- 13 Dec, 2019 40 commits
-
-
Yuchung Cheng authored
[ Upstream commit 3976535a ] Previously there is an off-by-one bug on determining when to abort a stalled window-probing socket. This patch fixes that so it is consistent with tcp_write_timeout(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rob Herring authored
[ Upstream commit 7f4b001b ] There's a bug in dtc in checking for duplicate node names when there's another section (e.g. "/ { };"). In this case, skeleton.dtsi provides another section. Upon removal of skeleton.dtsi, the dtb fails to build due to a duplicate node 'fixedregulator@0'. As both nodes were pretty much the same 3.3V fixed regulator, it hasn't really mattered. Fix this by renaming the nodes to something unique. In the process, drop the unit-address which shouldn't be present wtihout reg property. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lubomir Rintel authored
[ Upstream commit 40058398 ] gpio-pxa uses two cell to encode the interrupt source: the pin number and the trigger type. Adjust the device node accordingly. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 85bdf7db ] Jean-Louis Dupond reported poor iscsi TCP receive performance that we tracked to backlog drops. Apparently we fail to send window updates reflecting the fact that we are under stress. Note that we might lack a proper window increase when backlog is fully processed, since __release_sock() clears sk->sk_backlog.len _after_ all skbs have been processed. This should not matter in practice. If we had a significant load through socket backlog, we are in a dangerous situation. Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Tested-by: Jean-Louis Dupond<jean-louis@dupond.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rob Herring authored
[ Upstream commit 70523a3c ] The updated version of dtc has a bug fix for simple_bus_reg warnings and lots of warnings are generated now. So disable this warning by default. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 160bfa7c ] The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) renamed the A3VIP power domain on R-Car V3H to A3VIP0, and clarified the power domain hierarchy for the A3VIP[012] power domains. As the definition for the A3VIP0 domain is not yet used from DT, it can just be renamed. Fixes: 7755b40d ("dt-bindings: power: add R8A77980 SYSC power domain definitions") Fixes: 41d6d8bd ("soc: renesas: rcar-sysc: add R8A77980 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 97473bc8 ] The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) renamed the A2PD0 and A2DP0 power domains on R-Car V3H to A2DP0 resp. A2DP1. As these definitions are not yet used from DT, they can just be renamed. Fixes: 7755b40d ("dt-bindings: power: add R8A77980 SYSC power domain definitions") Fixes: 41d6d8bd ("soc: renesas: rcar-sysc: add R8A77980 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit b5eb730e ] The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) renamed the A2IR2 and A2IR3 power domains on R-Car V3M to A2DP resp. A2CN. As these definitions are not yet used from DT, they can just be renamed. While at it, fix the indentation of the A3IR definition. Fixes: 833bdb47 ("dt-bindings: power: add R8A77970 SYSC power domain definitions") Fixes: bab9b2a7 ("soc: renesas: rcar-sysc: add R8A77970 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stephen Boyd authored
[ Upstream commit 553604c0 ] This function is called from driver probe, which isn't the same as __init code because driver probe can happen later. Drop the __init marking here to fix this potential problem. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Wenzhen Yu <wenzhen.yu@mediatek.com> Cc: Weiyi Lu <weiyi.lu@mediatek.com> Fixes: 2fc0a509 ("clk: mediatek: add clock support for MT7622 SoC") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stephen Boyd authored
commit 28f1186a upstream. This function is used from more places than just __init code. Removing __init silences a section mismatch warning here. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Wenzhen Yu <wenzhen.yu@mediatek.com> Cc: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yonghong Song authored
[ Upstream commit b4269954 ] During porting libbpf to bcc, I got some warnings like below: ... [ 2%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf.c.o /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf.c:12:0: warning: "_GNU_SOURCE" redefined [enabled by default] #define _GNU_SOURCE ... [ 3%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf_errno.c.o /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c: In function ‘libbpf_strerror’: /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c:45:7: warning: assignment makes integer from pointer without a cast [enabled by default] ret = strerror_r(err, buf, size); ... bcc is built with _GNU_SOURCE defined and this caused the above warning. This patch intends to make libpf _GNU_SOURCE friendly by . define _GNU_SOURCE in libbpf.c unless it is not defined . undefine _GNU_SOURCE as non-gnu version of strerror_r is expected. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Martin Schiller authored
