- 10 Apr, 2012 25 commits
-
-
Ondrej Zary authored
Add PnP support to the new ISA radio framework. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
These two IOCTLS are obsoleted by VIDIOC_SUBDEV_G_SELECTION and VIDIOC_SUBDEV_S_SELECTION. Mark them obsolete. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Add documentation for V4L2 subdev selection API. This changes also experimental V4L2 subdev API so that scaling now works through selection API only. Signed-off-by:
-
Sakari Ailus authored
Add svga and dia files for V4L2 subdev selections documentation. Signed-off-by:
-
Gianluca Gennari authored
Get rid of several unused parameters in struct em28xx_usb_isoc_ctl. Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Signed-off-by:
-
Gianluca Gennari authored
Stop the URBs in em28xx_stop_streaming(), so that em28xx_irq_callback() cannot be called after the streaming has stopped. This should eliminate the crashes reported by Antti Palosaari and the warnings reported by Andy Furniss. Signed-off-by:
-
Bhupesh Sharma authored
This patch removes the non-required spinlock acquire/release calls on 'queue_irqlock' from 'uvc_queue_next_buffer' routine. This routine is called from 'video->encode' function (which translates to either 'uvc_video_encode_bulk' or 'uvc_video_encode_isoc') in 'uvc_video.c'. As, the 'video->encode' routines are called with 'queue_irqlock' already held, so acquiring a 'queue_irqlock' again in 'uvc_queue_next_buffer' routine causes a spin lock recursion. Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@st.com> Acked-by:
-
Konstantin Khlebnikov authored
Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: linux-media@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: "Arve Hjønnevåg" <arve@android.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Carpenter authored
copy_in_user() already checks for write permission, so we don't need to do it here. This was added in 1a5e4c86 "[media] uvcvideo: Implement compat_ioctl32 for custom ioctls". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Srinivas Kandagatla authored
This patch removes BUG_ON in ir_raw_event_thread which IMO is a over-kill, and this kills the ir_raw_event_thread too. With a bit of additional logic in this patch, we nomore need to kill this thread. Other disadvantage of having a BUG-ON is, wake_up_process(dev->raw->thread) called on dead thread via ir_raw_event_handle will result in total lockup in SMP system. Advantage of this patch is ir-raw event thread is left in a usable state even if the fifo does not have enough bytes. This patch sets the thread into TASK_INTERRUPTIBLE if raw-fifo has less then sizeof(struct ir_raw_event) bytes. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by:
-
Javier Martin authored
Userptr can be very useful if this device is requested to use video buffers allocated by another processing device. So that buffers don't need to be copied. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
Gianluca Gennari authored
The lirc sasem and imon drivers now use the module_usb_driver macro, so the old init/exit function prototypes are useless. This patch eliminates this warnings: media_build/v4l/lirc_imon.c:74:19: warning: 'imon_init' declared 'static' but never defined [-Wunused-function] media_build/v4l/lirc_imon.c:75:20: warning: 'imon_exit' declared 'static' but never defined [-Wunused-function] media_build/v4l/lirc_sasem.c:84:19: warning: 'sasem_init' declared 'static' but never defined [-Wunused-function] media_build/v4l/lirc_sasem.c:85:20: warning: 'sasem_exit' declared 'static' but never defined [-Wunused-function] Signed-off-by:
-
Sylwester Nawrocki authored
In this driver there are several entities associated with separate platform or I2C client devices, which may get probed in random order. When the platform device bound to the media device driver is probed all other entity drivers need to be already in place and initialized. If any of them is not, fail the media device probe and return an error indicating we need to be retried once any new driver gets registered. The media device driver probe will not succeed until there are available all needed sub-drivers, as specified in the platform data. While at it, make sure the s5p-csis module (MIPI-CSI receiver driver) does not get unloaded when in use, by guarding its usage with try_module_get/module_put. This patch is a prerequisite for adding the device tree support. It now also allows again to unbind/bind the driver at runtime from user space via sysfs. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
irq is used only locally and num_clocks is constant, so remove them. Signed-off-by:
