GPIO fixes for v3.3-rc2

Straight forward bug fixes in this branch.  A couple of x86 gpio drivers
missing spinlock initialization, an API change fixup for the samsung driver
and a name typo fix.

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio: Add missing spin_lock_init in gpio-ml-ioh driver
  gpio: Add missing spin_lock_init in gpio-pch driver
  gpio: samsung: adapt to changes in gpio specifier translator function declaration
  Correct bad gpio naming

Merge tag 'hwmon-fixes-for-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

One patch to fix fan detection on NCT6776F.

* tag 'hwmon-fixes-for-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83627ehf) Fix number of fans for NCT6776F

Setting the task name is done within setup_new_exec() by accessing
bprm->filename. However this happens after flush_old_exec().
This may result in a use after free bug, flush_old_exec() may
"complete" vfork_done, which will wake up the parent which in turn
may free the passed in filename.
To fix this add a new tcomm field in struct linux_binprm which
contains the now early generated task name until it is used.

Fixes this bug on s390:

  Unable to handle kernel pointer dereference at virtual kernel address 0000000039768000
  Process kworker/u:3 (pid: 245, task: 000000003a3dc840, ksp: 0000000039453818)
  Krnl PSW : 0704000180000000 0000000000282e94 (setup_new_exec+0xa0/0x374)
  Call Trace:
  ([<0000000000282e2c>] setup_new_exec+0x38/0x374)
   [<00000000002dd12e>] load_elf_binary+0x402/0x1bf4
   [<0000000000280a42>] search_binary_handler+0x38e/0x5bc
   [<0000000000282b6c>] do_execve_common+0x410/0x514
   [<0000000000282cb6>] do_execve+0x46/0x58
   [<00000000005bce58>] kernel_execve+0x28/0x70
   [<000000000014ba2e>] ____call_usermodehelper+0x102/0x140
   [<00000000005bc8da>] kernel_thread_starter+0x6/0xc
   [<00000000005bc8d4>] kernel_thread_starter+0x0/0xc
  Last Breaking-Event-Address:
   [<00000000002830f0>] setup_new_exec+0x2fc/0x374

  Kernel panic - not syncing: Fatal exception: panic_on_oops
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NCT6776F can select fan input pins for fans 3 to 5 with a secondary set of
chip register bits. Check that second set of bits in addition to the first set
to detect if fans 3..5 are monitored.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare <khali@linux-fr.org>

Power management fixes for 3.3-rc3

Three power management regression fixes, one for a recent regression introcuded
by the freezer changes during the 3.3 merge window and two for regressions
in cpuidle (resulting from PM QoS changes) and in the hibernate user space
interface, both introduced during the 3.2 development cycle.

They include:

* Two hibernate (s2disk) regression fixes from Srivatsa S. Bhat (for
 regressions introduced during the 3.3 merge window and during the 3.2
 development cycle).

* A cpuidle fix from Venki Pallipadi for a regression resulting from PM QoS
 changes during the 3.2 development cycle causing cpuidle to work incorrectly
 for CONFIG_PM unset.

* tag 'pm-fixes-for-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: CPU C-state breakage with PM Qos change
  PM / Freezer: Thaw only kernel threads if freezing of kernel threads fails
  PM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl path

Looks like change "PM QoS: Move and rename the implementation files"
merged during the 3.2 development cycle made PM QoS depend on
CONFIG_PM which depends on (PM_SLEEP || PM_RUNTIME).

That breaks CPU C-states with kernels not having these CONFIGs, causing CPUs
to spend time in Polling loop idle instead of going into deep C-states,
consuming way way more power. This is with either acpi idle or intel idle
enabled.

Either CONFIG_PM should be enabled with any pm_qos users or
the !CONFIG_PM pm_qos_request() should return sane defaults not to break
the existing users. Here's is the patch for the latter option.

[rjw: Modified the changelog slightly.]
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org

If freezing of kernel threads fails, we are expected to automatically
thaw tasks in the error recovery path. However, at times, we encounter
situations in which we would like the automatic error recovery path
to thaw only the kernel threads, because we want to be able to do
some more cleanup before we thaw userspace. Something like:

error = freeze_kernel_threads();
if (error) {
	/* Do some cleanup */

	/* Only then thaw userspace tasks*/
	thaw_processes();
}

An example of such a situation is where we freeze/thaw filesystems
during suspend/hibernation. There, if freezing of kernel threads
fails, we would like to thaw the frozen filesystems before thawing
the userspace tasks.