[ Upstream commit 06137619 ] o x25_find_listener(): the compare for the null_x25_address was wrong. We have to check the x25_addr of the listener socket instead of the x25_addr of the incomming call. o x25_bind(): it was not possible to bind a socket to null_x25_address Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Martin Schiller authored
[ Upstream commit d449ba3d ] The length of the called and calling address was not calculated correctly (BCD encoding). Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Neil Armstrong authored
[ Upstream commit 5b780126 ] The gpio line names were set in the pinctrl node instead of the gpio node, at the time it was merged, it worked, but was obviously wrong. This patch moves the properties to the gpio nodes. Fixes: 60795933 ("ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Neil Armstrong authored
[ Upstream commit 2165b006 ] The gpio line names were set in the pinctrl node instead of the gpio node, at the time it was merged, it worked, but was obviously wrong. This patch moves the properties to the gpio nodes. Fixes: b03c7d64 ("ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Neil Armstrong authored
[ Upstream commit f0783f5e ] The gpio line names were set in the pinctrl node instead of the gpio node, at the time it was merged, it worked, but was obviously wrong. This patch moves the properties to the gpio nodes. Fixes: 12ada051 ("ARM64: dts: meson-gxbb-nanopi-k2: Add GPIO lines names") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Neil Armstrong authored
[ Upstream commit 11fa9774 ] The gpio line names were set in the pinctrl node instead of the gpio node, at the time it was merged, it worked, but was obviously wrong. This patch moves the properties to the gpio nodes. Fixes: 47884c5c ("ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Aaro Koskinen authored
[ Upstream commit 04a92358 ] Currently we get extra newlines on OMAP1/2 when the SoC name is printed: [ 0.000000] OMAP1510 [ 0.000000] revision 2 handled as 15xx id: bc058c9b93111a16 [ 0.000000] OMAP2420 [ 0.000000] Fix by using pr_cont. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Young_X authored
[ Upstream commit cd7fdc45 ] Add suffix ULL to constant 256 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: 256 * fs * 2 * mclk_src_scaling[i].param Signed-off-by: Young_X <YangX92@hotmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yonghong Song authored
[ Upstream commit 528bff0c ] Commit b12d6ec0 ("bpf: btf: add btf print functionality") added btf pretty print functionality to bpftool. There is a problem though in printing a bitfield whose type has modifiers. For example, for a type like typedef int ___int; struct tmp_t { int a:3; ___int b:3; }; Suppose we have a map struct bpf_map_def SEC("maps") tmpmap = { .type = BPF_MAP_TYPE_HASH, .key_size = sizeof(__u32), .value_size = sizeof(struct tmp_t), .max_entries = 1, }; and the hash table is populated with one element with key 0 and value (.a = 1 and .b = 2). In BTF, the struct member "b" will have a type "typedef" which points to an int type. The current implementation does not pass the bit offset during transition from typedef to int type, hence incorrectly print the value as $ bpftool m d id 79 [{ "key": 0, "value": { "a": 0x1, "b": 0x1 } } ] This patch fixed the issue by carrying bit_offset along the type chain during bit_field print. The correct result can be printed as $ bpftool m d id 76 [{ "key": 0, "value": { "a": 0x1, "b": 0x2 } } ] The kernel pretty print is implemented correctly and does not have this issue. Fixes: b12d6ec0 ("bpf: btf: add btf print functionality") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yonghong Song authored
[ Upstream commit eb04bbb6 ] This patch added name checking for the following types: . BTF_KIND_PTR, BTF_KIND_ARRAY, BTF_KIND_VOLATILE, BTF_KIND_CONST, BTF_KIND_RESTRICT: the name must be null . BTF_KIND_STRUCT, BTF_KIND_UNION: the struct/member name is either null or a valid identifier . BTF_KIND_ENUM: the enum type name is either null or a valid identifier; the enumerator name must be a valid identifier. . BTF_KIND_FWD: the name must be a valid identifier . BTF_KIND_TYPEDEF: the name must be a valid identifier For those places a valid name is required, the name must be a valid C identifier. This can be relaxed later if we found use cases for a different (non-C) frontend. Fixes: 69b693f0 ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yonghong Song authored
[ Upstream commit cdbb096a ] Function btf_name_valid_identifier() have been implemented in bpf-next commit 2667a262 ("bpf: btf: Add BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO"). Backport this function so later patch can use it. Fixes: 69b693f0 ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Scott Mayhew authored
[ Upstream commit b493fd31 ] __cld_pipe_upcall() emits a "do not call blocking ops when !TASK_RUNNING" warning due to the dput() call in rpc_queue_upcall(). Fix it by using a completion instead of hand coding the wait. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 81de0cd6 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Clément Péron authored
[ Upstream commit f6628486 ] Cyclone5 and Arria10 doesn't have the same memory map for UART1. Split the SOCFPGA_UART1 into 2 options to allow debugging on UART1 for Cyclone5. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wen Yang authored
