This contains key material in crypto_send_aes_gcm_128 and
crypto_recv_aes_gcm_128.

Introduce union tls_crypto_context, and replace the two identical
unions directly embedded in struct tls_context with it. We can then
use this union to clean up the memory in the new tls_ctx_free()
function.

Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no need to copy the key to an on-stack buffer before calling
crypto_aead_setkey().

Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update 'confirmed' timestamp when ARP packet is received. It shouldn't
affect locktime logic and anyway entry can be confirmed by any higher-layer
protocol. Thus it makes sense to confirm it when ARP packet is received.

Fixes: 77d71233 ("neighbour: update neigh timestamps iff update is effective")
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071

Commit 5025f7f7 wrongly relied on __dev_change_flags to notify users of
dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED.
Fix it by indicating flag changes explicitly to __dev_notify_flags.

Fixes: 5025f7f7 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link")
Reported-By: Liam mcbirnie <liam.mcbirnie@boeing.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fields ->dev and ->next of struct ipddp_route may be copied to
userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible
to CAP_NET_ADMIN though. Let's manually copy the relevant fields
instead of using memcpy().

BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

When netvsc device is removed it can call reschedule in RCU context.
This happens because canceling the subchannel setup work could (in theory)
cause a reschedule when manipulating the timer.

To reproduce, run with lockdep enabled kernel and unbind
a network device from hv_netvsc (via sysfs).

[  160.682011] WARNING: suspicious RCU usage
[  160.707466] 4.19.0-rc3-uio+ #2 Not tainted
[  160.709937] -----------------------------
[  160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section!
[  160.723691]
[  160.723691] other info that might help us debug this:
[  160.723691]
[  160.730955]
[  160.730955] rcu_scheduler_active = 2, debug_locks = 1
[  160.762813] 5 locks held by rebind-eth.sh/1812:
[  160.766851]  #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0
[  160.773416]  #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0
[  160.783766]  #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0
[  160.787465]  #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250
[  160.816987]  #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc]
[  160.828629]
[  160.828629] stack backtrace:
[  160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2
[  160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012
[  160.832952] Call Trace:
[  160.832952]  dump_stack+0x85/0xcb
[  160.832952]  ___might_sleep+0x1a3/0x240
[  160.832952]  __flush_work+0x57/0x2e0
[  160.832952]  ? __mutex_lock+0x83/0x990
[  160.832952]  ? __kernfs_remove+0x24f/0x2e0
[  160.832952]  ? __kernfs_remove+0x1b2/0x2e0
[  160.832952]  ? mark_held_locks+0x50/0x80
[  160.832952]  ? get_work_pool+0x90/0x90
[  160.832952]  __cancel_work_timer+0x13c/0x1e0
[  160.832952]  ? netvsc_remove+0x1e/0x250 [hv_netvsc]
[  160.832952]  ? __lock_is_held+0x55/0x90
[  160.832952]  netvsc_remove+0x9a/0x250 [hv_netvsc]
[  160.832952]  vmbus_remove+0x26/0x30
[  160.832952]  device_release_driver_internal+0x18a/0x250
[  160.832952]  unbind_store+0xb4/0x180
[  160.832952]  kernfs_fop_write+0x113/0x1a0
[  160.832952]  __vfs_write+0x36/0x1a0
[  160.832952]  ? rcu_read_lock_sched_held+0x6b/0x80
[  160.832952]  ? rcu_sync_lockdep_assert+0x2e/0x60
[  160.832952]  ? __sb_start_write+0x141/0x1a0
[  160.832952]  ? vfs_write+0x184/0x1b0
[  160.832952]  vfs_write+0xbe/0x1b0
[  160.832952]  ksys_write+0x55/0xc0
[  160.832952]  do_syscall_64+0x60/0x1b0
[  160.832952]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  160.832952] RIP: 0033:0x7fe48f4c8154

Resolve this by getting RTNL earlier. This is safe because the subchannel
work queue does trylock on RTNL and will detect the race.