So, modify freeze_kernel_threads() to thaw only kernel threads in
case of freezing failure. And change suspend_freeze_processes()
accordingly. (At the same time, let us also get rid of the rather
cryptic usage of the conditional operator (:?) in that function.)

[rjw: In fact, this patch fixes a regression introduced during the
 3.3 merge window, because without it thaw_processes() may be called
 before swsusp_free() in some situations and that may lead to massive
 memory allocation failures.]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

arm-soc fixes for 3.3-rc

* A series of OMAP regression fixes for merge window fallout
* Two patches for Davinci, one removes some misdefined clocks, the other
  is a regression fix for merge window fallout
* Two patches that makes Broadcom bcmring build again (and removes a
  bunch of unused code in the process)

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcmring: fix build failure in mach-bcmring/arch.c
  ARM: bcmring: remove unused DMA map code
  ARM: davinci: update mdio bus name
  ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap
  ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree
  ARM: OMAP: fix MMC2 loopback clock handling
  ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup
  ARM: OMAP2+: GPMC: fix device size setup
  ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter
  ARM: OMAP3: hwmod data: register dss hwmods after dss_core
  ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage
  ARM: OMAP2+: io: fix compilation breakage on 2420-only configs
  ARM: OMAP4: hwmod data: Add names for DMIC memory address space
  ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc
  ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class
  ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks
  ARM: OMAP2: fix regulator warnings
  ARM: OMAP2: fix omap3 touchbook kconfig warning
  i2c: OMAP: Fix OMAP1 build error

Upstream commit d1fce9c1

   "ARM: restart: bcmring: use new restart hook"

breaks building of this platform, since what used to be the
last field of the MACHINE_START/END block didn't have a
trailing comma.  Once another field was added below, we get:

arch/arm/mach-bcmring/arch.c:198: error: request for member 'restart' in something not a structure or union
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Jiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Remove BCMRING DMA map code which is no longer used.

This also fixes a build error with dma.c introduced by
bfcd2ea6.
Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Lenovo Ideapad U455 to 'reset' blacklist
  Input: serio_raw - return proper result when serio_raw_read fails
  Input: document device properties
  Input: twl4030_keypad - fix comment (trivial)
  Input: gpio_keys - fix struct device declared inside parameter list
  Input: evdev - fix variable initialisation

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  i.MX SDMA: Fix burstsize settings
  ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only
  dma: sh_dma: not all SH DMAC implementations support MEMCPY
  at_hdmac: bugfix for enabling channel irq
  dmaengine: fix missing 'cnt' in ?: in dmatest

* akpm:
  mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration
  readahead: fix pipeline break caused by block plug
  kprobes: fix a memory leak in function pre_handler_kretprobe()
  drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
  lkdtm: avoid calling lkdtm_do_action() with spinlock held
  mm/filemap_xip.c: fix race condition in xip_file_fault()
  mm/memcontrol.c: fix warning with CONFIG_NUMA=n
  avr32: select generic atomic64_t support
  mm: postpone migrated page mapping reset
  xtensa: fix memscan()
  MAINTAINERS: update lguest F: patterns
  MAINTAINERS: remove staging sections
  MAINTAINERS: remove iMX5 section
  MAINTAINERS: update partitions block F: patterns

 - Fix a regression in 16-bit Atmel NAND flash which was introduced in 3.1
 - Fix breakage with MTD suspend caused by the API rework
 - Fix a problem with resetting the MX28 BCH module
 - A couple of other trivial fixes

* tag 'for-linus-3.3-20120204' of git://git.infradead.org/~dwmw2/mtd-3.3:
  Revert "mtd: atmel_nand: optimize read/write buffer functions"
  mtd: fix MTD suspend
  jffs2: do not initialize variable unnecessarily
  mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23
  mtd: nand: fix typo in comment

This reverts commit fb542750.

The reason is that it breaks 16 bits NAND flash as it was reported by
Nikolaus Voss and confirmed by Eric Bénard.