-
Sylwester Nawrocki authored
Remove redundant H/W setup logic by merging fimc_prepare_config() and the device_run() callback. Signed-off-by:
-
Sylwester Nawrocki authored
Access to the memory-to-memory video node is serialized through a mutex so now there is no point in having per device context structure spinlock. Signed-off-by:
-
Sylwester Nawrocki authored
This patch prevents blocking on DQBUF at a video capture node in some conditions, after STREAOMOFF/STREAMON sequence. The ST_CAPT_SUSPEND flag should not be set during normal stream off, otherwise the capture engine is not properly enabled at stream on. Reported-by:
Bernard Debbasch <b.debbasch@ssi.samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
The MIPI-CSI2 data alignment parameter can be derived from media bus pixel code, so it can be now dropped from the platform data structure. This is a prerequisite for adding the device tree support. Once this patch is merged the corresponding fields will be removed from the drivers' public headers and corresponding board files. Signed-off-by:
-
Sakari Ailus authored
Fall back to s_selection if s_crop isn't implemented by a driver. Same for g_selection / g_crop. Signed-off-by:
-
Sakari Ailus authored
Unify functions to get try pointers and validate the pad number accessed by the user. Signed-off-by:
-
Sakari Ailus authored
vdev_to_v4l2_subdev() should return struct v4l2_subdev *, not void *. Fix this. Signed-off-by:
-
Sakari Ailus authored
Add support for VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION IOCTLs. They replace functionality provided by VIDIOC_SUBDEV_S_CROP and VIDIOC_SUBDEV_G_CROP IOCTLs and also add new functionality (composing). VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP continue to be supported. Signed-off-by:
-
Sakari Ailus authored
Add an integer menu test control for the vivi driver. Signed-off-by:
-
Sakari Ailus authored
Signed-off-by:
-
Sakari Ailus authored
Create a new control type called V4L2_CTRL_TYPE_INTEGER_MENU. Integer menu controls are just like menu controls but the menu items are 64-bit integers rather than strings. Signed-off-by:
-
- 09 Apr, 2012 15 commits
-
-
Dan Carpenter authored
We don't use this any more after 3be5bb71 "[media] mxl111sf: fix error on stream stop in mxl111sf_ep6_streaming_ctrl()" and it makes GCC complain. Signed-off-by:
-
Antti Palosaari authored
Seems like tuners used for frontend0 are not behind demodulator I2C-gate thus gate control is not needed. Disable it for sure as it can cause problems some situations. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Add and rename "Afatech AF9035 reference design" as a first device in the list since it sounds logical to keep reference design IDs on top of the list. Signed-off-by:
-
Antti Palosaari authored
Change function to use same logic than existing functions. Debugs log writings are done in error case, earlier it was just returning error code. Signed-off-by:
-
Pierangelo Terzulli authored
[crope@iki.fi: applied manually since erroneous patch] Signed-off-by:
Pierangelo Terzulli <pierigno@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Minor functionality and style changes. Signed-off-by:
-
Gianluca Gennari authored
Implement the get_frontend function. The code is derived from the old af9033 driver by Antti Palosaari. Signed-off-by:
-
Antti Palosaari authored
AF9035 code needed for IT9135 chip support. Needs still small changes for AF9033 and totally new tuner driver in order to get that chip version working. Signed-off-by:
-
Michael Büsch authored
Now that i2c transfers are fixed, 3 retries are enough. Signed-off-by:
Michael Buesch <m@bues.ch> Signed-off-by:
-
Michael Büsch authored
Use usleep_range() instead of msleep() to improve power saving opportunities. Signed-off-by:
-
Michael Büsch authored
Use usleep_range() instead of msleep() to improve power saving opportunities. Signed-off-by:
-
Antti Palosaari authored
There was a bug I2C adapter writes and reads one byte too much. As the most I2C clients has auto-increment register addressing this leads next register from the target register overwritten by garbage data. As a change remove whole register address byte usage and write data directly to the I2C bus without saying what are register address bytes to firmware. Signed-off-by:
-
Gianluca Gennari authored
Let's save a few lines of code using the module_usb_driver macro. Signed-off-by:
-
Gianluca Gennari authored
Add basic support for the tda18218 tuner and the AVerMedia A835 devices. Signed-off-by:
-
Gianluca Gennari authored
New USB id for the Avermedia A867 stick (Sky Digital Key with blue led). Signed-off-by:
-
