- 09 Jul, 2012 40 commits
-
-
Eric Lapuyade authored
There can ever be only one call to nfc_targets_found() after polling has been engaged. This could be from a target discovered event from the driver, or from an error handler to notify poll will never complete. Signed-off-by:
Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Eric Lapuyade authored
If there is an ongoing HCI command executing, it will be completed, thereby pushing the error up to the core. Otherwise, HCI will directly notify the core with the error. Signed-off-by:
-
Eric Lapuyade authored
HCI cmd can be completed either from an HCI response or from an internal driver or HCI error. This requires to factorize the completion code outside of the device lock. Signed-off-by:
-
Eric Lapuyade authored
This API should be used by drivers, HCI, SHDLC or NCI stacks to report an unrecoverable error. Signed-off-by:
-
Eric Lapuyade authored
An HCI command can complete either from an HCI response (with an HCI result) or as a consequence of any other system error during processing. The completion therefore needs to take a standard errno code. The HCI response will convert its result to a standard errno before calling the completion. Signed-off-by:
-
Eric Lapuyade authored
We can now report an ENOMEM error up to the HCI layer. Signed-off-by:
-
Eric Lapuyade authored
nfc_hci_recv_frame can not be called with a NULL skb. Signed-off-by:
-
Eric Lapuyade authored
shdlc reset may leave HCI in an inconsistent state by loosing parts of HCI frames. Handle this case by reporting an unrecoverable error to HCI. Signed-off-by:
-
Eric Lapuyade authored
The questions asked in the comments have been answered and addressed. Signed-off-by:
-
Eric Lapuyade authored
Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Its safe to stop the BTCOEX timers 'period_timer' and 'no_stomp_timer' before disabling BTCOEX. These timers can call ath9k_hw_btcoex_enable (or) change the BT stomp type if they seem to be running after we had called ath9k_hw_btcoex_disable, which is obviously not correct. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
We are doing MCI cleanup eventhough BTCOEX is not enabled via module parameter. This means we do ath_mci_cleanup though we skipped calling ath_mci_setup. Yet it does not causes any issues now as we free the DMA buffer allocated only when it is allocated during ath_mci_setup. Reviewed-by:
Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by:
-
Rafał Miłecki authored
Having bus number printed makes it much easier to anaylze logs on systems with more buses. For example Netgear WNDR4500 has 3 AMBA buses in total, which makes standard log really messy. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Specs were updated, change code to match it. Signed-off-by:
-
Arend van Spriel authored
This patch fixes an OOPS in brcmsmac driver, which was introduced by the 11ad patch 'cfg80211: add 802.11ad (60gHz band) support'. The value IEEE80211_NUM_BANDS increased, which was used in the brcms_c_regd_init() function. Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Cc: Johannes Berg <johannes.berg@intel.com> Acked-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Acked-by:
Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Oskar Schirmer authored
In the list of commands CMD_802_11_EEPROM_ACCESS had been defined twice, unnecessarily, luckily with same value. Remove one occurence. Signed-off-by:
Oskar Schirmer <oskar@scara.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Amitkumar Karwar authored
This enables user to set mode of Tx/Rx path using "iw set antenna" command. For non MIMO chips, the command will be used for selecting specific antenna or configuring antenna diversity mode. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Rajkumar Manoharan authored
On full reset, mci reset will put LNA update on 2G mode. And Whenever 2g5g_switch is forced at the end of full reset, lna update should not be skipped. Not doing so, is affecting WLAN rx and causing beacon loss when BTCOEX is enabled on AR9462. Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
The chip is waken up for every 45ms in btcoex timer cycle to for sharing the radio between BT and WLAN. Whenever the wlan interface is in network sleep mode, do not schedule hw timers. This could reduce power consumption on idle associated state. Signed-off-by:
-
Rajkumar Manoharan authored
As soon as the interface brought up, btcoex timer starts running eventhough the interface is in idle state and WLAN chip is moved to full sleep mode. There is no point in running btcoex timer when the wlan interface is in sleep mode and also it might consumes more power on WLAN idle unassociated state. So lets stop the btcoex when wlan is idle state. Signed-off-by:
-