Fixes: 7b2ee50c ("hv_netvsc: common detach logic")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we delete a chain of filters, we need to notify
user-space we are deleting each filters in this chain
too.

Fixes: 32a4f5ec ("net: sched: introduce chain object to uapi")
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 57f230ab ("xen/netfront: raise max number of slots in
xennet_get_responses()") raised the max number of allowed slots by one.
This seems to be problematic in some configurations with netback using
a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS
defined as 18 instead of nowadays 17).

Instead of BUG_ON() in this case just fall back to retransmission.

Fixes: 57f230ab ("xen/netfront: raise max number of slots in xennet_get_responses()")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In inet6_rtm_getroute, since Commit 93531c67 ("net/ipv6: separate
handling of FIB entries from dst based routes"), it has used rt->from
to dump route info instead of rt.

However for some route like cache, some of its information like flags
or gateway is not the same as that of the 'from' one. It caused 'ip
route get' to dump the wrong route information.

In Jianlin's testing, the output information even lost the expiration
time for a pmtu route cache due to the wrong fib6_flags.

So change to use rt6_info members for dst addr, src addr, flags and
gateway when it tries to dump a route entry without fibmatch set.

v1->v2:
  - not use rt6i_prefsrc.
  - also fix the gw dump issue.

Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm nouveau fixes from Dave Airlie:
 "I'm sending this separately as it's a bit larger than I generally like
  for one driver, but it does contain a bunch of make my nvidia laptop
  not die (runpm) and a bunch to make my docking station and monitor
  display stuff (mst) fixes.

  Lyude has spent a lot of time on these, and we are putting the fixes
  into distro kernels as well asap, as it helps a bunch of standard
  Lenovo laptops, so I'm fairly happy things are better than they were
  before these patches, but I decided to split them out just for
  clarification"

* tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels
  drm/nouveau/disp: fix DP disable race
  drm/nouveau/disp: move eDP panel power handling
  drm/nouveau/disp: remove unused struct member
  drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS
  drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer
  drm/nouveau: fix oops in client init failure path
  drm/nouveau: Fix nouveau_connector_ddc_detect()
  drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload
  drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early
  drm/nouveau: Reset MST branching unit before enabling
  drm/nouveau: Only write DP_MSTM_CTRL when needed
  drm/nouveau: Remove useless poll_enable() call in drm_load()
  drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state()
  drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state()
  drm/nouveau: Fix deadlocks in nouveau_connector_detect()
  drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()
  drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests
  drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend()
  drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement

Pull networking fixes from David Miller:

 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
    and Florian Westphal.

 2) Memory leak in be2net driver, from Petr Oros.

 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.

 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.

 5) tipc_release() needs to orphan the sock, from Cong Wang.

 6) Need to program TxConfig register after TX/RX is enabled in r8169
    driver, not beforehand, from Maciej S. Szmigiero.

 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.

 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.

 9) syzbot can create conditions where kernel log is flooded with
    synflood warnings due to creation of many listening sockets, fix
    that. From Willem de Bruijn.

10) Fix RCU issues in rds socket layer, from Cong Wang.

11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
  nfp: flower: fix vlan match by checking both vlan id and vlan pcp
  tipc: check return value of __tipc_dump_start()
  s390/qeth: don't dump past end of unknown HW header
  s390/qeth: use vzalloc for QUERY OAT buffer
  s390/qeth: switch on SG by default for IQD devices
  s390/qeth: indicate error when netdev allocation fails
  rds: fix two RCU related problems
  r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
  erspan: fix error handling for erspan tunnel
  erspan: return PACKET_REJECT when the appropriate tunnel is not found
  tcp: rate limit synflood warnings further
  MIPS: lantiq: dma: add dev pointer
  netfilter: xt_hashlimit: use s->file instead of s->private
  netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
  netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
  netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
  netfilter: conntrack: reset tcp maxwin on re-register
  qmi_wwan: Support dynamic config on Quectel EP06
  ethernet: renesas: convert to SPDX identifiers
  ...

