1. 08 May, 2008 12 commits
  2. 07 May, 2008 5 commits
  3. 06 May, 2008 23 commits
    • David S. Miller's avatar
      sparc64: Fix initrd regression. · d45100f7
      David S. Miller authored
      We die because we forget to convert initrd_start and
      initrd_end to virtual addresses.
      
      Reported by Mikael Pettersson
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d45100f7
    • David S. Miller's avatar
      usb: Sparc build fix, make USB_ISP1760_OF depend on PPC_OF · 3eb6753e
      David S. Miller authored
      Sparc doesn't have some of the OF interfaces this driver
      wants to use.
      Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3eb6753e
    • OGAWA Hirofumi's avatar
      Fix bogus warning in sysdev_driver_register() · db176c6e
      OGAWA Hirofumi authored
              if ((drv->entry.next != drv->entry.prev) ||
                  (drv->entry.next != NULL)) {
      
      warns list_empty(&drv->entry).
      Signed-off-by: default avatarOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
      Cc: Greg KH <gregkh@suse.de>
      Cc: Len Brown <lenb@kernel.org>
      [ Version 2 totally redone based on suggestions from Linus & Greg ]
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      db176c6e
    • Linus Torvalds's avatar
      VFS: fix unused variable warning · 6ce07c7b
      Linus Torvalds authored
      Commit 33dcdac2 ("kill ->put_inode")
      removed the final use of i_op->put_inode, but left the now totally
      unused "op" variable in iput().
      
      Get rid of it.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6ce07c7b
    • Hugh Dickins's avatar
      x86: fix PAE pmd_bad bootup warning · aeed5fce
      Hugh Dickins authored
      Fix warning from pmd_bad() at bootup on a HIGHMEM64G HIGHPTE x86_32.
      
      That came from 9fc34113 x86: debug pmd_bad();
      but we understand now that the typecasting was wrong for PAE in the previous
      version: pagetable pages above 4GB looked bad and stopped Arjan from booting.
      
      And revert that cded932b x86: fix pmd_bad
      and pud_bad to support huge pages.  It was the wrong way round: we shouldn't
      weaken every pmd_bad and pud_bad check to let huge pages slip through - in
      part they check that we _don't_ have a huge page where it's not expected.
      
      Put the x86 pmd_bad() and pud_bad() definitions back to what they have long
      been: they can be improved (x86_32 should use PTE_MASK, to stop PAE thinking
      junk in the upper word is good; and x86_64 should follow x86_32's stricter
      comparison, to stop thinking any subset of required bits is good); but that
      should be a later patch.
      
      Fix Hans' good observation that follow_page() will never find pmd_huge()
      because that would have already failed the pmd_bad test: test pmd_huge in
      between the pmd_none and pmd_bad tests.  Tighten x86's pmd_huge() check?
      No, once it's a hugepage entry, it can get quite far from a good pmd: for
      example, PROT_NONE leaves it with only ACCESSED of the KERN_PGTABLE bits.
      
      However... though follow_page() contains this and another test for huge
      pages, so it's nice to keep it working on them, where does it actually get
      called on a huge page?  get_user_pages() checks is_vm_hugetlb_page(vma) to
      to call alternative hugetlb processing, as does unmap_vmas() and others.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Earlier-version-tested-by: default avatarIngo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Jeff Chua <jeff.chua.linux@gmail.com>
      Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
      Cc: Arjan van de Ven <arjan@linux.intel.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      aeed5fce
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 · bb78be83
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
        [PATCH] fix SMP ordering hole in fcntl_setlk()
        [PATCH] kill ->put_inode
        [PATCH] fix reservation discarding in affs
      bb78be83
    • Al Viro's avatar
      [PATCH] fix SMP ordering hole in fcntl_setlk() · 0b2bac2f
      Al Viro authored
      fcntl_setlk()/close() race prevention has a subtle hole - we need to
      make sure that if we *do* have an fcntl/close race on SMP box, the
      access to descriptor table and inode->i_flock won't get reordered.
      
      As it is, we get STORE inode->i_flock, LOAD descriptor table entry vs.
      STORE descriptor table entry, LOAD inode->i_flock with not a single
      lock in common on both sides.  We do have BKL around the first STORE,
      but check in locks_remove_posix() is outside of BKL and for a good
      reason - we don't want BKL on common path of close(2).
      
      Solution is to hold ->file_lock around fcheck() in there; that orders
      us wrt removal from descriptor table that preceded locks_remove_posix()
      on close path and we either come first (in which case eviction will be
      handled by the close side) or we'll see the effect of close and do
      eviction ourselves.  Note that even though it's read-only access,
      we do need ->file_lock here - rcu_read_lock() won't be enough to
      order the things.
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      0b2bac2f
    • Christoph Hellwig's avatar
      [PATCH] kill ->put_inode · 33dcdac2
      Christoph Hellwig authored
      And with that last patch to affs killing the last put_inode instance we
      can finally, after many years of transition kill this racy and awkward
      interface.
      