Nicolas Ferre <nicolas.ferre@atmel.com> alco confirmed:
"After double checking with designers, I must admit that I misunderstood
the way of optimizing accesses to SMC. 16 bit nand is not so common
those days..."
Reported-by: Nikolaus Voss <n.voss@weinmann.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org [3.1+]

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7314/1: kuser: consistently use usr_ret for returning from helpers
  ARM: 7302/1: Add TLB flushing for both entries in a PMD
  ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15
  ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers
  ARM: 7307/1: vfp: fix ptrace regset modification race
  ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe
  Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"

mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration

When isolating for migration, migration starts at the start of a zone
which is not necessarily pageblock aligned.  Further, it stops isolating
when COMPACT_CLUSTER_MAX pages are isolated so migrate_pfn is generally
not aligned.  This allows isolate_migratepages() to call pfn_to_page() on
an invalid PFN which can result in a crash.  This was originally reported
against a 3.0-based kernel with the following trace in a crash dump.

PID: 9902   TASK: d47aecd0  CPU: 0   COMMAND: "memcg_process_s"
 #0 [d72d3ad0] crash_kexec at c028cfdb
 #1 [d72d3b24] oops_end at c05c5322
 #2 [d72d3b38] __bad_area_nosemaphore at c0227e60
 #3 [d72d3bec] bad_area at c0227fb6
 #4 [d72d3c00] do_page_fault at c05c72ec
 #5 [d72d3c80] error_code (via page_fault) at c05c47a4
    EAX: 00000000  EBX: 000c0000  ECX: 00000001  EDX: 00000807  EBP: 000c0000
    DS:  007b      ESI: 00000001  ES:  007b      EDI: f3000a80  GS:  6f50
    CS:  0060      EIP: c030b15a  ERR: ffffffff  EFLAGS: 00010002
 #6 [d72d3cb4] isolate_migratepages at c030b15a
 #7 [d72d3d14] zone_watermark_ok at c02d26cb
 #8 [d72d3d2c] compact_zone at c030b8de
 #9 [d72d3d68] compact_zone_order at c030bba1
#10 [d72d3db4] try_to_compact_pages at c030bc84
#11 [d72d3ddc] __alloc_pages_direct_compact at c02d61e7
#12 [d72d3e08] __alloc_pages_slowpath at c02d66c7
#13 [d72d3e78] __alloc_pages_nodemask at c02d6a97
#14 [d72d3eb8] alloc_pages_vma at c030a845
#15 [d72d3ed4] do_huge_pmd_anonymous_page at c03178eb
#16 [d72d3f00] handle_mm_fault at c02f36c6
#17 [d72d3f30] do_page_fault at c05c70ed
#18 [d72d3fb0] error_code (via page_fault) at c05c47a4
    EAX: b71ff000  EBX: 00000001  ECX: 00001600  EDX: 00000431
    DS:  007b      ESI: 08048950  ES:  007b      EDI: bfaa3788
    SS:  007b      ESP: bfaa36e0  EBP: bfaa3828  GS:  6f50
    CS:  0073      EIP: 080487c8  ERR: ffffffff  EFLAGS: 00010202

It was also reported by Herbert van den Bergh against 3.1-based kernel
with the following snippet from the console log.

BUG: unable to handle kernel paging request at 01c00008
IP: [<c0522399>] isolate_migratepages+0x119/0x390
*pdpt = 000000002f7ce001 *pde = 0000000000000000

It is expected that it also affects 3.2.x and current mainline.

The problem is that pfn_valid is only called on the first PFN being
checked and that PFN is not necessarily aligned.  Lets say we have a case
like this

H = MAX_ORDER_NR_PAGES boundary
| = pageblock boundary
m = cc->migrate_pfn
f = cc->free_pfn
o = memory hole

H------|------H------|----m-Hoooooo|ooooooH-f----|------H

The migrate_pfn is just below a memory hole and the free scanner is beyond
the hole.  When isolate_migratepages started, it scans from migrate_pfn to
migrate_pfn+pageblock_nr_pages which is now in a memory hole.  It checks
pfn_valid() on the first PFN but then scans into the hole where there are
not necessarily valid struct pages.