Jakub Kicinski says:

====================
nfp: flower: fixes for flower offload

Two fixes for flower matching and tunnel encap.  Pieter fixes
VLAN matching if the entire VLAN id is masked out and match
is only performed on the PCP field.  Louis adds validation of
tunnel flags for encap, most importantly we should not offload
actions on IPv6 tunnels if it's not supported.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a bug where ipv6 tunnels would report that it is
getting offloaded to hardware but would actually be rejected
by hardware.

Fixes: b27d6a95 ("nfp: compile flower vxlan tunnel set actions")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously we only checked if the vlan id field is present when trying
to match a vlan tag. The vlan id and vlan pcp field should be treated
independently.

Fixes: 5571e8c9 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When __tipc_dump_start() fails with running out of memory,
we have no reason to continue, especially we should avoid
calling tipc_dump_done().

Fixes: 8f5c5fcf ("tipc: call start and done ops directly in __tipc_nl_compat_dumpit()")
Reported-and-tested-by: syzbot+3f8324abccfbf8c74a9f@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2018-09-12

please apply the following qeth fixes for -net.

Patch 1 resolves a regression in an error path, while patch 2 enables
the SG support by default that was newly introduced with 4.19.
Patch 3 takes care of a longstanding problem with large-order
allocations, and patch 4 fixes a potential out-of-bounds access.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For inbound data with an unsupported HW header format, only dump the
actual HW header. We have no idea how much payload follows it, and what
it contains. Worst case, we dump past the end of the Inbound Buffer and
access whatever is located next in memory.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth_query_oat_command() currently allocates the kernel buffer for
the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with
fragmented memory, large allocations may fail (eg. the qethqoat tool by
default uses 132KB).

Solve this issue by using vzalloc, backing the allocation with
non-contiguous memory.
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Scatter-gather transmit brings a nice performance boost. Considering the
rather large MTU sizes at play, it's also totally the Right Thing To Do.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bailing out on allocation error is nice, but we also need to tell the
ccwgroup core that creating the qeth groupdev failed.

Fixes: d3d1b205 ("s390/qeth: allocate netdevice early")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fix from Palmer Dabbelt:
 "This contains what I hope to be the last RISC-V patch for 4.19.

  It fixes a bug in our initramfs support by removing some broken and
  obselete code"

* tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  riscv: Do not overwrite initrd_start and initrd_end

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers (qedi and iscsi target) so no wider impact
  even if the code changes are a bit extensive"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Add the CRC size within iSCSI NVM image
  scsi: iscsi: target: Fix conn_ops double free
  scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails

When a rds sock is bound, it is inserted into the bind_hash_table
which is protected by RCU. But when releasing rds sock, after it
is removed from this hash table, it is freed immediately without
respecting RCU grace period. This could cause some use-after-free
as reported by syzbot.

Mark the rds sock with SOCK_RCU_FREE before inserting it into the
bind_hash_table, so that it would be always freed after a RCU grace
period.

The other problem is in rds_find_bound(), the rds sock could be
freed in between rhashtable_lookup_fast() and rds_sock_addref(),
so we need to extend RCU read lock protection in rds_find_bound()
to close this race condition.

Reported-and-tested-by: syzbot+8967084bcac563795dc6@syzkaller.appspotmail.com
Reported-by: syzbot+93a5839deb355537440f@syzkaller.appspotmail.com
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: rds-devel@oss.oracle.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oarcle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After system suspend, sometimes the r8169 doesn't work when ethernet
cable gets pluggued.

This issue happens because rtl_reset_work() doesn't get called from
rtl8169_runtime_resume(), after system suspend.

In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is
met:
if (!netif_running(dev) ||
    !test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags))
    ...

If RTL_FLAG_TASK_ENABLED was cleared during system suspend while
RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't
schedule task as the flag is still there.

So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other
flags.

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When processing icmp unreachable message for erspan tunnel, tunnel id
should be erspan_net_id instead of ipgre_net_id.

Fixes: 84e54fe0 ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If erspan tunnel hasn't been established, we'd better send icmp port
unreachable message after receive erspan packets.

