu@redhat.com Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Johannes Berg authored
commit e6436be2 upstream. In the case that dev_alloc_name() fails, e.g. because the name was given by the user and already exists, we need to clean up properly and free the per-CPU statistics. Fix that. Fixes: 5a490510 ("mac80211: use per-CPU TX/RX statistics") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Oleksij Rempel authored
commit de478a61 upstream. by moving common code to ar5008_hw_cmn_spur_mitigate i forgot to move mask_m & mask_p initialisation. This coused a performance regression on ar9281. Fixes: f911085f ("ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.") Reported-by:
Gustav Frederiksen <lkml2017@openmailbox.org> Tested-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit aeb6641f upstream. gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array() call in lpfc_online(), which clearly doesn't look right: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online': drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] lpfc_destroy_vport_work_array(phba, vports); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not if (vports != NULL) ^~ Looking at the patch that introduced this code, it's clear that the behavior is correct and the indentation is wrong. This fixes the indentation and adds curly braces around the previous if() block for clarity, as that is most likely what caused the code to be misindented in the first place. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 549e55cd ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list") Reviewed-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stephen Boyd authored
commit 0f75e1a3 upstream. The offset seems to have been copied from the sata clk. Fix it so that enabling the crypto engine source clk works. Tested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 5f775498 ("clk: qcom: Fully support apq8064 global clock control") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Linus Walleij authored
commit ec7957a6 upstream. Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c "clk: vexpress: Add separate SP810 driver" Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Srinivas Kandagatla authored
commit 732d6913 upstream. This patch corrects the enable register offset which is actually 0x36cc instead of 0x36c4 Signed-off-by:
-
Andreas Färber authored
commit bb473593 upstream. As preparation for arm64 based mesongxbb, which pulls in this code once enabling ARCH_MESON, fix a size_t vs. unsigned int type mismatch. The loop uses a local unsigned int variable, so adopt that type, matching the header. Fixes: 7a29a869 ("clk: meson: Add support for Meson clock controller") Signed-off-by:
Andreas Färber <afaerber@suse.de> Acked-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
-
Shawn Lin authored
commit 2467b674 upstream. Add free memeory if rockchip_clk_register_branch fails. Fixes: a245fecb ("clk: rockchip: add basic infrastructure...") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Shawn Lin authored
commit 1d961f11 upstream. If we fail to probe the driver, we should not directly break from the for_each_available_child_of_node since it calls of_node_get while iterating. This patch add of_node_put to fix the unbalanced call pair. Fixes: 7c696693 ("soc: rockchip: power-domain: Add power domain driver") Signed-off-by:
-
Heiko Stuebner authored
commit 50359819 upstream. Commit e6d5e7d9 ("clk-divider: Fix READ_ONLY when divider > 1") removed the special ops struct for read-only clocks and instead opted to handle them inside the regular ops. On the rk3368 this results in breakage as aclkm now gets set a value. While it is the same divider value, the A53 core still doesn't like it, which can result in the cpu ending up in a hang. The reason being that "ACLKENMasserts one clock cycle before the rising edge of ACLKM" and the clock should only be touched when STANDBYWFIL2 is asserted. To fix this, reintroduce the read-only ops but do include the round_rate callback. That way no writes that may be unsafe are done to the divider register in any case. The Rockchip use of the clk_divider_ops is adapted to this split again, as is the nxp, lpc18xx-ccu driver that was included since the original commit. On lpc18xx-ccu the divider seems to always be read-only so only uses the new ops now. Fixes: e6d5e7d9 ("clk-divider: Fix READ_ONLY when divider > 1") Reported-by:
Zhang Qing <zhangqing@rock-chips.com> Signed-off-by:
-
Krzysztof Halasa authored
commit 88e9da9a upstream. The "where" offset was added twice, fix it. Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Fixes: 498a92d4 ("ARM: cns3xxx: pci: avoid potential stack overflow") Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Amitkumar Karwar authored
commit a6139b62 upstream. This patch corrects the error case in association path by returning -1. Earlier "media_connected" used to remain on in this error case causing failure for further association attempts. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Fixes: b887664d ('mwifiex: channel switch handling for station') Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Dan Carpenter authored