      (It's kinda funny that even the description in
      Documentation/filesystems/vfs.txt was entirely wrong..)
      
      Also remove a very misleading comment above the defintion of
      struct super_operations.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      33dcdac2
    • Roman Zippel's avatar
      [PATCH] fix reservation discarding in affs · dca3c336
      Roman Zippel authored
      - remove affs_put_inode, so preallocations aren't discared unnecessarily
        often.
      - remove affs_drop_inode, it's called with a spinlock held, so it can't
        use a mutex.
      - make i_opencnt atomic
      - avoid direct b_count manipulations
      - a few allocation failure fixes, so that these are more gracefully
        handled now.
      Signed-off-by: default avatarRoman Zippel <zippel@linux-m68k.org>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      dca3c336
    • Linus Torvalds's avatar
      Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev · 31d9168d
      Linus Torvalds authored
      * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (27 commits)
        pata_atiixp: Don't disable
        sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
        sata_inic162x: add cardbus support
        sata_inic162x: kill now unused SFF related stuff
        sata_inic162x: use IDMA for ATAPI commands
        sata_inic162x: use IDMA for non DMA ATA commands
        sata_inic162x: kill now unused bmdma related stuff
        sata_inic162x: use IDMA for ATA_PROT_DMA
        sata_inic162x: update TF read handling
        sata_inic162x: add / update constants
        sata_inic162x: misc clean ups
        sata_mv use hweight16() for bit counting (V2)
        sata_mv NCQ-EH for FIS-based switching
        sata_mv delayed eh handling
        libata: export ata_eh_analyze_ncq_error
        sata_mv new mv_port_intr function
        sata_mv fix mv_host_intr bug for hc_irq_cause
        sata_mv NCQ and SError fixes for mv_err_intr
        sata_mv rearrange mv_config_fbs
        sata_mv errata workaround for sata25 part 1
        ...
      31d9168d
    • Alan Cox's avatar
      pata_atiixp: Don't disable · 05177f17
      Alan Cox authored
      A couple of distributions (Fedora, Ubuntu) were having weird problems with the
      ATI IXP series PATA controllers being reported as simplex.  At the heart of
      the problem is that both distros ignored the recommendations to load pata_acpi
      and ata_generic *AFTER* specific host drivers.
      
      The underlying cause however is that if you D3 and then D0 an ATI IXP it
      helpfully throws away some configuration and won't let you rewrite it.
      
      Add checks to ata_generic and pata_acpi to pin ATIIXP devices.  Possibly the
      real answer here is to quirk them and pin them, but right now we can't do that
      before they've been pcim_enable()'d by a driver.
      
      I'm indebted to David Gero for this.  His bug report not only reported the
      problem but identified the cause correctly and he had tested the right values
      to prove what was going on
      
      [If you backport this for 2.6.24 you will need to pull in the 2.6.25
      removal of the bogus WARN_ON() in pcim_enagle]
      Signed-off-by: default avatarAlan Cox <alan@redhat.com>
      Tested-by: default avatarDavid Gero <davidg@havidave.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      05177f17
    • Tejun Heo's avatar
      sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL · 22bfc6d5
      Tejun Heo authored
      sata_inic162x is now ready for production use.  Bump the version,
      explain what's working and what's not and drop EXPERIMENTAL.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      22bfc6d5
    • Tejun Heo's avatar
      sata_inic162x: add cardbus support · ba66b242
      Tejun Heo authored
      When attached to cardbus, mmio region is at BAR 1.  Other than that,
      everything else is the same.  Add support for it.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      ba66b242
    • Tejun Heo's avatar
      sata_inic162x: kill now unused SFF related stuff · f8b0685a
      Tejun Heo authored
      sata_inic162x now doesn't use any SFF features.  Remove all SFF
      related stuff.
      
      * Mask unsolicited ATA interrupts.  This removes our primary source of
        spurious interrupts and spurious interrupt handling can be tightened
        up.  There's no need to clear ATA interrupts by reading status
        register either.
      
      * Don't dance with IDMA_CTL_ATA_NIEN and simplify accesses to
        IDMA_CTL.
      
      * Inherit from sata_port_ops instead of ata_sff_port_ops.
      
      * Don't initialize or use ioaddr.  There's no need to map BAR0-4
        anymore.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      f8b0685a
    • Tejun Heo's avatar
      sata_inic162x: use IDMA for ATAPI commands · b3f677e5
      Tejun Heo authored
      Use IDMA for ATAPI commands.  Write and some misc commands time out
      when executed using ATAPI_PROT_DMA but ATAPI_PROT_PIO works fine.  As
      PIO is driven by DMA too, it doesn't make any noticeable difference
      for native SATA devices.  inic_check_atapi_dma() is implemented to
      force PIO for those ATAPI commands.
      