[ Upstream commit f31a8969 ] kmem_cache_destroy(NULL) is safe, so removes NULL check before freeing the mem. This patch also fix ifnullfree.cocci warnings. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit 438a44ce ] All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit a858f569 ] DTC will emit a warning on our OPPs nodes for the common DTSI between the A23 and A33 since those nodes use the frequency as unit addresses, but don't have a matching reg property. Fix this by moving the frequency to the node name instead. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit 4d9a0697 ] Our HDMI output endpoint on the A10s DTSI has a warning under DTC: "graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary". Fix this by removing those properties. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Laurent Pinchart authored
[ Upstream commit 89862542 ] The LVDS0 encoder on Koelsh and Porter, and the LVDS1 encoder on Lager, are enabled in DT but have no device connected to their output. This result in spurious messages being printed to the kernel log such as rcar-du feb00000.display: no connector for encoder /soc/lvds@feb90000, skipping Fix it by disabling the encoders. Fixes: 15a1ff30 ("ARM: dts: r8a7790: Convert to new LVDS DT bindings") Fixes: e5c3f470 ("ARM: dts: r8a7791: Convert to new LVDS DT bindings") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit ed5fc60b ] Our HDMI output endpoint on the A10s DTSI has a warning under DTC: "graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary". Fix this by removing those properties. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit 123b796d ] Our HDMI output endpoint on the A10 DTSI has a warning under DTC: "graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary". Fix this by removing those properties. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit c9b54340 ] Fix the 'unnecessary #address-cells/#size-cells without "ranges" or child "reg" property' DTC warning for the gpio-keys DT node on A10 boards. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuninori Morimoto authored
[ Upstream commit 9c698e84 ] Current rsnd dvc.c is using flags to avoid duplicating register for MIXer case. OTOH, commit e894efef ("ASoC: core: add support to card rebind") allows to rebind sound card without rebinding all drivers. Because of above patch and dvc.c flags, it can't re-register kctrl if only sound card was rebinded, because dvc is keeping old flags. (Of course it will be no problem if rsnd driver also be rebinded, but it is not purpose of above patch). This patch checks current card registered kctrl when registering. In MIXer case, it can avoid duplicate register if card already has same kctrl. In rebind case, it can re-register kctrl because card registered kctl had been removed when unbinding. This patch is updated version of commit b918f1bc ("ASoC: rsnd: DVC kctrl sets once") Reported-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Joerg Roedel authored
[ Upstream commit 1a21ee1a ] With the switch to dev_err for reporting errors from the iommu log there was an unwanted newline introduced. The reason was that the reporting was done in multiple dev_err() calls, and dev_err adds a newline after every call. Fix it by printing the log messages with only one dev_err() call. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 0d32f177 ] I changed to count sk_wmem_alloc by skb truesize instead of 1 to fix the sk_wmem_alloc leak caused by later truesize's change in xfrm in Commit 02968ccf ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit"). But I should have also increased sk_wmem_alloc when head->truesize is increased in sctp_packet_gso_append() as xfrm does. Otherwise, sctp gso packet will cause sk_wmem_alloc underflow. Fixes: 02968ccf ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
J. Bruce Fields authored
[ Upstream commit b8db1592 ] We fail to advance the read pointer when reading the stat.oh field that identifies the lock-holder in a TEST result. This turns out not to matter if the server is knfsd, which always returns a zero-length field. But other servers (Ganesha is an example) may not do this. The result is bad values in fcntl F_GETLK results. Fix this. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Thierry Reding authored
[ Upstream commit 2fc777ba ] The number of syncpoints on Tegra186 is 576 and therefore no longer fits into 8 bits. Increase the size of the syncpoint ID field to 10 in order to accomodate all syncpoints. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Neil Armstrong authored
[ Upstream commit 21310c39 ] The GXL Documentation specifies 12 bits for the Fractional bit field, bit the last bits have a different purpose that we cannot handle right now, so update the bitwidth to have correct fractional calculations. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: added comment on GXL HHI_HDMI_PLL_CNTL register shift] Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lkml.kernel.org/r/20181121111922.1277-1-narmstrong@baylibre.comSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Lucas Stach authored
[ Upstream commit fece4978 ] Probe deferral is a normal operating condition in the probe function, so don't spam the log with an error in this case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-