commit 8134233e upstream. If the call to acpi_get_object_info() fails then "info" hasn't been initialized. In that situation, we already know that "version" should be XGENE_AHCI_V1 so we don't actually need to dereference "info". Fixes: c9802a4b ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Dan Streetman authored
commit da6ccaaa upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Andy Shevchenko authored
commit 84cb36ca upstream. We forgot to remove the clock tree if something goes wrong in ->probe(). Add a call to intel_lpss_unregister_clock() on error path in ->probe() to fix the potential issue. Fixes: 4b45efe8 (mfd: Add support for Intel Sunrisepoint LPSS devices) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Julian Anastasov authored
commit f719e375 upstream. Jiri Bohac is reporting for a problem where the attempt to reschedule existing connection to another real server needs proper redirect for the conntrack used by the IPVS connection. For example, when IPVS connection is created to NAT-ed real server we alter the reply direction of conntrack. If we later decide to select different real server we can not alter again the conntrack. And if we expire the old connection, the new connection is left without conntrack. So, the only way to redirect both the IPVS connection and the Netfilter's conntrack is to drop the SYN packet that hits existing connection, to wait for the next jiffie to expire the old connection and its conntrack and to rely on client's retransmission to create new connection as usually. Jiri Bohac provided a fix that drops all SYNs on rescheduling, I extended his patch to do such drops only for connections that use conntrack. Here is the original report from Jiri Bohac: Since commit dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead"), new connections to dead servers are redistributed immediately to new servers. The old connection is expired using ip_vs_conn_expire_now() which sets the connection timer to expire immediately. However, before the timer callback, ip_vs_conn_expire(), is run to clean the connection's conntrack entry, the new redistributed connection may already be established and its conntrack removed instead. Fix this by dropping the first packet of the new connection instead, like we do when the destination server is not available. The timer will have deleted the old conntrack entry long before the first packet of the new connection is retransmitted. Fixes: dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead") Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Marco Angaroni authored
commit 7617a24f upstream. The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by:
Marco Angaroni <marcoangaroni@gmail.com> Acked-by:
-
Arnd Bergmann authored
commit 3f20efba upstream. ip_vs_fill_iph_skb_off() may not find an IP header, and gcc has determined that ip_vs_sip_fill_param() then incorrectly accesses the protocol fields: net/netfilter/ipvs/ip_vs_pe_sip.c: In function 'ip_vs_sip_fill_param': net/netfilter/ipvs/ip_vs_pe_sip.c:76:5: error: 'iph.protocol' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (iph.protocol != IPPROTO_UDP) ^ net/netfilter/ipvs/ip_vs_pe_sip.c:81:10: error: 'iph.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] dataoff = iph.len + sizeof(struct udphdr); ^ This adds a check for the ip_vs_fill_iph_skb_off() return code before looking at the ip header data returned from it. Signed-off-by:
-
Hariprasad S authored
commit 32cc92c7 upstream. For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit e924c60d which was commit 7f821fc9 upstream. It shouldn't have been applied as the original was already in 4.4. Reported-by:
Jiri Slaby <jslaby@suse.cz> Cc: Michael Neuling <mikey@neuling.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
- 04 May, 2016 15 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit c4924e92 upstream. The info->status[] array has 3 elements. We are using size MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as intended. Fixes: 135d9f7d ('extcon: max77843: Clear IRQ bits state before request IRQ') Signed-off-by:
Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> [cw00.choi: Modify the patch title] Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit 042d4460 upstream. The newly added STM code uses SRCU, but does not ensure that this code is part of the kernel: drivers/built-in.o: In function `stm_source_link_show': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `stm_source_link_drop': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' This adds a Kconfig 'select' statement like all the other SRCU using drivers have. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 3deb9438 upstream. gcc-6 found a dubious indentation in the megasas_mgmt_fw_ioctl function: drivers/scsi/megaraid/megaraid_sas_base.c: In function 'megasas_mgmt_fw_ioctl': drivers/scsi/megaraid/megaraid_sas_base.c:6658:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] kbuff_arr[i] = NULL; ^~~~~~~~~ drivers/scsi/megaraid/megaraid_sas_base.c:6653:3: note: ...this 'if' clause, but it is not if (kbuff_arr[i]) ^~ The code is actually correct, as there is no downside in clearing a NULL pointer again. This clarifies the code and avoids the warning by adding extra curly braces. Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