This patch ensures that isolate_migratepages calls pfn_valid when
necessary.
Reported-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Tested-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Herbert Poetzl reported a performance regression since 2.6.39.  The test
is a simple dd read, but with big block size.  The reason is:

T1: ra (A, A+128k), (A+128k, A+256k)
T2: lock_page for page A, submit the 256k
T3: hit page A+128K, ra (A+256k, A+384). the range isn't submitted
because of plug and there isn't any lock_page till we hit page A+256k
because all pages from A to A+256k is in memory
T4: hit page A+256k, ra (A+384, A+ 512). Because of plug, the range isn't
submitted again.
T5: lock_page A+256k, so (A+256k, A+512k) will be submitted. The task is
waitting for (A+256k, A+512k) finish.

There is no request to disk in T3 and T4, so readahead pipeline breaks.

We really don't need block plug for generic_file_aio_read() for buffered
I/O.  The readahead already has plug and has fine grained control when I/O
should be submitted.  Deleting plug for buffered I/O fixes the regression.

One side effect is plug makes the request size 256k, the size is 128k
without it.  This is because default ra size is 128k and not a reason we
need plug here.

Vivek said:

: We submit some readahead IO to device request queue but because of nested
: plug, queue never gets unplugged.  When read logic reaches a page which is
: not in page cache, it waits for page to be read from the disk
: (lock_page_killable()) and that time we flush the plug list.
:
: So effectively read ahead logic is kind of broken in parts because of
: nested plugging.  Removing top level plug (generic_file_aio_read()) for
: buffered reads, will allow unplugging queue earlier for readahead.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In function pre_handler_kretprobe(), the allocated kretprobe_instance
object will get leaked if the entry_handler callback returns non-zero.
This may cause all the preallocated kretprobe_instance objects exhausted.

This issue can be reproduced by changing
samples/kprobes/kretprobe_example.c to probe "mutex_unlock".  And the fix
is straightforward: just put the allocated kretprobe_instance object back
onto the free_instances list.

[akpm@linux-foundation.org: use raw_spin_lock/unlock]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland
with a 64bit kernel if the font width is not 8.

This is because of the setting of the KD_FONT_FLAG_OLD flag, which makes
con_font_get return EIO in such case.

This flag should *not* be set for KDFONTOP, since it's actually the whole
point of this flag (see comment in con_font_set for instance).
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Arthur Taylor <art@ified.ca>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lkdtm_do_action() may call sleeping functions like kmalloc(), so do not
call it with spin lock held.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a race condition that shows in conjunction with xip_file_fault() when
two threads of the same user process fault on the same memory page.

In this case, the race winner will install the page table entry and the
unlucky loser will cause an oops: xip_file_fault calls vm_insert_pfn (via
vm_insert_mixed) which drops out at this check:

	retval = -EBUSY;
	if (!pte_none(*pte))
		goto out_unlock;

The resulting -EBUSY return value will trigger a BUG_ON() in
xip_file_fault.

This fix simply considers the fault as fixed in this case, because the
race winner has successfully installed the pte.

[akpm@linux-foundation.org: use conventional (and consistent) comment layout]
Reported-by: David Sadler <dsadler@us.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reported-by: Louis Alex Eisner <leisner@cs.ucsd.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: In function 'memcg_check_events':
mm/memcontrol.c:779: warning: unused variable 'do_numainfo'
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hiroyuki KAMEZAWA <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Enable use of the generic atomic64 implementation on AVR32 platforms.
Without this the kernel fails to build as the architecture does not
provide its version.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Postpone resetting page->mapping until the final remove_migration_ptes().
Otherwise the expression PageAnon(migration_entry_to_page(entry)) does not
work.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Defining memscan() as memchr() is wrong, because the return values of
memscan() and memchr() are different when the character is not found.  So
use the generic memscan() implementation to fix this.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 07fe9977 ("lguest: move the lguest tool to the tools
directory") moved the files, update the patterns.  Sort F: patterns
alphabetically too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two commits moved files from staging to drivers/media/

commit d6ce55de ("[media] move cx25821 out of staging")
commit be304970 ("[media] move tm6000 to drivers/media/video")

Remove the sections.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 784a90c0 ("ARM i.MX: Merge i.MX5 support into mach-imx")
merged the files, remove the iMX5 section.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Amit Kucheria <amit.kucheria@canonical.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9be96f3f ("move fs/partitions to block/") moved the files,
update the patterns.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Trivial kmemleak bug-fixes:

 - Early logging doesn't stop when kmemleak is off by default.
 - Zero-size scanning areas should be ignored (currently it prints a
   warning).

* tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux:
  kmemleak: Disable early logging when kmemleak is off by default
  kmemleak: Only scan non-zero-size areas

sound fixes for 3.3-rc3

Most of commits are either regression fixes for varioud HD-audio
codecs or small ASoC fixes.  Also a trivial build fix is included.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Disable dynamic-power control for VIA as default
  ALSA: hda - Allow analog low-current mode when dynamic power-control is on
  ALSA: hda - Fix the logic to detect VIA analog low-current mode
  ALSA: hda - Check power-state before changing in patch_via.c
  ALSA: HDA: Fix duplicated output to more than one codec
  ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.
  ALSA: HDA: Remove quirk for Toshiba Qosmio G50
  ALSA: HDA: Fix jack creation for codecs with front and rear Line In
  ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660
  ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machine
  ALSA: Add #ifdef CONFIG_PCI guard for snd_pci_quirk_* functions
  ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixer
  ALSA: HDA: Remove quirk for Asus N53Jq
  ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs
  ASoC: wm5100: Mark register cache as dirty when regulators are disabled
  ASoC: wm8962: Mark register cache as dirty when regulators are disabled
  ASoC: wm8996: Mark register cache as dirty when regulators are disabled
  ASoC: wm5100: Fix microphone configuration
  ASoC: wm5100: Make sure we switch to button reporting mode

__kuser_cmpxchg64 has a return path using bx lr to get back to the caller.
This is actually ok since the code in question is predicated on
CONFIG_CPU_32v6K, but for the sake of consistency using the usr_ret
macro is probably better.
Acked-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

From 2d5a38a56453421e82428155f4b00303f3fb19b2 Mon Sep 17 00:00:00 2001
From: Igor Murzov <e-mail@date.by>
Date: Wed, 1 Feb 2012 03:11:53 +0400
Subject: [PATCH] Input: i8042 - add Lenovo Ideapad U455 to 'reset' blacklist

Lenovo Ideapad U455 needs to be in the reset quirk list for its
touchpad's proper function.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=40672Signed-off-by: Igor Murzov <e-mail@date.by>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix safety of rbd_put_client()
  rbd: fix a memory leak in rbd_get_client()
  ceph: create a new session lock to avoid lock inversion
  ceph: fix length validation in parse_reply_info()
  ceph: initialize client debugfs outside of monc->mutex
  ceph: change "ceph.layout" xattr to be "ceph.file.layout"

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped.  The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list.  It acquires node_lock
to do so, but the way it is done is still not safe.

The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.

Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:

 Thread on CPU A                | Thread on CPU B
 ---------------                | ---------------
 rbd_put_client(CLIENT)         | rbd_get_client()
   kref_put()                   |   (acquires node_lock)
     kref->refcount becomes 0   |   __rbd_client_find() returns CLIENT
     calls rbd_client_release() |   kref_get(&CLIENT->kref);
                                |   (releases node_lock)
       (acquires node_lock)     |
       deletes CLIENT from list | ...and starts using CLIENT...
       (releases node_lock)     |
       and frees CLIENT         | <-- but CLIENT gets freed here

Fix this by having rbd_put_client() acquire node_lock.  The result
could still be improved, but at least it avoids this problem.
Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

This fixes the race in process_vm_core found by Oleg (see

  http://article.gmane.org/gmane.linux.kernel/1235667/

for details).

This has been updated since I last sent it as the creation of the new
mm_access() function did almost exactly the same thing as parts of the
previous version of this patch did.

In order to use mm_access() even when /proc isn't enabled, we move it to
kernel/fork.c where other related process mm access functions already
are.
Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If an existing rbd client is found to be suitable for use in
rbd_get_client(), the rbd_options structure is not being
freed as it should.  Fix that.
Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Lockdep was reporting a possible circular lock dependency in
dentry_lease_is_valid().  That function needs to sample the
session's s_cap_gen and and s_cap_ttl fields coherently, but needs
to do so while holding a dentry lock.  The s_cap_lock field was
being used to protect the two fields, but that can't be taken while
holding a lock on a dentry within the session.

In most cases, the s_cap_gen and s_cap_ttl fields only get operated
on separately.  But in three cases they need to be updated together.
Implement a new lock to protect the spots updating both fields
atomically is required.
Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>