      After this change, sata_inic162x issues all commands using IDMA.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      b3f677e5
    • Tejun Heo's avatar
      sata_inic162x: use IDMA for non DMA ATA commands · 049e8e04
      Tejun Heo authored
      Use IDMA for PIO and non-data commands.  This allows sata_inic162x to
      safely drive LBA48 devices.  Kill inic_dev_config() which contains
      code to reject LBA48 devices.
      
      With this change, status checking in inic_qc_issue() to avoid hard
      lock up after hotplug can go away too.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      049e8e04
    • Tejun Heo's avatar
      sata_inic162x: kill now unused bmdma related stuff · ab5b0235
      Tejun Heo authored
      sata_inic162x doesn't use BMDMA anymore.  Kill bmdma related stuff.
      
      * prdctl manipulation
      
      * port IRQ mask manipulation
      
      * inherit ATA_BASE_SHT instead of ATA_BMDMA_SHT
      
      * BMDMA methods
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      ab5b0235
    • Tejun Heo's avatar
      sata_inic162x: use IDMA for ATA_PROT_DMA · 3ad400a9
      Tejun Heo authored
      The modified driver on initio site has enough clue on how to use IDMA.
      Use IDMA for ATA_PROT_DMA.
      
      * LBA48 now works as long as it uses DMA (LBA48 devices still aren't
        allowed as it can destroy data if PIO is used for any reason).
      
      * No need to mask IRQs for read DMAs as IDMA_DONE is properly raised
        after transfer to memory is actually completed.  There will be some
        spurious interrupts but host_intr will handle it correctly and
        manipulating port IRQ mask interacts badly with the other port for
        some reason, so command type dependent port IRQ masking is not used
        anymore.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      3ad400a9
    • Tejun Heo's avatar
      sata_inic162x: update TF read handling · 364fac0e
      Tejun Heo authored
      inic162x can't reliably read back TF or at least we don't know how to
      do it yet.  The only values which seem reliable are status and error.
      This patch updates access to TF.
      
      * implement inic_tf_read() which reads the TF area in mmio area
      
      * implement custom inic_qc_fill_rtf() which only returns true if
        status indicates device error.  it'll be returning bogus addresses
        for device errors but it'll be able to report why it failed at
        least.
      
      * implement custom inic_check_ready() and use ata_wait_after_reset()
        instead of the SFF version.
      
      * use inic_tf_read() for classification.
      
      This is not perfect but it fixes hotplug detection failure and at
      least makes the driver report 0's instead of random garbages while
      reporting valid status and error for device errors.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      364fac0e
    • Tejun Heo's avatar
      sata_inic162x: add / update constants · b0dd9b8e
      Tejun Heo authored
      * add a bunch of constants, most are from the datasheet, a few
        undocumented ones are from initio's modified driver
      
      * HCTL_PWRDWN is bit 12 not 13
      
      This is in preparation of further inic162x updates.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      b0dd9b8e
    • Tejun Heo's avatar
      sata_inic162x: misc clean ups · 36f674d9
      Tejun Heo authored
      * use larger indents for structure member definitions
      
      * kill unused variable @addr in inic_scr_write()
      
      * kill unnecessary flushes in inic_freeze/thaw()
      
      * kill buggy explicit kfree() on devres managed port private data
      
      This is in preparation of further inic162x updates.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      36f674d9
    • Mark Lord's avatar
      sata_mv use hweight16() for bit counting (V2) · c46938cc
      Mark Lord authored
      Some tidying as suggested by Grant Grundler.
      
      Nuke local bit-counting function from sata_mv in favour of using hweight16().
      Also add a short explanation for the 15msec timeout used when waiting for empty/idle.
      Signed-off-by: default avatarMark Lord <mlord@pobox.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      c46938cc
    • Mark Lord's avatar
      sata_mv NCQ-EH for FIS-based switching · 4c299ca3
      Mark Lord authored
      Convert sata_mv's EH for FIS-based switching (FBS) over to the
      sequence recommended by Marvell.  This enables us to catch/analyze
      multiple failed links on a port-multiplier when using NCQ.
      
      To do this, we clear the ERR_DEV bit in the EDMA Halt-Conditions register,
      so that the EDMA engine doesn't self-disable on the first NCQ error.
      
      Our EH code sets the MV_PP_FLAG_DELAYED_EH flag to prevent new commands
      being queued while we await completion of all outstanding NCQ commands
      on all links of the failed PM.
      
      The SATA Test Control register tells us which links have failed,
      so we must only wait for any other active links to finish up
      before we stop the EDMA and run the .error_handler afterward.
      
      The patch also includes skeleton code for handling of non-NCQ FBS operation.
      This is more for documentation purposes right now, as that mode is not yet
      enabled in sata_mv.
      Signed-off-by: default avatarMark Lord <mlord@pobox.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      4c299ca3