NeilBrown authored
commit a6ab1e81 upstream. sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer set. In this case it aborts the queuing of the upcall. However it has already taken a new counted reference on "h" and doesn't "put" it, even though it frees the data structure holding the reference. So let's delay the "cache_get" until we know we need it. Fixes: f9e1aedc ("sunrpc/cache: remove races with queuing an upcall.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Caesar Wang authored
commit 43b4eb9f upstream. As the Dan report the smatch check the thermal driver warning: drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt() warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) => (s32min-s32max > s32max)' Although The shut_temp read from DT is u32,the temperature is currently represented as int not long in the thermal driver. Let's change to make shut_temp instead of the thermal->tshut_temp for the condition. Fixes: commit 437df217 ("thermal: rockchip: consistently use int for temperatures") Reported-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Al Viro authored
commit 6b87b70c upstream. Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used to be equivalent to make allmodconfig; these days it hardwires MODULES to n. In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is treated as if it set it to n. Regression had been introduced by commit cfa98f ("kconfig: do not override symbols already set"); what happens is that conf_read_simple() does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and has conf_set_all_new_symbols() skip modules_sym. It's pretty easy to fix - simply move that call of sym_calc_value() into the callers, except for the ones in KCONFIG_ALLCONFIG handling. Objections? Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Fixes: cfa98f2e ("kconfig: do not override symbols already set") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Guo-Fu Tseng authored
commit 81422e67 upstream. According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guo-Fu Tseng authored
commit 0772a99b upstream. Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by:
-
Fabio Estevam authored
commit 33b96d2c upstream. Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Suggested-by:
Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Robert Jarzmik authored
commit 07c6b2d0 upstream. Since the switch from mmp_pdma to pxa_dma driver for pxa architectures, the pxa_dma requires 2 arguments, namely the requestor line and the requested priority. Fix the only left device node which was still passing only one argument, making the pxa3xx-nand driver misbehave in a device-tree configuration, ie. failing all data transfers. Fixes: c943646d ("ARM: dts: pxa: add dma engine node to pxa3xx-nand") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Lior Amsalem authored
commit b3a7f31e upstream. The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which requires the PHY speed to be set in the LP_PHY_CTL register for SATA hotplug to work. Therefore, this commit updates the compatible string used to describe the SATA IP in Armada 375 from marvell,orion-sata to marvell,armada-370-sata. Fixes: 4de59085 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Arnd Bergmann authored
commit dc7eb9d5 upstream. We cannot select a symbol that has disabled dependencies, so we get a warning if we ever enable EXYNOS_THERMAL without also turning on THERMAL_OF: warning: (ARCH_EXYNOS) selects EXYNOS_THERMAL which has unmet direct dependencies (THERMAL && (ARCH_EXYNOS || COMPILE_TEST) && THERMAL_OF) This adds another 'select' in the platform code to avoid that case. Alternatively, we could decide to not select EXYNOS_THERMAL here and instead make it a user option. Signed-off-by:
-
Arnd Bergmann authored
commit ef2b1d77 upstream. The atlas7 clock controller driver registers a reset controller for itself, which causes a link error when the subsystem is disabled: drivers/built-in.o: In function `atlas7_clk_init': drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register' As the clk driver does not have a Kconfig symbol for itself but it always built-in when the platform is enabled, we have to ensure that the reset controller subsystem is also built-in in this case. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Fixes: 301c5d29 ("clk: sirf: add CSR atlas7 clk and reset support") Signed-off-by:
-
Pali Rohár authored
commit 98f42221 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