Fixes: 84e54fe0 ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert pr_info to net_info_ratelimited to limit the total number of
synflood warnings.

Commit 946cedcc ("tcp: Change possible SYN flooding messages")
rate limits synflood warnings to one per listener.

Workloads that open many listener sockets can still see a high rate of
log messages. Syzkaller is one frequent example.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dma_zalloc_coherent() now crashes if no dev pointer is given.
Add a dev pointer to the ltq_dma_channel structure and fill it in the
driver using it.

This fixes a bug introduced in kernel 4.19.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for you net tree:

1) Remove duplicated include at the end of UDP conntrack, from Yue Haibing.

2) Restore conntrack dependency on xt_cluster, from Martin Willi.

3) Fix splat with GSO skbs from the checksum target, from Florian Westphal.

4) Rework ct timeout support, the template strategy to attach custom timeouts
   is not correct since it will not work in conjunction with conntrack zones
   and we have a possible free after use when removing the rule due to missing
   refcounting. To fix these problems, do not use conntrack template at all
   and set custom timeout on the already valid conntrack object. This
   fix comes with a preparation patch to simplify timeout adjustment by
   initializating the first position of the timeout array for all of the
   existing trackers. Patchset from Florian Westphal.

5) Fix missing dependency on from IPv4 chain NAT type, from Florian.

6) Release chain reference counter from the flush path, from Taehee Yoo.

7) After flushing an iptables ruleset, conntrack hooks are unregistered
   and entries are left stale to be cleaned up by the timeout garbage
   collector. No TCP tracking is done on established flows by this time.
   If ruleset is reloaded, then hooks are registered again and TCP
   tracking is restored, which considers packets to be invalid. Clear
   window tracking to exercise TCP flow pickup from the middle given that
   history is lost for us. Again from Florian.

8) Fix crash from netlink interface with CONFIG_NF_CONNTRACK_TIMEOUT=y
   and CONFIG_NF_CT_NETLINK_TIMEOUT=n.

9) Broken CT target due to returning incorrect type from
   ctnl_timeout_find_get().

10) Solve conntrack clash on NF_REPEAT verdicts too, from Michal Vaner.

11) Missing conversion of hashlimit sysctl interface to new API, from
    Cong Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull HID fixes from Jiri Kosina:

 - functional regression fix for sensor-hub driver from Hans de Goede

 - stop doing device reset for i2c-hid devices, which unbreaks some of
   them (and is in line with the specification), from Kai-Heng Feng

 - error handling fix for hid-core from Gustavo A. R. Silva

 - functional regression fix for some Elan panels from Benjamin
   Tissoires

 - a few new device ID additions and misc small fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: Don't reset device upon system resume
  HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report
  HID: core: fix NULL pointer dereference
  HID: core: fix grouping by application
  HID: multitouch: fix Elan panels with 2 input modes declaration
  HID: hid-saitek: Add device ID for RAT 7 Contagion
  HID: core: fix memory leak on probe
  HID: input: fix leaking custom input node name
  HID: add support for Apple Magic Keyboards
  HID: i2c-hid: Fix flooded incomplete report after S3 on Rayd touchscreen
  HID: intel-ish-hid: Enable Sunrise Point-H ish driver

Pull rdma fixes from Jason Gunthorpe:
 "This fixes one major regression with NFS and mlx4 due to the max_sg
  rework in this merge window, tidies a few minor error_path
  regressions, and various small fixes.

  The HFI1 driver is broken this cycle due to a regression caused by a
  PCI change, it is looking like Bjorn will merge a fix for this. Also,
  the lingering ipoib issue I mentioned earlier still remains unfixed.

  Summary:

   - Fix possible FD type confusion crash

   - Fix a user trigger-able crash in cxgb4

   - Fix bad handling of IOMMU resources causing user controlled leaking
     in bnxt

   - Add missing locking in ipoib to fix a rare 'stuck tx' situation

   - Add missing locking in cma

   - Add two missing missing uverbs cleanups on failure paths,
     regressions from this merge window

   - Fix a regression from this merge window that caused RDMA NFS to not
     work with the mlx4 driver due to the max_sg changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx4: Ensure that maximal send/receive SGE less than supported by HW
  RDMA/cma: Protect cma dev list with lock
  RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one()
  bnxt_re: Fix couple of memory leaks that could lead to IOMMU call traces
  IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler
  iw_cxgb4: only allow 1 flush on user qps
  IB/core: Release object lock if destroy failed
  RDMA/ucma: check fd type in ucma_migrate_id()

A bunch of fixes for MST/runpm problems and races, as well as fixes
for issues that prevent more recent laptops from booting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==GF63dy8a9j611=-0x8G6FRu7uC-ZQypsLO_hqV4OAcA@mail.gmail.com

After switching to the new procfs API, it is supposed to
retrieve the private pointer from PDE_DATA(file_inode(s->file)),
s->private is no longer referred.

Fixes: 1cd67182 ("netfilter/x_tables: switch to proc_create_seq_private")
Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

NF_REPEAT places the packet at the beginning of the iptables chain
instead of accepting or rejecting it right away. The packet however will
reach the end of the chain and continue to the end of iptables
eventually, so it needs the same handling as NF_ACCEPT and NF_DROP.

Fixes: 368982cd ("netfilter: nfnetlink_queue: resolve clash for unconfirmed conntracks")
Signed-off-by: Michal 'vorner' Vaner <michal.vaner@avast.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Compiler did not catch incorrect typing in the rcu hook assignment.

 % nfct add timeout test-tcp inet tcp established 100 close 10 close_wait 10
 % iptables -I OUTPUT -t raw -p tcp -j CT --timeout test-tcp
 dmesg - xt_CT: Timeout policy `test-tcp' can only be used by L3 protocol number 25000

The CT target bails out with incorrect layer 3 protocol number.

Fixes: 6c1fd7dc ("netfilter: cttimeout: decouple timeout policy from nfnetlink_cttimeout object")
Reported-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Now that cttimeout support for nft_ct is in place, these should depend
on CONFIG_NF_CONNTRACK_TIMEOUT otherwise we can crash when dumping the
policy if this option is not enabled.

[   71.600121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[...]
[   71.600141] CPU: 3 PID: 7612 Comm: nft Not tainted 4.18.0+ #246
[...]
[   71.600188] Call Trace:
[   71.600201]  ? nft_ct_timeout_obj_dump+0xc6/0xf0 [nft_ct]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Doug Smythies says:
  Sometimes it is desirable to temporarily disable, or clear,
  the iptables rule set on a computer being controlled via a
  secure shell session (SSH). While unwise on an internet facing
  computer, I also do it often on non-internet accessible computers
  while testing. Recently, this has become problematic, with the
  SSH session being dropped upon re-load of the rule set.

The problem is that when all rules are deleted, conntrack hooks get
unregistered.

In case the rules are re-added later, its possible that tcp window
has moved far enough so that all packets are considered invalid (out of
window) until entry expires (which can take forever, default
established timeout is 5 days).

Fix this by clearing maxwin of existing tcp connections on register.

v2: don't touch entries on hook removal.
v3: remove obsolete expiry check.
Reported-by: Doug Smythies <dsmythies@telus.net>
Fixes: 4d3a57f2 ("netfilter: conntrack: do not enable connection tracking unless needed")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Quectel EP06 (and EM06/EG06) supports dynamic configuration of USB
interfaces, without the device changing VID/PID or configuration number.
When the configuration is updated and interfaces are added/removed, the
interface numbers change. This means that the current code for matching
EP06 does not work.

This patch removes the current EP06 interface number match, and replaces
it with a match on class, subclass and protocol. Unfortunately, matching
on those three alone is not enough, as the diag interface exports the
same values as QMI. The other serial interfaces + adb export different
values and do not match.

The diag interface only has two endpoints, while the QMI interface has
three. I have therefore added a check for number of interfaces, and we
ignore the interface if the number of endpoints equals two.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>